Cisco :: 2100 / Two Network Connections And One Wireless Controller?

Jan 29, 2013

In the near future my company is looking into the option of adding a second network connection (exclusively for customers visiting our facility) to our pre existing WLAN network. We are currently using a Cisco 2100 series Wireless LAN Controller and probably 6-8 APs. Our main connection is made up of 4 T1 lines and the second connection will more than likely be a cheap DSL connection. I'm wondering if this technology supports two separate connections on one controller and APs. For example, is there a way within the controller web interface to separate what is currently our "Guest" connection from the main Internet line? I was thinking of just plugging from the DSL router directly to the controller and save the hassle of changing routing and VLANs.

View 12 Replies


ADVERTISEMENT

Cisco :: Setting Up Wireless LAN Controller 2100?

Feb 7, 2011

I am having trouble on setting up a WLC2100 ver 7. we need to implement a private and public network. private network authenticate to IAS - RADIUS (windows server 2003 server) while the public network is open but when a client connect to AP it will redirect to a 3rd party web athentication - HotSpot Server. the challenge is we want to broadcast a single SSID.
 
senario:

1. when a user/guest connect to the AP a radius server will authenticate thru IAS - Radius.

2. when a user is authenticate via radius a dhcp server will give an ip address of the private network.

3. if the user is not authenticate a dhcp server will give the public ip address and netowrk traffic must go to a different VLAN.
 
my question is, is it possible to broadcast a single SSID for the two network? is there a document which is related to our scenario?

View 2 Replies View Related

Cisco LAN :: 2100 - Browser Access To Wireless Controller?

Jul 29, 2012

I have a wireless controller 2100. I can't access it via browser, when I am connected to one of its physical ports. I use the same subnet ip address as that of the management interface of the wlc.

View 5 Replies View Related

Cisco :: Configuring Trunking And VLANs On A 2100 Series Wireless Controller?

Oct 4, 2011

We have 4 1142N LAPs that I want to divide between an internal wireless and a guest wireless network using the controller.  Currently all of the APs are on an established internal network, but I want to migrate one over to a test guest network before buying more LAPs to augment the networks further. Currently the port connecting to the WCS from the 3560 switch is configured as an access port using VLAN 10.  Whenever I make it a trunk port carrying VLAN 10 as well as the other ports we will be using for the guest and ap-manager networks, I lose connection with the controller.  To me this implies that the port on the controller is configured as an access port as well.  In the documentation I found for the controller it states that by default the ports are al configured to be trunks, but it appears as though something was changed by the previous tech.  All of the APs are connected to other switches, not to the controller itself.
 
1) How can I get the port on the controller back to being a trunk port

2) Can I use the internal DHCP server for the guest network if the subnet is different than the management subnet, or will I have to use another external server and relay/proxy it through the controller to give guest clients IP addresses?

View 2 Replies View Related

Cisco :: How To Chance Web Authentication Certificate On WLAN 2100 Controller

Feb 8, 2011

how to chance the web authentication certificte on WLAN 2100 controller. My users are complaining that they need to accept the security certificate before proceeding to the actual authentication?

View 4 Replies View Related

Cisco :: Test Fast Roaming Using A Cisco 2100 Series Controller And 2 1140 APs?

Jul 20, 2011

I'm trying to test fast roaming using a Cisco 2100 Series controller and 2 1140 APs. The initial authentication succeeds fine and the wireless connection works ok using WPA2+CCKM and LEAP with a Cisco ACS radius server.The problem is that the client does not attempt to preauthenticate with the other AP because the RSN Capabilities IE in the AP beacons and probe responses do not set the RSN Preauthentication capable bit. I can't figure out what it takes to get the APs to indicate to clients that it can do preauthentication. I'm been crawling through all the documentation I can find, to no avail.

View 1 Replies View Related

D-Link DCS Network Camera :: DCS-2100 - How To Change From Wired To Wireless

Feb 13, 2011

I'm trying to re-setup this EOL camera on a new router.I've been able to reset the cam to factory defaults and see it wired using dhcp.  I then was able to change the address to a static address, still wired and still can see it with IE.  However when I disconnect the rj-45 cable, power down and restart, I can't access the cam.

View 2 Replies View Related

Cisco Wireless :: Getting 3500 AP To Talk To WLC 2100

Jul 18, 2012

I am trying to config my wireless lan controller (WLC) 2106 to discover my new 3500 access points.I followed the example Cisco configuration doc.69719.I am using a Cisco 3760 switch to interconnect the AP and WLC.I set up DHCP in the switch. [code]

View 6 Replies View Related

Cisco Wireless :: WLC 2100 And LAP1131AG Are Disconnecting

Oct 10, 2010

Since few days the WLC 2100 series controller and 3x LAP1131AG are getting disconnected and the controller gets offline via the local ip address.  At that point I have to reboot. To get anywhere and after I connect wirelessly to the AP before I know it it disconnects.  It worked for 3 years straight no fuss. And now nothing. I reconfigured the WLC 10times and no diffference.  

[code]....

View 6 Replies View Related

Cisco Wireless :: To Join 1262 With Wlc 2100

Apr 1, 2012

I have a cisco AIR-LAP1262N-A-K9  and AIR-LAP1142N-A-K9, and i would like to join to Cisco WLC2106 (software version 7.0.98.0)My ap 1262N have 3 antennas externals with 7dbi of ganancy,Is possible to do it?

View 1 Replies View Related

Cisco Wireless :: LAP1142 Cannot Join WLC 2100

Apr 2, 2013

I'd WLC 2100 series and 9 access point LAP1142N .8 LAP1142N can work fine and join a capwap controller is ok but only one LAP1142  is can not . Part of LAP  is AIR-LAP1142N-A-K9
  
Apr  2 10:52:42.284: LWAPP_CLIENT_EVENT: spamResolveStaticGateway  - gateway found
*Apr  2 10:52:42.284: LWAPP_CLIENT_EVENT: spamResolveStaticGateway  - gateway found
*Apr  2 10:52:42.284: LWAPP_CLIENT_EVENT: Dropping discovery in LWAPP. This AP model is not supported by LWAPP WLC.
*Apr  2 10:52:42.284:  status of voice_diag_test from WLC is false
*Apr  2 10:52:52.284: %CAPWAP-3-ERRORLOG: Go join a capwap controller

[code]....

View 4 Replies View Related

Cisco Wireless :: Recommendations For Implementing A Second WLC 2100?

Jan 3, 2013

We have two 2100 WLC's that support 12 access points. One has been sitting in a box for some time, but we're at the point where we need to add additional access points that will put us in excess of the 12 limitation. What is the best way to go for installing the second WLC?

View 2 Replies View Related

Cisco Wireless :: WLC 2100 Series DHCP

Sep 1, 2011

I have a problem with our WLC 2100 series (2125). Basycally internal DHCP server configured on WLC is not working. I have one AP connected to port no 7 (PoE) to bypass and eliminate problem with other equipment.
 
Port no 7 details:
 
IP Address: 192.168.30.10
Netmask: 255.255.255.0
Default router: 192.168.30.1
DHCP Server: 192.168.1.250(code)

View 14 Replies View Related

Cisco Wireless :: WLC 2100 Configured To Control Two AP

May 17, 2012

I have a fairly simple WLC 2100 configured to control two APs. We had a power outage a few days ago, and though the WLC was on a surge protector, it did not come back up properly after the outage. The STATUS light sticks at amber and I can't get any console response. At this point I'm not sure what to do except replace the WLC, though I'm loathed to do that as our budget was just cut substantially for next year and we're trying to turn nickels into pennies.

View 4 Replies View Related

Cisco Wireless :: Internal Temperature WLC 2100?

Dec 17, 2009

The operating temperature for 2100 wireless lan controllers is up to a miximum of 40 degrees celsius according to the datasheet. We deployed some 2112 controllers all displaing a temperature above 50 degrees celsiun. This during normal operation and deployed proper enviromet (aroco ...)

View 2 Replies View Related

How To Switch On Wireless On Compaq 2100

Oct 10, 2012

How to switch on wireless on Compaq 2100

View 1 Replies View Related

Cisco Wireless :: WLC 2100 Per-user Bandwidth Contracts

Aug 16, 2011

One of our customers have one Cisco WLC 2100 (firmware 5.2) with 4 AP Mesh 1522, in a city deployment. In order to achieve local regulatory, has to implement bandwidth limitations per user.
 
I got screen captures of WLC QoS Profiles options, with Average Data Rate in Per-User Bandwidth Contracts. So my question is, do I need any other equipment to achieve per user bandwidth limitation? Can it be done with WLC QoS options?

View 3 Replies View Related

Cisco Wireless :: WLC 2100 Ipv6 Ready Connection

Apr 30, 2012

We have a 2100 cisco Wireless LAN Controller which manages 3 APs and  assign IP address to clients which connects via wifi.  Currently, we are  deploying dual stack IPv6 and our consultant stated that our current  controller does not support IPv6.
 
This is rather odd statement because there is an option to enable IPv6  in the advance tab of WLAN.  And sometimes clients (win7 and Mac OS X)  are getting v6 addresses, able to ping v6 sites, and reach v6 sites  successfully.   And other times, clients do not..or getting the v6  address for 10-15minutes, then unable to ping/reach v6 sites.
 
Our consultant is sticking by his words saying it does not support.   If  this is true, then clients should not be able to get v6 at all....not  sometimes and not other times; very inconsistent.
 
And what is ipv6 pass through? What is ipv6 bridging?

View 2 Replies View Related

Cisco Wireless :: 2100 / 1130 / 3550 - Couple Of APs Are Down

Feb 27, 2013

I have a couple of AP's that are down and won't let me change to up. When I try to enable admin status I get a pop up window: " error in enabling admin status". 
 
I have configured the WLC for power injectors with a 3550.

View 2 Replies View Related

No Wireless Connections To Nas In Network

Aug 22, 2011

I have a NAS connected to my network and all the computers/laptops can use it if connected via the ethernet (all use various operating systems, no static ip's). as soon as I try and use them on the wireless none of them will see the nas, they are all connected to the network and can use the internet, just no connection to the nas.My Router Ip is 192.168.1.1 and my nas IP is 192.168.1.254, I have tried setting the nas to automatically getting an ip from the router aswell but this still doesn't make any difference.

View 7 Replies View Related

Red X In Wireless In Network Connections?

Dec 5, 2011

I lost connection to the wireless.I cannot find any wireless networks, which is obviously incorrect. The switch is plugged in. I can plug a cat-5 in and run fine. I can connect to the wireless with other machines fine. Something is up with this computer. I use Virtual Boxes on here and see that there is a "Virtual Box Host Only Network" that I've never noticed.I've disabled this but my wireless is still not finding anything.

View 5 Replies View Related

Can't See Wireless Network Connections After OS Reinstall

Jul 4, 2011

i have a Dell Latitude D810. I just wiped and reinstalled the OS. i have updated everything from windows update including chipnet,.Net, flashed the bios, and did a scan, and updated drivers. i have tried to update drivers from the original CD.problem: I cannot seem to get the computer to realize it has an internal network card. there is no switch on laptop. i have tried manually updating drivers, performing scans, etc. when i go to Dell website, it says to go to network connections, and click on the Wireless Connection to set it up, but that option is not there (only LAN). i am on internet through LAN but cannot see anything wireless to set up.when i am finally able to see wireless options, i want to connect to my existing network, so i do not need to set up a new network.

View 8 Replies View Related

DLink WL-2100 - PC To Access Point To Wireless Modem

Apr 2, 2011

I have a D Link WL-2100 AP, I connected my PC to AP with ethernet cable, then I tried to connect the AP to my wireless modem but I couldn't do.How can I make the AP recognize wireless modem?

View 2 Replies View Related

Upgrade Or Add WPA To WEP On Intel(R) PRO / Wireless Lan 2100 3B Mini PCI Adapter

May 5, 2012

Can I upgrade or add WPA to WEP on Intel(R) PRO/Wireless Lan 2100 3B Mini PCI Adapter

View 1 Replies View Related

Cisco Wireless :: 2100 No Internal DHCP Over Another (Guest) SSID / Interface

Feb 24, 2013

I have a cisco wlan controller (2100) running software 7.0.235.0. I have the internal private wlan running off of port 1 and that is working fine with an internal dhcp server.Is it possible to setup another ssid (guest) and have the interface directly linked to a static ip on the WAN and also use the built in cisco internal dhcp server?

View 4 Replies View Related

Wireless :: What Is Network Controller And Its Function

Mar 24, 2011

i have internet srevice working with my wireless usb stick or ethernet wire from my gateway modum. in device maneger i have network adapters listed and a question mark before network controller. windows auto update lists no driver avalible for it, and i would like to know it function/purpose?

View 1 Replies View Related

N150 - Centrino Intel Pro Wireless Lan 2100 3a Won't Connect To Netgear

Apr 28, 2011

Dell 8600 centrino intel pro wireless lan 2100 won't connect to netgear n150 wnr1000. Running 802.11b band it sees wireless network but won't connect. I have 2 other computers connected to network so it works.... I don't know if Netgear n150 is compatible with 802.11b band...

View 1 Replies View Related

Wireless Network And Ethernet Connections Not Working?

Jul 28, 2012

My computer is a Dell Inspiron with Windows 7 Home Premium Service Pack 1. A few weeks ago, it stopped working and would not let me log in. I fixed that problem by launching Setup and downloading the Windows 7 installation from a jump drive. The new problem is that I cannot connect to the internet at all. My wireless connections will not show up and when I hook up my ethernet cord, it will not show up either.

View 10 Replies View Related

No Wireless Connection Listed In Network Connections

Mar 2, 2012

I recently had to reinstall Windows XP on my Panasonic Toughbook but when I did, I now don't have any way of getting a wireless internet connection. I don't see the wireless card in the hardware list and there's no wireless connection listed in the network connections. (This laptop came with Vista Business but I wanted XP since I'm more familiar with it.)

View 1 Replies View Related

Cisco Wireless :: 4404 Guest Anchor Controller With 5508 Foreign Controller?

Aug 12, 2012

I know that the 3600 series APs are not supported on the 4404 WLC.  However, would the following scenario be supported? I would like to use the 4404 (software rel. 7.0) as a guest anchor with a 5508 (software release 7.2) as the foreign controller supporting series 3600 APs.  I ask because the APs do not need to join the guest anchor.

View 7 Replies View Related

Cisco Wireless :: 5508 Foreign Controller And 4400 Anchor Controller?

Jun 2, 2013

We have a customer that have 2 5508 as primary and backup controller and a 4400 as an anchor controller.  We plan to upgrade the 5508 to 7.3.112.0 and the 4400 is already 7.0.116.0.  Will there be any issue if the anchor controller is not the same code as the foreign controller?  Do I also have to upgrade the acnhor controller to 7.0.240.0?

View 2 Replies View Related

Cisco Wireless :: 5500 / Controller Versus Cloud-based (Controller)

Mar 31, 2013

We are trying to navigate the waters in choosing between a in-house, controller-based, wireless network solution or a cloud-based solution. We have been presented with the usual suspects in cloud-based (Aerohive, Meracki, etc) and with Cisco (5500) and Aruba on the other side. We are a multi-campus organization with approx. 200 APs.Any hard reasons why go with a controller-based vs. cloud-based solution? If we must keep the conversation limited to Cisco, why go Meracki over Cisco's WLC solutions or vise versa?

View 1 Replies View Related

Cisco Switching/Routing :: 2125 Wireless Controller Without Anchor Controller Just Using Existing Hardware

Dec 6, 2012

I am looking to configure a wired and wireless guest network. I have industrial barcode scanners that connect to one SSID and then there is the business network on the office SSID (no vlan seperation for these devices just different SSIDs). There is not really a need to seperate the business network from the scanners in any case. However, there are needs for a guest network and this needs to be seperated. At the bare minumum I would like to have the wireless guest network. Here is what I have: 2125 Wireless LAN controller managing 18 LAPs (1 indoor and 17 outdoors)Cisco Cat 2950 switches (2 x 24 port and soon to be replaced with 2 x 48 port 2960's with 802.1x capability) Sonicwall TZ210 firewallOne existing wired and trunked vlan for PLC infrastructure. One ESXi hosting Windows server guests (soon to be 2 with vMotion) The reason for the wired guest access network is tp prevent anyone from plugging into the wall jack in the office with thier home laptops or anyone else from being on the same subnet as our domain machines. Granted they would be unathenticaed but there would be no layer 2 seperation and that is what I think would be best.
 
How would I go about doing this on the wireless controller without an anchor controller just using my existing hardware? I would like to have the Guest SSID only availible in the front office. Is it possible to offer a guest network while still servicing the business network SSID on the same access point? Then might I be able to have the guest network be treated as it should at the controller? However this might present another issue altogether as the guest traffic will be over the same wire as the business SSID until it hits the controller for management.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved