Cisco AAA/Identity/Nac :: ACS 5.1 Import Template Gives File Format Validation Failed

Sep 21, 2011

Network Resources - Network Devices and AAA Clients- File Operations - Add - gives me File Format Validation Faliled. I am carefull to leave the header as it is. The header in the Import Template looks faulty, see attached. When exporting devices I also get the same header as attached. I also tried to change the header so its all in one column, but with same result.

View 1 Replies


ADVERTISEMENT

Cisco AAA/Identity/Nac :: ACS 4.2 - Convert Dmp File To Another Format?

Jun 16, 2011

Is there a way where I can just export the clients from one server and restore them onto another?
 
Is tehre maybe a way to convert the dmp file to another format, like csv, then modifying it and converting back to dmp?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: %ASA-3-717009 / Certificate Validation Failed / Certificate Date Is Out-of-range

Jan 30, 2012

There is ASA with remote access VPN and users are authenticated using third party signed certificates (CA is not local in ASA).When user certificate expires i can see it in syslog messages. For example:
 
     %ASA-3-717009: Certificate validation failed. Certificate date is out-of-range, serial number: (...)
 
I would like to know if there is an opportunity to view user's certificate expiry date beforehand, say, 3 days before?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 License File Installation Failed

Sep 19, 2011

have a  ACS 5.2 version installed on Vmware . I  purchased below  liscense
 
Product Name                  : L-CSACS-5-LRG-LIC=
Product Description         : L-CSACS-5-LRG-LIC= : ACS 5 Large Deployment License (Electronic Delivery)
 
When i am trying to upgrade the liscense i am getting an Error " Liscense file installation failed : The liscense file must contain single base liscense "

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.2. Build15 - Replication Failed With Cannot Access File

Dec 22, 2009

Just upgraded from 4.0 - to 4.2 then to 4.2.1 15. As you may have seen with periovous posts of mine its not been an esay ride.I have now managed to get it all working - backups AAA etc but for some reason i cannot get the replication to work! Its states the following...
 
Within the Database Replication active log - Error OutBound database replication failed - refer to CSAuth log file.Other lines in the log state  its ok eg - Component logging reports was updated - being replicated to slave...

Please note that the $ is a symbol that i have used because the symbol in the log is strange and i  cannot seem to be able replicate here with this text, for example $etworks - should be networks.

View 4 Replies View Related

Cisco :: WLC 5508 / Guest User Session Validation Failed

May 31, 2012

I am running a guest wireless network on a Cisco 5508 WLC with 6.0.202.0 code. My syslog is filling up with the following error message:

WLC: *May 15 12:32:59.244: %AAA-3-VALIDATE_GUEST_SESSION_FAILED: file_db.c:3968 Guest user session validation failed for guest_user10. Index provided is out of range..
 
The user that is assigned to the guest_user10 account works fine and has no idea this error is occurring.
 
This error message is occuring exactly every 15 minutes 24x7.
 
I believe I have a rogue user who has setup a device to try and login to the guest network automatically, every 15 minutes with the guest_user10 credentials. I need to track this device down. I need a way to find either the MAC or IP address of the device that is causing this error message. I have tried turning on AAA debugging on the controller but I dont get anything more than the above error. I have also tried using WCS to look at the client history but it only show the normal activity.

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.x Identity Store Sequence And Token Validation

Dec 3, 2012

We have a ACS 4.3.2 installed with users authenticating against an Active Directory database. The AD database not only authenticate the users but also assigns the group that is used to select IP address pool.Now the requirements require to use token authentication with SafeNet. This authentication uses the same username but the password is composed of the original password + OTP.The problem is that the SafeNet server doesn't return the group membership.I've read about the Identity Store Sequence in ACS 5.x and I think I could use it in the following sequence:! configure an Authentication Sequence using the SafeNet token server (this works with ACS 4.x)I configure an Attribute Retrieval Sequence against the AD database. This would use the username only, no password and would retrieve the group membership.

View 1 Replies View Related

Cisco Switching/Routing :: GLC-T Error SFP Validation Failed On Nexus 5548

Oct 19, 2012

We inserted GLC-T modules and on Nexus 5548 they are showing SFP validation Failed  , as per Cisco doc GLC-T is support . Since we have 28 such modules and all after inserting showing same error. please see the below details. I also try configuring speed and inserting modules but no result ..let me know whether my GLC-T module is supported on Nexus 5548
 
INMUMFDS1SWCORE01# show module
Mod Ports  Module-Type                      Model                  Status
--- -----  -------------------------------- ---------------------- ------------
1    32     O2 32X10GE/Modular Supervisor    N5K-C5548P-SUP         active *
2    16     O2 16X10GE Ethernet Module       N55-M16P               ok
3    0      O2 Daughter Card with L3 ASIC    N55-D160L3             ok

[code]

View 6 Replies View Related

Cisco Wireless :: Error Message On WLC5508 - Validation Of STAT_PAYLOAD Failed

Oct 24, 2012

Upon checking the logs, I'm seeing a lot of these messages:

*emWeb: Oct 25 14:11:01.345: #LOG-3-Q_IND: spam_lrad.c:10136 Validation of STAT_PAYLOAD failed - AP  00:3a:98:09:4e:d0

Always the same MAC address, which I assume is a Cisco AP trying to join. The output interpreter/message decoder isn't much useful. 5508 Controller running ver 7.3.101.0.

View 11 Replies View Related

Cisco :: Import Certificate Failed For 7925

Jul 24, 2011

I'm currently in the process of the setting up  a new wireless network and I want to test out our 7925 phones on it.  When I try uploading the certificate to the phone it fails and I find the following error in the trace logs
 
[code]...
 
I created this certificate using using Windows Server 2003 and it is 2048 bits.  This certificate works fine with my laptop but I'm unable to upload it to the phone.  The app load currently on the phone is CP7925-MFG-D.8.LOADS.  Are there any specific guidelines out there when creating a certificate for a Cisco 7925 phone?

View 2 Replies View Related

Cisco :: SRX 210 NCS 1.2 Import Third Party MIB File

Feb 21, 2013

I would like to use the NCS 1.2 to monitor Juniper SRX 210 firewall. When I try to import the MIB File from NCS, which show "Error: Failed to load MIB File "mib-802" because it is not in the resource path.what I can upload the MIB File from Juniper. [code]

View 0 Replies View Related

Wireless :: Converting EXE File To SIS Format?

Jun 22, 2011

How can I convert exe file to sis format.

View 1 Replies View Related

Cisco :: 2960 / Import The Vlan.dat File To Flash?

Nov 28, 2012

I have copied the config and vlan.dat files via tftp to the computer and want to import them to a replacement switch. Both switches are 2960 model. I get the config over fine but not sure how to get the vlan.dat file to the flash.

View 1 Replies View Related

Cisco :: LMS3.2 Software Distribution File Format?

Aug 23, 2011

in RME->Software Management-> Software Distribution -> By Devices [advanced],  what is the file format we should have here, when we try to deploy many IOS images at once?

View 1 Replies View Related

Cisco AAA/Identity/Nac :: CRL Validation Fails On ACS 5.2.0.26.3

Aug 11, 2011

We are using ACS v5.2.0.26.3 in 802.1X certificate based authentication. Now, when we added CRL functionality into ACS it fails in CRL validation and gives following error message:
 
LastErrorMessage=CRL PKI verification failed
Certificate Revocation list [URL]
 
We have installed root, device and server certificates from CA, but for management we are still using self-signed certificate.
 
Question is, which certificate is used when validating downloaded CRL file - one used for EAP-TLS or one used for management interface?
 
How I can check which certificate ACS server is using for CRL validation?

View 19 Replies View Related

Cisco AAA/Identity/Nac :: Posture Validation On ACS 5.3?

Sep 9, 2012

it's possible to enable Posture validation on ACS 5.3. If so, could I have a link or a procedure for implementation ?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5 Certification Validation

Jul 2, 2012

I want ACS 5 to authenticate the wireless users validating each user with a certificate. The ACS is connected to the AD but, is it possible to do that using user/password from the certificate?, i need to do that with certificate and independant of the AD certificates of each user, so it will be scalable.

View 3 Replies View Related

D-Link DIR-655 :: Router Configuration File Format Difference Between Rev A And Rev B

Mar 31, 2011

I've owned the Rev A DIR-655 for years and have loved it, but recently it started acting up. I have a complicated setup saved as a gateway settings file (.gws).  I decided to purchase a new DIR-655 for the ease of importing my settings without having to manually setup again, however, much to my dismay, the new file format for the configuration settings on the Rev B is not .gws but rather .bin.  The .gws file will not import. I tried changing the file extension to .bin with hopes it might import but no luck. I also found the utility which decrypts the .gws file into .xml and used those values to manually re-enter the settings into the Rev B router, but my port forwarding is not working the same.  I was wondering if there is any utility to convert the .gws file to the .bin file in order to import into the Rev B router, or if not, can I still purchase the Rev A model somewhere. The online shops I've checked do not list the hardware version. 

View 7 Replies View Related

Linksys Wireless Router :: WRt610N Disk Storage File Format?

Mar 25, 2012

I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: Testing OCSP Servers For Certificate Validation On ACS 5.4

Mar 14, 2013

I'm currently having issues testing OCSP servers for certificate validation on ACS 5.4. Server team claims everything is fine on their side, but all attempts result in the following error:12562  OCSP server response is invalid
 
I've already tried to disable NONCE extension support and signature validation, which hasn't really had any effect. How to debug OCSP processing or look into the problem more precisely another way?

View 7 Replies View Related

Belkin Routers :: N150 Firmware Upgrade Giving File Format Error

Mar 19, 2013

I bought belkin N150 recently. I tried to configure with my ISP. They are surprised how I don't have DHCP option in the wifi configuration and asked me to upgrade my firmware. When I tried to upgrade. I downloaded the firmware from [URL] tried to upgrade. It is showing file format error.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Csv Import Fails

Dec 6, 2010

I'm trying the csv file import and getting some errors.
 
010-12-07 14:23:47: File Format Validation Completed2010-12-07 14:23:47: Import Started

2010-12-07 14:23:47: Record number: 1, Host 01-02-03-04-05-06: Import Failed2010-12-07 14:23:47: null Import process failed for unexpected reason: Unknown error has accurred.2010-12-07 14:23:47: Import Completed With errors

-------- Summary --------Total Number of Records Processed:1Number of Records Failed:1Number of Records Imported:1---------- End ----------Please refresh the table to see the changes.
 
On some other tries I get null field or missing fields.
 
It actually creates the host, but on editing it I get the following message:
 
An unexpected error has occurred. To continue your work, reselect the option in the left navigation bar.If you continue to receive the unexpected error message, close your browser and log in to ACS again.If you still receive the unexpected error message, contact your system administrator or technical assistance.
 
MACAddress:String(64):Required,description:String(1024),"enabled:Boolean(true,false):Required",HostIdentityGroup:String(256),VLAN:String(256):Required,attr-Expiration Date:Date(yyyy-Mmm-dd)01-02-03-04-05-06,AAATest,true,,Guest,2010-Dec-08

View 3 Replies View Related

Cisco AAA/Identity/Nac :: Cannot Import Certificate To CSACS SE 4.2

Mar 2, 2009

I cannot import certificate from CA (Certificate Authority). When I attempt to install the certificate to CSACS SE 4.2, the following error occurs during installation: "Unsupported private key file format".

View 7 Replies View Related

Cisco AAA/Identity/Nac :: ACS V5.2 - Any Limitations On Import Users

Mar 21, 2012

on ACSv5.2...are there any limitations on the number of users that can be imported via CSV file...i.e. will the ACS handle 250,000 internal users for example?

View 1 Replies View Related

Cisco AAA/Identity/Nac :: Import Server Certificates On ACS 5.2

Jan 10, 2012

When I tried to import the file, there are two lines there, One is Certificate file, the other is for "Private Key File".
 
My question for you is, is this the private key of CA? My understanding has always been that the private key stays in CA only, not going to any other devices.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: Trying To Import VSAs Into ACS 1113 4.2

Mar 27, 2013

I have some VSAs to import into my 1113 box, but I am stuck before I can even start :-( I have an accountActions.csv file containing some VSAs (this is just a test csv file.) I also have an FTP server that is accessible from the 1113 system.
 
When at the GUI for the 1113 I do System Configuration --> RDBMS Synchronization I get the RDBSM Synchronization Setup screen all right. I have entered all the parameters associated with the FTP server, and selected manual synchronization. The problem is that there are no entries in the AAA Servers window at the Synchronization Partners section at the bottom, and therefore I can't get the 1113 to retrieve my accountActions.csv file, an action that (I guess) is triggered by clicking on the Synchronize Now button.
 
I do have an AAA Server defined in the 1113. It's a RADIUS server called Self, not assigned to any NDG.I guess I do not understand this at all. I just want to import some external VSAs. Do I need to have an external AAA server to accomplish this? If not, how do I get my local Self server to appear in the list of synchronization partners?

View 1 Replies View Related

AAA/Identity/Nac :: ACS 5.2 Import Internal Hosts?

May 17, 2011

Trying to use the "File Operations" option to import hosts into ACS.  I go through the wizard and click "Finish", the pop up goes blank and just hangs there.  No errors are generated. 

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 Unable To Properly Import IP Ranges

Apr 17, 2013

I have multiple AAA Clients that I need to add. The way I manage the clients, I often make changes of moving IPs from one group to another. I require that all clients use "IP Ranges". I try import the following IPs (8.8.8.1;8.8.8.3;8.8.8.9-10;8.8.8.25) I need them all to be ranges, but what happens is after I import it, I then go to that AAA Client, it makes them all "IP Range(s) By Mask" and siplays it like this.

View 4 Replies View Related

AAA/Identity/Nac :: ACS 5.4 Import Users With Expiration Date Field?

Apr 7, 2013

between fields in import template file (add or update) for internal users is no column for expiration date ([URL]). This field is not defined also for export file.
 
My question is: (How) is it possible import new users (or update existing) into internal db with expiration date field?

View 3 Replies View Related

System Restore Failed To Replace The File

Jan 4, 2012

After unable to connect to my wireless network, I did a restore - but got a message: System restore failed to replace the file (C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking98c An unspecified error occurred during System Restore (0x80070002)I've tried 3 restores to get the same message.Am at a loss to get the computer back on line.Running win7 (32Bit) with Norton 360.

View 9 Replies View Related

Cisco :: RME 4.3.1 / Failed To Export Detailed Device Report To CSV File

Apr 15, 2010

I try to export a Detailed Device Report to a CSV. It failes:
 
<HTML><META HTTP-EQUIV="content-type" CONTENT="text/html;charset=utf-8">
<H1>HTTP Status 500 - </H1><HR SIZE=1 noShade>
<P><B>type</B> Exception report</P><P><B>message</B> <U></U></P><P><B>description</B> <U>The server encountered an internal error () that prevented it from fulfilling this request.</U></P><P><B>exception</B>

[code].....

Exporting to PDF works OK.CW is running on Windows server. RME is 4.3.1

View 11 Replies View Related

Cisco VPN :: ASA 5505 Error Copying X To Temporary RamFS File Failed

Nov 16, 2012

[OK] webvpn
webvpn
[ERROR] anyconnect image disk0:/anyconnect-win-3.0.08057-k9.pkg 2
copying 'disk0:/anyconnect-win-3.0.08057-k9.pkg' to a temporary ramfs file failed
 
Trying to add the windows anyconnect to the list of usable software for clients and that error happened. What is going wrong? I assume I dont have enough RAM...

View 1 Replies View Related

Cisco WAN :: 3560x Switch - Copying IOS File To Flash / Failed To Boot

Jan 20, 2013

I have a 3560x switch with the flash formatted . I have tried to solve the problem by copying the IOS file to the flash. But the boot failed either .I have tried to copy the same IOS by the Xmodem, The boot failed again.My question is how to fixed the boot issues after the flash was formatted?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved