Cisco Infrastructure :: C3560 Licenses To Upgrade From IOS 12.X To 15.0.x To Maintain Functionality

Jun 27, 2012

I am upgrading the network equipment at my place of employment. We use Cisco C3560, 2960, 4506 and I was noticing that IOS 15.0.x is available. After doing some reading it appears that Cisco is going to a pay for the licensing functionality that you want. Do I need to purchase licenses to upgrade from IOS 12.X to 15.0.x to maintain functionality?

View 4 Replies


ADVERTISEMENT

Cisco Infrastructure :: C3560 - Unable To Login Through Hostname

Jul 4, 2012

I am unable to login to switch c3560 through Hostname but able to login through IP address. when i am putting the command : login authentication telnetpwd
 
getting the below message:
 
AAA: Warning authentication list "telnetpwd" is not defined for LOGIN.

View 5 Replies View Related

Cisco Infrastructure :: C3560 Port Shutdown Shut Up

Jul 13, 2011

Is it possible to reduce de recoveery time after an interface shutdown? Current interface configuration is as follows and it takes 1 second to recover from a shutdown. I need to decrease this time.(Cisco Catalyst C3560) [code]

View 1 Replies View Related

Cisco Wireless :: Upgrade C240 MSE Platform Size And Maintain UID?

Mar 6, 2013

When we originally deployed our Cisco Prime NCS and MSE Virtual Appliances, the VMsphere server they were on was not able to assign us the level of resources we requested.  We installed the MSE as "LOW" system due to the memory and CPU requirements.  It has a 2000 CAS element limit.  At the time we were licensed for 1000, so no huge problem.
 
Now, we purchased a Cisco UCS C240 server to run our Prime NCS and MSE on, which gives us our own environment where we have plenty of resources.  I also bought 6000 CAS element licensing.
 
The catch is, how can I either do a fresh install, using the same UID, on our new UCS server, so that our licensing is still valid when we move the box, or, is it possible to do some sort of platform reinstall or upgrade after moving our original MSE VM guest over to the UCS server?  Sadly, I can't even utilize the additional 1000 CAS element licensing at this time because it won't allow me to add the 6000 license and use only 2000, on the LOW appliance.  So I've got to get these VM guests moved, but maintain any UID's so that the licensing still works.
 
Is it possible to disconnect the licensing we have, from the UID, and move it to a different UID?

View 6 Replies View Related

Cisco VPN :: 5505 Upgrade Only Web Vpn Portion To Allow More Licenses

Sep 16, 2012

I have a cisco ASA5505, with  base license, it appears I can only have 2  ssl/webvpn connection running at any one time.  How can I upgrade only the webvpn portion to allow more licenses? 

View 2 Replies View Related

Cisco Switching/Routing :: C3560 SW IOS Upgrade?

Nov 23, 2012

I have C3560 switches in my work environment. I want configure ssh on that switch but the IOS what they have 'c3560e-universal-mz.122-58.SE2' not support. As per advised I was triying to upgrade 'c3560e-universalk9-mz.122-58.SE2" for all my access switches.
 
I successfully upgraded for two switches.
 
I have two problems now
 
01. I upgraded the IOS successfully one Switch but the Poe is not working. What is the reason ?
 
02. After upgrade the IOS, the out put is as follows
 
Switch   Ports  Model              SW Version              SW Image
------   -----  -----              ----------              ----------
*    1   30     WS-C3560E-24PD     12.2(35)SE5             C3560E-UNIVERSAL-M
Cisco#sh boot sys

[Code].....

View 4 Replies View Related

Cisco Switching/Routing :: WS-C3560-24PS / WS-C3560-48PS - Port With WAP Goes To Err-disable?

Oct 11, 2012

We have a Cisco switch in each office and every now and then the port that has the D-Link Wireless AP (DAP-1522) connected to it goes to err-disable state. Actually sometimes even a regular port that has a cisco phone connected may also go to err-disable state (less often). So I have to telnet into the switch and issue shut and no shut command on that interface to get it back to life, then it works for a few days or weeks until it happens again. Any suitable configuraiton for that interface, that would prevent that from happening or a workaround ?
 
Here's the info:
 
Model: cisco WS-C3560-24PS and cisco WS-C3560-48PS
Image:c3560-ipbase-mz.122-35.SE5.bin
 
This is the log from one switch:

31w5d: %PM-4-ERR_DISABLE: psecure-violation error detected on Fa0/2, putting Fa0/2 in err-disable state
31w5d: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 74e2.f592.f7f2 on port FastEthernet0/2.
31w5d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed  state to down
 
And from another, which is almost the same:

5d10h: %PM-4-ERR_DISABLE: psecure-violation error detected on Fa0/3, putting Fa0/3 in err-disable state
5d10h: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address d8a2.5e31.2cf6 on port FastEthernet0/3.
5d10h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down
5d10h: %LINK-3-UPDOWN: Interface FastEthernet0/3, changed state to down
 
Here's the configuration of fe interfaces (they are all alike):

interface FastEthernet0/2
description Voice & Data Combo Port
switchport access vlan 11
switchport mode access
switchport voice vlan 15

[code]....

View 3 Replies View Related

Cisco Infrastructure :: Upgrade IOS On ASA 5520?

Jul 4, 2011

I am going to be updating the IOS on our Cisco ASA 5520 from verion 7.0(8) to 8.2(5).  I am also going to setup AnyConnect.  Are there any major changes in the 2 IOS versions that I need to be aware of or will the config work in either version?  Also, we are currently using the Cisco VPN Client to connect to our network.  Will that still work after the upgrade?

View 3 Replies View Related

Cisco :: To Upgrade NCS 1.1.0.58 Prime Infrastructure To 1.3

Feb 20, 2013

I´m about to upgrade a customers appliance box to PI 1.3. I am guessing an upgrade to 1.2 would be almost the same, license wise.

View 10 Replies View Related

Cisco :: Upgrade From WCS 7.0 To Prime Infrastructure 1.2

Jan 12, 2013

I need to know how to do the upgrade from WCS 7.0 to Prime Infrastructure 1.2.
 
I was reading and i need to upgrade to the NCS 1.1 before to go to prime infrastructure 1.2.
 
I will need license to NCS 1.1 before upgrade to infraesctructure 1.2 ?
 
Will i have some problem with this upgrade ? correct process for not have any problem with this upgrade ?

View 4 Replies View Related

Cisco Infrastructure :: Can't Upgrade An 1811 Router

Oct 21, 2012

trying to upgrade an 1811 to the latest firmware. [code] just seems to always boot back to the original file and not the one i just tftp'd up. could it be that this router requires additional ram to support this ios?

View 5 Replies View Related

Cisco :: Login After Upgrade From NCS 1.1 To Prime Infrastructure

Nov 17, 2012

I have upgraded NCS 1.1.1.24 to PI 1.2 lately. The installation process completed successfully.But now i am not able to log in to the GUI anymore as root. After entering the password all I get is a blank site (undefined).I get the same result with all known browsers. Rebooting or restarting NCS does not change anything.

View 12 Replies View Related

Cisco :: NCS Upgrade V 1.1.1 To Prime Infrastructure V 1.2 Not Working

Nov 18, 2012

after an upgrade of NCS 1.1.1.24 to CPI 1.2 on green field, it was not possible to reuse the GUI.  During the upgrade, I''ve shortly seen an oracle DB error, but the upgrade was going through, without problems.At the end, it was not possible to use the GUI, and every trial to start the services was stopped with errors.I've found the following severe Bug ID's in the support forum: Bug CSCuc29378 Prime Infrastructure 1.2 won't start after a db restore/Upgrade from NCS1.1.1.24 Oracle DB bug as well: CSCtw59460.I see only a new installation from scratch (1.2) as solution, but the bug is not resolved in V1.2, as seen in the bug tool.
 
- As the customer has an v.1.0 license who worked with NCS 1.1.1, do I need an upgrade order to be able to activate an installation from the v 1.2 ova (new PAK)??
 
- I'm searching for a one year CPI partner license, because I heard about in some Cisco Live sessions, but I did not find a way to acces´s to it.

View 2 Replies View Related

Cisco :: LMS 4.1 (Windows) / NCS 1.1 (VM) Upgrade To Prime Infrastructure?

Jan 23, 2013

Im getting a bit confused about the whole upgrade migration process for the following config to Cisco Prime Infrastructure:
 
LMS - Version 4.1 , 500 devices. Windows Server 2008 R2 Standard SP1
NCS – version 1.1 , 50 devices  Red Hat Linux ( 64 Bit)  (Installation software - NCS-VA-1.0.1.4-small.ova)
       
I want to be able to backup databases and migrate licensing from LMS and NCS to one platform.

View 1 Replies View Related

Cisco :: LMS 4.1 - Upgrade To Prime Infrastructure / Migrate WCS To NCS?

Apr 2, 2012

I have a client who has LMS 4.1 with SAS support, I know that I can upgrade him to the Prime infrastructure for LMS and NCS, however he is licensed for 100 devices. He also has WCS 7.0 with 50 AP licenses, I want to upgrade his LMS to Prime infrastructure and then migrate his WCS to NCS, but how do I know combine the both so that he is on one platform.

View 1 Replies View Related

Cisco :: R-PI-1.1-500-K9 How To Upgrade To Latest Version Of Prime Infrastructure

Apr 9, 2013

We just purchased the following items:
 
(1) R-PI-1.1-500-K9
(2) PRIME-NCS-APL-K9
 
 I want to know how I can upgrade to the latest version of Cisco Prime Infrastructure.

View 1 Replies View Related

Cisco Infrastructure :: 2821 - IOS Upgrade Failed Several Times

Dec 19, 2012

I am running 12.3(11) T8 on Cisco 2821 platform and trying to upgrade to 15.0. No luck. So I tried to upgrade it to 12.4 24T. But failed several times on different routers. Is there an intermediate version I should land before jumping to 12.4 24T?

View 3 Replies View Related

Cisco Infrastructure :: SRE-9XX Quad Core Upgrade Processor In Devices

Sep 23, 2012

Any thoughts on Cisco putting a quad core processor in some near future version of this card?, the current versions are simple dual processors that does not give you much to work with if running ESXi 5 on one of the vCPUs.

View 1 Replies View Related

Cisco Infrastructure :: E3000 - Firmware Upgrade Now No File Sharing?

Oct 10, 2012

I recently installed a firmware upgrade on my E3000 to firmware version 1.0.04.build 6.  Since the upgrade I am unable to see any of my files on my network computer which is running windows 7.  Before everything was fine and I could stream to my dvd players and dish receivers. 

View 1 Replies View Related

Cisco Infrastructure :: Upgrade Boot ROM Version On 7200 Router?

Sep 26, 2011

How do I upgrade the boot rom version on the 7200 router?  I am running IOS Version 12.4(22)T and when I plug in the serial ds3 card in my router it keeps rebooting with a watch dog error ( see below).  Also, what version should I upgrade to?

Router#sh verCisco IOS Software, 7200 Software (C7200-SPSERVICESK9-M), Version 12.4(22)T, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Fri 10-Oct-08 10:10 by prod_rel_team
ROM: System Bootstrap, Version 12.2(4r)B, RELEASE SOFTWARE (fc1)BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(13)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Router uptime is 0 minutesSystem returned to ROM by power-onSystem image file is "sup-slot0:/c7200-spservicesk9-mz.124-22.T.bin"

[code]....

View 1 Replies View Related

SNR And CRC - How To Maintain Connection

Feb 20, 2012

I got Serbian Orion Telekom ADSL Max packet (16/1mb, modem: tp-link td-8816 v5), and used it in Belgrade without any issues with speeds of 13.95mb / 0.86mb. Since I have moved to another city (with recently done all infrastructure) I got this sudden CRC problems, plus ADSL2+ connection problems. Currently at ADSL2+ Annex A. and here is my speed test: And now, what's constantly occuring and is annoying me to bits is the thing that at ADSL2 connection I connect at 10mb with SNR of 6db and it successfully hangs on to the connection, but on ADSL2+ (16mb, max 24mb) with SNR of 6.8db it drops every few minutes. How can I use my 16mbit normally instead of only 10? Maybe some kind of low SNR router could work? How to treat CRC? I have new telephone cable, checked the splitters and also in wall connector.

View 3 Replies View Related

D-Link DIR-615 :: DIR-632 Signal Does Not Maintain Connection

Apr 18, 2011

I recently purchased the dir-632 and am having trouble getting my Apple Powerbook G4 to join the airport network.  I get this message, you may have entered an incorrect password, (I know that I have not), network name (I know this is correct), chosen the wrong type of wireless security (here I think is my problem) or may be out of range of the base station, (impossible as I am 10 feet away, and my PC's all work in the same range).

-My settings are      DHCP client
-cable status          Connected
-network status      connected
-801.11 mode         11bgn

I get a good strong signal from the airport but get a status connected to network and getting status message at the bottom, but the signal changes to not associated with any network every 30 seconds or so.  this just cycles between the two messages.  the signal does not maintain a connection. 

View 3 Replies View Related

Cisco Wireless :: 1552 RAP-to-RAP And Maintain Redundancy With Connection To WLC

Feb 26, 2013

I need to know if i can connect RAP to RAP and maintain redundancy with connection to WLC.
 
I have one 1552 with the gigabit ethernet connected to the gigabit ethernet to another device that has a point-to-point link with another device where have a ethernet connection with a switch in the same broadcast domain where i have my WLC.
 
Next to this 1552 i have another 1552 that have the same situation, both with omnidirectional antenna.
 
I would like to have a Mesh connection with these two 1552 in 5Ghz, because if some point-to-point link is down i need redundancy to the WLC and my network, because i have some clients connected in the 2.4 Ghz in both Access Points.

View 4 Replies View Related

Can't Maintain Wifi Connection In Windows Vista?

Jan 26, 2013

I borrowed a laptop from my sister while my laptop is out of commission. I've been trying to use the wifi, but the connection keeps dropping. I've tried following different pieces of advice from the internet, and I still can't get it working[CODE]

View 19 Replies View Related

Balking Wireless G Router Do Not Maintain Settings

May 14, 2012

I have a Belkin Wireless G Router. Whenever I set up a wireless password and network name, within a few hours, the router resets its self to its factory settings. The router will not let me maintain a secure network because of this. How do I make it so that all the settings that I set will stick?

View 2 Replies View Related

Laptop Cannot Maintain Strong Connection To Wireless

Sep 5, 2011

I mostly use my computer in my house, so I am not sure if it is a network problem, or something is wrong with my laptop, but I am having a lot of trouble maintaining a constant connection lately. Often times, I try to load a page and it says "connection reset" or whatever.I have a Dell Studio laptop with an Intel WiFi Link 5100 AGN wireless card. I am using the Broadcom Netlink driver along with Microsoft Miniport Adapter (all of this info came from my Device Manager). I'm running Windows 7 Home Premium 64-bit, 4GB RAM, Intel Core 2 Duo T6500 2.10 GHz, Service Pack 1.

View 10 Replies View Related

Switched To Comca And Now Can't Maintain Wifi Connection

May 30, 2012

So I recently had to get Comca$t xfinity cable internet due to Verizon Fios not being available in my new home.With Fios on my laptop, I didn't lose connection at all in 3 years.With Comca$t, I lose my wifi connection just about every other minute.It just keeps disconnecting and reconnecting.I'm running Vista.My Ipad is connected just fine and doesn't drop connection.This makes me think it has something to do with my laptop. They are the same distance from the wireless gateway.

View 11 Replies View Related

Aztech Wireless-N WL522USB - Cannot Maintain Connection

Oct 10, 2011

can't figure out what's killing my desktop's connection.I'm running Windows 6 Ultimate x64. I was using an Aztech Wireless-N WL522USB adaptor before, and it was working perfectly fine apart from the fact that it was a tad slow, which led me to buy a new Linksys AE1000 adaptor.I'm guessing I caused some kind of conflict, because after an hour or two of use (and after installation of the drivers), I started getting DRIVER_IRQL_NOT_LESS_OR_EQUAL BSODs, as well as my connection dying on me. I did not uninstall the drivers for the Aztech adaptor before installing the new one, and I have a feeling this might have something to do with it. Anyway, right now, I've switched back to the Aztech (intend to return the Linksys), and I'm still having connection problems. The tooltip of the wireless icon on the toolbar shows "No Network Access", while clicking on it shows "Limited Access". I have neither internet access nor local access to the router. The weird thing is that it works for a VERY short period of time after starting up, where I will have full internet access, and after which it will revert to the Limited Access state.

View 14 Replies View Related

DIR-815 Router Can't Seem To Maintain Constant Internet Connection?

May 7, 2012

I have a new DIR-815 router, with a network consisting of one HP desktop computer, one Sony VAIO laptop computer and one Samsung tablet computer.My problem is that I can't seem to maintain a constant internet connection requiring a new router setup at least once a week, sometimes more frequently.Also, even though the network I set up is called "HOME" my desktop, which is the computer connected to my cable provider, never shows any connection to that network. Both the laptop and the tablet connect to the :HOME" network while the desktop connects to something called "Network 5" which does not show up anywhere in my setup. As long as I have an Internet connection I really don't care what the connection is called, but I find it strange that I am connected to a network that apparently does not even exist

View 7 Replies View Related

Cisco VPN :: ASA 5505 VPN Concentrator To Maintain Connection With Remote Sites

Jul 11, 2011

I have been working with my ASA 5505 VPN Concentrator to maintain a connection with one of my remote sites.  I have several tunnels that work fine and dont have any issues at all, but one tunnel with outside IP ending in 146 and inside LAN 192.168.3.0 goes down every 24 hours.  Attached is the config from the concentrator.  I changed around the Security Association Lifetime Settings and the tunnel would drop after that amount of time expired.  If I set it to 24 hours, the tunnel would drop every 24 hours.  If I set it to 8 hours it would go down every 8 hours.
 
I have swapped the router a few times, double and triple checked my key settings, disabled keep alives on both ends, and this problem just started happening a few weeks ago after working fine for years.  I also get the following e-mail error every time it goes down:

<161>Jul 10 2011 16:19:47: %ASA-1-713900: Group = xxx.xxx.xxx.146, IP = xxx.xxx.xxx.146, construct_ipsec_delete(): No SPI to identify Phase 2 SA!

View 6 Replies View Related

LG LD550 TV Doesn't Maintain Wireless Connection To Internet

Aug 3, 2011

I recently purchased an LG 42" LD550 Flat Screen TV. This TV is supposed to wirelessly connect to the Internet in order to stream Netflix, YouTube, Vudu, etc. I've purchased and connected the required LG AN-WF100 USB Adapter (dongle). My desktop computer is a Dell Studio XPS 435T/9000. My router is a D-LINK WBR-1310.

The TV simply won't maintain a connection with my network. Sometimes it will find the network just fine for several days -- then it disappears (in the list of networks, only my neighbors' networks show up, not mine).

I follow the steps in the LG manual: I go to "Network" and select "Wireless"

It then shows the AP List. My AP (SSID) is almost NEVER listed, but when it occasionally is, I select it and type in my Security Key. It then proceeds to scan, and 95 percent of the time, it comes back with the error message, "Connection is Failed. Going Back to the List". The other 5 percent of the time, it ACTUALLY CONNECTS for a while (sometimes a few minutes, sometimes a few days). Then it disappears, and the whole cycle starts again

It's been a week now since I actually got connected! Is it the TV or the router? My router works with other devices (laptop, Nook eReader, second desktop computer), so it HAS to be set up right, doesn't it? The entire reason for buying the TV was so that I could wirelessly stream from the internet, and I feel cheated.

View 9 Replies View Related

Linksys Wireless Adapters :: DPC3825 Not Able To Maintain FTP Session?

Jan 6, 2013

I am trying to figure out whyt my DPC3825 does not maintain a FTP session I did not really want to post this message rather I am trying to figure out how to search this board.

View 1 Replies View Related

Cisco Firewall :: Using Object-Groups For Easy Maintain ASA 5520 Configurations

Sep 19, 2011

After reading the post titled "ASA 5520 nat access-list query for internet access" I realized the object-group command could and should be used to make a more efficient and cleaner configuration. My current environment is very small and straight forward consisting of one FTP server in the DMZ. Though the guide: [URL] is straight forward, my inexperience hinders me from seeing how to use the commands effectively. A summary of the configuration is at the bottom of this post
 
Question: How can I clean up my current configuration? I have two references to the same server, dmz-rdp and dmz-ftp, created for port forwarding ports 3389 and ftp through the outside interface. I can combine them into one object statement, right? for each port I want to forward through the outside interface?
 
object network dmz-rdp
host 10.10.10.4
nat (DMZ,outside) static interface service tcp 3389 3389

[Code]....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved