Cisco Firewall :: ASA 5510 No 3des Free License Installed
Sep 12, 2012
I have Asa 5510 with base license and no 3des free license installed on to it.Will it be required for both the licenses to be installed on it for site to site tunnels to establish.This firewall is not taking the below commands to give and the tunnel is not getting through.tunnel-group x.x.x.x type ipsec-l2ltunnel-group x.x.x.x ipsec-attributes.
I'm currently reconfiguring an ASA5510 installation to a HA setup with a second 5510. The old 5510 has an "AnyConnect for Mobile" license which isn't being used. So we upgrade that one to a SecPlus License to enable failover posibilities and we bought a new 5510 also with a SecPlus license. When I'm trying to enable failover I get the message that my mate hasn't got the "AnyConnect for Mobile" license. I know for failover both devices must be exactly the same (at first i thougth that the AnyConnect license would be lost when upgrading to SecPlus). So now I'm wondering and searching for solutions to remove the AnyConnect license (because we don't use it).
I found my CSC module installed in ASA 5510 unresponsive. I tried to recover / re-image the module with .bin file. but I think it is not possible to re-image because there is no rechability with CSC module, and session 1 command also doesn't work,
you can see the response here.
CS-ASA# session 1
Opening command session with slot 1.
Card in slot 1 did not respond to session request.
In this case how to enter into the module?
I removed and inserted the module and tried to reach to it .. but couldnt solve . I just wanted to know whether hardware is dead or not.
I am quite new to firewall, in my company one asa 5510 firewall is there.I configured inside, outside, dns, dhcp and nating.I need to config bandwidth limit (1Mbps) for inside port and I restruct like facebook, youtube and pornsites..And I heard that some subscription is required, really is it required?
I have a two ASA HA and I'd like to upgrade the license to ASA5500-SSL-250. I need to know if i have to purchase one license (ASA5500-SSL-250) for the Active unit and one license (ASA5500-SSL-250) for the standby unit.
1) Will I be able to update firmware (from 8.2 to 8.3 or higher for example) without smarnet for ASA 5510? And what can not I do without smartnet? 2) I have only AIP-SSM-10 module to this asa 5510. is there a smartnet for it, too? And when I buy only module is there build in a 1 year subscription for IPS signatures? 3) If I have Cisco ASA 5510 base license, will my IPS on AIP-SSM-10 work? 4) Also I'm planning in a year buy one more 5510 with same module and put ther in failover. Will I really need Security Plus license for failover (Active/Standby)? For Active/Active I know that I need one, yes?
I have a problem with ASA5510 CSC10 license renewing. Initially, we had CSC license with 500 seats, and renewed it to 250 seats. After that every time it shows that license expires day before today.(for example if today is 4 April it show that license expires on 3 April).
Clicking on "Check Status Online" didn't work. What can correct this problem ?
I am looking for redundant asa deployment for fail over set up . however both units have csc cards. does this product ASA5510-CSC10-K9 has license for fail over ? what's the part no for asa failover license ?
How to enable the VPN-3DES-AES and another ASA Box.Mate's license (VPN-3DES-AES Enabled) is not compatible with my license (VPN-3DES-AES Disabled). Failover will be disabled.The license on secondary is not compatible for secondary ASA for the failover. [code]
I have a PIX 515E UR which I would like to activate the VPN-3DES-AES license. I did find a link to register the license, but after following the link and logging into my old CCO account i found that as I didn't have access to anything, so couldn't complete the procedure.Is there any way that I can get the license activated? I bought the unit from a Cisco partner quite some time ago, but never needed the 3DES license. Now I do.
I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
i saw part number ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
I have a ASA 5510 with Security Plus License and when I looked at the devices a few days ago I had 2 contexts, however after configuring the Mgm port as a regular port the contexts show 0, why? I can not find any post on the internet where this issue has happen: here is the output from show ver:
Cisco Adaptive Security Appliance Software Version 7.0(8) Compiled on Sat 31-May-08 23:48 by builders System image file is "disk0:/asa708-k8.bin"
I have a Catalyst 3750X and 3750G configured in a stack. I need to break up the stack for failover reasons. My question is how do you determine what license's is on each of the switches. From the below print out. I assume the 3750X has the ip base license and the 3750G has the ipservices license. Is there a command that clearly shows which license's is installed on each switch in the stack? [code]
I have to upgrade to an ASA 5510 CSC, and the new license is generated, the file you sent me licensing, only seen this:Activation Code not required for this renewal. Please go to "Administration> Product License" in the CSC SSM console and click "Check Status Online" to get the latest expiration date (BASE: 09/04/2014, PLUS: 09/04/2014).This means that what I have not make any upgrades or license charge in the ASA? Does the automatic update is made?
What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
you can update your ios for free within the 90 day warranty.e.g. a customer bought a asa 5510 and installed was a old version of the ios. now our customer complains that he wants to have the current version.but as far as i know he would need a smartnet in order to get the current ios.
but i think to remember that someone told me that you can update your ios device withthin the 90 day warranty. true?
I activated the following Cisco AnyConnect License on my Cisco ASA 5510 running the software version 8.3(2):webvpn has been configured on my ASA, but everytime I try to connect from a Window system (xp, 7 or 8), the process always stops at the menu "Download" (as seen on the image below). My goal is to connect via web-based without doing any manual installation of the Cisco AnyConnect VPN Client on my system.
we have ASA 5510 with IPS and base license. Now we need Anyconnect support for more than 2 users.
Is for Anyconnect (tunnel-mode) only the Anyconnect Essentials license enough? Do I need a license for SSL VPN peers? What about Anyconnect clientless, I see that I need a premium license? Is this one enough ASA5510-SSL50-K9? It is really expensive in comparison with Anyconnect Essentials.
Here is my sh ver output:
Licensed features for this platform:Maximum Physical Interfaces : Unlimited Maximum VLANs : 50 Inside Hosts : Unlimited Failover : DisabledVPN-DES : Enabled
We’ve ordered ASA 5510 with security plus license as below description:
ASA5510-K8 ASA 5510 Appliance with SW, 5FE, DES L-ASA5510-SEC-PL= ASA 5510 Security Plus License w/ HA, GE, more VLANs + conns
The license details on the appliance shows as the below, Fail over : Enabled Encryption-DES : Enabled Encryption-3DES-AES : Disabled Security Contexts : Default GTP/GPRS : Disabled Any Connect Premium Peers : Default Other VPN Peers : Default Advanced Endpoint Assessment : Disabled Any Connect for Mobile : Disabled Any Connect for Cisco VPN Phone : Disabled Shared License : Disabled UC Phone Proxy Sessions : Default Total UC Proxy Sessions : Default Any Connect Essentials : Disabled Bot net Traffic Filter : Disabled Inter company Media Engine : Disabled
I’ve noticed that the 3DES is disabled, do I need to order another license to use 3DES or not ?Also, I need 2 ~ 5 branches to connect simultaneously and have VPN access on their laptops to the main branch via vpn software, which VPN software I should use and is our license enough or I should order another license.
I recently picked up two ASA5510s (ASA5510-SSL50-K9 & ASA5510-SEC-BUN-K) with intentions of creating an Active/Standy configuration. I'm receiving the error message "Mates' license (2 SSL VPN Peers) is not compatible with my license (50 SSL VPN Peers)", but I was under the impression that I didn't have to buy idential SSL VPN licenses post 8.2 in an Active/Standby configuration. am I missing a step that enables the license transfer(sharing?) feature to work correctly before the failover will build correctly?
I need to enable VPN-3DES-AES on an ASA5540. Show version provided this info below.
Licensed features for this platform: Maximum Physical Interfaces : Unlimited Maximum VLANs : 200 Inside Hosts : Unlimited Failover : Active/Active VPN-DES : Enabled VPN-3DES-AES : Disabled [Code]....
This platform has an ASA 5540 VPN Premium license.After doing some poking around I came across a link to request a free license but when the email came it warned that the requested license was lower than one currently assigned to the serial number provided. I do not have any of the old license information since this was set up years ago and was way before my time with the company. How to enable the feature as well as maintaining my vpn premium license features.
I have several ASA-5505 units with the SecurityPlus license. These are running older OS versions and I would like to upgrade them. I am wondering if I will lose the SecurityPlus if I upgrade the image to 8.3