Cisco Firewall :: Difference Of VPN Plus License And Security Plus License ASA 5520

Oct 16, 2012

What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.

View 1 Replies


ADVERTISEMENT

Cisco Firewall :: ASA 5510 - Difference Between CSC-10-PLUS And Security Plus License

Mar 3, 2011

I have ASA 5510. Is there any difference between CSC-10-PLUS license and Security Plus License...

View 3 Replies View Related

Cisco Firewall :: Do Need Security Plus License To Do HA With Two 5520

Mar 7, 2011

Do I need the security plus license to do HA with two 5520's?I was told by our purchasing department that the 5520 was supposed to be able to do HA out of the box, but when I look I see only the VPN + license.  Does that mean I can download the security plus license?  Or do I even need it on the 5520.

View 2 Replies View Related

Cisco Firewall :: Can Buy Plus License For ASA 5520

Jan 11, 2012

Can i buy a plus license for asa 5520??

View 2 Replies View Related

Cisco Firewall :: ASA 5520 / License Cost For AIP?

Nov 27, 2011

I have got ASA 5520. I am planning to install Cisco ASA AIP SSM-20 and Cisco ASA Content Security and Control (CSC) Security Services Module on ASA 5520.. However I am also thinking of adding AIP only as I can do the function of content filtering with proxy server. Relating this issue I would like to ask -
 
1. What would be the benefit of adding CSC ?

2. Do I have to pay the license cost every year for both of these SSM? What would be the cost ?

3. Upto how many SSM can I add into ASA 55020 ?

View 6 Replies View Related

Cisco Firewall :: 5520 - ASA Failover Pair With Different License

Apr 15, 2013

I have a running ASA5520 in my network and recently we plan to add a failover pair as a standby unit for the running asa. Both of the ASA have the same specs and software. the only thing that the soon to be secondary ASA does not have is the AnyConnect Essential license. is it still possible for the unit to be the standby unit?
 
below is the license capture from both of the unit.
 
Running ASA:
Licensed features for this platform:
Maximum Physical Interfaces  : Unlimited
Maximum VLANs                : 150     

[Code].....

View 3 Replies View Related

Cisco Firewall :: Failover License Sync Between Two ASA 5520?

Jun 3, 2013

According to the link here:[URL]Starting with Version 8.3(1), it no longer needs to install identical licenses. Typically, we only buy a license only for the primary unit; for Active/Standby failover, the secondary unit inherits the primary license when it becomes active.So I wanna know if there's some additional configuration to synchronize the licenses such as SSL VPN or Context between the primary one and the second one? Or they can just synchronize by default as soon as I finish the failover configuration and when the primary one gets down, the second one will take over the role including licenses automatically?

View 4 Replies View Related

Cisco Firewall :: Security Plus License For ASA5505

Jul 2, 2012

I have Cisco ASA5505 8.2(5) connected with Cisco 5520 8.2(1) via IPSEC tunnel, I was able to SSH from the inside 5520 to inside IP of the asa5505. but I after I upgrade the license to security plus at 5505 I lost the SSH and ASDM to inside IP of 5505 from the inside network of the 5520. however I still can use SSH and ASDM on outside IP of 5505.
 
I did a lot of testing to make it work but I couldn't I added SSH 0.0.0.0/0 inside and outside also I added acl on both interfaces. when I did a trace on the outside interface from the private network of 5520 to 5505 inside IP I got IPSEC spoofed by the way that trace only works with security plus because I try to test on all my other firewalls 8.2(5) it shows nothing and all my firewalls can accessed from the private network 5520 except the one with the security plus!

View 11 Replies View Related

Cisco Firewall :: ASA 5520 - Failover In Off State After Applying New License

Mar 24, 2013

We apply a new anyconnect mobile license to our primary asa 5520 and the failover feature went into an off state. WE have now applied a second purchased anyconnect mobile to our secondary asa but the failover is still inactive/off.
 
bcoh1fw50# sh failover state 
State          Last Failure Reason      Date/Time
This host  -   Primary
Disabled       Ifc Failure              14:43:21 EST Jan 30 2013

[Code].....

View 3 Replies View Related

Cisco Firewall :: ASA 5505 Security Plus License Upgrade?

Apr 19, 2012

We want to upgrade one of our Cisco 5505 with Security Plus license. what is the difference between L-ASA5505-SEC-PL and ASA5505-SEC-PL upgrade licenses?

View 1 Replies View Related

Cisco Firewall :: Security Context License On 5550

Dec 9, 2012

 I need your support for upgrading the Security context license on 5550, at present we have 5 Security context license installed in ASA but we want it to increased till 10 conctexts. I want to understand if we need to get addtional 5 Security context license or 10.     

View 5 Replies View Related

Cisco Firewall :: Security Context License Requirement - ASA5520

Jan 14, 2013

A simple question - I have ASA 5520s and was wondering what license is required to create multiple (more than default 2) security contexts.

The ASA already have ASA 5520 VPN Plus license.
 
Software Version 8.4(1)

View 2 Replies View Related

Cisco Firewall :: Adding Second Subnet On ASA 5505 With Security Plus License

Jan 31, 2012

We recently upgraded a ASA 5505 with the security plus license to allow us to add a second subnet, but are having a few problems configuring the second subnet.  The original subnet we have configured 10.1.1.0 is able to access the internet without any problems.  However the new subnet 10.1.5.0 is unable to access the internet and when we ran a trace packet the nat config nat (inside) 1 0.0.0.0 0.0.0.0 is showing as the rule that drops the packet.
 
Additionally we have not been able to get the 2 subnets to talk to each other even though same-security-traffic permit inter-interface is configured.  How to configure the subnet 10.1.5.0 to access the internet or to get the subnets to communicate.  Below is a streamlined version of our current config.

!interface Vlan1nameif insidesecurity-level 100ip address 10.1.1.1 255.255.255.0 ospf cost 10!interface Vlan2nameif outsidesecurity-level 0ip address 66.66.66.66 255.255.255.240 ospf cost 10!interface Vlan13nameif corporatesecurity-level 100ip

[Code].....

View 15 Replies View Related

Cisco Firewall :: ASA 5505 Security License And Vlans Supported?

May 18, 2013

I am buying ASA 5505 with security  license. It says it can support 20 vlans does it support 20 vlans by allowing to create subinterfaces? As it has 8 physical ports only?

View 3 Replies View Related

Cisco Firewall :: ASA 5510 With Security Plus License Lost Contexts

Jan 28, 2013

I have a ASA 5510 with Security Plus License and when I looked at the devices a few days ago I had 2 contexts, however after configuring the Mgm port as a regular port the contexts show 0, why?  I can not find any post on the internet where this issue has happen:  here is the output from show ver:

Cisco Adaptive Security Appliance Software Version 7.0(8)
Compiled on Sat 31-May-08 23:48 by builders
System image file is "disk0:/asa708-k8.bin"

[Code]......

View 3 Replies View Related

Cisco Firewall :: ASA5510 Security Context License Transfer To Another Device

Apr 30, 2012

Is it possivble to have 10 security licenses, license to a Cisco 5510 and have them transfeered to a Cisco5520?    

View 1 Replies View Related

Cisco Firewall :: Update License Content Security And Control Info ASA 5510

Mar 20, 2013

I have to upgrade to an ASA 5510 CSC, and the new license is generated, the file you sent me licensing, only seen this:Activation Code not required for this renewal. Please go to "Administration> Product License" in the CSC SSM console and click "Check Status Online" to get the latest expiration date (BASE: 09/04/2014, PLUS: 09/04/2014).This means that what I have not make any upgrades or license charge in the ASA? Does the automatic update is made?

View 1 Replies View Related

Cisco :: Installation PI1.2 Basic License With LMS4.0 License For 100 Devices

Apr 3, 2013

I’m stuck in some problem with installation of LMS4.0 in customer site.
 
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
 
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?

View 3 Replies View Related

Cisco VPN :: ASA 5520 - VPN Access And License

Jan 22, 2012

We have a Cisco ASA 5520 with the VPN Plus License and 8.04 IOS installed, we want to set up vpn access to our users. We can use the Cisco VPN client which works on Windows Platform, but we also have MAC OS 10.7 which works only with Cisco Any connect.
 
I am a little bit lost with all the client and the license, actually we can't setup more than 2 vpn session with an Any connect client installed on MAC or Windows. The authentication is by Certificate, the first two connect fine, but the third one don't connect and prompt for a username / password. I joined a SH VER of my ASA, what is wrong on the license or perhaps it's a configuration problem? 
 
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)  
Boot microcode   : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03 
[Code]....

View 3 Replies View Related

Cisco VPN :: 5520 AnyConnect VPN Phone License

Apr 20, 2012

We have bought L-ASA-AC-PH-5520=Anyconnect Vpn Phone License for our Cisco Phones but when we entered this license into our ASA it shows th following i.e enabled for linksys phones. Is there a diff part no to enable vpn for cisco phones. [code]

View 2 Replies View Related

Cisco Security :: 880 NPE / How To Change License

Mar 26, 2012

i have cisco 880 with NPE licence, but i need encryption on this device. I change IOS to c880data-universalk9-mz.151-3.T1.bin, but i still have NPE License and only Evalution without NPE. How  can i have permanent license?
 
show license all
 
License Store: Primary License Storage
 StoreIndex: 0   Feature: advsecurity_npe                   Version: 1.0
License Type: Permanent
License State: Active, Not in Use

[code]....

View 3 Replies View Related

Cisco VPN :: ASA 5510 - Security Plus License

Aug 21, 2012

We’ve ordered ASA 5510 with security plus license as below description: 

ASA5510-K8
ASA 5510 Appliance with SW,   5FE, DES
L-ASA5510-SEC-PL=
ASA 5510 Security Plus License   w/ HA, GE, more VLANs + conns
 
The license details on the appliance shows as the below,
Fail over                        : Enabled 
Encryption-DES                  : Enabled 
Encryption-3DES-AES             : Disabled
Security Contexts                : Default 
GTP/GPRS                        : Disabled
Any Connect Premium Peers      : Default 
Other VPN Peers                 : Default 
Advanced Endpoint Assessment    : Disabled
Any Connect for Mobile            : Disabled
Any Connect for Cisco VPN Phone  : Disabled
Shared License                  : Disabled
UC Phone Proxy Sessions          : Default 
Total UC Proxy Sessions          : Default 
Any Connect Essentials            : Disabled
Bot net Traffic Filter            : Disabled
Inter company Media Engine        : Disabled 
  
I’ve noticed that the 3DES is disabled, do I need to order another license to use 3DES or not ?Also, I need 2 ~ 5 branches to connect simultaneously and have VPN access on their laptops to the main branch via vpn software, which VPN software I should use and is our license enough or I should order another license.

View 3 Replies View Related

Cisco Security :: C2911 - Enable SSL VPN License

Jul 3, 2012

i had installed the SSL_VPN to the router C2911, running on IOS 15.0 But i couldn't see the SSL_VPN enable while i do show license feature? i did reload the router several time and accept the end user agreement.
 
attach the
01. show license feature
02. show license detail

View 1 Replies View Related

Cisco WAN :: 1921 - IOS Upgrade With Security License?

Nov 4, 2011

I have a Cisco 1921 ISR Router with Security License running software version 15.0. I want to upgrade the router to 15.1. But I don't want to lose the security license that came with the router. When I look at the IOS downloads page on Cisco, all I see is universal images for all versions of 15.1.
 
My question is - where is the security license stored? In the IOS or programmed in somewhere else of the router? If I upgrade my router to one of the newer 15.1 universal images, will I lose my security license?

View 2 Replies View Related

Cisco VPN :: 2911 - VPN License / Security Pack

Sep 25, 2012

We are designing a solution for our customer, they plan to connect 5 site to their main office, on the main office, they use CISCO2911, branch use CISCO1921, so my question is:
 
1, If I want to use IPSec VPN connect branch and main office, apart from the router, I only need to buy the Security pack, like SL-19-SEC-K9/SL-29-SEC-K9, no need to buy SL-19-DATA-K9/SL-29-DATA-K9, am I right? 

2, If I want to use SSL VPN connect branch and main office, apart from the router and SL-19-SEC-K9/SL-29-SEC-K9, I only need to buy L-FL-SSLVPN10-K9 for CISCO2911 in main office, no need to buy L-FL-SSLVPN10-K9 for branch as each CISCO1921 has two default SSL license?

View 2 Replies View Related

Cisco Wireless :: ASA 5520 - Evaluation License For AnyConnect Mobile

Mar 9, 2011

I have 50 SSL Premium licenses on my ASA 5520 running 8.4. I want to run Anyconnect on IPAD- and IPHONE-devices but it seems that this requires a Mobile-license on top of the premium-license. Is it possible to receive an evaluation-license for this? It will take a few days to receive permanent licenses and I want to user this now.

View 1 Replies View Related

Cisco VPN :: 5520 - AnyConnect Secure Mobility Client License?

Mar 1, 2011

I need to activate AnyConnect SecureMobility client on an IPAD. I have an ASA with the below feature licenses:
 
[code]...
 
This platform has an ASA 5520 VPN Plus license
 
As I've understood that I need the ASA-AC-M-5520 license for each IPAD used but they mentioned that we need also the Essential or premium license to be activated on the ASA as well. As shown above, I have the "VPN Plus license" activated on the firewall.

View 1 Replies View Related

Cisco WAN :: Upgrade License 1941-K9 From IPBase To Security

Oct 25, 2011

I would like to Upgrade license Cisco 1941-K9 from ipbase to security

View 5 Replies View Related

Cisco Switching/Routing :: Router 1941 Security License?

Mar 12, 2013

I have a cisco router 1941 and i have uploaded before evaluation license , now i have already bought cisco security license .I have already installed on cisco router , but the problem the router is still using  the evaluation license not the new license .
 
RSP#sh flash:
-#- --length-- -----date/time------ path
1     55088360 Oct 10 2012 06:04:10 +00:00 c1900-universalk9-mz.SPA.151-4.M4.bin
2         2903 Feb 4 2013 12:23:32 +00:00 cpconfig-19xx.cfg

[Code].....

View 19 Replies View Related

Cisco Security :: ASA 5545 - 8.6 - Active / Standby - License Upgrade

Feb 4, 2013

We are planning to upgrade the ASA license in an A/S pair by adding the ASA5500-SC-20= license. The ASA is 5545 and runs 8.6. According to documentation, after 8.3 version, the ASAs can share a license features and do not require the same license on both boxes. I run a test in GNS3 with 8.4(2) images and I saw that by adding the 'activation-key' command only on the primary unit did the job as the 'show activation-key' output shows. In order to be 100% sure would like to verify the following:

Putting the activation-key only on the primary unit is enough and there is no need to do anything elseIn case the primary unit is standby, again we have to put the actication-key command on the primary unit (I am asking this because the 'activation-key' command is not listed under the commands that are not replicated to the other unitk, but doesn't make sense to be replicated since the activation-key is 'tied' with the S/N of the device).

View 4 Replies View Related

Cisco Security :: Remove License Previously Installed On ASA 5510?

Nov 15, 2010

I'm currently reconfiguring an ASA5510 installation to a HA setup with a second 5510. The old 5510 has an "AnyConnect for Mobile" license which isn't being used. So we upgrade that one to a SecPlus License to enable failover posibilities and we bought a new 5510 also with a SecPlus license. When I'm trying to enable failover I get the message that my mate hasn't got the "AnyConnect for Mobile" license. I know for failover both devices must be exactly the same (at first i thougth that the AnyConnect license would be lost when upgrading to SecPlus). So now I'm wondering and searching for solutions to remove the AnyConnect license (because we don't use it).

View 7 Replies View Related

Cisco Switching/Routing :: License Upgrade In 2900 For Security K9 Feature?

Dec 18, 2012

i have 2921 router with base license . i want to upgrade to it to security k9 feature or want to enable it. i have license file with product activation key. how should i do it. if any body have screen shot file

View 1 Replies View Related

Cisco Firewall :: Getting CSC-SSM-20 Renewal License?

Jan 10, 2012

i have CSC-SSM-20  i want to renew the license to support 750 users for 3 years if i have base license only and if i have base and plus as bundle?i want to know the steps and also the part numbers and what is the difference between these two part numbers
 
ASA-CSC20-750UP-1YASA 5500   CSC-SSM-20 750-User w/ Plus Lic. Renewal (1-year)
  ASA-CSC20-750P-1YASA 5500   CSC-SSM-20 750-User Plus Lic. Only Renewal (1-yr) 

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved