Cisco AAA/Identity/Nac :: ACS 5.2 - Guest NAC Radius Authentication
Oct 31, 2010
For some reason, i can't get the lobby "sponsors" to authentication to the Guest NAC server (2.0.2) using ACS 5.2 via Radius.I was able to figure out how to get the Guest NAC Radius Authentication for "Administrator" to work by adding custom Radius value IEFT-6 under...
Policy ElementsAuthorization & permissionsNetwork AccessAuthorization Profiles
I added a policy & under the Radius Attributes Tab... I manually entered an Attribute that looks like the following:
Dictionary Type: = RADIUS-IETFRadius Attribute: = Service-TypeAttribute Type: = EnumerationAttribute Value: = StaticValue = "Administrative"
I then created an Access Policy... I looked for a specific AD group - Result = "Name of Custom Policy Above"...
All of that is working just fine.... the NAC Guest Docs tell you the Radius server must return a value of IETF-6...
When it gets into the Sponsor section, it doesn't tell you the value your Radius server should return... so just for grins, instead of "Name of Custom Policy Above", I tried "Permit Access"... i tried the "Name of Custom Policy above"... Not sure what else to try to get this to work...
here is a like to the document i'm following: URL
Page 68 refers to the "Configuring Sponsor Authentication" for Radius.. it just tell you to add the Radius Server & change the authentication order.
View 9 Replies
ADVERTISEMENT
Nov 22, 2011
I have been trying to get our IPS (ASA-SSM-10 and 4260) to authenticate with Cisco Radius ACS 5.2 and they are not working. However, I was able to get them working with Microsoft Radius. Below is the logs from the IPS:
evStatus: eventId=1321566464942057375 vendor=Cisco originator: hostId: NACAIRVIDLAB1 appName: authentication appInstanceId: 350 time: 2011/11/23 17:50:38 2011/11/23 09:50:38 GMT-08:00 controlTransaction:
[Code].....
View 0 Replies
View Related
Mar 10, 2011
I have a questión about radius authenticaction with AD, when I log in into the network with user in AD and I make a mistake in password my radius authenticaction event in ACS 5.2 dont show me this logg. only show the authentication succeeded but dont show me the authentication failed. Maybe i must to enable same service to show the authentiaction failed. The Voice authetication works fine..
This is the confg in the port of the switch:
interface FastEthernet0/12 switchport mode access switchport access vlan 2 switchport voice vlan 10 authentication port-control auto authentication host-mode multi-domain authentication violation protect authentication event fail action authorize vlan 11 authentication event fail retry 2 action authorize vlan 11 authentication event no-response action authorize vlan 11 authentication periodic authentication timer reauthenticate 60 mab dot1x pae authenticator dot1x timeout tx-period 10 dot1x max-reauth-req 3 spanning-tree portfast end
Vlan 2: DATA
Vlan 10: VOICE
Vlan 11: GUEST
View 1 Replies
View Related
Dec 22, 2012
Using Cisco ASA I want the ssl clientless vpn users to be authenticated through a local Radius-Server. but it does not work, and on asa while i want to see (Debug Radius) output, there is no debuging msgs displayed. When i try to test the user which i have created on the ACS-Server 4.2, the test gets successful. where i have made a mistake in my configuration ?
View 2 Replies
View Related
May 24, 2011
I am trying to authenticate on Juniper NSM express using cisco ACS 5.2. The request is arriving at the cisco ACS but i am getting the following error.RADIUS requests can only be processed by Access Services that are of type Network Access.
View 4 Replies
View Related
Jan 9, 2012
I am having ACS 4.0.2 in my network, which I want to use for 802.1x Radius Authentication for Clients on PEAP-MSCHAPv2 methodology.As per the documentation " EAP Authentication with RADIUS Server", Doc ID: 44844.I have configured Network Configuration and populated AAA client IP range and Secret Key.
Question1: Under Authenticate Using option, there are various RADIUS flavors available for selection. For a Non Cisco AAA client, should I select RADIUS IETF?
Question 2: In the above snap shot, It has an option called Global Authentication Setup, where we can setup EAP configuration. Under PEAP subsection there is an option to "Allow EAP-MSCHAPv2" check box.After checking that, is a restart required to the ACS Server? Would it cause any disruptions to the existing services on the ACS?
View 3 Replies
View Related
Jul 4, 2012
how to setup ACS 5.3 to authenticate wireless users over radius? I currently have the SSID pointing to a Microsoft IAS server and would like to move the authentication to be done via ACS.
View 1 Replies
View Related
Jan 19, 2012
I have configured a Cisco 877 router to send RADIUS requests when a user logs in to the console (Line Console or Line VTY) using the following config:
aaa new-model
aaa authentication login default group radius
aaa authentication ppp default group radius
radius-server host 10.0.0.1 auth-port 1812 acct-port 1812 key mysharedkey
When I log the RADIUS packets I see that the Cisco router is sending the initial AccessRequest using PAP.
How can I configure the router to send it's inial AccessRequest packet using CHAP?
View 5 Replies
View Related
Jun 3, 2011
Several of my older netscreen devices only support radius authentication and I'm having trouble migrating them from ACS 4.2 to ACS 5.1. When I try to authenticate, the authentication passes in ACS but it doesn't log you into the Netscreen (you see a auth failure in the Netscreen logs). I believe that the custom attributes are not being passed from ACS to the Netscreen. The custom attribute we are trying to pass is "NS-Admin-Privilege" with type integer and a value of 2. The netscreen is setup so that the user privledges are obtained from the ACS server.
Any setup where they are using Cisco radius authentication to authenticate Netscreen devices?
View 2 Replies
View Related
Jan 13, 2012
I've setup my ASA 5510 to use AAA to my Windows Server 2008 NAP. After many hours of troubleshooting I got my setup to work. The only thing I'm not satsified with at the moment is, that RADIUS is using PAP for communicating between ASA5510 and W2K8/NAP.I've tried ticking the box "Microsoft CHAPv2 Capable" box under Users/AAA => AAA Server Groups => Edit AAA Server.From EventViewer on W2K8/NAP I get Event ID 6278 and 6272., see attached filehow I change from the PAP to the CHAP protocol?
PS: ASA 5510 running ASA version 8.2(4) and ASDM version 6.3(5)
View 4 Replies
View Related
Mar 24, 2013
i am trying to assign a right role for a user who authenticates to nexus 7k switch via radius. i am using cisco ISE version 1.1.1.268 and the nexus version is 5.0.2,I have created a role on nexus.
View 1 Replies
View Related
Mar 13, 2012
I have setup my radius server access on the Nexus but am unable to authenticate through putty. If I do a radius-server test on the Nexus it says I authenticate. Here is the log I am getting.
2012 Mar 14 16:03:21 switch-a %AUTHPRIV-4-SYSTEM_MSG: pam_unix(aaa:auth): check
pass; user unknown - aaad
[Code].....
View 1 Replies
View Related
Mar 19, 2012
I am trying to get AAA authentication for HTTP to use radius, and seem to be having problems with setting the priviledge level. It works fine with SSH login, but doesn't work with web management. The model is a WS-CBS3130X-S-F running 12.2(58)SE1 with http version 1.001.002...
Config is as follows:
aaa new-model
aaa authentication login VTYSandHTTP group radius local
aaa authorization exec VTYSandHTTP group radius local
ip http server
ip http authentication aaa login-authentication VTYSandHTTP
[code]...
This is what I get when I try to log on to HTTP
HTTP AAA Login-Authentication List name: VTYSandHTTP
HTTP AAA Login-Authentication List name: VTYSandHTTP
HTTP: Authentication failed for level 15
View 3 Replies
View Related
Jan 29, 2012
I have configured Radius authentication on Windows 2008 server (NPS) The following configuration is working perfectly on Cisco Switch 3560. [code]But, the same configuration is not working on Cisco Catlyst Switch 6509 (C3560-IPBASEK9-M), Version 12.2(46)SE, RELEASE SOFTWARE (fc2)/
View 2 Replies
View Related
Apr 19, 2011
I am trying to integrate Cisco ACS 5.2 in a network to do device authentication of switches for administrators.
I am not sure if Cisco ACS 5.2 support RADIUS protocol to do device authentication. In the configuration of the Cisco ACS 5.2 I can only see TACACS authentication for device authentication and I have configured it and it works. If CISCO ACS 5.2 supports RADIUS auth for device authentication?
View 1 Replies
View Related
Nov 1, 2012
Would like to check out some client side setting on Wireless 802.1x authenticaiton.
Network setup is using
- Cisco WLC 7.2 and AP3500,
- ACS 5.3
- Microsoft Windows server 2008 hosting AD and CA services (same machine)
- Client OS is Microsoft Window 7.
Authentication mehtod would use PEAP-MSChap V2 Combo.
My question :
01. In AD environment, should ACS 5.3 be part of the domain computer?
02. To have secure connectivity, IF the security policy force client to check "Validate server certificate", which certificate it is look for? Is it ACS's identity certifate, that require CA server to sign on the CSR?
03. Back to client side, should the client also need to import this certificate in trusted root certification authorities?
Or the client will trust ACS identity certificate against the root CA certificate store at client's trusted root certification authorities, where they have the identical issuer?
04. Extra question: If no CA environment, would it be sufficient simply export ACS self-signed certificate and import to client computer, and it's trusted?
View 3 Replies
View Related
Aug 18, 2011
Find here the extraction of the configuration and the debug sysout. The radius servers works fine with all the other accesss like ssh, telnet...
Just the http access fail. This configuration work fine with the version 12.2.55 installed before.
Aaa new-model
aaa authentication login default group radius local
aaa authentication login physique local
[Code].....
View 2 Replies
View Related
Jul 13, 2011
is it possible to set the dot1x guest-vlan on a Catalyst Switch via ACS 5.2 dynamicly. I want to make MAB with known Devices (FAT-Clients, Notebooks, Desktops, Printers) and unknown Devices.I will set the VLAN dynamicly with dot1x per ACS. For known FAT-Clients, Notebooks etc. it's running well.But for Printers it's more difficult because I have about 500 Printers in several IP-Segments on several Switches and I will not make to much Rules in ACS for Grouping, Mapping and Authority-Rules.My Idea is to set the Guest-VLAN on every Switch, read them with ACS and use this for my Printers.The Problem is that Guest-VLAN is set on more than 100 Switch and this guest-vlan is different on any Switch.Can I read the Geust-VLAN Value so that I can set this via ACS ?
View 4 Replies
View Related
Jan 9, 2012
I'm trying to find out the options for authenticating remote users via IMEI and MISDN values via ACS 5.3/I'm unfamiliar with the Radius attribute options here and what kind of request/response we can utilise. Also previously I could define IP pools on ACS 4 but can't seem to do that now. Is there a way have ACS 5.3 to provide a DHCP server address for the connection ?
View 6 Replies
View Related
Mar 3, 2012
I'm somewhat new to ACS and am trying to complete a migration from 4 to 5.3.Currently, I've got ACS joined to my (2003) domain, and it shows status connected (although the test connect fails). I have aaa working without issue for TACACS, but all RADIUS authentication is currently failing. Logs show the message below: "24401 could not establish connection with acs active directory agent"I'm not seeing anything telling in the logs on the domain controllers.
View 1 Replies
View Related
Sep 19, 2012
We are setting up a new office and I am trying to get RADIUS setup for authentication to my switches and routers. Currently I am working on a 3750 running IOS 15 and getting hung on what I think on something small. I have attached my Microsoft NPS Network Policy. Below is my IOS config:
aaa group server radius corp-radius
server 10.15.10.20 auth-port 1812 acct-port 1813
!
aaa authentication login default group corp-radius local
aaa authentication login radius-localfallback group corp-radius enable
aaa authorization exec default group radius
[code]....
View 4 Replies
View Related
Apr 19, 2011
I've been working on trying to get RADUIS authentication working for devices connecting to our corporate mobile APN. Out APN provider sends us Username & Password attributes which I can authenticate fine using ACS 5.2 but I'm having a problem using other attributes sent in the Access-Request. We have mobile SIM cards with an MSISDN value match with a physical device with an IMEI value. The SIM cards cannot be used in other devices, only their matched device. The provider passes us the MSISDN attribute under RADIUS-IETF 31 and the IMEI under a VSA of 3GPP-IMEI
What is the best way of being able to authenticate a user and match the MSISDN and IMEI associated to that user?
View 1 Replies
View Related
Jun 5, 2012
Can use ACS 5.2 as Guest user authentication server?
View 3 Replies
View Related
Apr 29, 2011
I installed NGS 2.0.2 for wireless guest user management and authentication. I implement webauth via webauth page on wlc deployed.One Branch with a WLC5508 version 7.0 wireless anchor controller is working on the NGS.But now I integrate next branch with WLC4402 version 6.0.188 and the authentication of users at the new branch gets an error, wrong user/password.
I double checked configuration and user/password but I can't find any configuration error. Also stopping and starting of radius service and reboot of NGS still does not work. I tried to debug the radius via web interface and watched for the loggfile and there is still a reject.I also tried the freeradius command radiusd -X but I got an error when starting the radiusd -X.
1.) How can I figure out, if I will get the correct password from my WLC ? Are there any debug options to see more ? e.g. some cli commands, radiustest utilities or how to get the received password from the chap challenge of the debug ?
2.) I have appended a part from my radius loggfile. How can I find the detailed error in the radius log file? Is it correct that the password in the debug file is empty ? raiuds logg line "[radius-user-auth] expand: %{User-Password} -> "
View 3 Replies
View Related
Jun 28, 2012
I am attempting to configure Radius authentication accross a site-to-site VPN for my ASA 5510-01 for remote access.
ASA5510-1 currently has a live site to site to ASA5510-2.
ASA 5510-1 - 10.192.0.253
ASA 5510-2 - 172.16.102.1
DC - 172.16.102.10
ASA5510-01 can ping the DC and vica versa but is unable to authticate when i perform a test. ASA5510-01 can authenticate to a DC on it;s own LAN but not on the remote LAN that DC sits on.
I have double checked the 'Server Secret Key' and ports as well as various users which all work locallly. ASA5510-02 authenticates to DC with no problems.
View 3 Replies
View Related
Apr 25, 2011
I am running ASA version 8.4(1), and anyconnect version 3.0.1047. My SSL VPN works fine, but i run into an issue with one user . his account did not work , and everytime users logged in it got this message "VPN Server could not parse request".
I found the problem after getting a user information meaning his username and password. His password had "&" as one of the special characters. when we change it to something that does not have that , it works just fine.
We are using microsoft NPS server as radius. but when i run a test within CLI it works just fine, only when anyconnect asks to authenticate it fails.
View 5 Replies
View Related
Aug 6, 2012
Any software to measure Authentication time between client and Radius serverr.
View 8 Replies
View Related
Nov 14, 2011
I'm running WCS 7.0.220.0.I would like to authenticate users that are able to logon the WCS, through MS Network Policy Service (RADIUS).I would like all my domain users to be member of the local group on the WCS "Lobby Ambassador", so all domain users has access to generate guest access accounts, for the web auth... I can see under the WCS Administration under AAA that it should be able to use RADIUS - but i'm not sure how to setup the NPS policy?
View 1 Replies
View Related
Jan 3, 2013
I am configuring an old WLC4400 with V4.2.130.0. I added a new sub-interface for VLAN 50 with proper IP for the subnet and then add the Radius server(Windows server 2008 with NPS) onto WLC4400. I then created new WLAN with WPA+WPA2 Encryption and 802.1x key management and selected the Radius server under AAA for authentication.
Configured the test XP with WPA-Enterprise and PEAP as EAP method. I purposely configured computer to prompt for username and password.
When I try to connect, I did get prompt for username and password. However after that nothing happens. It seems like laptop just keep trying to authenticate.
I checked windows event log and do not see anything under NPS. I know this windows server NPS setup works as it is also the authentication server for our remotevpn.
is there any special option I need to turn on for WLC in order for Radius authentication work? Or is there any known bug with V4.2.130.
View 13 Replies
View Related
Aug 11, 2011
I'm in the process of moving some of our remote access vpn to an asa5520 and anyconnect.
The problem I've come across is that when using radius as authentication, I choose any one of my connection profiles in anyconnect and log in with any username regardless of the group on radius.
How do I map the connection profile to a group on radius so that i can separate the users?
View 1 Replies
View Related
May 17, 2011
I have a 5510 authenticating successfully with a RADIUS server. I'm using it for VPN authentication and it works great. I would also like to do this for administrator access to the ASA. When I turn it on though, any authentication for VPN access is also granted administrative access to the ASA. Obviously, I need to limit that to a select few users.
View 1 Replies
View Related
Sep 2, 2012
which is the best RADIUS server for 802.1x wired authentication?
View 1 Replies
View Related
Nov 6, 2011
I am trying to setup a RV042 for a Client VPN using AD / Radius authentication. When it was purchased I saw radiuslisted as a feature on it, but I'm not seeing a way to set this up.
[URL]
I have upgraded to the latest firrmware, I have a VPN working with accounts on the router that I manually create, but am not seeing anyplace to configure radius.
View 5 Replies
View Related
