Cisco Infrastructure :: Multicast For Aironet 1310 WGB And 1242 AP?

Mar 15, 2011

I have configured a Aironet 1310 bridge as a WGB and is connected to a Aironet 1242AG AP wirelessly!A sensor(IP device) is wired into the 1310WGB. The sensor needs MULTICAST to operate!I checked the DETAILED STATUS of the RADIO and both the 1310 and 1242 are blocking multicast!The RELIABLE MULTICAST TO WGB option is enabled on the 1242AP already!

View 1 Replies


ADVERTISEMENT

Cisco Wireless :: Aironet 1310 - Infrastructure Access Point Unreachable For Management

Sep 16, 2010

We have 2 aironet 1310 aps setup as infrastructure access points between 2 buildings.  One went south on us & we placed it.  Before the bad one went down, we were able to manage both remotely & could see them from the next device via CDP.  Now, we can't connect or even ping either AP.  And the weird part is that the switches that connected to each can see each other via CDP, but not the access points between them.  I'm attaching the configuration.  Before I make the 2.5 hour drive back to the site, what I may have misconfigured on either or both access points?

View 3 Replies View Related

Cisco Wireless :: 1242 And 1310 Bridge?

Apr 18, 2011

Is it possible to make a bridge using a 1242 and a 1310? I have been able to get them to associate together and it appears it will function as a bridge. I have the 12(4) 253 JA IOS for both devices. I would like to use the g antenna on the 1242 for the bridge and the a antenna for wireless clients. The configuration on the web management appears to support bridge root and non root for both devices.

View 2 Replies View Related

Cisco Wireless :: Cannot Access GUI - Aironet 1310

Apr 29, 2013

I've got a Cisco Aironet LAP1310AG-A-K9 that I can't access through Internet Explorer or Firefox (multiple versions).  I set a static IP in DHCP, I can ping the unit, but I can't browse to the GUI.   

View 1 Replies View Related

Cisco Wireless :: IOS Image For Aironet 1310?

Apr 5, 2012

Any IOS image for the Aironet 1310? May I have a copy of it. I cant access to Cisco support today.

- C1310-k9w7-tar.124-25d.JA1.tar
- C1310-k9w7-tar.124-21a.JY.tar

View 2 Replies View Related

Cisco :: Bridge Link With Two Aironet 1242

Oct 23, 2012

I want to connect with wireless devices two buildings, one in front of another. Short distance (about 20 meters) and no obstacles. I have a couple of aironet 1242 and i was wondering if it would be possible to setup this link with this equipment.
 
could  WGB be the solution?

View 2 Replies View Related

Cisco Wireless :: Convert Aironet 1310 Autonomous To LAP?

Apr 22, 2012

Is it possible to also upgrade the 1310 series cisco ap's from  autonomous to lwap without using the upgrade tool, if so what procedure  do I follow? The upgrade tool required to have telnet enable on the controller which I can't break the policy

View 1 Replies View Related

Cisco Wireless :: Can The Aironet 1310 Setup As A Repeater

Jul 10, 2012

Can the Aironet 1310 setup as a repeater? I could not make the AP as the repeater associated to another 1310 ap. This AP is running LADAP.

View 11 Replies View Related

Cisco Wireless :: Aironet 1310 Bridge - Cannot Access GUI To Configure

Nov 21, 2011

I have a pair of Aironet 1310's I am needing to bridge. I have used the CLI to configure the BVI1 with the ip address and verified it. I then tried to access the GUI to configure the device via Internet Explorer and it would not provide access. I read that it had to be older versions of IE but my OS will not support older versions. I then downloaded Netsace Navigator 7.01 as indicated, but still did not get access.
 
Then I thought maybe if I can access the GUIvia the IPSU tool but I have Googled the Cisco IPSU and cannot find a downloadable link.

View 3 Replies View Related

Cisco Wireless :: Aironet 1310 - Outdoor Access Point

Sep 13, 2012

I am looking at outdoor access points, I want to stick with Cisco aironet, we currently have 6 of them that are 6 years old and running great, one has had a problem because of humidity, dried it out and relocated and we are good again.
 
I was looking at the Aironet 1310 Outdoor access point, but I can't find much information on it.  I am looking to see how many SSIDs can be setup, we currently have 2 one private, and one public, this is done with VLANS.  I am also looking at finding out about the power injector, it converts to coaxial cable, it has 2 RJ-45 and 2 Coaxial, does this mean if we get 2 access points, then I only need 1 power injector?

View 1 Replies View Related

Cisco Wireless :: Can Connect Various Aironet 1242 To 2500 Controller

Dec 5, 2012

Can I connect various Aironet 1242 to Wireless controller 2500?

View 4 Replies View Related

Cisco Wireless :: Aironet 1242 G - Disappointing Antenna Signal

Jan 13, 2013

I have a Cisco Aironet 1242G and an outdoor omni 12 dbi antenna. I hooked it all up to day  (antenna is connected with a 100ft cable). My signal is very disappointing. I have it behind a garage and can only get about maybe 75 foot away and the signal gets very weak.
 
Is there something that needs to be configured in the aironet? I have enabled external antenna and played with the settings. Is the 12 dbi antenna just too much?

View 1 Replies View Related

Cisco Wireless :: Aironet 1242 - Connect To DSL Using Static Public IP

May 21, 2013

I have an aironet 1242, It must be connect to an DSL using a static Public IP, and this AP must provide dhcp services, how to configure this access point in order to be connected to Internet using Public IP and provide dhcp service.

View 4 Replies View Related

Cisco Wireless :: Aironet 1310 - Password Reset With Previous Settings

Feb 11, 2009

I got 4 aironet 1310 Πbut i don't have password into Enable mode!. I follow this document "Password Recovery Procedure for the Cisco Aironet Equipment.pdf" to recovery password. It succeed reset password to default Πbut it also reset Previous setting to default.
 
Can I reset aironet 1310 password and keep Previous setting?

View 3 Replies View Related

Cisco Wireless :: Aironet 1310 Bridge High Retries One Direction

Aug 15, 2011

We are experiencing a high amount of retries in one direction between two 1310 bridges with external yagi antennas.  What would this indicate?  Here is a copy of the linktest:
 
POOR (102% retries)  Time   Strength(dBm)   SNR      SNR          Retries
msec      In     Out    In      Out         In   Out
Sent :5000, Avg   5    - 66    - 64    31       45   Tot:  56  10149

[Code]....

View 2 Replies View Related

Cisco Infrastructure :: Multicast 224.0.1 Traffic Increased Much

Mar 24, 2013

I have started to notice an increase in traffic from all my LAN workstations to the multicast address of 224.0.1.20, all with the same destination port (79). IANA shows this address as reserved for "experimental testing". Are there any typical applications or protocols that use this multicast address? My first thought was malware running on the hosts but it's a little tricky to prove.

View 5 Replies View Related

Cisco Infrastructure :: Configuring Multicast Environment Using 2 Ports On 3560

Feb 28, 2006

Ihave a 3560 w/multicast support and I'm trying to configure a simple environment. I have 2 ports configured, one for the multicast server and the other for the client. Each are on their own subnet, so I have an ip route between the two. My run config on both ports is:

ip multicast-routing distributed
interface fastethernet 0/3 & 0/4
ip pim version 2
ip pim sparse-dense-mode
 
I'm using vlc server /client configured to use 224.0.0.1 on my isolated network. I can see the mulitcast traffic going into the port, and I the client is sending reports, but I think the 3560 is dropping the packets, since I don't see them coming in the client port. Need to configure a simple multicast environment using 2 ports on a Cisco 3560.

View 4 Replies View Related

Cisco Infrastructure :: 5513 - Invalid Traffic From Multicast Source Address

Feb 8, 2006

One of our Cat5513 has been displaying a lot of the error message below:
 
%SYS-4-P2_WARN: 8/Invalid traffic from multicast source address 01:00:5a:52:4c:4d on port 8/58
 
The frequency of this is quite disturbing. What this error is about? Module no.8 is our Gigabit Ethernet WS-X5410. Can that multicast address be mapped to an IP address or unicast mac-addresS? How can i go about resolving this?

View 5 Replies View Related

Cisco Infrastructure :: Setting Up Two SSIDs On Aironet 1240AG AP

Aug 17, 2011

I have a Aironet 1240AG and have our main SSID set up on Radio0-802.11G. It uses WPA TKIP. Everything works fine on it. Recently we have been getting a lot of visitors who need wireless access, so reather than hand out our main key to visitors, I decided to create another SSID on Radio1-802.11A for guests. For some reason the new SSID does not show up on the available networks on client devices. You can connect to it manually by entering the name and key. But how do I get the SSID to broadcast on the 2nd SSID. A lot of these guests are not very computer smart, so it becomes a real pain to have to walk them through connecting to the guest network.

View 3 Replies View Related

Cisco :: MP-BGP (and Not BGP) To Exchange Multicast Prefixes Between Multicast Domains?

Apr 18, 2012

Why do we need MP-BGP (and not BGP) to exchange multicast prefixes between multicast domains?

View 2 Replies View Related

Cisco WAN :: Multicast Routing Between Vrf (Cat 3750) - Multicast Vpn Extranet?

Feb 19, 2013

I try to pass multicast traffic between two vrf on the same 3750 switch. I have IP services IOS and sdm template routing.
 
here is my config:
 
ip routing
!
ip vrf vpn2
rd 1:1
mdt default 232.1.1.1
route-target export 1:1
route-target import 1:1

[code]....
 
Now I'm stuck - I don't know what to do to pass multicast traffic. Do I have any chance to run this config on 3750 chassis?Perhaps "Configuring Multicast VPN Extranet Support" document will be useful, but it concerns Catalyst 6500? [URL]

View 0 Replies View Related

Cisco :: AP 1242 Is Falling

Aug 29, 2011

It was installed an AP 1522 as RAP, in a mesh network composed for AP's 1242.At the time that AP is connected on the network,  all other APs 1242 fell.

View 5 Replies View Related

Cisco :: 1310 AP No Longer Supported On WCS 7.2

Jun 19, 2012

After upgrading to 7.2 on my 5508 WCS, the 1310 APs will no longer join. After a call to TAC they said the 1300 and 1400 APs are no longer supported on WCS. Is there any plan to add them back as supported in future releases?I was thinking I could downgrade my backup 5508 and change the APs to autonomous. Or is there some easier way to make them autonomous?
 
Also, as a low cost outdoor AP, I guess I am reduced to putting 1262s in a NEMA box with outdoor antennas. The 1552s are way too expensive for the quantity I need. Is there some other inexpensive outdoor AP that will replace 1300-1400 series?

View 6 Replies View Related

Cisco Wireless :: Configuring WDS With 1242 APs

Dec 26, 2011

I'm using two cisco 1242 AG access points to configure WDS feature. I've named the accesspoints as AP1(acts as WDS) and AP2. Since I've only two accesspoints, I've configured the AP1 to act both as a WDS and as a regular accesspoints.Further I'm using the local radius server within the AP1 to authenticate both clients and infrastructure accesspoints. And both APs are connected to a router (which act as a dhcp server) via a unmanageble switch and both accesspoints are getting registered with WDS.But the issue is when I tried to connect to the configured SSID, it promts me a "authentication window" but after entering the configured username and password, i'm not getting authenticated by the AP.

I've attached the configurations of both APs to for your reference and I've used the following cisco document as a guideline to crate the WDS. [code]

View 3 Replies View Related

Cisco :: 1242 AG To Manage Via Snmp

Apr 10, 2012

Setting up SNMP on my Cisco AP's (1242AG Lightweight). How do I manage these via SNMP? It doesn't appear there is any settings within each AP for SNMP but only on the 4400 controller. What I am trying to do is setup Solarwinds Alerts, so when an AP goes down, I get notified of it. How or where this gets setup on the 4400 or the AP. I'm guessing there is something probably on the 4400 that I setup.

View 3 Replies View Related

Cisco Wireless :: Ap 1242 Need To Reset AP

Mar 4, 2013

I'm having a little issue with some Cisco Aironet1242ag WAP's. I receive a call at least twice a month stating that some of the WAP's are not giving out internet connection. What I always do is go to my patch panel and disconnect those WAP's not working and connect them back again so they can power cycle. These WAP's are connected to a Cisco3750g. Once the WAP's boot up, the users can connect to the WAP and connect to the internet.
 
I don't know if these WAP's are filling up with some information that causes the access points to not connect to the WAN.

View 15 Replies View Related

Cisco :: 1242 Autonomous And / Or Lightweight

Jan 17, 2011

I have some 1242s and I can't get a straight answer on whether they can do both autonomous and lightweight or just lightweight.

Model number:  AIR-LAP1242AG-A-K9.
 
I'm assuming that the 'L' in the model numbers means it's just lightweight, but searching Cisco's site and the Internet in general it's just not clear.
 
I know it works as a lightweight AP, can I run it in autonomous mode?

View 3 Replies View Related

Cisco Wireless :: Using VLANs With 1310 Bridge

Dec 18, 2012

I am trying to setup a wireless link between two locations, and be able to pass VLANs through the Wireless link.Currently I have two 1310 bridges.I followed the information at url..., but it is only passing VLAN 1 across the link. I cannot figure what the problem is.Both Bridges are running c1310-k9w7-mx.123-8.JEA3. [code]

View 4 Replies View Related

Cisco Wireless :: AP 1310 Not Able To Join Controller

May 20, 2013

i converted the C1310 to LAP using upgrade tool. but the AP is not able to join the controller i was not able to view SHA Key in upgrade tool, so i ran the "debug pm pki enable " on the controler to get it. i'm still not able to view SHA key.
 
here is the output of debug command
  
*spamApTask0: May 21 15:07:43.527: 88:43:e1:d1:fc:9e Received LWAPP JOIN REQUEST from AP 88:43:e1:d1:fc:9e to cc:ef:48:b3:23:ef on port '13'
*spamApTask0: May 21 15:07:43.549: sshpmGetIssuerHandles: locking ca cert table

[Code].....

View 3 Replies View Related

Cisco Wireless :: 1310 / Manually Configuring The LAP?

Apr 15, 2012

I have an access point 1310. I want to add to the WLC as an access point. It have been configured with IP address correctly and the radio interface is up. I need to add it to the WLC as CAPWAP.

View 5 Replies View Related

Cisco Wireless :: 1310 Ap WPA2 Configuration

Jul 26, 2011

I am looking for an example configuration of a Cisco 1310 running 123-7.JA2 Z Ios, for Wpa2 using an external Cisco acs radius server.

View 3 Replies View Related

Cisco Wireless :: 1310 Autonomous To LAP Conversion

Oct 22, 2012

Customer of mine has 20 AP AIR-BR1310G-E-K9. No controller installed. He use them as Autonomous AP.
 
Right now ##he wants indroduce a WLC. Due to that every single AP must be converted in LAP AP.
  
is this action free of charge ? Nedd I SMARTENT COVERAGE ?

View 3 Replies View Related

Cisco :: 1310 - 802.1x Authentication Fail Through WLC But OK On Autonomous APs

Jun 5, 2013

I migrate 1310 APs from Autonomous to Lightweight. Migration is OK with Cisco Upgrade Tool, and AP are registered on my 2504 WLC.
 
Previously, a 802.1x network was broadcasted by autonomous APs, supplicants were identified on a freeradius server with MSCHAPv2/PEAP method.
 
But on the WLC, supplicants can't auth on Radius server.I configured a WLAN with WPA/TKIP/802.1x with my radius server in AAA tab.When clients try to authenticate, I get these messages where xxx is login:

-AAA Authentication Failure for UserName:821 User Type: WLAN USER
-AAA Authentication Failure for UserName:200 User Type: WLAN USER
-AAA Authentication Failure for UserName:209 User Type: WLAN USER
 
Security info on client page is:

Security Policy CompletedNo ###Policy TypeWPA###Encryption CipherTKIP-MIC###EAP TypePEAPSNMP NAC State Access ###Radius NAC State8021X_REQD .

What is strange, there are some clients which are OK in RUN State, and 50 other % which are not.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved