Cisco :: Discovery ASA Firewalls In LMS 4.0

Feb 16, 2012

I have a problem discovering some ASA firewalls on a network. I have several ASA firewalls on this /24 network, but some of them I can't discover e.g 149.x.x.107 is discovered ok, but 149.x.x.20 I can't discover. It seems that it's not even trying to discover the devices I have problems with. Nothing is shown in the discovery log.

View 11 Replies


ADVERTISEMENT

Cisco Firewall :: 5510 / Adding AIP Firewalls To Existing CSC Firewalls Setup?

Mar 3, 2011

I have a customer with active/standby on a pair of 5510's with the CSC modules. They were inquiring about the AIP/ASA, and since this would NOT work in their current setup, would getting a pair of 5510/AIP configured for transparent failover work placed in front fo the existing units? Would I need to have a switch placed between the AIP and CSC ASA's?  Or would I setup the ASA's for context based Active/Active failover to interconnect the ASA's to the existing units, but I still see a need for a switch.

View 1 Replies View Related

Cisco :: ASA 5505 / WCS Discovery Over VPN?

Jan 15, 2012

I am having trouble getting 1142 LAP to find the controller. We are running an ASA 5505 at our main campus where the 5508 is located. Each Of our distribution centers have a PIX501 and from there about 3-5 AP's each. The AP's that were primmed before instalation work great, however we need the ability to get the other ones that were already installed and not finding controller to work with out cycling them through main campus. I have opened up UDP ports 12222-12223 and 5246-5246 with no luck.

View 1 Replies View Related

Cisco :: CSM 4.2 RA VPN Policy Discovery?

Nov 29, 2011

we're evaulating the Cisco SM 4.2. After adding my ASA 5520 the Policies are discovered from the device except the RA VPN Policies.I tried to trigger the discovery process manually and i got this errormessage Please verify the device "IP address", "hostname", "domain name" and "port number" are correct, there is network connectivity between the CS Manager server and the device, and the device is configured to accept https connections, the device is running, and then retry this operation.which i don't understand because the other policies were retrieved just fine.

View 0 Replies View Related

Cisco :: LMS 4.2 / W2K8 R2 - Discovery Not Working

Jul 12, 2012

LMS 4.2, W2K8 R2.I was having an issue with discovery adding devices to with corrupt information (seemingly random strings of characters in several fields).  While I was trying to clean this up a scheduled discovery kicked off and further exacerbated the issues I was having.  Frustrated, I deleted all entries from the discovery schedule until I could get things cleaned up.
 
Now I want to go back and troubleshoot the discovery process.  Trouble is, I can't get discovery to do anything anymore.  I disabled all modules but CDP.  I added a single seed IP address under the CDP configuration.  This is the address of a 3560V2 switch that is not in DCR.  When I started discovery it completed in about 2 seconds and didn't discover anything, including the seed device.  So I added another 3560V2 as a seed device under global settings.  Same results.  Thinking that it had been working using scheduled discovery, I set up a schedule and kicked it off that way.  Same results.  Finally I added one of these seed devices to DCR and let LMS fully learn about it.  Ran another discovery. Still no joy.
 
I started an SNMP debug on the seed devices before starting discovery.  I see the SNMP get coming from LMS, the switches respond and the discovery completes with 0 devices discovered.CS Discovery.log contains no meaningful information.  Only messages about "No appenders could be found for logger".

View 1 Replies View Related

Cisco :: LMS / Prime 4.1 - No Discovery Of WS-X4712-SFP+E

Dec 4, 2011

my customer is using Cisco Prime 4.1 as an Upgrade from LMS 4.0 and has made a discovery of a new added Cat 4506E with a Sup 7E and Modules.All the devices have been discovered, excepted the module WS-X4712-SFP+E.Is this card not supported yet ?I could not find any detailled and actual information about the support or not of this module, or about the conditions for the Module support it in Prime 4.1..How ist it possible to proceed to having this module discovered ?

View 1 Replies View Related

Cisco :: LMS 4.0.1 Devices Not Added To DCR After Discovery?

May 30, 2011

We have just installed LMS 4.0.1 and started to discover parts of the network. After the discovery process finished successfully -  100+ new devices were added to DCR message - I was able to see the devices by clicking on their number but when I go to Inventory-Add/Import/Manage Devices I cannot see any device in the Group that I created.If I restart the CiscoWorks Daemon Manager process the newly discovered devices are added to the custom Group. This seems like a bug as I had a LMS 4.0 evaluation installation a few months ago and device discovery was working fine meaning the devices were added immediately to the Inventory.

View 4 Replies View Related

Cisco :: LMS 4.0 Reached Discovery For Devices

Jul 30, 2011

i am installing a CWLMS 4.0 and everything was good until i have reached the discovery for the devices, i am dealing with a bank setup and the branches is connected using layer 3 MPLS, branches are located behind the ISP router, so as a cdp neighbor i cant see anything but the ISP router  at my Core.
 
so i cant see the branches routers as neighbors to my (seed Device) Core, and i have tried to use the ping sweep and i could not reach them also. and also to add them manually as we were doing before in the earlier versions of CWLMS, using the Devices and Credintials, this option is removed from the LMS 4.0 as i have red in a document.
 
 1- snmp is configured on all devices.
2- access-list is configured on all devices.
3- i am able to reach the LAN Devices without any problems and the configuration is the same on all of the devices.

View 1 Replies View Related

Cisco :: Ping Sweep And Discovery In LMS 4.1

Jan 18, 2012

We are running CiscoPrime LMS 4.1 and I have a problem with PingSweep in Device Discovery. Our company's branches connect to the main site through GETVPN. Discovery through CDP, Routing Table and ARP cannot be used based on the document written by Joseph Clarke [URL] and which is extremely useful. So the only available option is PingSweep.
 
The loopback interfaces of all the remote GETVPN devices are in the same IP range, so this was configured in Module Settings --> Ping Sweep in the Discovery.
 
Unfortunately none of the devices get discovered, even though there is icmp connectivity from the server to the loopbacks.

View 1 Replies View Related

Cisco :: LMS 3.2 - How To Disable Discovery Settings

Aug 30, 2011

I am using lms 3.2.where I have added devices manually.Because discovery settings the device are taking some random ip updating the display and hostname.
 
I want to disable the full discovery settings..

View 3 Replies View Related

Cisco :: Device Discovery In Prime LMS 4.1

Sep 8, 2011

I am using CISCO PRIME LMS 4.1 for manage my network, i ran a device discovery job using a ping sweep on the ip ranges of my network, ie 192.168.1.0/24, 192.168.2.0/24 and so on... the discovery found all my devices, but it discovered duplicate devices with illegal ip Addresses, i.e.,
 
ip                                    device    
192.168.1.255               S1
192.168.2.0                    S1
192.168.2.1                    S1 (the real address)
 
all in reachable status.
 
I don't understand why the program adds that repeated illegal addresses.. How can I run the device discovery to avoid this problem?

View 2 Replies View Related

How To Turn On Network Discovery

Feb 4, 2011

my system's network discovery is always off even when i try to put it on again it goes back off immediately...can it be related to the firewall settings or wat else can be preventing it from coming on?

View 3 Replies View Related

Cisco :: Prime Infrastructure 1.3 Discovery Job Won't Stop

Feb 27, 2013

I have just installed prime 1.3 (brand new install), we have started a discovery job to find one switch (IP address), this job has so far come up with 311 credential failures and appears to be going through every 127.0.0.x IP address it can.Is there a way of stopping this job from running. Clicking on the Red X next to the name has no effect.

View 0 Replies View Related

Cisco WAN :: Does C6509 Support Ip Tcp Path-mtu-discovery

Mar 5, 2012

I have one questions regarding if C6509 suports "ip tcp path-mtu-discovery" ? apply this command to GRE interface on C6509?
if yes, let me know what is the the IOS for that.

View 2 Replies View Related

Cisco :: SNMP Discovery Of Clients Through WLC 2112

Jan 4, 2012

I have a client with a 2112 WLC and 1252AG radios. The clients work fine, but an SNMP management server can not reach any of the clients over the wireless. Before the WLC and new AP's were installed, they were running older Cisco Autonomous AP's and had no problems with SNMP.  My monitoring system uses SNMP and it can reach the WLC just fine, so there doesnt appear to be any issues on the switched network. What can be blocking the SNMP on the WLC?

View 4 Replies View Related

Cisco :: WLC 5508 Discovery In Prime Infrastructure

May 20, 2013

I have newly deployed a Prime Infrastructure (PI) in my network, and i want to add my wirless controller in it. I get an error SNMP time out whenever i add my controller to PI through SNMP.
 
There are default SNMP configurations in the controller and i am simply adding them in PI with their private/public SNMP string.
 
WLC 5508 is connected to my core switch and PI is connected to another switch which is directly connected to core switch via Layer 3.
 
Is there any configuration required to be done on the switch side.?                  

View 2 Replies View Related

Cisco :: Difference Between Custom And Standard Discovery In LMS 4.2

Oct 22, 2012

whats the difference between custom and standard discovery? There´s a line on the help page: "The Use Policy Configuration Settings  radio button will be enabled only after adding a Default Credential Set  Policy."The radio button is not enabled although I´ve  two default credential sets and two default credential sets policy configuration.

View 1 Replies View Related

Cisco :: LMS 4.2 / Discovery Based On Specific IP Address?

Nov 27, 2012

1)is there any methods to let LMS 4.2 discover Cisco devices based on specific ip like Loopback address ? coz in my Cisco devices i have more than ip address configured?

View 4 Replies View Related

Cisco :: LMS 4.1 / Device Discovery Not Working Correctly

Jan 18, 2012

we are running CiscoPrime LMS 4.1 and I have the following problem.I have configured SNMP Settings as shown below (the order of the targets is exactly as it is configured on the server):As can be seen we use three different read community strings. I also have exluded a bunch of IP ranges and IPs from the filter settings. When I manually start discovery everything works fine, meaning that all devices in the above ranges that need to be discovered are discovered as "reachable". The problem appears in the scheduled discovery (happens once daily). In that case only the devices with Read Community snmp1, get discovered as "reachable". All other devices with Read community snmp2 & snmp3, as well as those that are excluded in the filter settings, are discovered as "unreachable".The discovery uses DCR as seed and seed devices are also configured.I also have a problem with PingSweep in the discovery, but I will open another discussion so that I don't complicate this one too much.

View 1 Replies View Related

Cisco :: LMS 4.2 Cannot Enable End Host Discovery On Trunk

Mar 2, 2013

I have noticed that our LMS does not collect any information about wireless users connected to autonomous access points, although I can see the mac address of the wireless users on the switch (2960) Trunk port connecting to the AP via CLI. I can also get the IP address from the core switch. Even after selecting 'Perform Data Collection' on the AP in the topology, the Wireless End hosts report remains blank.
 
I am trying to enable the option 'End host Discovery on Selected Trunks' in the 'Acquisition configuration in Trunk' menu and after selecting the switch where the AP resides and clicking 'show Trunk' I get the message 'there are no trunks in the device(s) selected', although there are several trunk ports on this switch, other than the one connecting to the AP. The switch and the AP are managed by LMS. We are facing this problem with all Autonomus APs. We do not use WLSE. Is there something missing to discover these Wireless hosts ?

View 1 Replies View Related

Cisco :: Configure Device Discovery In LMS 4.0 Works

Aug 1, 2011

I´m getting started on ciscoworks and i trying to configure a device discovery to start but i have some questions about how configure this tool exist 5 parameters that i have to configure to start the device discovery.
 
•Configuring Discovery Module Settings
#
•Configuring Seed Device Settings

[Code]....

I want to add devices that found neighbors via  CDP son in the configuring discovery module setting i choice that option In the configuring seed device setting i choose DCR as seed device that means those devices already in the DCR start discovering from those devices but you can add more seed devices how i can add a seed device ? with ip addres or something like this? and this device have to be in the DCR already or not? The configuring SNMP settings, this community correspond to what device? the devices that i want to add ? and in the field target name what ip adders have to be? and if i have different community of snmp in my devices what device and snmp community have to configure in this parameter

View 1 Replies View Related

Cisco :: Call Manager Server 8.6 In LMS 4.1 Discovery

Jul 30, 2012

I setup one network where LMS is in subnet 192.168.5.0/24 and CUCM is in subnet 192.168.1.0/24. both are reachabe to each other and  both are also in different EVN/VRF. when i try to discover the CUCM from LMS 4.1. It discover only routers and switches. I am unable to find any CUCM 8.6 server, i did the snmp read community setting in call manager under serviceability.
 
In addition, IP phones are appeared as END host not as IP Phones. (find attached image)

View 6 Replies View Related

Unable To Turn On Network Discovery?

Aug 22, 2011

Whenever I select it and apply changes, then reopen, it has reverted back to the off position. I have removed all firewalls and software that could interact with it (disconnected it from the network whilst in this state). I have set the correct services to automatic as they should be. It is getting rather frustrating not being able to share my media across the home network. I can see and utilise other computers media but none can utilise said computers media

View 1 Replies View Related

PXE-E76 Bad Or Missing Multicast Discovery Address

Jan 30, 2013

I've installed a Windows Server 2008 R2 Enterprise Edition with ADDS, DNS and DHCP server.Everything is configured correctly and running fine when I use an independent network.When I uninstall the DHCP on the server and connect it to my primary network with a Linux router (ClearOS) handling DHCP i get an error message on the client computer when trying to boot with PXE."PXE-E76: Bad or missing multicast discovery address".What do I need to do to make this work with my Linux router? Some port that has to be forwarded internally from the router to the WDS server?

View 5 Replies View Related

Cisco :: LMS 3.2 - Common Services Device Management / Discovery?

Jun 20, 2011

I use the Edit Identity option to change the "Display Name" from an IP to a station name, it is overwritten when a discovery has been done. I have checked the discovery settings and tried using the update DCR Display name setting to prevent this from happening, but it makes no difference.Is there something i am missing? This is on LMS 3.2?

View 2 Replies View Related

Cisco :: Can Prime Infrastructure P1.3 Provide Topology Self-discovery

Jun 1, 2013

I wonder if PI 1.3 can draw the topology of the devices which is discovered by prime automatically, or if i can draw it by myself in Prime?

View 4 Replies View Related

Cisco :: C3560C Could Not Find The Fault Discovery For 3 Switches

Jul 28, 2012

We are running LMS 4.1 and we have more than 150 devices.LMS could not find the fault discovery for 3 switches with partnumber WS-C3560C-12PC-S. This switches are considered as unknown.Ios version is c3560c405-universalk9-mz.122-55.EX3.bin But other things are ok. Inventory Collection ,Config Archive,  Topology Data Collection etc .  Is there any way to fix ths issue? We have compact switch WS-C3560CG-8PC-S, which is working perfectly for all  features.

View 4 Replies View Related

Cisco Firewall :: 5520 Re-assign Policy Without Having To Do New Discovery

Sep 27, 2012

I recently upgraded the ios image and the asdm on a cisco 5520 firewall.  I use a policy on a cisco security manager to push policys out to this firewall.  But it cant push to them now because the image has changed on the device.Is their anyway to re - assign the policy without having to do a new discovery.

View 2 Replies View Related

Cisco :: 6509 - LMS 3.2 CM Device Discovery Multiple Interfaces

Apr 2, 2012

we use LMS 3.2 in our network. We have a couple of 6509-V-E Switches with mutiple interfaces (VLAN interfaces and Layer 3 interfaces) The problem is, campus manager discovers the switch by a interface randomly...one time its a lay3 Interface and another one its a vlan interface which none of them are in DNS hence no name resolution can be made.

Is there a way to "tell" CM to us for instance the VLAN Management IP of the switch?

View 2 Replies View Related

Cisco Application :: Discovery Protocol On ACE 4710 Appliance

May 26, 2011

My TCOM guys say they do not see the ACE as a CDP neighbor on their switches. Is CDP enabled by default? I cannot find any documentation that suggests this is configuration (like on the Cisco CSS - where it can be enabled, but cannot see its' CDP neighbors).
 
BTW - The ACE 4710 Appliance documentation uses CDP as acronym for Certificate Revocation List Discovery Point (for SSL CRL's).

View 2 Replies View Related

Cisco :: DCNM V5.2(2) / S104 Discovery For 6500s Very Slow

Jan 2, 2012

It's been discovering a 6513 for over 90 minutes. Is this an expected duration or is something likely malfunctioning or is it just the sheer # of interfaces that it must process? The Nexus 5k's that it has discovered progressed fairly quickly.

View 1 Replies View Related

Cisco :: 1500 LMS4 Manual Device Discovery

Nov 7, 2011

I have a very special usecase with migrating devices from LMSv2.6 to v4.1 using DCR bulk import that was maintained manualy, not by discovering.The special thing is each device has its own SNMP-community and its about 1500 devices.RME discovery works fine, but I get the devices not discovered by DCR (CSDiscovery), because I need a minimal DCR discovery configration containing Seed and SNMP-settings. So I activated DCR as seed, but cant skip SNMP settings without an entry. But in this case I would need 1500 SNMP-lines that would be very unhandy. is in CSDiscovery-Settings a possibility to can leave SNMP settings untouched so it takes the credentials from the DCR, to can start DCR discovery?

View 6 Replies View Related

Cisco :: LMS 4.1 Device Discovery Will Not Start When Launched Manually

Apr 19, 2012

I have problem in recently installed LMS 4.1 Device discovery will not start when launched manually. When i hit the button, it doesn't even give a popup window saying that the discovery is started and that email will be sent... If I schedule it is launched, runs and finishes correctly. All proceses are started and it seems that application is working ok. LMS is installed on Win 2008 R2.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved