Belkin Routers :: F5D82335 Can't Find Online Info On What Face Lights Mean
Nov 29, 2012
I have a N+ wireless router model F5D82335 and have lost my owners manual. I can't find online info on what the face lights mean. Currently the wireless yellow light flashes about ten times then pauses and flashes again. I have no issues with being able to connect.
Belkin router model FD305v1 no longer being provided any technical support by its Makers.You have to pay for it now. My router went out and first of all it's hard to find any information even on their own website. And if you do you still have to pay them to get it working again
I cant find any info for my router F9K1004 on belkin's support site. I would like to see if there is a firmware update and if there is any info to setup my VPN at home.
I got an old WISE WS-4016 16-port 10/100Mbps Fast Ethernet Switch from a friend of mine which was not in use. However i am unable to find any information regarding this switch anywhere online.Unfortunately we couldn't find any manual for this switch as well.
My F5D8235-4 v.2 N+ suddenly stopped working. The security and modem lights are solid lavender and the storage light is solid amber. The router light is solid blue. Internet has no light.
I have an RV220W with firmware version 1.0.2.4. My ISP makes available IPv6 over PPPoE in a Dual Stack configuration. One of the requirements is that my home router should support prefix delegation. I don't appear to be able to find any information pertaining to PD in relation to the RV220W -
I have an issue with my N750 Wireless router, F9K1103. I have a Windows Home Server, HP Media Smart Server – EX470, that at times causes the router to lose connection, with the front panel light going from Blue (connected) to Orange (disconnected). When I pull the net cable from the server, after about 30 seconds the blue light comes back on.
I can get on the internet and surf just fine but when i go to maps or Gas Buddie, or check in with Facebook it says" my device can not be located. Are location services turned on on the device." I have checked on my ipad and location services are on, on everything. I had no problem with the other router I had. I also have a Sprint Airave connected to my internet, but again i had no problem with the other router. The router is definitely faster than my old one and set up was easy but its very frustrating to not be able to find my location.
I turned a Belkin Surf N300 into an access point using the settings page via IP address, now I can't seem to find that page again so I can switch it back. The model number is F7D6301 v1.
I'm am getting a "Could not find DHCP daemon" error in the router log (N300 router), but when I connect my cable modem directly to my computer it gets an IP address just fine so I doubt the problem is with my modem or ISP. I've tried resetting the modem and router multiple times but no luck.
Manual and firmware not available for my f7d2401nt. The US support page do not find the model, the italian support page find the model but link to the US page ! Someone has at least the manual (englis, french or italian language) ?
I can't find the correct driver for Belkin F9L1101 Version 1 USB Wireless adapter. When I went here [URL] and installed the software my Windows 7 Pro w/64 bit does not recognize the adapter. When I go to Device Manager it does see the Belkin under other devices. When I choose the folder the drivers are located /program files (x86) it says it can't find the driver in that location.
N600 DB on OSX. I keep on reading the material that there is a link on the dashboard that I click on to set up the router manually. Nowhere on the dash board is that link. Where is that link?
Six month ago I installed and configured a wireless mesh with the equipment named. From two weeks ago one AP (MAP) restarts every day. In Wireless Lan Controller appears this logs:
"Unable to find AP entry in the database, could not process statistics information"
My friend made a "troll" account on facebook and he would try and piss people off. Well he said some stuff and one person said they would get someone to track him down even if he used a fake account. I don't think it can be done, but he thinks that they can find him.
I've recently replaced my router with this Belkin (F5D7230uk4) Router, (this one without the wireless reciever Whenever it's used for online gaming, either on my computer, my playstation 3, or my brothers computer the router will lose connection after about 5minutes, then return within about 30 seconds. This happens every single time without exception, and have not been able to play for longer than 10minutes on any occasion since changing the router. I've tried connecting straight to the modem and it all functions correctly with no problems, so I am certain that it is something that needs to be setup with the router. I've searched many forums and posts from people having similar problems, and followed instructions to disable router firewall, disabled UPnP and NAT etc with absolutely no success whatsoever.
I enabled dual stack on my rv042g router but its not recieving ipv6 information from my isp. My isp is Time Warner in Milwaukee. They assure me that they are ipv6 ready and assume the problem is on my end. All they want to do is have me connect one computer up to my modem. What good is that when I have a network that needs service. The router needs to be working not just one pc. My ipv4 is working perfectly. It is obtaining all information automaticly.
Does anyone Know if I can use Siemens cat6 jacks with any other face plate? I can get all Siemens stuff from work, but am not overly fond of how their face plates look to put them all over my house.
One day, my rv042 started emitting a very high pitched sound. The lights will flash upon powerup, but not act normal (indicate link, etc). The router cannot be accessed at all.I changed the power supply to a known working one to eliminate that--didn't work.
Signed onto pc as admin, logged into router with correct user name and password. No page in the browser based configuration displays the complete information for the page. Menus are missing as are option labels, etc. The last time I accessed the router (about a year ago) I didn't have this problem.
I have been given the task of unbricking a WRVS4400N V2 router. It just sits there with the Power and Diag lights blinking and does nothing else.I'm thinking I'm going to have to try to find some way to flash the firmware, because I'm seeing that this is a common problem with this router.I already tried support "chat" online, but after about 20-30 minutes waiting for someone to actually come into the chat room, I gave up.I did note that this model is not being sold anymore and won't be supported before very long, so this may be a gigantic waste of time, but I thought I would give it a shot.
We have a Cisco SRP 527W router that was not showing up on the LAN. so we tried a Factory Default reset but it seems to be dead.
The power light is flashing constantly,the 4 LAN light are constantly on,the DSL Data light comes on for 1 sec when device is powered up.
i have tried connecting directly to a PC, the NIC reports as network cable unplugged.i have tried the (power on device, hold down reset button, power of after 30 sec, power on after 5 sec, release reset button after 5 sec) but still "network cable unplugged".
the firmware flash utility will not find the NIC the device is connected to.the router is less than a year old, is there a fix or is it a warranty replacement ?
XP Home edition, went to tools can't find working off line or working online to make sure off line is not checked so I can get on line DSL Verizon , Wireless router, wireless switch in on, on the cpu
I'm trying to remove my router from my home network and connect my computer directly into the line coming into the house. I'm doing this to, among other things, run some tests to evaluate the impact of my router on my bandwidth.However, removing the line seems to be causing problems.Everything is fine when I'm behind the router, but once I unplug the line from the router and plug it directly into my computer, I can't connect to the internet. I get a "limited or no access" error on my Local Area Network. Once I reconnect the router, though, everything's fine.I've tried several things.I've tried turning off the Windows Firewall to no avail (I have no other firewalls on my computer).I've checked to make sure that "Obtain an IP address automatically" and "Obtain DNS server address automatically" are checked, which they are.I ran ipconfig /release and ipconfig /renew only to receive the following error:"An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out."I'm running Windows 7 behind a Linksys WRT54G router.My line is (I think) fiber-optic, since there's no modem anywhere in the house, just a small beige termination box.I've posted dumps of ipconfig /all with and without the router. What do I need to do to get online without the router? [code]
Everything was fine up to today i cant play any online games such as league of legends or bloodline champions and even spiral knights wont work. Aswell my teamspeak wont connect but my webpages all seem to load and ventrillo works.Ive made sure my ports are fowarded and my firewall was disabled to try ive tried to reboot my pc but still nothing i run a dlink wbr-1310 and a M15 Alienware laptop.But my router has possed problems before because people cant connect to my minecraft server and rift patcher wont work.
I need to have some (maybe four) virtual network interfaces, one face of them connected to my laptop and another face bridged to one of my physical network interfaces.How can i do that?Ive tried VirtNet and Microsoft Loopback Adapter but no success.
I just updated my router to a Belkin n600 hd dual band n router. anyway i set it up one band for the "family" on 2.4 gig and my gamer on 5 gig. But the problem is none of my desktops and my latptop doesn't see the 5gig at all the only thing that picks it up is my ipad.