Cisco :: Could Not Ping My Laptop Or The Printers From The Print Server?
Jun 19, 2012
We have a new building coming online. It is a layer 3 connection (OSPF) between our core and this building. I have a handful of VLANs configured at this building (using VTP) and I'm having a problem with only 1 of them (the printer VLAN).From the print server (a virtual machine who's host is directly attached to our core switch - a Cisco 6509), I can NOT ping any of the printers at the remote building. But I can ping the gateway for that vlan (which is on the L3 switch/router for the building - a Cisco 3750X).However, if I put a laptop on that vlan at the building, I can ping the print server as well as the other printers.
I ran a traceroute from the print server to the printer's IP address and after hitting the building's router, the requests just started timing out.
I double, triple, and quadruple checked the laptop and printer configurations. In my troubleshooting,I even created a DHCP scope and added the ip helper-address to the interface vlan. My laptop, connected to a switchport on that vlan received the IP address, DNS server info, etc. from the DHCP server (which is on the same vlan as the print server). From my laptop, I could get to all of our internal web servers. I configured the firewall to allow that IP range internet access, and had full internet access on my laptop.But still, I could not ping my laptop or the printers from the print server.
No change in the traceroute.
I then created a vlan interface on the access layer switch (a stack of Cisco 2690Ss) that the printers and my laptop were connected to.From the print server I *could* successfully ping that vlan interface.Traceroute went right to it (3 hops from print server - core switch, router at building, vlan interface on distribution switch).But I could still not ping the laptop or any printers from the print server.
I even wiped out all config related to this vlan - the vlan interfaces on the distribution switch and the L3 switch, deleted the vlan itself, the router network statement, etc. Then rebuilt it all over again.Same results. I've compared every line of config for this vlan to other vlans where this problem is NOT occurring and can find no difference.
View 6 Replies
ADVERTISEMENT
Aug 3, 2011
I have several networked printers in my office. Two users stopped being able to print today to any of the networked printers. Everything else works fine. I have tried everything I can think of
View 1 Replies
View Related
Jun 15, 2012
My laptop connects wirelessly via router to RoadRunner/internet and work well.I want to physically (ethernet) connect my laptop (via it's docking station) to a print server and then in turn to a printer."link" light is on, on print server however "pinging" 192.168.0.10 (factory default) fails.
View 9 Replies
View Related
Feb 14, 2012
In the office we have 3 printers (2 network 1 attached locally to my machine). I can ping all of the printers and no packets are dropped, however I cannot connect to them.I know the printers arent faulty because all of the other staff have no problems printing.I have tried re-installing drivers, disconnecting the printer and reconnecting it etc. and I just cant find what the problem is
View 4 Replies
View Related
Feb 28, 2012
I use a Buffalo Nas LinkStation WXL server to back up my files and data. It has been working perfectly and we have saved some files and data in it.However, we turned it on one day and it had disappeared from the list of Computers on the network and for a while now we haven't been able to get in. It is not showing in the list of Computers in Network and its webpage keeps coming back as "Unable to Connect" or "Taking to Long to Respond".The server is visible on the router's webpage under DHCP Clients List and we can ping the server and get a reply. But none of the laptops on the network can view it neither can I (the administrator) get access to it via its webpage?
View 1 Replies
View Related
Mar 2, 2011
My Dell laptop cannot see any of my printers on my network. I recently installed a new Linksys 160N Router and created a new network on my desktop which runs Windows 7. These are the three computers I have:
HP Desktop - Windows 7
Dell Inspirion 600m Laptop - Windows XP
Compaq Desktop - Windows NT
Prior to installing the new router, all computers could see each other on the network.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 2, 32 bit
Processor: Intel(R) Pentium(R) M processor 1.60GHz, x86 Family 6 Model 13 Stepping 6
Processor Count: 1
RAM: 1023 Mb
Graphics Card: ATI MOBILITY RADEON 9000, 32 Mb
Hard Drives: C: Total - 72794 MB, Free - 48125 MB;
Motherboard: Dell Computer Corporation, 0X8957, , .D1XM981.CN4864358I4849.
Antivirus: Norton 360, Updated: Yes, On-Demand Scanner: Enabled
View 3 Replies
View Related
Sep 5, 2012
I have walked into a company that has several small (1-4 PC's each) remote locations, and they all connect to Terminal Server to use our POS app. This app will not keep redirected printers saved between each session, so in order to save the printers, they have software VPN's set up on each client, then the local printers are installed on the server through a Local Port using the VPN ipaddressprinter share name. This allows the printers to be saved in the program and not re-assigned each session. Now, let's say that I have implemented a new desktop replacement procedure, and we are now in phase one of said procedure. I have purchased Windows 7 64-bit desktops. After setting up my deployment standards and testing in-house, I placed one of these PC's in the field. This is where I learned the issues of printing from a 32-bit server to a 64-bit client. I have not been able to successfully print to the printer installed on the server using the Local Port of the client, print job errors out. I have done some research, and found the issues with printing from 32-bit to 64-bit, and have installed all the additional drivers I can find, with no success.
View 1 Replies
View Related
Sep 11, 2011
Here is what we are trying to do: (server names have been changed to protect the innocent, etc.)3 servers at 3 different locations - all running Server 2008 R2 and all on the same domain
setup:
server01 (has the print server role and printers are shared out)
server02 (has the print server role and printers are shared out)
terminal_server (a terminal server)
We have printers on server01 and on server02 that we need to install on terminal_server.The printers install just fine onto terminal_server from server01 when browsing and connecting or opening the shared printers.
The printers on server02 give thes error message when trying to connect to or open them from terminal_server:"The operation could not be completed (error 0x00000709). Double check and make sure that the printer is connected to the network."However, the printers from server02 will install and work just fine IF I install them as IP printers.
View 6 Replies
View Related
Jul 20, 2011
this printer is connected to our schools network...in the lab I'm in, we have different subnet and my tech computer and the lab pcs gets dhcp from router connected to same new network switch as printer. I can ping the printer and pull up menu in browser but cannot print.
View 6 Replies
View Related
Feb 8, 2012
I have an annoying problem with networked printers disconnecting/disappearing when TS users logoff. Current configuration is: SQL server (WinSvr 2K8 R2 Std) has printers installed on it (standard TCP/IP Port) and printer is shared, there are also some printers installed on the DNS server and a couple of satellite offices. Users connect to TS servers (WinSvr 2K8 R2 & WinSvr 2K3) printers are connected and work fine until they logoff, when they log on the printers are gone "sometimes some printers are still there!?" I have tried logging onto the server as domain administrator and connecting printers but they won't even stay for administrator (have had this with win7 client machines) and tried directly 'console' at the server. I have looked at the printers on the SQL server and sharing properties, it is stoping printers from coming back at login on TS Note that local (client machines) connecting to the same shared printer from the SQL server don�t have the problem it's just on the TS server.
View 2 Replies
View Related
May 18, 2011
I have a laser printer that's connected to a desktop running Win 7. The printer is set to SHARE. I got a laptop that I want to print from through the desktop. Is this possible? The printer is not wireless and I don't have a print server. I have wireless network running on my Linksys router, but the desktop and the printer are not on it.I have the desktop and laptop on the same WORKGROUP, but when I try to add the printer on the laptop by selecting a NETWORKED PRINTER option, I get an error.
View 2 Replies
View Related
Jul 19, 2011
My environment has a Cisco 3560G switch which does DHCP with a VLAN for wireless clients, connected to this switch is a Cisco WLC4402 to manage all wireless access points which are Cisco 1130 and 1140 series. We recently purchased an HP LaserJet pro CP1525nw color printer which we have connected with an Ethernet cable to the Cisco switch on a port in the same VLAN as the wireless clients. The printer will pick up a valid IP address from the switch and if I connect a laptop with an Ethernet cable to the switch I can ping the IP of the printer and print to it once I install the driver, if I unplug the laptop from the switch and go over the wireless my laptop gets an IP in the same range as the printer and I can ping the printer IP address as well as open the web interface for the printer but cannot print, once I open the print queue on my laptop I see error printing and nothing prints out. I always add the printer as an IP port and supply the IP address when I install the driver to test. I have also gone through the manual for the WLC4402 but did not find anything for printing. There has to be a setting on the controller that is preventing me from printing but I don't know what it could be. On the laptop I use to test I also installed LPR and LPD and I even tried using another printer that I know works fine in its place and still could not print, so I don't think it's the printer.
View 2 Replies
View Related
Apr 11, 2012
I have a CanonPIXMA iP4000 printer connected to my 64bit VISTA PC via a USB cable. My XP laptop is connected via a Router to the PC. I cannot share my printer between the two. My Laptop says that the drivers are,nt loaded, even though they are installed. I used to be able to share the printer before, until I had a virus on the laptop, and I had the operarating system deleted and then installed.
View 4 Replies
View Related
Mar 8, 2011
They've been networked together for over a year now,but all of a sudden,I can't get the printer to print from the laptop,but it still prints from the desktop. I re did the network wizard on both computers,and the add a printer step, but it didn't work. I also re installed the printer drivers on the laptop,but again it didn't work. When i click on the print icon,it acts like it's going to print,but I get "Printer not responding" and " Document failed to print" messages. The desktop is running Windows XP Home SP3,and the laptop is running Windows XP Professional SP3. The router is a Netgear WNR1000.
View 7 Replies
View Related
Mar 1, 2012
You are responsible for managing and configuring printers and print servers for your organization. You must determine what you can do to increase the performance of your print servers responding to client print requests. What options are likely to improve print server performance?
View 4 Replies
View Related
Dec 3, 2011
Some time our office network will block by print server, when i close it our network work properly, why it is happening and how it will solve ?
View 4 Replies
View Related
Jan 16, 2012
How can I get my laptop to print into my home printer.Laptop 1 is now located somewhere (not at home) and connected to the internet wirelessly through a building's free wifi.I have Laptop 2 at home. I'm using Laptop 2 to remote control Laptop 1 using Team Viewer 7. I tried to print into the home printer from Laptop 1, but an error message pop up saying Printer is offline.If Laptop 1 is at home it can print to the home printer, no problem. So, how can I get Laptop 1 to print remotely from its current location to the home printer using Laptop 2 as my way of remote controlling Laptop 1? The printer device is already installed in Laptop 1.
View 4 Replies
View Related
Sep 30, 2011
I have a dell laptop and i want to print wirelessly to my HP Photosmart C4795 printer.i have my wireless set up through a verizon westell modem router. my wireless is setup i can get on the internet on my laptop and use my ipod in the house through it. when i'm using my laptop i would like to print wirelessly without have to go in the other room and use the desktop which is connected to the printer.
View 4 Replies
View Related
Sep 20, 2011
I tried several approaches to enable my laptop to print from my PC Installed printer burt without success. The computers are connected via Wifi and both use Windows 7 operating systems.
View 2 Replies
View Related
Jan 2, 2013
I recently purchased an Epson XP-205 Wi-Fi printer, and I set it up on my network and installed the drivers to my laptop, initially I could print over the network, but since a restart I can't. I have tried an uninstall and reinstall of the printer, but to no avail and if it matters, I'm running W7 64-bit.
I've ensured the printing programs are part of my firewall exclusion rules, and I can access the printers set up page via 192.168.1.3, also as expected, the printer is "pingable". On top of this my Android tablet is able to send things to the printer, so I'm sure it is an issue with my laptop.
View 1 Replies
View Related
Dec 28, 2012
We are looking for a print server that saves prints to a hardrive when printed from anywhere on a network.What is meant by saves prints meaning that they can be accessed anytime during the future for reference and security reason
View 1 Replies
View Related
Oct 10, 2011
I have a NG PS121V2 print server that i had working on my cradle point MBR 900 with a lexmark E238 I lost the MBR 900 during a storm so i picked up a Belkin N300 until i decide what to do about ISP.I can not get the NG Print Server to now. when i go through the setup wizard for the Print server i can configure and print a test page but as soon as i exit the setup wizard i can no longer print? e)
View 1 Replies
View Related
Feb 25, 2011
I have a trendnet TEW-P1UG when I connect to it by wireless and I am able to click the test printer on the ip page, but I cant just print things?am I meant to link to the print server from my router? or from my pc that I wish to print from?
View 16 Replies
View Related
Jan 9, 2011
using a linksys psus4 printserver with windows 7?
View 5 Replies
View Related
Aug 12, 2011
can i print as am joint to a domain.
View 2 Replies
View Related
Sep 27, 2011
I am using Tplink TL-WR940N wireless router and recently attached the TPLINK PS110P paralell print server with it. I run the installation wizard on my Windows 7 System. But my router doesnt detect print server...
View 5 Replies
View Related
Jun 28, 2011
Configured a DP-G310 Print Server to work with the DIR 655? I have upgraded the firmware so I have WPA Security. I have typed in the WPA key in the DP-G310 setup. The DIR 655 sees the DP-G310 but it won't assign it an IP address. I can see the DP-G310 MAC address in the DIR 655 wireless status page but the IP is 0.0.0.0 and it disappears and reappears in the wireless connections list.
View 3 Replies
View Related
May 16, 2011
my printer connect wit desktop,pc is connect to router for net.. is it possible to take print out through laptop without conect any wire connection to printer???
View 1 Replies
View Related
Jan 19, 2012
I've been trying to install our rwireless Hp printer on my laptop. I've had it installed and working, but then it goes offline and won't print. I've uninstalled and reinstalled to no avail. Now it has the error symbol on it (yellow circle withan exclamation mark)
View 4 Replies
View Related
Jan 26, 2012
I installed window server 2003 in a old Pentium III server as a standalone test server. Now I want to use it as a print server and connected it to the domain. I can ping workstations and other servers from that test svr. But i cannot ping that test server from the work stations.
View 2 Replies
View Related
Mar 20, 2013
We have:
Print server: TROY PocketPro 100s(Ethernet)
Cisco cat 2960
Cisco 2911
Config Cisco 2911
mac address of print server logged in dhcp pool
i can connect print server with home assus router.he is get dhcp options correctly.
!
! Last configuration change at 18:13:02 Moscow Thu Sep 20 2012 by root
version 15.1
service timestamps debug datetime msec
[Code].....
View 2 Replies
View Related
May 18, 2011
I have got a bluetooth print server (Nortek, BT 500). The user manual doesn't contain pairing code. (The serial number or the MAC address doesn't work! The manufacturer's WEB page also doesn't work: [URL] ) I've tried the following codes:
BT500
NORTEK
1A
N44066-00054 (serial number)
[code]....
View 2 Replies
View Related
Mar 19, 2012
i don't know the ip address of my DP-301p+ print server. how can i reset it to default ip address
View 1 Replies
View Related
