Cisco :: CON-PSUS-LMS410K9 Support Contract Part Number
Mar 27, 2012
my company just ordered fornew LMS release and exactly needed the support to open TAC's .I searched but couldn't find the part number for this,some one send me this part number CON-PSUS-LMS410K9,I searched but I could not find anything usefull.
View 2 Replies
ADVERTISEMENT
Feb 27, 2012
I've got the following licenses installed.
LMS4.0-750 devices.
If I now buy a software support contract for the above will that also entitle me to a free upgrade to LMS 4.1-750 or will I still need to buy a upgrade license.
View 2 Replies
View Related
Jan 23, 2012
How to know my asa 5505 Part Number
View 2 Replies
View Related
Aug 30, 2012
There are 6 part numbers for the RV180W router. What is the difference between them: wan access (Annex A,B ...) or other quality?
View 1 Replies
View Related
Sep 2, 2007
I have a switch with part number WS-C4006-S2 , and the fan tray for this switch is faulty, however,i do not know the part number for the fan tray, furthermore, i have found one fan tray's part number in cisco website, WS-X4005= with description :Catalyst 4006 Fan Tray (Spare);my question is i would like know whether WS-X4005= is the correct fan tray for WS-C4006-S2 .
View 2 Replies
View Related
Mar 20, 2013
the small fan of a SRP541w seems to have 'melted' it's way out of it's casing. How to know part number for a replacement fan for this router?
View 3 Replies
View Related
Jun 29, 2012
I recently upgraded my home network to include a new DOCIS 3 cable modem (SB 6121), RV 180 router, and a wireless access point. I have about 7 computers/devices on the network. A computer connected directly to the new modem was pulling down 30MB/sec (various speed tests), but when RV 180 was inserted between modem and network, downloads dropped to 10MB/sec. I worked with tech support (very kind), baselined the router, without improvement, and support conclusion was "hardware issue, need to RMA router".The one thing we failed to configure on the router was the Domain Name (Networking/LAN/IPv4 (local network)/DHCP/Domain Name:). Once I entered the domain name that actually matched the Workgroup / Domain name of the computers on the network, downloads and speed tests jumped to 30MB/sec consistently, and web browsing performance significantly improved.
View 11 Replies
View Related
Feb 17, 2007
Whether Cisco has part number for the large fan in 2811. I know p/n for small fan is already there, but I can't find any for large one( I think it s fan 3).
View 10 Replies
View Related
Mar 5, 2012
what's the Intel wifi 5300 part number for the Latitude E4300?I bought one off of ebay that seems to be a generic version but Win7 x64 keeps giving a "device cannot start (code 10)" error. The seller insists it should work for a Dell Latitude E4300 and he send me the correct part. I have tried the latest Intel driver to no avail. I might end up getting a refund from the seller.
View 1 Replies
View Related
Apr 13, 2010
What is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?
View 11 Replies
View Related
Apr 13, 2013
I am trying to find the part number for the Cisco SMARTnet Maintenance 8x5xNBD for the Cisco ASA5510-SEC-BUN-K9. I browse cisco website, tried dynamic config tool, forums etc but no luck.
1: How to know the part number for it.
2: Which tool can be used to find smartnet or other Maintenance details/partnumbers
3: Is there any specific tool other then Dynamic Config to generate BOM.
View 1 Replies
View Related
Nov 22, 2011
I see that if I ask for 887va-sec-k9 I get an 887va with "advanced ip services" instead of the default "advanced security".
I can't see a corresponding part number for an 887va-w with advanced ip services. Is there one? Also, what would the part number be for memory to expand a va-w up to the max possible memory?
At a guess it would be the same part used to upgrade an 887va from 256 to 768, but since the part to upgrade from 256 to 512 is not the same as the part to upgrade from 512 to 768 I am not sure this is a safe guess.
View 1 Replies
View Related
Jul 19, 2012
We have a NM-T3/E3-RF card that fits inside a 3800, but does not fit into a 3945.
The documentation says it works with 3900 ISR Routers.
Is there a cradle or adapter that is required?
Does the "RF" section of the part number differentiate this from a NM-T3/E3 card?
View 5 Replies
View Related
Jan 27, 2004
Subject says it all. This is the newer style cable that doesn't utilize the separate cable and the grey RJ45/DB25 connector. It's a one piece black cable that has a molded DB25.
the one cable I have lists the following on its label.
Cisco
72-3663-01
LDM 3303
View 3 Replies
View Related
Jul 3, 2011
I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
i saw part number ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
Note;i use ASA 5510.
View 1 Replies
View Related
Mar 29, 2013
I have a laptop Dell 1318 Inspiron. At the extreme right front corner of the unit, there is an open 'wireless' slot. There used to be something there. Someone stole it. I can't find what part to replace it. My computer does not do bluetooth now. I had to buy an external Netgear wireless adapter, which uses a USB port that I could use. What is the original equipment that goes in the slot? Is that why my BT is not working. <ADMIN NOTE: Email id removed per privacy policy,
View 1 Replies
View Related
Feb 26, 2013
What is the part number of the power-supply of this router (WRP400)? [code]
View 6 Replies
View Related
Jul 29, 2012
What is the orderable part number of Cisco 892 series routers.
View 1 Replies
View Related
Apr 30, 2012
url...For the New Firewalls i.e. 5512X , 5515X etc there seems to be integrated IPS and we don't need to order any extra license or part number to get the IPS features .
But for the 5585X It says 2Gbps for SSP10 engine but I have seen in the Dynamic Configuration Tool that SSP10 and IPS-SSP10 are different things . Which means that I will have to order 2 service engines SSP10 and IPS SSP10 to get the IPS features and if I only order SSP10 with that Chasis I will only get firewalling ?
View 3 Replies
View Related
Nov 16, 2011
how can i discover product actual part number from the device through console.I have a bought a cisco ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
ASA5540-AIP20-K9ASA 5540 Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA 5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA 5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco VPN Client Software (Windows, Solaris, Linux, Mac)1Included: ASA5540-VPN-PRASA 5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included: ASA5500-ENCR-K9ASA 5500 Strong Encryption License (3DES/AES)1Included: ASA-AIP-20-INC-K9ASA 5500 AIP Security Services Module-20 included w/ bundles1Included: ASA-180W-PWR-ACASA 180W AC Power Supply1Included: ASA-ANYCONN-CSD-K9ASA 5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1
View 6 Replies
View Related
Apr 18, 2011
I have a 3825 router running 12.4t IOS. I installed DSU/CSU part number HWIC-1DSU-T1 in the router and it does not recognize it. Is this the right card for this router? Is there anything I can look at to determine the issue? I think the router only has 32M RAM. Below is a show hardware. Card is still currently installed.
View 2 Replies
View Related
Sep 3, 2012
I did a sh inv on my newly built 2x Cat 3750X + Cat 3750-24FS stack running 12.2(58)SE2). It only showed 3 of the 4 Cat 3750X PSUs - Sw1 PSU 0, Sw2 PSU 0 and Sw2 PSU 1.
Switch#sh invNAME: "1", DESCR: "WS-C3750X-24"PID: WS-C3750X-24T-S , VID: V02 , SN: FDO*******D
NAME: "Switch 1 - Power Supply 0", DESCR: "FRU Power Supply"PID: C3KX-PWR-350WAC , VID: V01D , SN: DTN1533L00N
NAME: "2", DESCR: "WS-C3750X-24"PID: WS-C3750X-24T-S , VID: V02 , SN: FDO*******6
NAME: "Switch 2 - Power Supply 0", DESCR: "FRU Power Supply"PID: C3KX-PWR-350WAC , VID: V01D , SN: DTN1533L08M(code)
View 8 Replies
View Related
Jul 15, 2012
How to find out the upper limit of ACL on CISCO876-SEC-I-K9 router. How to measure performance parameter on the same as BGP is running on this router.
View 1 Replies
View Related
Jun 11, 2012
One of my customer has raised a new requirement for implementation of short sequence number format support in PPP multilink header for Cisco MWR 2941 E1/T1 serial interface, whereas router is supporting long sequence number format.here is the output of "debug ppp negotiation" command:-Currently in the MWR debugging logs we can see that by default MWR is sending long sequence header format as below
*Mar 13 01:32:55.438: Se0/2:0 LCP: O CONFREQ [REQsent] id 238 len 25
*Mar 13 01:32:55.438: Se0/2:0 LCP: MagicNumber 0x26CDF693 (0x050626CDF693)
*Mar 13 01:32:55.438: Se0/2:0 LCP: MRRU 1500 (0x110405DC)
*Mar 13 01:32:55.438: Se0/2:0 LCP: EndpointDisc 2 16.16.16.11 (0x1307021010100B)
*Mar 13 01:32:55.438: Se0/2:0 LCP: MultilinkHdrFmt seq long classes 2 (0x1B040202)
While as per the requirement PPP multilink header should support short sequence.
MWR configuration:
controller E1 0/2
framing NO-CRC4
clock source line
channel-group 0 timeslots 1-31
[code]....
View 0 Replies
View Related
Apr 29, 2012
I have bought 2 new ASA5505 with SmartNet contract. I already have my 2 SmarNet contract number. Now I want to add these 2 contracts to my TAC account, so I can have support for my 2 new products. My TAC account already have 1 SmartNet contract for another device I have.What is the procedure to add my SmartNet contract to my account?
View 2 Replies
View Related
Mar 11, 2011
I would like to add a second mifi 2200 to my current contract. (Same phone # & same bill.) That way I can use the second one while I'm on the road & my wife can use the first one at home!
View 2 Replies
View Related
Mar 8, 2013
I currently have 2 5505 SEC BUN as Primary/FO Firewalls and I am considering purchasing the ASA5510-AIP10-K9 for use as a dedicated IPS device. Looking at url... I see that for service updates, CON-SU1-AS1A10K9 is available for this product, providing "IPS Signature and Engine Updates" and "OS Updates."
It is my understanding that in the ASA5510-AIP10-K9 there are 2 OS:
1. ASA OS
2. AIP SSM-10 OS
My question is: Are both the ASA and AIP SSM-10 able to receive "OS updates" with this service contract? Essentially, I want to make sure that when I submit by budget, there isn't another contract that I also need.
View 8 Replies
View Related
Oct 23, 2012
I have a Cisco AIR-WLC2006-K9 in my Cisco lab where I work on my Cisco skills, I recently had the need to update the software on my WLAN controller but his is according to the website only available with a service contract. On trying to get a service contract I found that the device is EOL and EOS and ths no serrvice contract can be purchased for this device and hence no ability to download software for it. So here is my question, when a device is EOL and OES and service contract can no longer be acquired for a device why does Cisco not either open these up for download AS-IS or provide some kind of agreement for people like myself who have moslty EOL and EOS equipment in their labs where we can acquire the needed software to keep our skills sharp in an affordable way ?
View 0 Replies
View Related
Mar 26, 2011
I have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
View 13 Replies
View Related
Jul 22, 2012
What is the difference /how to show part number,part code and serial number on cisco ASA 5520 series.succeed to get serial number by command show activation-key detail..how to get part code /part number?
View 2 Replies
View Related
May 22, 2013
For "AIR-CAP3602E-E-K9 the compatible antenna is AIR-ANT2524DG-R". kindly suggest if antenna part # AIR-ANT2422DG-R= is compatible with AIP-CAP3602E-E-K9.
View 3 Replies
View Related
May 26, 2011
I am having linking a computer to our SBS server. The computer in question is set in a warehouse on our site. We have a leased internet connection which is used on a number of different offices. The sbs-server has an IP address of 192.168.50.254 with a gateway Ip address of 192.168.50.1. The firewall on this network has an external IP of 10.50.0.37 with a gateway of 10.50.0.254 and this links to the leased line equipment. The external IP address for this network is 62.7.70.237. The PC in the warehouse has an IP address of 192.168.0.2 attached via a router to the leased line. The routers Ip address is 192.168.0.1, the external IP address is 10.50.0.55 and a gateway of 10.50.0.254. This links to the leased line and seems to have an external Ip address of 62.7.70.238. My issue is that I want the PC in the warehouse to be able to connect in some way to the SBS-Server. I cannot seem to access it via the external IP or the gateway (10.50.0.37).
View 2 Replies
View Related
Sep 29, 2011
I saw at the Linksys page and saw Access Point was under the Range Extender.Is the Access Point part of the Range Extender?
View 11 Replies
View Related