Cisco :: LMS 4.1 Freezes After About 10 Min Of Being Idle
Jun 11, 2012
We have LMS 4.1 installed. After about 10 min of being idle, the browser becomes frozen, eventually crashing it. We applied this fix for lagging hoping it would fix the issue, however it has not. We have been tracking a problem internally where the Getting Started page hangs on login. The problem is with changes to Cisco.com access. We are actively working to get those fixed, but if this is what you're seeing the workaround is as follows:
a. Open the properties file name “gs.properties” under the path NMSROOT/MDC/tomcat/webapps/cwlms/WEB-INF/classes/com/cisco/nm/gs/ui
b. Update the field IS_DEFAULT_PAGE as “false”
c. Clear the browser cache and login-in(Daemon restart not required)
I'm using a Cisco ASA 5520 with IOS 8.2.2. We have many remote users using the Cisco VPN client, but I have been asked can we logout idle users as we do hit our license limit and some users stay conenct for days.
When i check the status of my Internet Connection I notice that the sent and received bytes keeps increasing. I'm sure there are no downloads taking place that I'm aware of. No torrent clients, no antivirus nothing. I checked my PC for malware but that didn't work. As a result of this, i keep getting high pings in online games and can't even watch videos in youtube anymore. like, some software to monitor all the programs that use the itnernet connection without my knowledge or something??My primary concern is gaming (Call of Duty 4) so I wouldn't mind this idle downloading (whatever it is) as long as the major chunk of my internet connection is directed towards Cod4!
I need to find a way to PERMANENTLY disable the network adapter from turning off to save power. Its this setting here. Uploaded with ImageShack.us Every time I restart the computer it rechecks that box. I manage an office with about 10 computers and this power saving feature is making the software they use very unstable.
This has been happening of late. When i check the status of my connection, i notice that the "sent" and "received" bytes keeps on increasing when i'm idle. I'm pretty much sure there's no downloading of any sort in progress that I'm aware of. As a result of this, I can't watch videos in Youtube or play online games due to high ping.
LAN connection gets disabled by itself on idle. Sometimes BSODs.A few days ago I tried connecting a MBlaze modem to my laptop (Windows 7 Ultimate 32 bit) to access internet. But it resulted in instant BSOD everytime.I deleted the modem software after that & didn't try to connect it again.But now, whenever I connect using my LAN broadband, connection works fine as long as I am continuously browsing something. But as soon as I stop browsing and it goes in idle mode in about 10-15 minutes, the connection gets disconnected. In the adapter properties, it shows that the driver is working properly. If I try to disable or uninstall it it doesn't give a response. The only solution to this is a forced shutdown & restart, after which it works fine untill not idle. I am not able to download anything because of this.I tried many things like reinstalling the network adapter driver, unchecking the power management feature, resetting the connection, etc. but nothing is working.
I recently started having trouble with my VPN clients loosing connection.I can create the conenction, work with it for a while, and then loose connectivity.Timing seems to be dependent on the activity over the connection.More activity, the conenction stops working sooner.
The cleint doesn't disconnect, I just can't access anything from the client.Disconnecting and reconnecting the client fixes the problem, temporarily depending on how much data I'm transferring.This works 90% of the time.The other 10% if I wait 30-45 minutes, and try again.. It works...with the same results...
It was originally isolated to a Win 2003 server that I was using as the client.It is now happening on my Win XP client as well.I'm using the AnyConnect client ver. 2.5.2014 with the VPN service on the UC520.Which I beleive, is similar to the ASA 5500 series VPN device.I am running ver 8.1.0 on the UC 520, and I can't remember if this started after upgrading to the new software.
We are using the cisco sa540 router and shrew VPN to connect to our buiness network, mostly to connect to the workstations with RDP. Now we wonder if it posible that the connection will disconnect automaticly after an idle time of for example 30 minutes. And if so, how can i configure it?
I have a problem where the complete home network disconnects whenever my computer reboots from idle state (either after leaving it for a while so it goes on sleep, or by putting it on sleep mode). It then takes a few (long) minutes for the network, and the internet access to it to reconnect. In the meantime ALL devices in the house (other laptops, ipads etc) lose connection too. It's only my computer which does this, so i'm assuming that there's something wrong with the settings on computer.
Is it possible to rename the default webauthentication URL from [URL] to something like [URL]. We are running on 184.108.40.206, is it possible to do http for web authentication and https for Mgmt access if we upgrade the controller software?
We configured our guest wireless with no layer 2 authetication so users can associate with an AP and get an ip adress but they can't go anywhere unless they have a valid username and password(web authentication) - does this affect the performance of an AP since there will be many people associated with each AP, is there any setting in the WLC to de associate a client from an AP if its idle for certain time.
I have ASA 5510 with 8.2.4 and 8.0.x OS and all seem to have common problem of idle TCP connections not timing out. The host to host connections are coming over VPN tunnels. I have default timeouts on all the firewalls. I have tried changing global timeouts and as well as host specific timeouts using MPF but doesn't work at all ! The problem is when TCP connections are sitting idle in conn table for days and when connection limit of 50,000 conns reach the firewall starts behaving unpredictably dropping packets or unresponsive! I need the unused idle connections to timeout which is NOT happening either by changing global values or MPF.
I have set up 2 RV110w firewall/vpn/routers at remote locations and an ipsec tunnel between them. Once the tunnel gets established everything works fine until it has been idle for some arbitrary amount of time. (Maybe a half hour or less.) at which point we lose server access and can no longer ping across the tunnel. To fix this I have had to dissconnect and reopen the tunnel again, I even went so far as to install an autopinger on the remote end to keep traffic on the tunnel which seems to work but is not going to be a viable long term solution.
If i set up a pptp vpn between a Cisco rv082 router and a microsoft client,Can i set the client idle timeout someway? or Have a default value pre- configured for this?Because this device support 5 users to connect at the same time. It would be best for me, if the device drop the client if it does not use the tunel.
How can i prevent my Vodafone usb stick device to enter in 3G mode when the network is very low usage or not at all. If i open google for example, it turns automatically on HSUPA mode with a better speed, but if im doing nothing after 1min or so it goes back on 3G more slower speed. So the 3G / HSUPA mode is auto switched depending on demand based on how much speed is needed at that moment. I am playing an online game and the network usage by the game when im inside playing it, is not in that range to trigger the HSUPA mode, and just stay in 3G causing me to have lots of lag, is there a workaround for this so when im playing the game to be connected with HSUPA instead of 3G? ( i was thinking about some kinda of slow trafic generator that generates a litle trafic continuously to trigger that HSUPA mode while im playing, but not sure if is possible and also not too much to affect my conection speed which is slow anyway on a mobile) You can see in the picture, the ping on google while its both modes, as u can see 3-5times ping increase while its on 3G. [URL]
On the modem page with all the settings Under basic settings For connection it says Always Connected The box underneath says idle timeout 5 (that's in minutes)
I am unable to change that number or even get a cursor to appear in that box (I want to change it to a 0 - my internet connection has been dropping out when going idle). I can't right click or anything. That is using Firefox. When I say dropping out, I mean, the 3 computers on the network become unuseable - nothing works and things don't appear to be connected to the internet even though my green ADSL light stays on like it's connected - it is not.
I tried the same modem page in IE, and that box with the 5 in it is still showing 5, but this time it's just grayed out - again, can't be changed. The firmware updates are all upto date (apparently - according to it's check)
My XP Pro SP3 PC is connected to a Netgear DG834N modem/router via Ethernet. If the PC is left for say 4-5 hours the ability to connect to websites disappears. The browser just hangs and it's the same with IE and Firefox The odd thing is I can still ping websites by domain name without trouble. So the interenet connection is actually still in place.The problem is consistent and repeatable.Throughout this I have a second XP Pro SP3 PC also connected to the router via Ethernet and it works perfectly.
We have a new stack of two Catalyst 3850-48T's running IOS XE 3.02.00 (we are upgrading to 3.02.01 this weekend.)We noticed the CPU usage is around 30% even when there is almost no traffic going through the switch. We haven't seen any indication that it is causing a problem, but is this considered a normal baseline?I attached my config (with passwords sanitized,) show ver, show controllers utilization, and show process cpu history.
I noticed this behavior is normal on 2900XL/3500XL switches, but I didn't find anything relating it to 3850 switches. Does the same thing apply to the 3850 switches? [code] url...
I have a CSS 11503 with a basic content rule for TCP 10000 going to a few backend servers. I was looking into the default timeout values for flows and when testing using telnet the flow didn't terminate as expected?
For example, i have no 'timeout multiplier' specified in the config and when i look at the output of 'show flow-timeout default' it tells me the default 16 seconds timeout is in effect for *. With that in mind, i telnet to the content rule vip on TCP 10000 and on the backend server using wireshark i can see the TCP threeway handshake. With no data passing i'd expect the CSS to terminate this flow after 16 seconds.. yet it takes exactly 128 seconds before wireshark shows the RST and the flow is terminated. 128 being 8 times the default 16 second flow timeout.
If i try to force the connection to close early by specifiying 'flow-timeout-multiplier 2' in the content rule, or even a multiplier of 40, it still waits 128 seconds to close the telnet connection.
I am looking for the way to define an idle timeout for specific flows on an ASA5580 by using Cisco security manager. For ex I needed to define a specific idle timeout for connections beetween specific devices (Devices in vlan1, Device2 in vlan2).To test it I did following changes by CLI and it works fine. access-list L1 extended permit ip <@IP1> <mask1> host <@IP2> class-map CM1 match access-list L1 policy-map PM1 class CM1 set connection timeout idle 02:00:00
I try do do the same configuration with CSM in order to be able to manage each changes only by using CSM.So I defined Access control list, Traffic flow and then I define timeout in CSM --> PIX/ASA/FWSM Platform --> Service Policy Rules --> IPS, QoS and Connections Rules -> connections settings -> Traffic flow idle time-out. The problem is that each time I deploy the configuration with CSM I loose the timeout config line which is the most important for my application..
I have an SG300-20 here for testing (firmware: 220.127.116.11, boot version: 18.104.22.168, language version: 22.214.171.124 English). Everything seems to work on it, except, that if I choose Radius authentication by mac address only, then the switch does not honor the Idle-Timeout and Session-Timeout attributes from the Radius server (freeradius).
The setup is the following: I have a no name access point plugged in to switch port gi1. The port gi1 is set up for Radius authentication by mac address only. The access point itself is authenticated, no problem with that. If I connect through the access point by (say) a mobile phone, it is authenticated, no problem. The radius server does send the Idle-Timeout and Session-Timeout attributes, I checked it by running "freeradius -X", both are set to 30 seconds. Then I turn off the wireless card in my mobile phone and check the dot1x users by "show dot1x users". My mobile phone's mac address remains there for 5-10 minutes, so the Idle-Timeout and Session-Timeout does not work.
Another way I could resolv this problem is by explicitely asking the switch to reauthenticate the user. Unfortunately there is no CLI command to do just that, I can do however a reauthentication on a port using "dot1x re-authenticate gi1" (for example). But it does not work as it is expected: the switch uses the stored mac-address to reauthenticate the user, so nothing changes on the port (unless something changes in the radius server). I think it should work like the following: remove the authenticated user from the port, and whenever that mac address makes some network traffic, then reauthenticate as if it were a completely new connection. BTW: it would work for me also if I could just remove an authenticated user from a port, but I did not find a command to do that.
As a last resort I can simply shutdown the port, bring it up again ("shutdown" and "no shutdown" in the interface config), then all users are removed from the port and they all mush reauthenticate. But it causes a network outage for a couple of seconds for all users on that port, on a busy access point it is quite disturbing, and it is not an elegant way to do this.
So my actual question is: is there a way to remove an authenticated user either automatically (Idle-Timeout and Session-Timeout) or manually from this switch?
I enclose the relevant part of the running config.
My new EA 2700 disconnects from the internet if the desktop is idle for more than 30 minutes. needs to be unplugged for a few minutes then it will reconnect. This is an unacceptable situation and this thing will be tossed if it cannot be fixed. Can this be reset so it won't disconnect? or do I need to replace it with a product from another company?
Not sure where the best place to drop this question. It is a DIR-601 router. I have it configured in the virtual servers list as; internal system ip, public port/private port both 23, protocal tcp with inbound filter, allow all and schedule set to always. I have a second system with a different public port. I can connect to either one but after a short amount of idle time it appears to just drop the connection.
My macbook keeps loosing it's wireless connection after being idle, when I start up I have to find my router and highlight it and connect and if it's idle it losers it's connection all the time.I tried resetting the router to default and started over I also tried every imaginable way of saving my password and connection but I can't find a way I've been into the routers security,trouble shooting,wireless, what's not holding it's connection to my MACBOOK? my iphone 5, ipad, and roku all hold
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 2006 by cisco Systems, Inc.Socket jumper: not present Failsafe jumper: present = normalFPGA revision 0x00000026C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : #################################################################################################################################### [OK] %ERR-1-SRAM: Bus error on SRAM interface%ERR-1-FATAL: Fatal error interrupt, No reloadingerr_stat=0x80, err_enable=0xFF, mgmt_event=0x10
System bridge dump: PCI B:3 D:0 F:0 Reg:0x00: device and vendor id = 0x648511ABPCI B:3 D:0 F:0 Reg:0x04: status and command = 0x02B00000PCI B:3 D:0 F:0 Reg:0x08: class code and rev id = 0x05800004PCI B:3 D:0 F:0 Reg:0x0C: hdr type, lat timer and cls = 0x80804000PCI B:3 D:0 F:0 Reg:0x10: PCI CSN0 BAR (LOW) =
My laptop runs fine with a wireless connection (lynksys router) but when I plug in the LAN it becomes unstable and eventualy freezes all together. I have tried bypassing the router and going straight from the modem (ADSL) with the same result. I have disabled all network connections and started a new one and I managed to get a days work out of it before the problem came back. The connection seems to be ok some times as long as there are no major demands put on it (but freezes as soon as you step it up a bit) and other times it freezes before windows even loads.
I am having some problems with WRVS4400N v2.We use it just for wired network (wireless is not in use, but it is configured). As a WAN we use PPPoE. Most machines do not use DHCP.After a while (few hours to few days after power up) the router freezes and it is not accessible. I cannot ping it or access to the admin page.I have the latest firmware version (V1.00.09-ETSI)I also called service and they suggested to reset it to factory settings and reconfigure it.