Is it possible to export internal ACS users from an ACS 4.x Windows (On ESXi), solution to an ACS 5.x solution. All I want to be able to do is export usernames and passwords out of the 4.x solution and then import them into the 5.x solution. I thought maybe the CSUtil program be used ?
View 3 Repliesthere seems to be a problem when I try to import a .csv file to ACS 5.1. After following the procedures for file exports and clicking finish I am left with the screenshot of the ImportAction window attached. According to documentation this window should allow you to monitor the progress of the bulk operation,but there is none of it.
View 3 Replies View RelatedI have installed ACS 5.4 and we are looking to authenticate our Anyconnect users with ACS via Active Directory. I think I have the correct commands in our ASA ( we had ACS 4 and authenticated our anyconnect users ).
I also have configured ACS to use Active Directory and installed the server side cert in ACS. I'm just uncertain how to program ACS to use the security group that I have setup in Active Directory.
I am running 3.1 and 3.2.1 at different clients.
When i run a discovery to it lists the new devices and states that the devices are reachable.If i do a search in device management i see the device with its listed ip and device info.
As soon as i search for the device in DFM after manually adding it i get the following message (see attached)I get the same message on both platforms for different devices.I have tried to add it both manually and automatically.
I have been looking for a document that outlines the process for importing data, devices, and saved configs from CiscoWorks 4.0.1 to Prime Infrastructure 1.2. First of all is it possible? And if so, where is a document I can reference?
View 3 Replies View Related My customer has SSL certificate already installed on microsoft exchnage 2010 servers and now wanted to import that certificate to cisco ACE4710.
How to trace the exact procedure to import the SSL Cert to ACE from microsoft exchange server and how about the KEY, from where I should get the KEY to cross verify for SSL Cert?
We have remote users that dial-in over ISDN to a Cisco 2911. We have configured AAA to pass the authentication off to a RADIUS server. Once successfully authenticated, the router permits the users to access a single web server. However, we need to do some testing in our test environment, but unfortunately we don't have an ISDN line to test with. We have created a little environment in our LAB using a 2911, a switch, a RADIUS server & web server. I was hoping that we could simply create a "user" VLAN off the back of the 2911 to simulate our remote users, and access the web site from the test usr PC's over the LAN. I was hoping that the 2911 would be able to intercept the connection and pass the authentication off to the RADIUS server (as it does with the PPP ISDN traffic). But I cannot find anyway to do this, because I can only configure AAA to offload either PPP traffic or telnet/ssh connections to the router itself.
In summary what I want is for a user to access an internal web site over a LAN interface of a 2911 - but have the 2911 authenticate the user via a remote RADIUS server first. Is there a way to configure a 2911 (or any router!) to do this?Is the answer to configure port-based authentication (802.1X) on the switch?
How to configure the ACS5.0 radius for remote access VPN authentication.
And how could I implement the IP Pools for the VPN users.
After some time no using Cisco ACS5.1, I still don't know how I can see all logged in users. I can see logging and check why an log in goes wrong, but in ACS 3.2 I just clicked on Reports and Activity and I could choose to see logged in users, or failed attempts, etc.
View 2 Replies View RelatedI have an issue with an implementation, I had a ACS R5.1 that I'm using to authenticate the wireless users with 802.1x, that's OK and working fine. Now I want to use the same ACS to authenticate wired users using MAB (for IP phones, printers, servers, and other devices) and 802.1x (for corporate users). I already configured the authentication services (MAB and 802.1x) on ACS, but when I'm doing tests I can see that for example the phones are trying to authenticate using the 802.1x rules of wireless connection, not using the MAB rules. [code]
You could also see an screen from the ACS in the attached file. On the picture remark you could see a IP Phone trying to authenticate using the wireless Access Services insted of using MAB.
on ACSv5.2...are there any limitations on the number of users that can be imported via CSV file...i.e. will the ACS handle 250,000 internal users for example?
View 1 Replies View RelatedI'm at the point of setting up admin access for engineers needing to have insight into the operations and status of our ACS 5.3 systems. any way to create a Dashboard that can be applied to all admin user accounts? (perhaps a custom role?)I've been able to customize the dashboard for my own account to show what is most relevant, but am unable to figure out how to apply this layout and setup to all other users.
Basically, I have a number of folks that need to see this data, but that I can't exactly count on to setup their own dashboards to show the important details. If there were some way to build a tab/dashboard/portlet, etc (whatver it may be) and have it apply to all users, that would save me TONS of work so that I don't have to login to each person's account and set things up for them.For example, I want to have all users see a tab/dashboard that shows the applet "Live Authentications", but with the protocol already configured to display TACACS vs the default which is RADIUS.
Having an issue with Cisco ACS v5.1.0.44 and the Cisco WLC 5508. Cannot get users to authenticate and keep getting error messages referring to EAP session timeouts from WLC filling our logs. Seems to be with this model WLC because we have Cisco 4400 WLCs pointing to the same ACS with no issues. Is there a bug or special configuration that is necessary to marry the 5508 with ACS v5.1.0.44?
View 9 Replies View RelatedIs it possible for ACS 5.1 to only allow specific AD users to authenticate the switches and routers? Currently What I have configured is only for all AD users. I can't seem to find a way to be selective.
View 9 Replies View RelatedDo you know if it's possible to use ACS 5.x in such manner that the admin users (so not the end users, but the administrator users of ACS) are authenticated against and external database, like Active Directory?
View 2 Replies View RelatedI have cisco ACS 5.2 and external identity source as RSA secure ID.Currently when the RSA user login to AAA Network devices, User id & passcode prompt coming after giving the credential its going to user exec mode.Then after "enable" command again asking for Passcode giving passcode then user able to logged in successfully.
I need RSA users to get direct privlege level15 (privlege mode) ? no need to ask enable password ?
I checked this for local ACS users it is working and loca users getting directly privelege mode access...
I'm working with a cisco wlc and acs 5.3 . I have two profile or ssid's and one of them is working with web authentication and the accounts exists in the local database of cisco acs.
I'll would like to know how can i should configure mac authentication on the cisco acs 5.3?
My purpose is authenticate users first by mac, and second by the account of local users in the cisco acs.
Using Cisco ASA I want the ssl clientless vpn users to be authenticated through a local Radius-Server. but it does not work, and on asa while i want to see (Debug Radius) output, there is no debuging msgs displayed. When i try to test the user which i have created on the ACS-Server 4.2, the test gets successful. where i have made a mistake in my configuration ?
View 2 Replies View RelatedWe want to deploy NAC for 500-600 users across WAN. We are planning for L3-OOB-Real Gateway central deployment Solution.We are having two NAC Server (3355) two NAC manger (3355) at HQ and 6 NAC Server(3315) at branch. We deployed NAC under VRF.How we can deploy NAC over WAN without NAC Server, need step by step configuration under VRF.
View 1 Replies View Relatedits been a while since I configured a Cisco firewall (PIX 6.0, SDM) - I've now been thrown in the deep end with a pair of 5525-X's (Latest Software) and I need to achieve the belowWebsense integration (Got this working)AAA Authentication for various outbound traffic routes.I'm using ASDM as I'm more comfortable with the GUI than CLI (I'm the other way round with switches!!!), I have AD Agent configured but the ASA isn't doing anything based on User Name but I have a few other things to try. What I'm trying to achieve now is ignoring certain user names from being matched to IP Addresses as I believe that this may have something to do with it.We use Sophos AV and each PC requires a Service Account to run Sophos under. Each update that Sophos attempts is seen as a login and that is the user attached to the IP Address of the machine. Within Websense, it can be told to ignore certain users for purposes of filtering and reporting etc.. but I dont seem to be able to do this with the AD Agent.
View 3 Replies View Relatedwe have TACACS+ based AAA on our network equipment, authenticating against internal user database on a network of ACS 5.3s.What I want is to limit certain AAA users (namely automated tools) to be only permitted to authenticate from a list of known IPs.I can do this for authorization, easily, that isn't a problem. The problem is to only accept authentication attempts coming from certain IPs and ignore the rest. My problem is, as it is currently, the automated tools are prone to a sort of a DoS attack - if I attempt logging in to any device using the tool's user account and a wrong password, I can get the account disabled in five tries.
I want to ignore all authentication attempts, unless they are coming from well known source IPs.Ex: netmon user is the user for a tool running on server 10.20.30.40. If I try to log in from my own laptop with user netmon, it should fail, and the attempt ignored. Currently after five (or whatever is configured) failed attempts, the user will be disabled. Oly attempts from 10.20.30.40 should be considered for user netmon.I can't use ACLs on the devices, as I want other users to be able to log in from other IPs.
I have a Cisco ACS 5.2 and have set it up as a RADIUS server. I was wondering if there is a way to add and update users automatically? We have a large number of users > 1000 that need to be added into the system and I don't want to do this manually. These users also update their passwords on a regular basis so I would need a script that would update the users automatically without any user intervention.
View 4 Replies View RelatedI've successfully integrated ACS 5.3 with Active Directory for 802.1x implementation. Now i want to cache Active Directory users in ACS so that the user request from ACS does not go to AD every time.
After a certain time period the ACS database gets sync with AD.
The ACS can authenticate people using local database , it can also authenticate a single user (using windows database) if you are fast after the service is restarted , however after a few secounds, it fails to authenticate any users , the error we are seeing on the logs appear as authentication failure type : internal error. Also on the log files, the authentication request from the user does not appear in the correct group, it is thrown into the default group.
View 7 Replies View RelatedI have configured 1841 router as VPN server. All VPN users are getting authenticated using radius in ACS 4.1 I need to apply per-user downloadable ACL.
I have configured ACS for the Downlodabale ACL. Even ACS report acivity shows that ACL is applied to the authenticated user, but the traffic is not blocked or passed accordingly.
I am trying to get users in the external identity store (AD) to be dropped directly into enable mode after being authenticated, since I don't know of a way to set an enable password for users in an external identity store. I think it has something to do with shell attributes but I'm not realy sure.
So here's what I tried.Linking identity group to external group and provide full command priviliges - enable still didn't work Creating duplicate users in the internal identity store and setting the password type field to AD1 - That gives me the ability to get to the enable password prompt hit enter on the blank promt then prompts for Old and new passwords but fails everytime with an Error in Authentication.
I have ACS 4 integrated with RSA 6.1, where users of ACS can authenticate their passwords with the rsa server.I am migrating users to ACS 5, and I want to integrate with rsa.
I am configuring rsa as “rsa secureID token servers”.But how should I configure the users on acs to authenticate the password with rsa?
Previously on acs 4, on the user page, in password field, I select authenticate with external DB, Also, any guide for the config on rsa 6.1 side (with acs 5)
I'm trying to setup ACS 5.2 with an ASA v8.3.2 to lock users into VPN groups based on a users AD group. I've tried various combinations but the group lock isn't working. I've done steps 1 & 2 ...
1) Network Devices and AAA Clients -> Define VPN
2) Users and Identity Stores -> Setup AD and Directory Groups, test connection
Policy Elements:
Q1) Policy Elements - Do I need an authorization profile for each group:
Q2) What RADIUS attributes should I use to match my ASA tunnel-groups?
RADIUS-IETF attribute 25?RADIUS-Cisco VPN 3000/ASA/PIX 7.x 85 (Tunnel-Group-Lock)?Other?
Access Policies:
Q1) Do I need to enable and use group mapping?
Q2) Do I need a Network Access Authorization Policy for each group?
I have ACS 5.1 configured to authenticate users based on Active Directory. I have configured wired 802.1x too, with machine authentication enabled on ACS.When I login with credentials that exist in AD, it works fine. Then I configured Windows Authentication to ask for credentials (popup window). But I experience network disconnection when I login with a local account even though I entered correct AD credentials.I want to do the following: for an account that exist on the machine being authenticated (non-AD account), ACS should check its local database and reply with authentication success if it finds it, so the user is granted network connectivity.I heard about Identity Sequence in ACS. But I still don't see the right configuration,
View 2 Replies View RelatedI have 2 ASA 5520 (v. 8.21) in a active/standby fail over configuration.
VPN users are autenticated against the MS-AD through LDAP. For the most part this works well. Occasionally I'm having problems with new users in the AD. If I run a test I keep getting "User was not found". This can happen days after the account was created still. In some cases it never seems to work. The accounts I create exists on the same OU level as all the other accounts that are working.
We're running Cisco Secure ACS V5.1 on a Linux platform to manage remote access to many networking devices. This has not been in place long, and is generally working OK. However, whenever I set the parameters of the user authentication to 'disable user account after X days if password was not changed', so as to comply with our internal security regulations, the user IDs seem to disable themselves intermittently, irrespective of whatever number of days I put in this - this can be a couple of days after re-enabling, or just a few minutes.
This can be found in the advanced tab here: System Administration > Users > Authentication Settings.In the mean time, we are having to set the user authentication to be non-expiry. Is this a known fault with this version of software? If so, would there be a patch available, and how would I go about obtaining it?
We are running Cisco Secure ACS for Windows version 4.1(1)b23p5 on a Windows 2000 member server. Starting from today, ACS fails to authenticate users. Using the same external user (andrea-meconi) I can verify successfull and failed authentication. This is the AUTH.log for a genericRADIUS request...
AUTH 25/02/2013 15:30:24 I 0396 3900 External DB [NTAuthenDLL.dll]: Starting authentication for user [andrea-meconi]
AUTH 25/02/2013 15:30:24 I 0396 3900 External DB [NTAuthenDLL.dll]: Attempting
[Code].....
Web clients are receiving login failed messages and VPN clients are getting disconnected by host messages. I am able to ping the server from the ASA5510. Users authenticate in AD. I am not sure if the problem is on the server or the ASA.
View 1 Replies View Related