Belkin Routers :: F5D9230-4 - VPN Connection Drops Repeatedly
Dec 4, 2012
I have wireless router F5D9230-4. I use this every day to connect to my employer's corporate network from my home, using a VPN connection via Cisco AnyConnect Mobility Client.
Just about every day my VPN connection is interrupted and, although it "thinks" it is connected, it loses connectivity to my company's corporate resources. This occurs even though I'm connected to my router using a Cat5 cable. While this VPN connection is lost, my Internet connection keeps working.
When I use the same computer, even wireless, connected through other networks outside of my home, the VPN connection is never lost (or at least never that I remember).
When I wire my computer directly to my cable modem, this problem does not occur and my VPN connection stays connected throughout the day.
Note that I reset my wireless router to all default settings other than the password to access its management utility, to avoid any "weird settings" coming into play.
I wonder if this has to do with "VPN Passthrough" or the windows 7 firewall conflicting with my router's firewall?
I've been working with the IT department at my job for weeks on this and a resolution doesn't seem to be coming from that direction. I'm on calls every day that use this VPN connection and it's to the point where these VPN connection losses are embarrassing to me.
View 12 Replies
ADVERTISEMENT
Feb 5, 2012
This new router has the latest firmware and is within range of my Mac laptop.It drops signal for 30-60 seconds several times per hour.
View 2 Replies
View Related
Apr 26, 2013
(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies
View Related
Mar 27, 2013
it wants me to download something for a bin file, is it safe?
View 1 Replies
View Related
Jun 11, 2013
I just got a new Thompson Cable Modem from MediaCom. The old Surfboard gave out. However, my Belkin F5D9230-4 will not retrieve a new IP address. When I hook my laptop to the cable modem, I do get an IP and I can surf the web. The Belkin admin page says Disconnected. I've got latest firmware. I've reset to factory standards. What else can I do to get my Belkin working again?
View 1 Replies
View Related
Oct 13, 2012
I'm attempting to connect a 2nd wifi router to my belkin f5d9230-4.
View 1 Replies
View Related
Feb 3, 2012
I have a D-Link WBR-1310 modem and for some reason the internet connection drops every 4-5 minutes and then comes back after 30 seconds.I don't know what the problem is. I tried resetting the modem which didn't work. I tried upgrading the firmware from D-Link's website but it says "The version of setting file is not compatible." for the .bin file.
View 5 Replies
View Related
Mar 17, 2013
Where do I find the firmware upgrade for version one (1) of my F5D9230-4 Wireless G Plus Mimo router?
Only versions two (2) through five (5) are listed on the F5D9230-4 firmware page: [URL]
View 6 Replies
View Related
Dec 14, 2012
I believe we accidentally changed the NAT on our wireless g MIMO F5D9230-4 router. Now only one laptop is actually connecting to the Internet, but it looks like our network isn't secure anymore. Our 2nd laptop is connected wirelessly to the router, but not the Internet. Our iPhones and iPad are not connecting at all.
View 1 Replies
View Related
Dec 29, 2012
I have recently purchased a Belkin n300 wireless N router. The problem is, I have to reboot the thing numerous times throughout the day to allow a client to connect to it via wireless. One client will be connected and then drop, or a client will be connected, and I cannot connect another device. I also had an issue with streaming over wireless for netflix on my devices and the only way I could get it to work was to turn off the firewall, what the hek.... This is crap. I knew I should not have bought a belkin router again. Had one years ago and it constantly gave me issues. Had my Linksys Wrt54G for years with no problems until it finally crapped out. Anyways, my firmware version is the latest version according o the website.
View 6 Replies
View Related
Aug 28, 2011
Recently (for the last 2-3 weeks) my internet connection has been dropping. However my roommates does not. I'm afraid this may be more of a computer issue then a network issue, but I feel that you all know much more than I. [code]
View 2 Replies
View Related
Oct 9, 2010
I have a WRT310N V2 wireless router, with a WMP600N dual-band PCI card in my computer, using Vista 64x. I have had the same set-up for the past year or so, even after moving to a new apt, which I have been in now for 3 months. It has worked perfectly, up till recently. Over the past week however, my router has been dropping the connection, to the point of having to wait for it to show back up in my connections list. I made no changes to my setup, prior to the problems. I am kind of doubting it's my wireless card, as I can still see other routers. I have tried changing the MTU size, the Threshold, made sure the firmware was up to date, etc. I re-installed the drivers for my NIC and even changed ports, just to be on the safe side. I don't know what else to do, except go out and get another router. I have to use wireless, as I have nowhere to run cables at. I had this problem before with a Linksys wireless router, but figured it was due to the extreme amount of bandwidth my game uses online. Ironically, both routers are doing the same thing. They hit lag every 60 seconds almost on the money. I'm a gamer, so this is a huge inconvenience for me.
View 5 Replies
View Related
Jan 23, 2013
Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631_V1_130108
ISP : iinet
I have set up this modem correctly as it will occasionally sync and internet will be connected for a short time 5-10 seconds then loses sync.Have asked ISP to check line and they say it is fine. I have upgraded to current firmware but same result.I purchased for wireless N and print server features.Have reverted back to 4+ year old Netgear DG834GV which works perfectly with same cabling, filter etc. ISP suggest connect VG3631 on ADSL 1 but if I need to do that I may as well take it back and buy a cheaper wireless AP.I also set my existing Netgear as modem only and connected to EWAN port of VG3631 and it did the same thing (kept dropping connection), this suggests that it is a VG3631 hardware or software problem (completely separate to DSL/Line issues).
View 2 Replies
View Related
Oct 7, 2011
I have 2 wireless routers. Belkin Wireless G plus mimo Model# F5D9230-4 Ver.3001 and a D-link Dir-615 ver.B2. I am using the Belkin router has my main router. The wife’s laptop and the Wii console connect to the router wirelessly. I also connect a few PC directly to the router via Cat5 cables which runs through most rooms in the house. Since the router is down in the basement in my control panel along side the cable modem and what not. This causes the wireless single to be pretty weak in certain parts of the house. What I was planning on doing is taking the D-link router connecting it to the wall jack upstairs to the internet port on the router. Then setting both routers to static and changing the Belkin router to DHCP?
View 3 Replies
View Related
Jan 18, 2011
Every few minutes my WGR614v6 loses connection to the cable modem though the wireless in-house is strong. Cable modem being reset does not work. Resetting netgear router brings us back online but only for a few minutes. Have replaced power supply to router and it is still occurring.We have a desktop and 2 laptops online. Also, the notebooks always drop to 18mbps while the desktop stays at 54mbps.
View 2 Replies
View Related
Apr 16, 2012
My computer has developed a habit of spontaneously having no internet connection even though it says the signal is as strong as it can be. When I began to investigate the issue I ran some diagnostics and the Internet IP ping test failed. I have no idea what that means or how to fix it. I did do a ipconfig/all on a c prompt and have the results I can post if anybody wants to see that. Beyond this I can't lend much more except to say that when it happens I can click on the troubleshooting and while it is trying to determine what the problem is (usually takes at most 30 seconds) the issue resolves itself and I can resume doing what I was doing. Last night was the worst it ever has been I had to restart my computer completely but once it had gone through the boot process and was in Windows again it was fine.
View 20 Replies
View Related
Mar 18, 2011
I am having problems with my wireless internet. I am using windows 7 64-bit OS and am connected to a WRG614v6 Netgear router. I will be on the internet and will have superb connection then my connection will drop, when i view the network it says that i have lost IPv4 connectivity. Pulling the power to my router then powering it on again fixes the problem for a hour or two but then connection is lost again.Here is the readout when connection is stable
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersKyle>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kyles-Laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
View 19 Replies
View Related
Jul 12, 2011
I installed the RV220W Router in my office about 2 weeks ago and everything works perfectly for 3-4 days but then my connection drops out and the router must be restarted to restore connectivity. When I say the connection drops basically the internet connection drops out and my network connections drop shortly thereafter. Usually the wireless connections lose connectivity followed within a few minutes by the wired connections.
Is there something in my firewall settings that could cause this issue? I have checked with my ISP to verify there are no problems on their end.
View 12 Replies
View Related
Apr 14, 2011
I'm on firmware 1.0.0.26 and I'm seeing frequent drops in the WAN connection. Most network clients don't notice the drop because it reconnects, but the X11 windows server running over a VPN drops the session and I have to re-establish it. Also, at the same time I experience a 15-20 second silence gap on my VoIP phone connected to vonage (not over VPN). Never happened on my Linksys router, but it happens many times a day on the rv220w. When the drop happens I get the errors listed below in the router log:
Fri Apr 15 09:53:21 2011(EDT) [rv220w][System][PLATFORM] platformHandleDBUpdate:dot11STA op=18 row=1Fri Apr 15 09:53:21 2011(EDT) [rv220w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 1 failed. status=-1Fri Apr 15 09:53:21 2011(EDT) [rv220w][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=1Fri Apr 15 09:53:23 2011(EDT) [rv220w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OKFri Apr 15 09:53:23 2011(EDT) [rv220w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OKFri Apr 15 09:53:34 2011(EDT) [rv220w][System][PLATFORM] platformHandleDBUpdate:dot11STA op=9 row=1Fri Apr 15 09:53:35 2011(EDT) [rv220w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 9 dot11STA 1 failed. status=-1Fri Apr 15 09:53:35 2011(EDT) [rv220w][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=1
View 12 Replies
View Related
Aug 24, 2011
Lately (after upgrading to 1.0.2.1 and 1.0.2.4) I have been seeing these particular errors in my syslog server:
10.0.0.1 01/02/11 17:54:47 08/24/11 12:54:58 kernel Warning rv220w "KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK"
10.0.0.1 01/02/11 17:54:47 08/24/11 12:54:58 kernel Warning rv220w "KERNEL [Kernel]
[Code].....
View 11 Replies
View Related
Aug 7, 2011
Recently i bought a Cisco RVS4000, upgraded the firmware to latest stable release (Firmware Version: V2.0.2.7) and started configuring it.Yesterday i found out that as the dsl connection drops (i'm using PPPoE with an ethernet ADSL Modem) the product stops logging, both locally and to an external configured syslog (which resides on a linux box over the LAN).
View 3 Replies
View Related
Nov 26, 2012
how can i solve this error:
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:45 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
[code]....
i have a wireless device and every 1 hours the connection drops and i must reboot the device
View 8 Replies
View Related
Oct 18, 2011
For eight months we have not had any problems with our new WRVS4400N (V2.0.2.1) connected to a Verizon/Westell 6500 to provide DSL internet for our network with DHCP on our server... No changes have been made to the router or modem since initial setup; but, then it started -- Our internet connection would drop intermittently. Sometimes every 5 or 10 minutes - sometimes every hour. Verizon has tested the lines which came up ok, then they sent a tech who changed the wire pair coming into the building for the DSL line and retested the lines which again came up ok, then they provided us with a new modem (now a Verizon/Westell 7500). After all that, the DSL still connects then disconnects intermittently. I am now wondering if the issue lies with the WRVS4400N.
View 2 Replies
View Related
Dec 11, 2012
How do I configure my router to work with a dsl modem router model number is f7d7302
View 2 Replies
View Related
Oct 16, 2012
Using a wireless connection, my PS3 struggles to hold the connection. It either times out trying to sign on to PSN or EA sports, or connects only to lose the connection shortly thereafter. My router is the AC1000 and I'm wondering if there is a specific setting that is required in the setup that I'm not aware of. My connections to all other devices are solid.
View 2 Replies
View Related
Nov 24, 2012
I reset the f5d9321 router and no connection with modem, power cycled the modem and router and still no connection with the modem. Pc and laptop can connect to internet by connecting to modem. The router worked fine 3 days earlier.
View 1 Replies
View Related
Feb 10, 2013
Belkin N300 - bought two weeks ago and have had very slow internet connection since.
View 1 Replies
View Related
May 31, 2013
I have a belkin N750 DB router. I recently upgraded by internet service from 15Mbp to 30Mbp. If I connect my computer directly to the cable modem, I get 30Mbp throughput. However, if I connect the modem to the router my speed drops to 15Mbp. How do I get the router to support 30Mbp?
View 2 Replies
View Related
Mar 12, 2013
Why does my F5D5230 Router restrict my network connection speed ? I have a 30 mb connection to my cable modem when connected to my computer,but when I install the router my connection speed drops to 5mb.
View 1 Replies
View Related
Jan 16, 2013
F9K1103 v1 (01C) keeps loosing internet connection, the router is wired to a time warner modem and wireless is not enabled.
View 2 Replies
View Related
Nov 21, 2012
My Router has been gone from running at bout 7Mb download speed to 500Kb download speed. When the router is restarted using the menu software it will run quicker, but only for 20-30 second then back to a slow speed. It was off while we were on holiday in August and has not been any good since. Its a shame as it only 2 years old.
View 2 Replies
View Related
Feb 13, 2013
Having an issue with my Belkin N600 router - when initially installed it was working fine but in the past week it has gtten slower - if I connect directly to my DSL modem my speed is 1.5 MBS when I use the router connection my speed drops to .1 MBS - tried resetting to factory defaults & that did not work also tried resetting my modem *& router still having the same issue.
View 9 Replies
View Related
Nov 20, 2012
My N150 wireless router sees 25mb+ speed from my internet connection but my wireless connects at 1mb. Why is the WiFi being resricted?
View 2 Replies
View Related