Cisco :: Changing Password On WLC-2100?

Aug 31, 2011

I am currently running WLC - 2100 with software version : 7.0.98.0
  
My question is :
 
How to change the existing password ( not reset )  but change the password with the web interface ?
 
If that cant be done, then my guess is I have to do it via telnet/ssh session

View 4 Replies


ADVERTISEMENT

How To Set Password D-link Dwl-2100

May 29, 2011

i have a dwl-2100 access point. first can this be used as a regular wireless router, and second, i tried the 192.168.0.1, and connection got reset a few times, so what else can i do to set out a pswd?

View 2 Replies View Related

Changing Password On Linksys WRT54GS?

Oct 28, 2012

I've gone through all the motions to change my password and wireless network name, but the original password still appears Linsys admin page and so I can't hook up to wi-fi. Also I have no way of telling what the original password is.

View 14 Replies View Related

Changing The Password Of Netgear Router?

Jan 7, 2013

I need to CHANGE the password of my netgear router.

View 2 Replies View Related

Changing Or Getting Password For Wireless Network?

Apr 20, 2012

I'm trying to get and change my password to wireless network to hook up my table pc I just got

View 1 Replies View Related

AAA/Identity/Nac :: AD User Password Changing With ACS 5.0?

Oct 11, 2011

I use ACS appliance 1120 for cisco devices administration. The identity store is  external. I use Active directory. Actually, Authentication, authorization and accounting work well but users can not change theirs Active directory password when they have expired. Do you now how to configure ACS to permit password changing?

View 5 Replies View Related

Wireless :: Changing Default Password For Internet?

Mar 7, 2012

How do I change the password from the default for the internet?

View 1 Replies View Related

D-Link DIR-615 :: No Internet After Changing Password On Router

Apr 29, 2011

I recently set up my DIR-615 on my wireless netbook.  Everything worked fine and I could get online.  But then when I changed the password on the router, it bumped me off and now says Internet isn't available.  My phone can connect to Internet but not my netbook anymore.  When my netbook tries to troubleshoot it keeps saying "problems with router and adapter."

View 1 Replies View Related

Windows 7 Changing Wifi Password For Existing Connection?

Oct 5, 2012

There are a lot articles on the web about changing a wireless connection's password or security key. Pretty simple. But my computer does not remember the change and when trying to reconnect it still has old password and fails.

View 1 Replies View Related

D-Link DCS Network Camera :: 920 - Changing Admin Password?

May 16, 2010

Im having some problems changing my admin password on my DCS920

I know the default login is Login: admin / Password: "blank"

So I go into maintence, and there's an option to change the password.

it lists:

old password
newpassword
confirm

So I leave the old password blank and type in my new password in the following 2 spaces. I click apply and a window pops up asking me to enter username and password. I just enter admin and leave the password blank. I hit ok, and everything seems to update ok. So i log out, and try to log back in.

A window pops up asking me for my password. I type in admin for my username, and my new password, and it wont work

I type leaving the username blank, and type in new password... WONT WORK

I type admin, and new password again.. WONT WORK

I try password with first letter capital.. WONT WORK

I try password with ALL CAPS... WONT WORK..

Basically it wont let me log in as admin anymore. I figure I may have typed the password wrong the first time so I reset the camera and try the process again.. SAME PROBLEM.

Am I doing something wrong in changing my password ?

I dont wanna leave my default admin login as admin/"blank" , but when I try and change the password, it wont let me log in again as admin.

View 4 Replies View Related

Linksys Wireless Router :: Changing Password In EA2700?

May 14, 2013

I want to change password in my EA2700 but don't know how to do it. How to change password in EA2700?

Looking for [url]
Find the best [url]

View 1 Replies View Related

Beetel 220BX Modem Gets Hacked Everyday Despite Of Changing Password

Jan 27, 2012

I am in a problem, my modem gets hacked everyday, such that many of the sites do not open and only "http://212.113.36.83/" opens instead of sites like yahho.com, sify.com. I checked on internet many people are facing such issue.Only thing I can do to resolve this is to reset my modem, but still this gets hacked even on changing my password.I am not able to understand how is it possible to modify the settings of modem when I have changed the password.Modem Model: Beetel 220BX.

View 5 Replies View Related

Linksys Wireless Router :: E1500 After Changing Name / Password / Speed Became Much Slower

Jun 24, 2012

After changing name and password, the speed became much slower. Checking it with speed test, download is just 0.19 Mbps while upload is 3 Mbps. Wired speed is much better, download is 20 Mbps. So it is not the problem of I provider, comcast. How to solve this problem? I rebooted and reset it already.

View 8 Replies View Related

Protocols / Routing :: Canyon Wireless N Router CNP-WF514N1A Not Working After Changing Password?

Feb 19, 2012

I have a CANYON Wireless N Router CNP-WF514N1A. It was working properly, but I changed its deafult password to my own . (192.168.0.1 -> wireless security -> new pass -> okay -> reboot computer ). After I restarted the computer, the router stopped working. The lights on it are fine, and if I plug the net cable into the computer I have internet too. The problem is, if I plug the cable into the router, I don't have internet. And I can't open 192.168.0.1 either.

View 1 Replies View Related

Cisco :: How To Integrate WLC 2100 With ACS 5.0

Jan 17, 2011

i have a cisco ACS version 5.0, I need to authenticate a wireless users connected to WLC 2100 controller when i connect the controller to a Dot1x port in the switch , the port go down.

View 6 Replies View Related

Cisco :: ICMP / SSH With LWAPs Behind WLC 2100

Feb 27, 2011

I'm new to the Cisco WLCs and recently implemented a wireless infrastructure using a WLC 2100 with 1262 LWAPs. I have two of the 1262s plugged into ports 7/8 using crossover cables. They're functioning correctly with the exception of the inability SSH and send pings to the LWAPs behind the WLC. Is there anyway to ping/shh through the WLCs to the LWAPs behind it? I use an NMS (Nagios) to monitor the status of the LWAPs and it can't monitor them if it cannot ping them. Also, is there anyway to configure the WLC to monitor the status of LWAPs?

View 2 Replies View Related

DLink DWL 2100 CD Missing?

Jan 2, 2012

How do i setup my d link dwl 2100 ap at my new address. I have moved and my installation cd has gone missing. The install wizard wants to work off the cd

View 2 Replies View Related

Cisco Wireless :: Getting 3500 AP To Talk To WLC 2100

Jul 18, 2012

I am trying to config my wireless lan controller (WLC) 2106 to discover my new 3500 access points.I followed the example Cisco configuration doc.69719.I am using a Cisco 3760 switch to interconnect the AP and WLC.I set up DHCP in the switch. [code]

View 6 Replies View Related

Cisco Wireless :: WLC 2100 And LAP1131AG Are Disconnecting

Oct 10, 2010

Since few days the WLC 2100 series controller and 3x LAP1131AG are getting disconnected and the controller gets offline via the local ip address.  At that point I have to reboot. To get anywhere and after I connect wirelessly to the AP before I know it it disconnects.  It worked for 3 years straight no fuss. And now nothing. I reconfigured the WLC 10times and no diffference.  

[code]....

View 6 Replies View Related

Cisco Wireless :: To Join 1262 With Wlc 2100

Apr 1, 2012

I have a cisco AIR-LAP1262N-A-K9  and AIR-LAP1142N-A-K9, and i would like to join to Cisco WLC2106 (software version 7.0.98.0)My ap 1262N have 3 antennas externals with 7dbi of ganancy,Is possible to do it?

View 1 Replies View Related

Cisco :: Unable To Access GUI For 2100 Series WLC?

Sep 2, 2012

I have powered ON WLC(2100 Series) and connected LAN port from WLC to my PC. To access WLC GUI what is the factory default IP address?
 
I connected Console Port of WLC to Serial port of my PC. I have configured WLC as per the WLC quick guide.

Management Interface IP address :: 10.40.0.4
Management interface Net Mask: 255.255.255.0

[Code].....
 
The result is same even when below commands are used Configuration modeport adminmode all enablenetwork webmode enablenetwork secureweb enable 

View 12 Replies View Related

Cisco Wireless :: LAP1142 Cannot Join WLC 2100

Apr 2, 2013

I'd WLC 2100 series and 9 access point LAP1142N .8 LAP1142N can work fine and join a capwap controller is ok but only one LAP1142  is can not . Part of LAP  is AIR-LAP1142N-A-K9
  
Apr  2 10:52:42.284: LWAPP_CLIENT_EVENT: spamResolveStaticGateway  - gateway found
*Apr  2 10:52:42.284: LWAPP_CLIENT_EVENT: spamResolveStaticGateway  - gateway found
*Apr  2 10:52:42.284: LWAPP_CLIENT_EVENT: Dropping discovery in LWAPP. This AP model is not supported by LWAPP WLC.
*Apr  2 10:52:42.284:  status of voice_diag_test from WLC is false
*Apr  2 10:52:52.284: %CAPWAP-3-ERRORLOG: Go join a capwap controller

[code]....

View 4 Replies View Related

Cisco Wireless :: Recommendations For Implementing A Second WLC 2100?

Jan 3, 2013

We have two 2100 WLC's that support 12 access points. One has been sitting in a box for some time, but we're at the point where we need to add additional access points that will put us in excess of the 12 limitation. What is the best way to go for installing the second WLC?

View 2 Replies View Related

Cisco Wireless :: WLC 2100 Series DHCP

Sep 1, 2011

I have a problem with our WLC 2100 series (2125). Basycally internal DHCP server configured on WLC is not working. I have one AP connected to port no 7 (PoE) to bypass and eliminate problem with other equipment.
 
Port no 7 details:
 
IP Address: 192.168.30.10
Netmask: 255.255.255.0
Default router: 192.168.30.1
DHCP Server: 192.168.1.250(code)

View 14 Replies View Related

Cisco :: Can Import A Config From A 2100 Wlc Into A 5500 Wlc

Feb 14, 2012

I just got a new controller (5508).Is it wise to try to import my 2100 config into the new Hw our should I start from scratch?

View 4 Replies View Related

Cisco Wireless :: WLC 2100 Configured To Control Two AP

May 17, 2012

I have a fairly simple WLC 2100 configured to control two APs. We had a power outage a few days ago, and though the WLC was on a surge protector, it did not come back up properly after the outage. The STATUS light sticks at amber and I can't get any console response. At this point I'm not sure what to do except replace the WLC, though I'm loathed to do that as our budget was just cut substantially for next year and we're trying to turn nickels into pennies.

View 4 Replies View Related

Cisco :: Setting Up Wireless LAN Controller 2100?

Feb 7, 2011

I am having trouble on setting up a WLC2100 ver 7. we need to implement a private and public network. private network authenticate to IAS - RADIUS (windows server 2003 server) while the public network is open but when a client connect to AP it will redirect to a 3rd party web athentication - HotSpot Server. the challenge is we want to broadcast a single SSID.
 
senario:

1. when a user/guest connect to the AP a radius server will authenticate thru IAS - Radius.

2. when a user is authenticate via radius a dhcp server will give an ip address of the private network.

3. if the user is not authenticate a dhcp server will give the public ip address and netowrk traffic must go to a different VLAN.
 
my question is, is it possible to broadcast a single SSID for the two network? is there a document which is related to our scenario?

View 2 Replies View Related

Cisco Wireless :: Internal Temperature WLC 2100?

Dec 17, 2009

The operating temperature for 2100 wireless lan controllers is up to a miximum of 40 degrees celsius according to the datasheet. We deployed some 2112 controllers all displaing a temperature above 50 degrees celsiun. This during normal operation and deployed proper enviromet (aroco ...)

View 2 Replies View Related

How To Switch On Wireless On Compaq 2100

Oct 10, 2012

How to switch on wireless on Compaq 2100

View 1 Replies View Related

2100 - Killer Nic Dropping Connection On LAN

Mar 13, 2013

I have a Killer Nic 2100 installed on an 1155 setup under Windows 8. I can upload large files to anywhere on my home network .. but when I pull large files off of my main computer with the Killer Nic in it .. the connection drops out on my main rig... no network connection of any kind on my main rig until I reboot ..

I don't have this problem with the onboard nic ..

sometimes the network will drop when the power flutters .. all the other computers I have will have internet connection .. but my rig won't ..

View 15 Replies View Related

Cisco 2100 - Data Not Sending Or Receiving From Modem?

Oct 26, 2012

I'm using Cisco 2100 cable modem. It worked fine until some time later where the Data Send & Receive LED's stopped blinking. A man came to check if the cable was the problem by replacing it, but it wasn't. He claims it might be related to the laptop. I have tried several times restarting it. (I'm using mobile broadband) I would really like fast rather than slow internet ( I was limited so now it's slow but free)

View 14 Replies View Related

Cisco :: WebAuth Bundle Not Uploading 2100 Series

May 19, 2012

Recectly we replaced Cisco 2100 Series LAN controller to Cisco 5508 Wirless LAN controller , I downloaded WebAuth Bundle from my Old LAN Controller ,when i am trying to upload to my New Wireless LAN controller ,its not uploading and also it gave me uploading failure error message .

View 2 Replies View Related

Cisco :: 2100 Can Create A Guest User Directly On ISE

Oct 10, 2011

I have an instance of ISE and NCS with a WLC 2100 plus a couple of LWAPs. This is an evaluation POC lab to sell ISE and NCS to our management to make our life easier.The problem I have amoungst many is I can create a guest user directly on the ISE and the guest can login, the ISE monitor shows the guest authenticates but the clients webpage passes them back to the login page not onto the original client url. The web auth is pointed at the ISE/guestportal/portal.jsp page.If I point the web auth at the internal WLC page using a WLC local user account it works.If I set the guest access to pass through it works without issues getting dhcp and dns. On the ISE is there a policy needed to say if guests are web authenticated give them access? The need is for AD authenticated users to be able tocreate guest users. The AD authentication works for sponsorship and guest creation its just the guest access redirection I am having issues with.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved