1723 / Configure VPN To Access Remote LAN Network On Windows 7?
Sep 10, 2012
I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough
I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all
I've get:
IP Address: 192.168.1.101
Mask: 255.255.255.255
Gateway: (none)
LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?
View 2 Replies
ADVERTISEMENT
Sep 23, 2011
I am trying to configure remote access VPN to my network, i have a Cisco ASA 5510 IOS 7.0(7).
I configured the VPN using ASDM 5.0.9 and below is the configuration received:
access-list 90 extended permit ip 192.xxx.xxx.0 255.255.255.0 192.xxx.xxx.248 255.255.255.248
access-list ClientVPN_splitTunnelAcl standard permit 192.xxx.xxx.0 255.255.255.0
ip local pool VPNIpPool 192.xxx.xxx.250-192.xxx.xxx.252 mask 255.255.255.0[code].....
View 5 Replies
View Related
Jan 22, 2013
I am trying to configure Remote Access VPN in our Cicco ASA 5520 firewall through SSL VPN wizard. I tried to configure Anyconnect VPN client option, but after entering user/pass it gives error "An error was received from the secure gateway in response to the VPN negotiation request. Please contact your network administrator. The following message was received from the remote VPN device: No assigned address"
As looking online there is no easy step-by-step option for same. I want to provide Remote Access VPN to some of our user abroad who should have access to few server applications and no internet access.
View 8 Replies
View Related
Mar 21, 2012
I'm trying to configure a VPN remote access type on a SA520-k9 but i don't know why doesn't work.
My Internal network is 192.168.131.0/24 and my Wan Ip is 87.216.xxx.xxx.
on Remote WAN's IP Address / FQDN i put the WAN IP 87.216.xxx.xxx on Local WAN's IP Address / FQDN I put the cisco SA520 Ip. I think this is the problem.
I create a IPsec user. I create a firewall rule from WAN interface to SA520 Ip with IPSEC-UDP-ENCAP service.
View 3 Replies
View Related
Aug 28, 2012
Is it possible to configure a Westell 6200 DSL modem to accept access via a remote PC? I have a security camera that can be viewed via remote computer access, but I cannot configure my modem to accept a remote access.
View 3 Replies
View Related
Jun 4, 2013
Our ASA 5510 was configured with a public interface, a DMZ interface, and a private interface. I have a remote access VPN using AnyConnect client and LDAP authentication for Active Directory. We are changing ISP (groan!), which means all new public IP addresses. The new circuit is installed, so I have a second public interface (same security level as the first public interface, wholly different IP address range) enabled on the ASA. I hope to transition whatever I can, which means get the VPN access through either public interface. Can I just enable client access on the second public interface at the Anyconnect Connection Profiles tab in ASDM? That seems too simple. Can they share the one address pool?
View 1 Replies
View Related
Apr 16, 2012
i have cisco ASA5520 and i have a remote access vpn .I want to configure logging for this remote access vpn.
i want the time user connected .how log it is connected .If any error while connecting ?
View 4 Replies
View Related
Aug 12, 2012
I am adding a second external connection to an existing system on an ASA 5510 with ASA V8.2 and ASDM 6.4. I added the new WAN using an other interface (newwan).
The intention is to route most internet traffic over the new route/interface (newwan) but keep our existing VPNs using the former interface (outside).
I used the ASDM GUI to make the changes and most of it works.ie. The default route goes via (newwan). Outgoing VPNs of a site to site nature use the previous route via (outside) as they now have static routes to achieve this.
The only problem is that incomming Remote Access Anyconnect VPNs are not working. I set the default static route to use the new interface (newwan) and the default tunneled route to be via (outside) but this is the point is goes wrong....
I can no longer ping the outside IP address from an external location. It seems the outside interface does not send traffic back to the - outside interface (or at least that's where I think the problem lies). How do I force replies to the incomming VPN remote traffic from unknown IPs to go back out on the outside interface?
The only change I need to make to get everything working on the outside interface again is to make the Default Static route use the outside interface. Which puts all the internet traffic back on the original (outside) connection.
View 6 Replies
View Related
Mar 22, 2011
I am configuring remote access VPN on a cisco router 3845. Works fine.
I was looking for configuring session and idle time configuration for groups and eventually users.
I am using the following Cisco VPN remote access configuration :
crypto isakmp client configuration group mygroup
key xxx
pool mypool
acl 101
max-logins 3
banner ^CHelloo ^C
Is there any command in cisco ios similar to Cisco ASA vpn group 1 session-timeout?
View 1 Replies
View Related
Oct 9, 2012
I am trying to configure RV082 router with Mac Native VPN Client for my remote access. However, no matter what I did, I am not able to make it works. Can any one can give me an example of how to conguration my RV082 router and Mac Book Pro(Mountain Lion)?
View 2 Replies
View Related
May 28, 2011
I work from a remote location, and use a VPN to access files on the company server. I have no problem logging into the VPN, but when using Windows 7 64-bit, I am denied access to the specific folder containing the files I need, even though I can see and open other folders on the same server.
However, if I connect from an old laptop running Windows 2000, I get a login pop-up when I click on the desired folder and after entering my username (including the remote domain name) and password I can access the files. In the newer OS, I just get a stock "access denied" message, with no option to log in. Specifically, in W7 the message is "You do not have permission to access this folder", which is nonsense.
Our IT department is baffled. How to set up W7 so it will allow me to log into the protected folder in the same way I can do it in W2K? Once logged in to the VPN itself, I use the 'run' command with the remote IP address to bring up the folders in a normal Explorer window.
View 3 Replies
View Related
Jan 19, 2012
I have a need to be able to remotely access, from my laptop running Vista, eight computers on different networks, all running Windows 7 Home SP 1, 64 bit. I have discovered there is an issue with remote access and SP 1.To give a little more info, I am in a group organizing two afterschool programs in two different churches. Each church will have 4 laptops (Win 7 SP1). I need to be able to remotely access each computer from my home at various times to provide reports on usuage, and to troubleshoot any problems. The cost to purchase a program is prohibitive, as this is a non-profit venture to assist kids in need.
View 7 Replies
View Related
Jan 26, 2013
Region : Singapore
Model : TL-WDR4300
Hardware Version : V1
I need to set up remote access to my HDD connected to my WDR4300, so I can always go online when I am out to retrieve the saved files in the HDD. However I have zero knowledge of network setting of the FTP servers, I can gain access when I am home and connected to the Wireless network, but how to gain access remotely.
View 6 Replies
View Related
Feb 22, 2011
Recently i have received one of my collegue's laptop that is running windows 7.I have installed cisco VPN client version 5.0.07.0290 on it and VPN client appears to connect to our ASA5540, but we are unable to connect (remote desktop) to any machines on our network as it does on our XP laptops. Furthermore, we cannot ping any as well. Also, while connected the Windows 7 machine is still able to access internet site as if split-tunneling was configured, which its not.
But after some searching , i found from "routeprint" output (shown below ) that my local internet gateway is prefered over the VPN gateway which is 10.10.4.1.Here 10.10.4.19 is the IP address assigned for VPN adaptor.
Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.2 25 0.0.0.0 0.0.0.0 10.10.4.1 10.10.4.19 100
But after i manually add the below route on windows 7 laptop , it started connecting to remote desktop successfully.
route change 0.0.0.0 mask 0.0.0.0 10.10.4.1 metric 20
But aftersome time of idle state , it is again going back to original route state of prefering the local gateway of 192.168.1.2 and thus unable to connect to Remote Desktop again.
View 3 Replies
View Related
Jul 13, 2011
I would like to allow remote access to a windows server through a ASA (5505) firewall. Users will use the vpn connection in order to connect to a private network. Is there any link that describes the steps for ASDM?
View 3 Replies
View Related
May 7, 2012
I have created remote access vpn in my ASA 5505. The tunnel is established but i am not able to access the internal network.
View 3 Replies
View Related
Jan 6, 2012
I can not find the option "Use windows to configure wireless network."
This is what I have done so far:
Control Panel> Network and Internet Connection> Network Connections> Right-click Wireless Network Connection> Properties and a window with two headings opens: General and Advance. There is no "Use windows to configure wireless network" option.
View 3 Replies
View Related
Jun 28, 2012
I am attempting to configure Radius authentication accross a site-to-site VPN for my ASA 5510-01 for remote access.
ASA5510-1 currently has a live site to site to ASA5510-2.
ASA 5510-1 - 10.192.0.253
ASA 5510-2 - 172.16.102.1
DC - 172.16.102.10
ASA5510-01 can ping the DC and vica versa but is unable to authticate when i perform a test. ASA5510-01 can authenticate to a DC on it;s own LAN but not on the remote LAN that DC sits on.
I have double checked the 'Server Secret Key' and ports as well as various users which all work locallly. ASA5510-02 authenticates to DC with no problems.
View 3 Replies
View Related
May 4, 2011
I'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
View 1 Replies
View Related
Mar 29, 2011
How to configure in windows server 2008 network NIC1 is WAN and NIC2 is LAN?
View 1 Replies
View Related
Dec 20, 2010
i have a user in LAN which needs access to remote PPTP server. My router uses NAT NVI for some reasons to provide internet access.
Problem is what tcp/1723 is NATed successfully and it appears what GRE traffic is NATed as well, but GRE packets are NOT passed back to user on LAN.
Config is that simple:
interface Fas4
ip address x.x.x.x x.x.x.x
ip nat enable
interface Vlan1
ip address 10.0.0.1 255.255.255.0
ip nat enable
ip access-list extended nat_clients
permit ip 10.0.0.0 0.0.0.255 any
ip nat source list nat_clients interface Fas4(code)
View 2 Replies
View Related
Jul 31, 2011
I have Nas storage AirNas 350 how ro setup my network to have remote access to NAS ftp ?i have TP-LINK TL-R480T+ with two wan ports with two modems (Cabble and ADSL 2+ both with dynamic IP) also i registered on www.no-ip.com I success to go direct to ADSL modem with no-ip service but i not need that i need to access to NAS storage.Nas ftp work perfect in local network but i need remote access over tha internet. How to setup that?
View 1 Replies
View Related
Jan 3, 2013
How to use my iPhone 5 using 3G or LTE to connect to my home wifi network so I can control things like my airconditioner (using the supplied app) which is also connected to the home wifi network?I have a WHS a Windows 8 machine and an XP Pro machine. I am using a Linksys WAG320N Router/Modem.
View 1 Replies
View Related
Oct 12, 2012
I suspect that he did something and gained remote access to my computer.I found out about it when I checked my wireless connections on my router and found his name on the network : Steve's - Iphone and a couple of unfamiliar connections. I then opened my task manager and ended some tasks I thought were possibly infected. When I went back to the wireless status, the unfamiliar connections disappeared.
I use Norton firewall + kaspersky internet security and my virus definitions have always been up to date, but I cannot detect anything. I also set my options to permit only MAC authenticated computers and changed my wireless WPA/WPA2 key, but every time I turn my wireless on, this guy somehow is connected to my network. [code]
View 4 Replies
View Related
Sep 27, 2012
i want my ASA 5505 8.2(5) to access my proxy server on remote lan through VPN my VPN is OK, all PCs of local network can access to remote network.but ASA on local network can't access to remote network.i think it's a NAT problem but ....
local network 192.168.157.0/24 local IP ASA 192.168.157.1
remote netword 10.28.0.0 /16
remote proxy 10.28.1.26
my conf
[code]....
View 1 Replies
View Related
Jun 27, 2013
I have a network printer (HL-2250DN) that I want to also reach from outside the home network. In the network it is reachable by 192.168.0.103 Now I used a DNS service to map my external IP to a domain name. How can I now access my printer? myprinter.no-ip.org is mapping to my external ip. But how can I forward this to my printer?On my router I'm forwarding port 80, 631 and 646 for the IP 192.168.0.103. But still it is not working.
View 1 Replies
View Related
Sep 5, 2011
I have a network printer (HL-2250DN) that I want to also reach from outside the home network. In the network it is reachable by 192.168.0.103
Now I used a DNS service to map my external IP to a domain name. How can I now access my printer? myprinter.no-ip.org is mapping to my external ip. But how can I forward this to my printer?$
On my router I'm forwarding port 80, 631 and 646 for the IP 192.168.0.103. But still it is not working. W
View 4 Replies
View Related
Mar 14, 2011
I am trying to build a remote vpn in ASA 5520 Software Version 8.3(1). I am using ASDM 6.3(1) for the configuration. I went through the SSL VPN wizard and did the configuration. I tried connecting to the ASA using anyconnect VPN and I could successfully connect the VPN. My home laptop takes an IP 192.168.60.21 (which I have defined in the wizard). Now my issue is, I can't access any office internal network from this laptop (none of the internal IP is ping ing even). Meanwhile, I could ping and rdp to this laptop(which is connectd by anyconnect VPN) from my office network. One thing I noticed is that when I give a traceroute to an internal IP from the laptop, the first hop goes to my home ISP router.
View 8 Replies
View Related
Oct 18, 2011
i have a problem with my asa 5505 Remote VPN Connection with local network access , the VPn is working fine and connected , but the problem is i can't reach my inside network connection of 192.168.30.x , here is my configuration
ASA Version 8.2(1)
!
!
interface Vlan1
[Code].....
View 13 Replies
View Related
Apr 3, 2013
I´m tring to configure ASA 5505 with VPN Cleint, to access a remote network over a L2L with another ASA 5505, but no sucess. Is there any special feature to this work?
View 2 Replies
View Related
Sep 6, 2010
in our VPN configuration (ASA5520, Anyconnect VPN Client), we have different VPN User Groups. These Group Policies are retrieved from an LDAP Server.We'd like to restrict the acess like this:
A Group "Home User" might establish a VPN from anywhere on the Internet
A Group "restricted 3rd party" should only be allowed to establish a VPN from their specific public Source IP Address on the Internet (the public IP Address of this 3rd party Company). When these Users try to connect from any other IP Address on the Internet(Home, hotel, etc), VPN Access should not work!
On our old solution, we were able to limit the remote access network, per user group, to some source IP's.
The IP Filters related to group policies in here seem only to be filters concerning the VPN Address (after the VPN is established: where can this user group connect to). But I did not find filters/access lists, where yoiu can define/restrict public access networks for some groups.Or is it possible to do that by Dynamic Access Policies? How?
View 1 Replies
View Related
Jun 24, 2012
I have a Cisco ASA 5505, with basic 50 license, that is connected directly to the Cable Modem with a public IP. I have VPN configured and active on the Outside interface. When we connect, we connect just fine with no errors, but we are not able to access any resources on the remote network.
ASA IOS version 8.2(5)
Remote Network IP: 10.0.0.0/24
VPN IP Pool: 192.168.102.10 - 25
View 4 Replies
View Related
Jul 17, 2012
Where did I need to go on the Concentrator to disable tcp 1723 and 10000? We don't require these to be open and our pen test shows these as being open.
View 1 Replies
View Related
