Cisco Firewall :: ASA5505 Which License Is Needed

Jun 8, 2011

I have a spare ASA5505 w/Base License that we want to use as the router/firewall between our wi-fi network and our secondary internet connection. Currently we have a NetGear box as the router there and it is on its last legs.  In order for the ASA w/Base license to be able to issue over 150 IP address via DHCP which license do I need to purchase for it.

View 7 Replies


ADVERTISEMENT

Cisco Firewall :: 5510 - Which License Needed For ISP Failover

Mar 3, 2011

I Have ASA 5510. And I had two ISPs and I need to configure ISP failover. So which license i need? I Had License ASA-CSC10-PLUS License.

View 1 Replies View Related

Cisco Firewall :: 5505 Which License Needed To Buy For Normal Base

Sep 22, 2012

I have a couple of 5505's with base licenses. One of the two has a limited output when running the sho version command, as it has a restricted license. What license I would need to buy in order to bring it up to "normal" base license ?

View 1 Replies View Related

Cisco Firewall :: ASA5505 - Can NAT May Be Used For More Than 10 Users With License

Apr 20, 2012

I have 10 user license for Cisco ASA, i have to use this ASA for client connectivity. Can i do NAT of more than 10 users with this license? What i understand is NO.

But as per Below explaination looks like, i can if i am not doing default routing? Actually i just need to add a specific Route towards client DMZ interface on my ASA, no default route, so can i use more than 10 concurrent sessions with this license?

View 5 Replies View Related

Cisco Firewall :: Security Plus License For ASA5505

Jul 2, 2012

I have Cisco ASA5505 8.2(5) connected with Cisco 5520 8.2(1) via IPSEC tunnel, I was able to SSH from the inside 5520 to inside IP of the asa5505. but I after I upgrade the license to security plus at 5505 I lost the SSH and ASDM to inside IP of 5505 from the inside network of the 5520. however I still can use SSH and ASDM on outside IP of 5505.
 
I did a lot of testing to make it work but I couldn't I added SSH 0.0.0.0/0 inside and outside also I added acl on both interfaces. when I did a trace on the outside interface from the private network of 5520 to 5505 inside IP I got IPSEC spoofed by the way that trace only works with security plus because I try to test on all my other firewalls 8.2(5) it shows nothing and all my firewalls can accessed from the private network 5520 except the one with the security plus!

View 11 Replies View Related

Cisco Firewall :: ASA5505-SW-10-UL - How To Upgrade License

May 10, 2011

I want to confirm if the upgrade license (ASA5505-SW-10-UL=) is backward compactible with PIX 501 firewall device? though pix 501is end of life bit i want to verify if the upgrade license for asa5505 will work with it?

View 4 Replies View Related

Cisco Firewall :: Recover SEC License After Flashing ASA5505

Aug 28, 2012

a client of ours bought an ASA5505-BUN-SEC-K9, and it was working fine, for some reason (beyond me) they flashed the memory and configuration in an attempt to fix smoe problems they were facing. Now they are faced with the dilema that the SEC license is no longer visible and usuable, so how can they recover this license knowing that they have bought the bbundle mentioned above?

View 1 Replies View Related

Cisco Firewall :: ASA5505 License Duration Not Found

Jun 12, 2013

i've checked in on one of our 5510's and also on a 5505 but i don't seem to find the license duration (i.e "perpetual).is this normal or just an IOS or platform specific? [code] Cisco Adaptive Security Appliance Software Version 8.2(5)

View 1 Replies View Related

Cisco Firewall :: 10-User License For ASA5505 Allows DHCP To Hand Out 32 IPs?

Dec 26, 2011

My cisco representative tells me that I am limited to 10 IP addresses for my 10 user license on an ASA 5505 even though the Cisco documentation specifically states that a 10 user license allows the maximum DHCP clients to 32 IP addresses.
 
I want to have 30 computers get IP addresses from the ASA, but don't need any but one or two to get outside the internal network.  Is this possible with a 10 USER license.

View 19 Replies View Related

Cisco Firewall :: 10-User License For ASA5505 Allows DHCP To Hand Out 32 IPs

Sep 27, 2011

My cisco representative tells me that I am limited to 10 IP addresses for my 10 user license on an ASA 5505 even though the Cisco documentation specifically states that a 10 user license allows the maximum DHCP clients to 32 IP addresses.
 
I want to have 30 computers get IP addresses from the ASA, but don't need any but one or two to get outside the internal network.  Is this possible with a 10 USER license.

View 1 Replies View Related

Cisco Firewall :: ASA5505 With Base License - Access From Dmz To Internal

Dec 18, 2011

we have a cisco ASA5505 with base license and 3 interface configured. Internal 192.168.1.1/24 DMZ 172.16.0.1/24 Outside 20.20.20.20/24 The DMZ is configured to allow the traffic pass to the outside interface only (base license allow only traffic to one interface) in order to let clients on this network to browse internet. On the outside interface there's a nat configuration that let the port 443 to be natted to an in internal server. Is it possible to let the clients in DMZ to access to the internal server on port 443 from the outside interface?

View 3 Replies View Related

Cisco Firewall :: Difference Of VPN Plus License And Security Plus License ASA 5520

Oct 16, 2012

What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.

View 1 Replies View Related

Cisco LAN :: Failed To Upgrade ASA5505 License From 10 To Unlimited Users

Sep 4, 2011

I´m trying to upgrade a Customer's ASA 5505 base license from 10 to 50 users (ASA5505-SW-10-50=). But the reseller sent a ASA5505-SW-50-UL= license instead. I tried to register that license and the following messaged appeared.
 
Wrong Sku(s) 'ASA5505-SW-50-UL=' for 'ASA5505-K8' : Device contains following licenses 'ASA5505-SW-10,ASA5500-ENCR-K9'
Serial Number = JMX1235Z0TZ

same platform type as the failed serial number. An upgrade request is not allowed. open a Service Request using the TAC Service Request Tool at [URL].As an alternative you may also call our main Technical Assistance Center at 800-553-2447.Sincerely,Cisco Systems Licensing.
 
I tried to contact TAC for assistance but It's not possible because that kind of service is outside the parameters of the service contracts associated with my cisco.com profile.

View 3 Replies View Related

Cisco :: Zone Based Firewall Really Needed

Sep 18, 2012

I'm having a few problems at the moment with a zone based firewall setup. The more I looked into the problems the more I question whether I need the ZBF or not.My network is pretty simple. 1 Internet connection and 1 LAN interface and a few site to site vpns to the router.So what do people think to having this kind of set up and not using a ZBF?

View 11 Replies View Related

Cisco Firewall :: 5580 Do Static Command Needed

Oct 3, 2011

The firewall is running version #8.2 on ASA 5580. Address translation is not needed on Inside network and Outside network.But the customer has hundreds of static command as below.. [code] Can they all be removed and replace with one single command as below? 

View 1 Replies View Related

Cisco Firewall :: Source Routing Work Around Needed With ASA5515

Jun 10, 2013

I am setting up an ASA5515 to replace an existing Linux based firewall. Unfortunately the ASA5515 does not support source based routing.I have two internet connections currently used for specific connections - the second connection is NOT a failover connection.I have the default route to Internet connection 1.I want to route smtp out the second Internet connection.The routers connecting to the internet are a 877 and an 878The options I am considering is a layer 3 switch between the firewall and the routers to enable source based routing or replacing the 2 routers with a single router and the appropriate wic interfaces.

View 2 Replies View Related

Cisco Firewall :: ASA 5585 / SSP 40 - 10Gig Interface Needed For Log Server

Apr 26, 2013

We have deployed a few ASA 5585 SSP40 in our data centers to seperate different customer/security zones connected with 10Gig interfaces. Currently we have a dedicated log server attached to each ASA connected with a p2p 10Gig interface. While detailed log information is considered important I somehow have the gut feeling all this high end equipment and bandwidth is used a little too wasteful. I have little experience with these big firewalls and I have not yet seen the equipment in an attack situation, however I doubt a firewall could ever generate 10gig of log data, while doing the primary fire walling job at the same time. Looking at the typical packet size of a syslog message I don't even believe a 1 gig link could ever be saturated with pure syslog messages.

View 3 Replies View Related

Cisco Firewall :: ASA 5520 Needed To Be Configured In HA Active / Passive

May 24, 2011

I have the following Setup, Two Cisco ASA 5520 needed to be  configured in HA Active/Passive. The Firewalls includes also AIP module. Does the ASA 5520 will internally make the AIP modules also HA Active/Passive? Is there a document regarding the issue? Is there a seperate license for the AIP modules for HA scenario?

View 1 Replies View Related

Cisco Firewall :: Is ASA 5510 Firewall Required Any Subscription Or License

Nov 15, 2012

I am quite new to firewall, in my company one asa 5510 firewall is there.I configured inside, outside, dns, dhcp and nating.I need to config bandwidth limit (1Mbps) for inside port and I restruct like facebook, youtube and pornsites..And I heard that some subscription is required, really is it required?

View 1 Replies View Related

Cisco Firewall :: ASA 5500 - Get Firewall License To 500 Users?

Jan 25, 2012

I purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
 
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
 
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y  with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)

View 1 Replies View Related

Cisco Firewall :: Users Behind ASA5505 Firewall Are Unable To Access Internet

Feb 24, 2011

I have a normal setup of ASA5505 (without security license) connected behind an internet router. From the ASA5505 console I can ping the Internet. However, users behind the Firewall on the internal LAN, cannot ping the Internet even though NATing is configured. The users can ping the Inside interface of the Firewall so there is no internal reachability problem. In addition, I noticed that the NAT inside access list is not having any hit counts at all when users are trying to reach the internet.

When i replace the ASA5505 with a router with NAT overload configuration on it, the setup works normally and users are able to browse the internet.

The ASA5505 configuration is shown below.

hostname Firewall

interface Ethernet0/0
description Connected To Internet Router
switchport access vlan 10

[Code].....

View 2 Replies View Related

Cisco Firewall :: ASA5505 Lose Configuration If Upgrade Firewall

May 17, 2011

i have asa 5505 with the asdm v5.2 (4), and the asa v7.2(4). This platform has a base license. if i upgrade adsm and asa on v6.2(1) and v8.2(2) if I lose my license and that you need to activate them? i configured site to site vpn (this firewall and the another) that i lose my configuration if i upgrade my firewall.

View 2 Replies View Related

Cisco Firewall :: ASA5505 Can't Ping New Firewall On Inside Interface

Jul 14, 2011

I've recently upgraded my old firewall from a PIX to an ASA5505 and have been trying to match up the configuration settings to no avail. I have is that I can't ping the new firewall on it's inside interface, despite having "icmp permit any inside" in the running config. Secondly, the server I have on there ("Sar") can't connect out to the internet.I've included the ASA's running config incase anybody can see if something stands out. I have a feeling it's either not letting anything onto the inside interface, or there is no nat going on. Lastly (and possibly relevant), the firewall is actually going at the end of a vlan, which is different to the firewall's inside vlan number. I don't know if this is actually the problem because the server can't connect out even if connected directly into the firewall.

View 32 Replies View Related

Cisco Firewall :: Unable To Ping Internet IPs From ASA5505 Firewall

Jan 9, 2013

Internet ISP -> Juniper SRX 210 Ge-0/0/0
Juniper fe0/0/2  -> Cisco ASA 5505
Cisco ASA 5505 - >Inernal LAN switch.
 
1.  Internet  is connected to Juniper Ge0/0/0  via /30 IP.
 
2. Juniper fe0/0/2 port is configured as inet port and configured the Internal public LAN pool provided by the ISP. And this port is directly connected to  Cisco ASA 5505 E0/0. Its a /28 pool IP address. This interface is configured as outside and security level set to 0.

From Juniper SRX, am able to ping public Internet IPs (8.8.8.8).
 
Issue:

1. From ASA am unable to ping public ip configured on Juniper G0/0/0 port.(/30)
2. From ASA no other Public internet IP is pinging.
 
Troubleshooting Done so far.
 
1, Configured icmp inspection on ASA.
2. Used the packet tracer in ASA, it shows the packet is flowing outside without a drop.
3.  Allowed all services in untrust zone in bound traffic in Juniper SRX.
4. Viewed the logs when I was trying the ping 8.8.8.8 in ASA. It says "Tear down ICMP connection for faddrr **** gaddr **

View 2 Replies View Related

Cisco Firewall :: ASA5505 Firewall Rule Not Blocking

Apr 1, 2013

I'm trying to troubleshoot an ASA5505.
 
The original goal was to block "Mumble/Murmur" (a voip app) traffic, which runs on TCP/UDP 64738, both inbound and outbound, except to a certain host (63.223.117.170).
 
However, when nothing I tried seemed to make a difference, just to troubleshoot, I decided to try blocking all inbound traffic.  I first disconnected ethernet port 0/0 to ensure that it was cabled correctly and the outside interface went down when I did.  That worked as expected, so I confirmed I had the right interface and it was cabled correctly.
 
I then applied a "any any deny ip" rule as the first element in the outside interface access_list, as you can see below.  However, it appears to have had no real effect and the hit count is very low (it should be astronomical).
  
show ver 
Cisco Adaptive Security Appliance Software Version 9.0(2)
Device Manager Version 7.1(2) 
Compiled on Thu 21-Feb-13 13:10 by builders
System image file is "disk0:/asa902-k8.bin"

[Code].....

View 4 Replies View Related

Cisco :: Installation PI1.2 Basic License With LMS4.0 License For 100 Devices

Apr 3, 2013

I’m stuck in some problem with installation of LMS4.0 in customer site.
 
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
 
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?

View 3 Replies View Related

Cisco Firewall :: Getting CSC-SSM-20 Renewal License?

Jan 10, 2012

i have CSC-SSM-20  i want to renew the license to support 750 users for 3 years if i have base license only and if i have base and plus as bundle?i want to know the steps and also the part numbers and what is the difference between these two part numbers
 
ASA-CSC20-750UP-1YASA 5500   CSC-SSM-20 750-User w/ Plus Lic. Renewal (1-year)
  ASA-CSC20-750P-1YASA 5500   CSC-SSM-20 750-User Plus Lic. Only Renewal (1-yr) 

View 2 Replies View Related

Cisco Firewall :: Can Buy Plus License For ASA 5520

Jan 11, 2012

Can i buy a plus license for asa 5520??

View 2 Replies View Related

Cisco Firewall :: See License For The SSM-10 Card?

Mar 25, 2013

My customer is asking to see the license for the SSM-10 card how do i access the card to show this information. the Firewall unit has a base licence installed.

View 2 Replies View Related

Cisco Firewall :: ASA 5505 - 3 DES License

May 20, 2013

I'm new to ASA and bought a used one from ebay but I cannot connect to the ASDM - I get an error in all the browsers.
 
Cannot communicate securely with peer: no common encryption algorithm(s).
 
(Error code: ssl_error_no_cypher_overlap)
 
Having browsed the support forums and Google - it seems I need the 3DES license. I have obtained an activation key from Cisco and applied it to my ASA 5505 however I get a warning about the device is licensed for a higher software level. the license on the ASA is Security plus. When I apply the activation key from Cisco most of the features are disabled.

[Code] ......

View 4 Replies View Related

Cisco Firewall :: Do Need Security Plus License To Do HA With Two 5520

Mar 7, 2011

Do I need the security plus license to do HA with two 5520's?I was told by our purchasing department that the 5520 was supposed to be able to do HA out of the box, but when I look I see only the VPN + license.  Does that mean I can download the security plus license?  Or do I even need it on the 5520.

View 2 Replies View Related

Cisco Firewall :: Unable To Upgrade Pix-525 FO License?

Feb 10, 2012

Not  abe to upgrade the IOS image PIx7.0  from earlier version 6.3   in  to my old Pix-525 FO(Secondary unit) license box .
 
Is it possible to upgrade without Primary unit (Unrestricted License)  ?

View 6 Replies View Related

Cisco Firewall :: ASA 5520 / License Cost For AIP?

Nov 27, 2011

I have got ASA 5520. I am planning to install Cisco ASA AIP SSM-20 and Cisco ASA Content Security and Control (CSC) Security Services Module on ASA 5520.. However I am also thinking of adding AIP only as I can do the function of content filtering with proxy server. Relating this issue I would like to ask -
 
1. What would be the benefit of adding CSC ?

2. Do I have to pay the license cost every year for both of these SSM? What would be the cost ?

3. Upto how many SSM can I add into ASA 55020 ?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved