Broadband :: Unable To Goto Or Ping Google

May 12, 2011

unable to access or ping google.com on WinXP - have two computer side by side. only having the problem on one of them. Have replaced the network card, did have malware but cleaned it up with malwarebytes.

View 1 Replies


ADVERTISEMENT

Why Does Router Ping Google Faster Than A Device On Network

Aug 6, 2012

When I ping google from my computer I get 0% packet loss and average ping time is 35ms. But when I ping any device on my network the time is 147ms and 25% loss. Shouldn't it ping my devices faster?

View 3 Replies View Related

Cisco :: WireShark Ping Response From Google Exists

Dec 5, 2011

A network administrator wants to capture some network data. He opens Wireshark software, start capturing, and does the following:In PC-A, runs a command in command prompt. The network admin issues the command and sees there is ping response from the google.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - Internet Access / Computers Cannot Ping Google

Nov 17, 2012

I have a WRT54G that has worked fine for years, with some PCs hooked up with Ethernet and various other devices connected wirelessly. I came home this afternoon and nothing going through the router could connect to the internet. I've made no changes to anything recently. 

I did troubleshooting with Comcast, and we determined that when their modem was hooked up directly to my computer then that computer could connect to the net. Problem solved as far as they are concerned--my router is busted. But I can still connect to the router, and enter its admin screen, and everything looks fine there. The computers on the router can all see each other. So the router is working. 

Once I hooked it back up to the modem my computers all lost their internet, but the router does get an IP successfully from Comcast. And it even assigns IPs to my computers that are hooked up to it. It's just that for some reason they still cannot get past the router.I used the ping function in the router admin site and the router pinged Google no problem. My PCs can ping the router without difficulty. But the computers cannot ping Google. 

I've tried every combination of power cycles and reboots you can name. I've tried duplicating the MAC address of the PC that connected to the internet onto my router. None of it has made any difference.

View 5 Replies View Related

Windows 7 - Unable To Browse To Google Websites?

Oct 24, 2011

Computer is Win 7, SP1 fully updated.I can browse to most other web site, but cannot go to Google or YouTube - Broadcast Yourself.

Tried a bunch of stuff like flushdns, winsock fix, clearing cache. Nothing works.Cannot ping to Google either.Gives in ip address but times out.Even when typing in the google ip that returns from the ping cmd it will not go to the web site.

View 2 Replies View Related

Cisco Switching/Routing :: 4.2.2 Unable To Ping 1 Internet Site From Edge Router Able To Ping

Jan 18, 2013

From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.

View 25 Replies View Related

Protocols / Routing :: Unable To Access Any Sites Except Google Sites

Jul 8, 2012

MY ISP installed one router in my lab.for internet connectivity they mail me steps :connect your Laptop directly to gi0/3 port to check internet connectivity with public ip 1.1.1.x and Gateway 1.1.1.1 with subnet mask 255.255.255.240 after connection I surprised because I am able to access only google sites like gmail,google search etc. but I am able to ping/traceroute all sites.from browser I am able to access only google sites only.In Router no firewall no such access list.

View 2 Replies View Related

How To Ping Second Broadband Router

Jul 26, 2012

I have three router belkin basic n150 and two router are connected to one router and gateware is first router 192.168.2.1 and also change ip address of two router 192.168.3.1,192.168.4.1 and internet is working but my problem is if i ping the two router ip address 192.168.3.1,192.168.4.1 is not pinging . How i ping the second router

View 1 Replies View Related

Broadband :: How To Change Ping Response

Apr 22, 2011

I want to change ping latency because my application cannot run in 1ms or 35ms it will work on 600ms to 1500ms due to in VSAT minimum response time latency is 600ms to 1500ms.for i want to change in my 2003 server reponse letancy time.and we are use online accounting software and connecting through ftp server.kindly do the need full how to change response time frame in windows

View 2 Replies View Related

Broadband :: No Internet Access - Cannot Ping DNS

Apr 17, 2011

I was able to go onto the internet with no problem. I've been searching forums trying to solve my problem but to no avail. I have Windows XP installed, I can connect to the LAN network but I cannot go online. I can ping the gateway but not the DNS as well as other address name or ip address. This is the output of ipconfig /all:

Description : Realtek RTL8139/810x Family Fast Ethernet NIC
Dhcp Enabled : Yes
Autoconfiguration enabled: Yes
IP address: 192.168.1.145
Subnet mask: 255.255.255.0
Default Gateway : 192.168.1.1
DHCP Server : 192.168.1.1
DNS Servers : 202.160.8.2
202.160.6.20P.s: All the other computers in the LAN can connect to the internet.

View 1 Replies View Related

Broadband :: Windows 7 Can Ping But Not Browse?

May 18, 2011

3 different browsers fail to see the internet. can ping all domains.

View 1 Replies View Related

Broadband :: Cannot Ping Or Tracert A Computer In A WAN

Apr 21, 2011

How can i enable this machine to be accessible throught PingTracert

View 1 Replies View Related

Broadband :: Receiving MAC Address Means Ping Test Success?

Apr 8, 2011

We are trying to isolate the fault. From Aggregator a router, we are receiving MAC address of distant end ethernet interface of a SDH box and vice versa is also possible. However ther is no packet received. My question is does ping test is must to see if the path is through or just receiving MAC adress at both ends would mean that packets have to go over the path.

View 1 Replies View Related

Broadband :: Unable To Sign In?

Jun 23, 2011

password problem no online soulution

View 1 Replies View Related

Broadband :: Unable To Connect To LAN?

Mar 13, 2011

My vista box is not connecting to internet. If I do a repair it appears to resolve the problem. However if I then attempt to pull up IE or Mozilla it takes a long time to load and eventually I lose the connection. Resulting in "cannot display webpage". I have scanned for virus and spyware and found very little spyware nothing malicous. Refusing to believe there was no virus I reformatted HD completly still having the same issue. Not sure what else I can do, I have searched for the most recent drivers. When check the status of my connection it shows that I am getting data packets sent and recieved. I cannot connect in safe mode either. I suppose it could be a bad NIC but I would think that if it was bad it wouldnt indicated that im connected and showing active data packets.

View 2 Replies View Related

Broadband :: Unable To Start Rpc

Mar 19, 2012

How do you enable Window XP RPC,Had W32Blaster.worm and cleaned system, however Internet will not load lack of RPC ,Message; no or low connectivity.

View 9 Replies View Related

Broadband :: Unable To Connect To The Internet?

May 3, 2012

However I cannot connect to the internet, the following message appears. The system cannot up date the telephone book file error 624. I am not connected to a telephone line for my system, as I use a modem USB, which is working ok.

View 1 Replies View Related

Broadband :: Unable To Connect To Internet?

Aug 15, 2011

diagnosis is indicating server is connected but internet is not connected

View 1 Replies View Related

Broadband :: Unable To Have An Icon Of Any PowerPoint Document?

Oct 29, 2012

I do not have an icon of any power-point document what do i do?

View 1 Replies View Related

Broadband :: Unable To Connect To Internet On Desktop

Jul 4, 2011

Ethernet driver or wireless undetected have a port to plug ethernet cord into on computer

View 1 Replies View Related

Broadband :: Unable To Transmit Emails To Friend

Mar 13, 2011

I am unable to transmit e-mails to a friend , using "docomo.ne.jp" as her provider, and get no assistance from mailer-daemon at this end.

View 3 Replies View Related

Broadband :: Unable To Find Driver For Gigaset 567?

May 23, 2012

need driver for gigaset567 have no driver cannot find

View 1 Replies View Related

Broadband :: Unable To Load Yahoo Msn Live Sites?

Dec 19, 2011

Loading yahoo page on windows 7.

View 1 Replies View Related

Broadband :: Unable To Connect To Internet After Removing Rogue Malware?

Dec 19, 2011

My computer was recently infected with the XP Antivirus 2012 rogue virus. I believe that it has been removed from my computer, but I am unable to connect to the internet. I am unable to obtain an IP address. The IP address is 00000 and the Submask is 0000. My operating system is Windows XP and I am using a High speed cable connection

View 5 Replies View Related

Broadband :: Message Says Windows Was Unable To Find A Certificate To Log In To Network?

Nov 5, 2011

My friend has just got a laptop and when she is at my place it shows that my computer is nearby but message says "Windows was unable to find a certificate to log in to network".

View 6 Replies View Related

Broadband :: Hotmail Is Temporary Blocked / Unable To Access Emails

Aug 29, 2011

My Hotmail is temporary blocked for more then two weeks all my work related email I cannot access it?

View 1 Replies View Related

Dell Xps L501x / Unable To Detect Device Mobile Broadband?

Jan 3, 2013

I have dell xps l501x with embedded 5620 mobile broadband mini card. Vz access manager says that device is disabled. How can I fix. Or in device bad and have to replace?

View 4 Replies View Related

Cisco :: Unable To Ping In Dos?

Mar 9, 2013

*I have 2 cisco routers 2811 router A&B*using 0/0 for WAN and 0/1 for LAN on both routers*both routers are connected together with crossover cable to 0/0. recieve link and activity*both routers are on the same subnet Router A:0/0 192.168.1.1/24 - router A:0/1 192.168.2.1/24 ; Router B:0/0 *192.16.1.2/24 router B:0/1 192.168.3.1/24*I can ping the inside and outside address of both router from PCs connected at its respectable end. *PC A 192.168.2.2/24 PC B 192.168.3.2/24 *when connected to router A 0/1 and I try to ping router B 0/0 it times out in DOS* but I AM (CAN) able to ping from PC A to router B 0/0 in hyperterminal, telnet and Cisco SDM. I just CANNOT ping in DOS?

View 10 Replies View Related

Unable To Ping Any System In LAN?

Mar 9, 2011

We have many CT/MRI etc. machines and Servers in the Hospital LAN. Now intermittently we are loosing the LAN connectivity i.e we are not able to ping any system from any node inside the hospital network for sometimes, after some time it will start working and then again it will stops again.We are using procurve switches and also we are not using any router

View 2 Replies View Related

Unable To Ping From One Another With OS XP And Windows 7

Sep 14, 2012

I m not able to ping from one to another with the os win XP n other with win 7.

View 1 Replies View Related

D-Link DIR-615 :: Unable To Ping It

Jul 29, 2011

I'm trying to do port forwarding on my DIR-615...first of all I need to be able to ping the router from outside! I did enable the ping options to allow request from WAN...still don't work!!I removed the router and plug my laptop directly on my cable modem adapter and I'm able to ping my IP address (did put the same address the router had)...so, the IP is OK and it is possible to get in the modem from outside.I did plug back the router, and still not working...I did some trick like enable all IP with the Inbound filter...give access to few MAC address that I have to give more chances to get in and still not working!!!

View 6 Replies View Related

Cisco :: Unable To Ping Over Ipsec VPN?

Mar 25, 2011

I have created a site to site Ipsec vpn with a cisco 2610 and a linksys RV042. Running a show "crypto isakmp sa" command I get a qm_idle status and when running a "show crypto ipsec sa" I see that packets are being decrypted and encrypted. Also when running the "show ip access-lists" command I do have matches to that connection.The problem is that I am unable to ping hosts from one network to another. For example, from the Cisco router in network 192.168.0.0 I am unable to ping the remote network 192.168.2.0 and vice versa.

I am not sure what is happening. Do I need to create a route to that remote network? I guess it could also be a problem with NAT or an ACL.Here is what running-config shows:

crypto isakmp policy 1
encr 3des
hash md5
authentication pre-share
group 2
lifetime 28800

View 5 Replies View Related

Cisco :: Unable To Ping From Static IP?

Oct 26, 2012

I am connecting a 2600 router to an ISP. Interface 0/0 is connected to the ISP using DHCP. Interface 0/1 is connected to the inside providing DHCP services to the inside. At least it should only be providing DHCP services to the inside. I also have a public static IP that is NAT to a private static IP. Everything is working except the computer on the static IP. From the router I am able to ping inside and out from each interface. I am able to ping both interfaces of the router from the computer on the static IP but I cannot ping outside the router. If I do a debug all I see a reject for the gateway of the static IP but it has “mobile IP” in the text string. Not sure what mobile IP is relating to. Networks are as follows:

0/0 DHCP 10.X.X.X
0/1 192x.x.x
Static 75.X.X.X

[Code].....

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved