I am currently planning a Active directory deployment. It will most likely be a new forest, but the domain could become part of a existing forest. I have about 45 Computers with about 85 users. At one time there is about 42 users logging in as there is two shifts. The logons will be done all at once. Do you think two domain controllers will be able to handle the load?
View 9 RepliesIn my office we are using two networks , one is 16.x.x.x and another on is 15.x.x.x . 16.x.x.x having the domain controller. 15.x.x.x is only connected with Workgroup. my question is it possible to add 15.x.x.x network system into 16.x.x.x network . I tried to add but it gave error message "Domain Controller can not be contacted". Generally we cant add it into the domain i know that. is there anyway to connect the 15.x.x.x systems into 16.x.x.x domain using router in the network.
View 1 Replies View RelatedType: Error
EventID: 1054
Description: Windows cannot obtain the domain controller name for your computer network. The specified domain either does not exist or could not be contacted. Group Policy processing aborted.
Dad's work laptop (XP) will no longer connect to any wifi at all. I removed the Intel PRO/set wireless utility so it would default to windows, enabled the Wireless Zero Config. It will acknowledge the network, attempt to get an IP address from the network for 1 minute, then it rotates down to the next network SSID in queue (I have 3 SSID's in our house). When it reaches the end, it just goes back to the "Windows is not connected to any wireless networks" message.
In 2004 I had a small home network of an NT4 domain controller with a 98 client and an XP client and an NT4 workstation laptop.ll was fine with the NT4 server providing a central store and print queue for a networked laser.Over time the laptop has been replaced with a Win7 (which will access the files but really doesn't the NT4 domain.) The Win98 has died and now finally the NT4 sever has gone too.I intend to revert now to a workgroup type set-up and forget about domains (I don't need it really) My problem is if I remove my XP machine from the domain I loose all the program menu, shortcuts desktop etc. which are stored under the domain user name login.Can I retrieve these or at least look at them so I can set up the local XP administrator account with all my familiar stuff.
View 3 Replies View RelatedI hav windows server 2003 w/ 3 clients on my home network.2 of these machines link w/ server when i formatted & try to link 3rd machine it says "A domain controller for the domain fits.local could not be contacted" this problem I have 2003 server + isa server 2004 + exchange server 2003 installed in one core i3 machine..........
View 9 Replies View RelatedWe relocated several servers to our DMZ and, without a domain controller in the DMZ (we plan to put a RODC in the DMZ later when we mvoe to Windows Server 2008), i punch through the standard recommended TCP ports. ports 88,135, 389, 53, etc.) to the internal network located DC. I am double hopping to the DC (I hope thast doesn't matter) as the DMZ located web server communicates to another IP address in the same DMZ network and then I NAT that address to the internal IP address of the DC. Everything seems to be working for the servers we moved to the DMZ but i think i don't have all the necessary TCP/UDP ports punched through because we have found that logging into the DMZ servers is taking an extended amount of time, sitting on the “applying settings” screen. For 2-34 minutes. Also, we noticed that our applciations fols have to now add the fully qualified domain names when making calls to servers that just needed the domain name. When i open the access-list up completely without opening specific TCP/UDP ports, the issue is resolved.
View 4 Replies View RelatedI am having trouble adding a computer to the Domain Controller. I have a cable modem running into a di-524 router. The router has DHCP and DNS relay disabled. I set the LAN IP Address of the router to 192.168.2.1. The router is connected to a switch with 10 pc's and a server running 2003. The server has an IP Address of 192.168.2.2. I setup a DHCP server inside 2003 with a scope of 192.168.2.100-192.168.2.199. Under scope options the router is set to 192.168.2.1 and DNS Servers is set to 192.168.2.2 (the ip address of the domain controller). When I try to add the computer it cannot contact the domain controller. Is there something wrong with my DHCP config or DNS?
View 3 Replies View Relatedo create a domain host
View 2 Replies View RelatedHow has file server been affected by promoting your server to a domain controller? and what are file sever actually do?
View 3 Replies View RelatedI have only one PC. I use cross cable for setup Domain controller. Than network icon show available network but it is just only send and can't received.
View 1 Replies View RelatedI have a small network: - Domain server - Terminal Server - DB Server SQL 2008 (windows authentification) Usually, user lost connection to the domain.
View 1 Replies View Relatedwe have using 10 system with domain contorller connected to network once disconnect server i cant acces to local systen ( per to per )
View 1 Replies View Relatedwhat i am trying to accomplish is to set up a domain for my home network. the domain is going to consist of 2 server boxes both running ubuntu 12.10 server edition and a client machine running windows XPone linux box will be my DC using samba and the other will host email, and apache2 web services.i dont know if you need all of this info but in my experience its best to be thorough.I registered a domain through godaddy.com and made it point to my home IP address. now what happens because all of my machines are behind a router is when i type in my URL it brings up the login request for the cicsco webinterface. what i would like to happen is that my router points traffic to the ip address on my home net work 192.168.1.XXX that is hosting the apache2 webserver.I would also like to connect the client(XP) machine to the domain controller but i keep getting an error that says that the domain does not exist. I have been through the samba settings and they are exactly the same as when i set them up for a mock PDC using "example.com" as a domain name
View 1 Replies View RelatedMy Primary Domain Server is down and i have to format the server. I have 2 Additional domain controllers. How do I add DC after formating the server in the same domain.
View 1 Replies View RelatedWithin ACS 5.2, does any know of a way to see which specific domain controller a request is sent to?
View 1 Replies View RelatedI try to join an ACS v. 5.3 to the domain. For my acs in Location A, I can join without problems using my account. When I try to join the ACS in location B to the same domain with the same account, it doesnt work.I looked at the debug log files for the ad client, and noticed, that the ACS in location B goes to a certain Domain Controller. However, I would have expected the ACS to contact another DC, which is located on the same location as the ACS ... this doesnt happen.
My question: How does the ACS determine what DC to contact ? Is it possible to force the AC to join by connecting a certain DC ?
We have a remote site with ~5 users, 4 IP phones and a network printer. Right now we have an old Win2003 box serving as the DC for that site. It is connected back to us via 10MB layer 3 routing on a HP 5500G-EL switch. This windows server is getting quite old and I'd like to avoid the expense of buying a new server just to hand out addresses and authenticate users. How do you all handle login authentication,dns,and DHCP for your lightweight remotes sites?
View 11 Replies View RelatedI am trying to set up the SG300-52 and am struggling, I have a domain controller with IP address 192.168.0.1 I have a broadband router that is has a dynamc ip address. I have set up vlan1 aand vlan2
Vlan1 is getting its ip address from the domain which is 192.168.0.110
vlan2 is getting its ip from the broadband router.
I have setup Domain Name System in the Ip configuration tab
on Vlan1 I have a connected a dumb switch this connects all the computers in the local network. What I cannot get to work is the internet vlan.
who has setup up vlan routing with domain controller
On our ASA5510 in the area AAA Server Groups, there is an entry for LDAP and an object that refers to our 2003 Domain Controller. This DC has LDAP over SSL enabled and I can see the DN and Password for a domain user account.I've created two new DC's, both R2 2008 but when I enable these in the same way it says it could not authenticate, ERROR auth server not responding, AAA group removed.I thought this had something to do with CA being installed on a DC, but it's not running as a service on the DC that was already referred to.
View 2 Replies View RelatedIs there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
View 5 Replies View RelatedI have a Nexus 7000 Core Switch , and i need to allow the domain controller ip 10.x.x.x for DHCP relay on switch.
View 2 Replies View RelatedThis is one I am having a hard time finding an answer for. How many clients can a 3600 AP support? For 150 clients on one of these, what would the throughput be for each client?
If my calculations are correct, the device can deliver 420 Mbps, which gives each client roughly 2.8Mbps. Is this correct?
I have two ASA5510 each with a security plus license and 10 SSL VPN licenses, in active/standby mode at version 8.4(4)1. It only allows up to two vpn clients (AnyConnect & SSL VPN) at a time, any extra vpn client would receieve "Login Failed" message.
View 2 Replies View RelatedWhat the maximum concurrent users you can have on a Cisco 3925 for :-
1) Site to Site VPN using IPSEC tunnels
2) GRE tunnel sIf I have 90 users on a single GRE tunnel with 50mb Internet pipe using fat clients will this work ?
We are having random issues of users not being able to connect to our wireless network consistently. The users will have successfully accessed the network previously but then will have difficulty associating to the network. After a period of time, the association appears successful again. My first thoughts were that there was a restriction on the number of clients that could associate to a given AP at any one time.This is the equipment we have:1x Cisco Wireless Control Server (WCS) 6.0.181.04x Cisco 5508 Wireless LAN Controllers 6.0.196.060x Aironet 1142N Lightweight Access Points (LAP) Is there a hard or recommended maximum number of clients per LAP? If so, where is this defined? From what I have read on these forums, Cisco apparently recommends about 25 clients per AP but I can not find any official documentation to support this.When I go to WCS Home > General > Top APs by Client Count, the top AP reports 20 clients. However, if I click on the AP Name and go to the Current Associated Clients tab, it is only listing 8 clients - why is this?
View 3 Replies View RelatedWe have a PIX 501 and I'm in the process of replacing it with a ASA5505. We're currently using the 501 for a site-to-site vpn for disaster recovery purposes and I'm trying to verify the number of concurrent connections we can have.
View 1 Replies View RelatedI have been looking for the command to view all concurrent active connections or sessions on our Cisco 2911. I want to see what the total connections or sessions are at peak times throughout the day.
View 4 Replies View RelatedWe have a client that is looking to provide connectivity for up to 800 users at a conference. They have a SRP527W available to them. Looking at the configuration we have been able to provide the needed number of IP addresses through VLANs each with their own DHCP scope.
However we are doubtful that the router will be able to process such a high number of connections (NAT, Firewall etc.) even though they will be using a specialised application that pulls static content via WAN.
Thus far we have been told that the unit has supported 150 user no issue, my I am guessing anything over 200 and you would start to see stability issues?
i am going to purchase a Simultaneous Dual Band Router with Gigabit Lan. Can anybody tell me whats the transfer speed it got on Concurrent Dual Band 900(450+450) , 750(300+450) and 600(300+300). I am going to use it for hard drive that can network attached or may be just external hard drive via USB interface.
View 2 Replies View RelatedWhat are the limitations on the max number of concurrent HTTPS connections when using Auth Proxy for HTTPS traffic on a Cisco ASA 5520.
1) What is the max number of concurrent Authentications that the ASA can perform (HTTPS)?
2) Once Authenticated. What is the max number of concurrent HTTPS Authenticated connections to the back end HTTPS server.
Our current cable ISP is having issues providing us with consistant connectivity. I would like to bring in a second ISP to allow my users to choose where they will connect to. There will be two dns names and i just want to to be able to choose between them.
Is this possible on the ASA5505? supporting two ISPs at one time for VPN on both?
in Cisco ASA 5540 Adaptive Security Appliance Platform Capabilities and Capacities, I see Concurrent Sessions: 400,000. Which mean what device can handle 400,000 session and no more. But if I'm using TCP State Bypass Feature (Inbound traffic pass via ASA but Outbound goes via different device). I can see such connections via show conn command with b flag.
My questions: 1. Will this limit (Concurrent Session) affect in this case? Or ASA can handle more such connections (for example 800,000 ...) in bypass state? 2. It's possible to tune timeout for such connection without using global timeout conn? My problem what I want to do by pass tcp connection for one IP with has very high connection/sec rate.
trying to join an 1142 on a WLC_SRE version 7.4.
the AP can ping the controller and vice versa. In the controllers GUI: Monitor>Statisticc>AP join, I can find the mac of the AP that I am trying to get joined.
the details of this mac show:
Last error occurred: Lwapp discovery request rejected
last occurred error reason: Too many concurrent AP image downloads
Last Join Timestamp: