Belkin Routers :: F9K1102 V3 Access Point IP Error

Mar 23, 2013

When I set up the Belkin F9K1102 as an access point I can no longer access it via the ip-address and it does not accept the new ip-address I've given it, but takes the ip-address 192.168.2.254, while my network is on the 192.168.1.XXX address series. The only way I can do this is by manually given the router a new address, then manually turn of the DHCP- server and finally move the internet cable from the WAN port to one of the LAN ports - but then the LED-indicator on the router is blinkin red.

View 2 Replies


ADVERTISEMENT

Belkin Routers :: F9K1102 V1 Guest Access While In Access Point Mode

Jan 17, 2013

I have an n600 ( F9K1102 v1 , firmware 1.00.09 ). My ISP provides my main router for my network, but I want to use the N600 as an access point, I have activated the "Use as Access Point" feature.Is it possible to still utilize the Guest Access feature in this case?

View 1 Replies View Related

Belkin Routers :: Firmware For F9K1102 V1 N600?

Mar 1, 2013

I'm a bit confused about Belkin's firmware upgrading. I lookup the firmware for my router N600 (F9K1102v1) and see that I've got options for v1, v2, and v3. Is it possible to upgrade my router to the v3 firmware? I'm guessing that I can't because its a v1 router, but just thought I'd ask just in case I can. Don't want to brick the thing.

View 2 Replies View Related

Belkin Routers :: Is F9k1102 V3000 Windows 8 Compatible?

Jan 16, 2013

I just bought this router for my new windows 8 desk top computer. I will be connecting it to the computer via ethernet. The box does not say that this is windows 8 compatible. Will this work with my new computer?

View 2 Replies View Related

Belkin Routers :: How To Bridge N600 DB Wireless Dual-Band Router F9K1102

Dec 31, 2012

Is there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?

View 1 Replies View Related

Belkin Routers :: N600 - Unable To Access Dashboard In Access Point Mode?

Mar 6, 2013

Setup N600 DB as an access point using the most recent firmware,3.03.12? Once I do I'm not able to access the dashboard even through I enabled the remote management option.

View 2 Replies View Related

Belkin Routers :: N750 - Access Point Support Of Guest Access

Jan 9, 2013

Does the N750 (F9K1103V1) support Guest Access while in Access Point mode? It will not provide an IP address when a guest attempts to connect.

View 20 Replies View Related

Belkin Routers :: Using F5D7230-4 As Access Point?

Dec 20, 2012

Can I use my F5D7230-4 as an access point? I need to provide a hardwired ethernet connection to my A/V reciever but not have a wired port in the area of my house. I have an existing wireless router thru Century Link. Could I have the Belkin attach itself to the wireless network and then have a cat 5 come out of one of the four ports to connect my A/V reciever to the network?

View 1 Replies View Related

Belkin Routers :: 403 Error When Access Facebook With N150

Nov 17, 2012

This problem started happening a few days ago. Whenever I try to access [URL] on my computer that's not physically connected to the router and modem, I keep getting a 403 error:

You don't have permission to access / on this server.

Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Apache/2.2.22 (Unix) mod_ssl/2.2.22 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 Server at www.facebook.com Port 80 --

but I can access touch.facebook.com and m.facebook.com. If I use the computer that is physically connected to the router and modem, I can access Facebook fine. I've tried using CMDPrompt and releasing/renewing IP to no avail. I use the belkin n150 router with updated firmware and the linksys wireless-g pci adapter with v3 drivers. Never had an issue before up until now.

View 1 Replies View Related

Belkin Routers :: 5FD8235-4 V2 - Access Point Setup

Feb 2, 2013

If I want to setup my N+ router 5FD8235-4 V 2 as an access point. How do I go about doing that?

View 5 Replies View Related

Belkin Routers :: N600 - Access Point Addition

Dec 28, 2012

I have a Belkin Play N600 as my primary and have an older Belkin G+MiMO that I'd like to connect as an access point only. Any step by step instructions of how to accomplish this?

View 1 Replies View Related

Belkin Routers :: Configuring An Older 5FD8230-4 As Access Point?

Dec 16, 2012

I am trying to configure an older Belkin Router (Model Number 5FD8230-4) as an Access Point so that I can boost the range of my network. The problem I have is in configuring the old router. It won't allow me to change any settings, or at least the changes don't stick, even after clicking "apply changes". I tried creating an administrative password but I am not even sure that this is working. I am using a Macbook, so perhaps this is an Apple compatibility issue. I have tried resetting the router and reverting to Factory default settings, but no joy.

View 3 Replies View Related

Belkin Routers :: Setting Up Max N300 As Access Point With USB Drive

Dec 17, 2012

I wanted to set Belkin Share Max n300 as an access point. I followed the instructions, set the IP address to the suggested one and connected it to the main router. It worked, computer connected to the Belkin via wire was getting IP address from DHCP on main router. But: The Belkin device itself became invisible. I lost connection to Belkin device via config page via HTTP. It does not respond to any IP address so I actually cannot use it for purpose I wanted to set up secondary Wi-fi, I just cannot configure it. Also I wanted to use USB ports of the Belkin to connect external drives. I cannot do it as well. More over it does not go back. It does not reset to the original router option.

View 2 Replies View Related

Belkin Routers :: Configure N300 As Access Point - Unidentified Network?

Nov 9, 2012

As per settings menu, I tried to give it an IP address but the new address is not accessible for further configuration. When I connected to the router it status changes to "unidentified network".

My primary network address range is 192.168.1.1 to 192.168.1.10. So I gave address to belkin as 192.168.1.100. But I can not access this address from both primary and belkin network.

View 2 Replies View Related

Belkin Routers :: N300 Wireless Bridges Be Connected To Same Access Point

Nov 21, 2012

Can 2 N300 wireless bridges be connected to the same wireless access point ?

View 1 Replies View Related

Belkin Routers :: N600DB Using Router As Access Point / Range Extender

May 16, 2013

I have a N600DB configured as a primary router. I got another playmax n600HD router which I want to configure as an access point that extends my network upstairs and allows me to attach some wired devices like my ps3. I followed the basic principles of setting as access point and my locally connected ps3 and NAS are communicating but no Internet access. How the 2nd router can connect to the internet?

View 2 Replies View Related

Belkin Routers :: Using Windows 8 And Getting Error 0x80040742?

Feb 25, 2013

I'm using Windows 8 and getting error 0x80040742

View 1 Replies View Related

Set Up An Access Point On Belkin N600?

Jun 27, 2011

I recently purchased a new Belkin Play Max N600 HD, much different to my old Billion 5100. I'm only on an ADSL connection but will be upgrading to ADSL2 soon.

Anyway I have a Netgear WG602 v3 Wireless Access Point, and I was wondering am I able to put this somewhere else in the house and have it relay the internet connection to my devices (iPhone for example).

I'm in the User Interface of my Belkin Device but I have no clue how to actually set up this Netgear device to act as an AP. I've changed one thing on the Belkin device, not sure if it'll make any difference. I changed the Wireless Band from 2.4Ghz to 5Ghz hoping that it'll strengthen the signal. I've attached a print screen of how the User Interface looks like in case any of the knowing would need some guide to where things are placed. =/

EDIT: Also whenever I'm downloading it's a bit slow. I don't have the fastest internet only 1.5Mbps (150kb/s) but now I'm downloading at about 50kb, and from my computer at about 70kb. =/ These are at separate times.

View 8 Replies View Related

Belkin Router As Access Point

Sep 17, 2012

I am using a Verizon Fios system at home. I have a desktop pc on the other side of the house from my modem that does not have wireless capabilities. I read that I can use an access point to connect it to my wireless network. I'm not sure if this is true or not. I set up my Belkin N150 basic router as directed to make it an access point. I connected it to my desktop pc on the other side of the house and it does not work. 1. Can this set up work? 2. If so, what do I need to do to get connected? Currently the pc is not even recognizing the router/access pt.

View 7 Replies View Related

Routers / Switches :: Belkin Router Installation CD Unknown Error 5?

Oct 3, 2011

I have a dell Win XP need to connect to Belkin router

View 1 Replies View Related

Belkin N750 - Find IP Of Access Point?

Jun 28, 2013

I have a home network, using Belkin N750 as main router and wired ASUS RT-N12C1 which was set as AP mode. How can I find the IP of ASUS RT-N12C1 to change channel?

View 4 Replies View Related

Belkin Routers :: N750DB Streamline Error When Running Speed Test

Dec 23, 2012

I keep getting "Speed Test: Error occurred during test." message when I run Streamline speed test on N750DB router. I'm not sure what my download and upload speeds are which is why I went with run a speed test to begin with.

View 17 Replies View Related

F5D7231-4 - Setting Up A Belkin Router As An Access Point

Aug 3, 2011

I have a Belkin High-Speed Mode Wireless G Router F5D7231-4 and I wish to use it as an access point for my main desktop for my wireless network.

I have followed methods supplied by both Belkin and users and have had no success.

Instructions followed:

- Connect a computer to Belkin router using an ethernet cable.

- Reset the router to factory defaults. The reset button can be found at the botton of it. The reset procedure is given below

- Make sure the router is switched ON.

- Locate the reset button(inside a hole) at the back of the router.

- Use a paper clip, push the reset button and hold it for 30 seconds then release the reset button.

- Unplug the Power cable from back of the router and plug it back again and wait for another 30 seconds.

- Log on to router setup page by typing 192.168.2.1 in the address bar of the browser.

- On the left under wireless click on the option Use as Access Point.

- Select Enable and specify the IP address as 192.168.2.254 and subnet mask as 255.255.255.0 and click on apply changes.

Every time the system crashes whilst applying the changes.

View 4 Replies View Related

Belkin F5D7132 Range Extender / Access Point

Jan 16, 2013

I have a Belkin F5D7132 Range extender/access point set up as a repeater for my wireless router as its range isn't adequate but this doesn't provide enough wifi signal strength. Can I set my Belkin device as an access point connected by Ethernet to the router?

View 1 Replies View Related

Belkin Routers :: N150 Firmware Upgrade Giving File Format Error

Mar 19, 2013

I bought belkin N150 recently. I tried to configure with my ISP. They are surprised how I don't have DHCP option in the wifi configuration and asked me to upgrade my firmware. When I tried to upgrade. I downloaded the firmware from [URL] tried to upgrade. It is showing file format error.

View 2 Replies View Related

Set Up A Belkin F5d7230-4 6000 Router As A Wifi Access Point

Oct 28, 2012

how to set up a Belkin F5D7230-4 6000 router as a wifi access point. My home set up is the following: Dell Desktop connected by Lan to a Telefonica/Movistar router (I live in Spain), Dell portable .. connected by wifi at the other end of the house ..saying it's portable is a bit of a joke .. it's old and moving it is not an option ! Problem is I don't get much wifi signal on the portable to be able to do anything at all online so after googling on how to increase wifi signal .. worked out that I could set up an access point.. and owning a belkin router have been trying to set it up although I think there is something

I've connected the belkin by cable to the portable and disabled the DCHP and clicked on set up as an access point, set up wifi security and password, but when i am trying to reset the IP address I end up having to reset the router and start all over again.

View 9 Replies View Related

Can't Get Belkin N600db To Detect F5d9231 (access Point Mode)

Oct 11, 2011

I assigned the access point a static IP 192.168.2.50 within the router IP range. My computer wireless card is detecting the access point but I can't get the belkin n600db to detect the access point.

View 12 Replies View Related

Linksys Access Point :: WAP54G Can't Connect To Cisco E1000 - Error 22?

Mar 3, 2011

For two years I had a 2-Wire home portal from AT&T for my DSL line.  I also have DirecTV with a DVR that has an ethernet port to download video on demand from the internet.  I bought a Linksys WAP54G to use as a pass-thru to the DVR and it has worked perfectly for the entire time.  I remember that the setup was a nightmare, so I saved the settings in case I lost them.
 
when I connected the new E1000 router to a Netopia DSL modem, I decided to reconfigure the WAP to use the new router.  I recovered the configuration file and the only thing that I had to change was the MAC address for the new router which I used with the Linksys' web-based setup tool.  I used the network discovery and selected the new router. All of the settings including the router name, default gateway, and static address for the WAP54G were the same.But, when I go to the setup page for the DirecTV DVR and perform a network test, I get an OK connect to the local network, but an error22 and fail to connect to the Internet.  Of course, going to the help page on the DVR for that error only gives the lame troubleshooting such as, is the router plugged in? Is the ethernet cable connected? etc.
 
I know that when I had to set it up with the original 2-wire portal, I had a lot of tweaking to do in the advanced wireless settings.  I'm trying to setup using the WAP54G as a pass-thru bridge for DirecTV. 

View 1 Replies View Related

Use A Netgear Wireless Card To Access Belkin Wireless Access Point?

Dec 23, 2012

have netgear pcmcia card need to connect to new belkin wireless access point.

View 1 Replies View Related

Linksys Access Point :: E4200 / E1500 - Cascading Routers Versus Access Points?

Nov 24, 2011

I am trying to find an effective way to extend the wireless signal across our home. I have tried various different solutions. Currently, I have an e4200 primary router that is cascaded with two additional e1500 routers that have been configured as access points. The Linksys support team hosted my computer and configured the devices. The e1500 routers are connected via ethernet wires running through the walls. And, this seems to be working well. Here's my question. The e1500 routers are configured with different SSID names, which Linksys advised was required to avoid conflicts in communications from the three router devices. Is there any way to configure this set up or something similar so that the entire wireless network has the same SSID and is seamless. In the current configuration, I have to specifically connect to the primary router or one of the two access points.

View 3 Replies View Related

Cisco Wireless :: 3502p - Access Point Support MESH And Point-to-Point Bridging?

Apr 16, 2013

I need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging?

View 6 Replies View Related

Cisco Wireless :: Point To Point Access Point 1262 Bridging

Feb 27, 2013

How would I bridge a wireless connection with a distance of 400 feet? Would twoAP1262N-A-K9 be able to make this happen? Or is there another wireless bridge that you all can think of?I would be connecting one AP1262 of off a 3750g switch and at the far end (400 ft aproximately) another AP1262N-A-K9.

View 12 Replies View Related

Belkin G Wireless CC7A57 - Can't Access Routers Settings

Jul 23, 2011

Earlier today I put in a password for my Belkin_G_Wireless_CC7A57 router. I had to change something, im not sure what it was. it was like WPA or WAP. now it wont let me go to my router settings 192.168.2.1 in the address bar is how i have been getting to it. now it just takes me to a OOPS google chrome cannot open this web page..... I just want to restore the router to it factory default settings. it will let this laptop on and another one in the house but not an older one we have which runs Windows XP. If i can get to my router settings i will be fine..

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved