Cisco Routers :: Acceptable Number Of Wireless Connections To WRVS4400N?
May 1, 2013
What would be an acceptable number of wireless connections to a WRVS4400N router? I'm working in the IT department for a new company, and one of the offices complains that using VoIP and doing large file transfers are constantly a problem. They are all connecting wirelessly to the WRVS4400N. I managed to vpn in and connect to the web interface of the router, and it shows that there are 30 devices connected wirelessly to it. However, when people plug into the wall jack VoIP and data seem to work fine.I can't find any info on what a best practice would be for number of wireless connections to the router. There's no Vlans setup on it from what I can tell, so that may be my next step, to separate data and voice traffic.
View 2 Replies
ADVERTISEMENT
Jan 10, 2012
Since the change from TeamViewer 6.x to TeamViewer 7.x my router's (WRVS4400N V1.1, latest firmware V1.1.13-ETSI from 2009-02-24 and latest IPS definitions 1.50 from 2011-08-09) IPS blocks its connections to my remotely supported computers claiming a "P2P Vagaa connection attempt - 2". This is not happening with TV 6.x.Who does the error, TeamViewer or Cisco?
View 4 Replies
View Related
Jul 2, 2012
I have a BT Home Hub 3 and quite often get messages "cannot connect to network". I have many (>20) devices connected. Have I reached the limit? With four kids in the house the pressure to connect even more devices is growing.
View 1 Replies
View Related
Apr 16, 2007
What is the maximum number concurrent wireless connections that a WAP54g v3 can have?
View 9 Replies
View Related
May 14, 2012
We are planing on offering low end ASA 5505s as a customer offer to connect their network to our cloud as this is a business requirment. However, one of my colleagues is convinced that the license for the 5505 is *not* based ont he number of IPSEC endpoints, but the number of distince connections via *any* tunnel. So, according to him, if you have a license for 10 IPSEC endpoints, if you have 11 people connecting via *one* tunnel from a customer's network to our cloud, you go beyond your license.
View 1 Replies
View Related
Nov 29, 2011
I have a cisco 5520 running as IPsec concentrator. On the ASDM homepage is shows like 31 VPN connected. But if I go to Monitor > VPN is show only 18. Then if I use SSH using sh crypto command it shows the same number as on the Monitor > VPN sections. I am running 8.3(1) and ASDM 6.3(1).
View 8 Replies
View Related
Apr 7, 2011
We are having random issues of users not being able to connect to our wireless network consistently. The users will have successfully accessed the network previously but then will have difficulty associating to the network. After a period of time, the association appears successful again. My first thoughts were that there was a restriction on the number of clients that could associate to a given AP at any one time.This is the equipment we have:1x Cisco Wireless Control Server (WCS) 6.0.181.04x Cisco 5508 Wireless LAN Controllers 6.0.196.060x Aironet 1142N Lightweight Access Points (LAP) Is there a hard or recommended maximum number of clients per LAP? If so, where is this defined? From what I have read on these forums, Cisco apparently recommends about 25 clients per AP but I can not find any official documentation to support this.When I go to WCS Home > General > Top APs by Client Count, the top AP reports 20 clients. However, if I click on the AP Name and go to the Current Associated Clients tab, it is only listing 8 clients - why is this?
View 3 Replies
View Related
Apr 12, 2011
On my Pix515E ASDM console I quite often see large surges in the total number of connections. I would like to find a convenient way to see what (or who) is causing this.
The command Show Local gives the answers but it returns details of each connection and I can't see a way to omit the detail. Show Conn Count just gives the total. Ideally I would like to get a summary of the number of connections (TCP/UDP) for each inside host.
On a related matter I have used........
static (inside,outside) 12.34.56.00 2.34.56.00 netmask 255.255.255.0 tcp 400 100 udp 200 ..........to limit the number of connections to a subnet.This works and I see errors in the syslog when the limit is exceeded but when I change the limits and apply the changes, the syslog errors still show the previous limit being reached. How can I make changes to these connection limits take effect (without reloading the Pix)?
View 3 Replies
View Related
Apr 9, 2012
The address of my server, as a url, not the IP Address. I already have that, and how to find the number of connections allowed by my provider, which is clearwire.
View 8 Replies
View Related
Jan 11, 2012
Is there a maximum number of licenses for connections to a 877?The reason I ask is that our routers are managed by a datacentre and when I asked for the login details I was told that I couldnt have them due to licensing reasons with no other explanation.
View 1 Replies
View Related
May 18, 2011
I have a hub and spoke network with over 100 remote sites that connect to me via ipsec vpn. One of these locations, the only one using FIOS coincidently, is initiating 200+ tunnels back to my side which is causing saturation issues on my DS3. (I can post config if requested), and how can I limit the number of active tunnels it's establishing?
View 1 Replies
View Related
Feb 19, 2012
I find myself having to venture out into the realm of wireless (I'm more of a UC/DC engineer...) and i've got a problem i'm trying to track down. Installed two WLC 5508s, WCS, 3502i APs (123 of them...) in a 4-floor high school. What i'm finding is lousy throughput from a lab of PCs with little USB b/g/n adapters. I took my Macbook in and ran iStumbler to get an idea of the SNR but honestly, i'm not sure what i'm looking for.
For the particular room/SSID/band that i was looking at, i found that in the 2.4 range, i was getting 53% signal strength and about 16% noise. Is that a good level? In WCS, i can see close to a dozen APs in relation to the AP in question, so i'm wondering if the SNR is too high..
View 15 Replies
View Related
Jun 17, 2012
I have a client devices constantly sending data (~ 13 kb per second) to a server through a Cisco AP1241AG (802.11g).I use Iperf to test throughput, but I am having a difficult time determining what an acceptable throughput rate would be.I know in "theory" the best throughput rate I could get is 54 Mbps, but since my client devices only send 13 kbps is 1 Mbps more than enough? or is 13 kbps the low limit for my throughput test?
View 1 Replies
View Related
Jan 6, 2012
I have installed a WRVS4400N router in a client's office. When laptops are plugged into the router everything works fine. When they are attached via the wireless signal it drops frequently. WPA personal is being used to encrypt. I have also installed the latest firmware and am having the same results. What can be done to eliminate the drops?
View 10 Replies
View Related
Aug 19, 2012
I have an ongoing problem with my WRVS4400N router. It reboots on it's own when streaming video through a wireless connection (computer, xbox, roku, tv). Once I make a wired conection, it performs flawlessly. The firmware is up to date. I have read some reviews of this router on Amazon stating the same problem, but I expected it to be solved with firmware update. Unfortunately, this was not the case.
View 4 Replies
View Related
Jun 2, 2013
I need trouble-shooting wireless network connectivity issues that arose recently:We use a Comcast modem and two WRVS4400N's as wireless routers/wireless access points.We recently got our comcast service upgraded to 100/20 and also got rid of our static ip address. As a result (I think there must be a sort of causal relationship here, but I'm not sure what it is) we can no longer connect to the internet using our wireless networks. We can connect to the wireless network, but have "No Internet Access."
View 4 Replies
View Related
Jul 17, 2011
I have several wired and wireless devices connected to the router which is running the latest firmware (2.0.2.1) and I have this issue with all wireless devices. The router is configured for B/G/N Mixed, Channel 6, and to broadcast the SSID. Security Mode is WPA2-Personal w/ key renewal set to 3600. Connection control is configured to allow only the desired MAC addresses. All wireless clients are configured for DHCP (as are some of the wired clients that do not have this issue). I have tried various setting changes over time, none of which have resolved the issue.
What I have determined, and may be useful, is that each time this occurs I am unable to ping the router from the client and have no connectivity to the internet or other devices on the network. If I ping the WAP address (reserved for internal use address) I get a response and then connectivity is always restored after doing so. In other words, I ping 192.168.1.1 and get no response, immediately ping 192.168.1.2 and get a response, then immediately ping 192.168.1.1 and now get a response and connectivity is restored. If I skip the first step and just ping the reserved address followed by the router address result is always the same. It would appear the issue is between the the two router addresses.
Prior to owning this router I had a Linksys BEFSX41 that I had for about 7-8 years and a WAP54G I had for about 5, both of which still worked and I never had this issue with my wireless clients. I went to this router for the increased performance and am very happy with that aspect, however this issue is unacceptable.
View 6 Replies
View Related
Jan 27, 2013
We have an office with about 10 PCs, and several other network devices (smartphones, printers, etc). Some PCs and printers are wired, some are not. About two weeks ago, some (6) of the wireless devices lost connectivity. Since then, some (4) of the devices have also recovered normal connectivity.
As of right now, there are two computers, a laptop and a desktop, that cannot use the wireless network. They see the wireless network, connect to it, receive an IP via DHCP properly, have correct DNS servers listed in ipconfig, but they can't ping the router, use the intranet, or internet.
View 1 Replies
View Related
Jul 18, 2012
I recently purchased a WRVS4400N security router and have got a strange problem with it. I set it up as my main router and connected two computers (a desktop and a server) using DHCP. They both work fine, internet is as fast as it should be, no problems whatsoever. However, when I setup the Wifi SSID (whatever security options I use, same with open/wpa/wpa2) and connect my laptop to it. It is allocated a IP address and windows even says that there is an internet connection. As soon as I try to do anything though, I am dropped. Try to ping an outside server, failure and dropped. Open IE, failure and dropped. I cannot even access my local server connected by wire to the router.If I connect the laptop via a cable to the router everything works, and it continues to work when I unplug it. So this means that right now I walk over to the router and plug my laptop in for 3 seconds before I unplug it and then use the wifi for a couple of hours without any problem. But as soon as I try to turn on my wireless Logitech SqueezeBox or wireless printer, they fail and take my laptop with it..
I have:reset the router, used both firmware 2.0.2.1 and 2.0.1.3 and done a factory reset.Tried to move the router close to the laptop, no difference.
View 4 Replies
View Related
Apr 16, 2012
I see a lots of problem associated with wirless connectivity with WRVS4400N, with following config
Firmware version - Firmware Version: V1.1.13
Wireless connectivity - G/N Mixed
Auth - WPA2 AES
Everything else default and AUTO,
Problem:The end devices suddenly drop connection. Wired connection works just fine. The DROPPED device can not be reconnected. On MAC I get AUTH time out. I see the SSID being broadcasted from my HTC wireless analyster so radio may not be the problem. I changed to set the speed to G only or N only but not avail. ONLY way to recover from this is rebooting the router.
View 2 Replies
View Related
Feb 13, 2013
Query regarding the Cisco WRVS4400N and Valet M10 routers. How to block the web interface (router login page) from wireless accessibility?
-Our Business is a hotel, so untrusted intruders are our guests.
-Our ISP seeks hotspot methods that we cannot implement.
-Our only solution is routers and an AP to extend internet wirelessly.
the login page or configuration page of the router is always accessible via the gateway address.if the gateway is 192.168.1.1, then a guest can just enter this address and try to guess the password. hacking tools add to the problem.the LAN is working but it is not of certification standards.I seek a way to block wireless access to the gateway login page or physical access only.
View 1 Replies
View Related
Jan 21, 2012
I've just purchased WRVS4400N VPN router and installed it. This was a replacement of a old Linksys router. After installing the router, I've started seeing wireless drops, packet drops and latency on pings. I've installed the latest firmware, disabled Firewall services, disabled IPS. No changes at all. As a basic example, I am pinging my NAS device (hard wired to router) from a laptop connected to wireless below. Previously while connected to my old linksys router the time was equal to no more than 2ms.
View 4 Replies
View Related
Mar 10, 2012
When clients connect wirelessly to the WRVS4400N they successfully get a DHCP address from the Windows 2008 server. After they have the address they can no longer access the server. It cannot be pinged, no drives can be mapped and internet access fails because the same server is running DNS. The WRVS4400N is setup for DCHP relay to the server. Wired clients do not have this problem. Wireless clients that connect to a secondary WAP on the same LAN also do not experience this problem. I have updated the router to the latest firmware version, reset it to factory defaults and reconfigured from scratch. Turning the server firewall off has not made any difference either. I have been able to bypass the internet problem by adding a second external DNS server in the DHCP scope options.
View 5 Replies
View Related
Jun 18, 2012
Is it possible to telnet into the 'WRVS4400N Wireless-N Gigabit Security Router with VPN' router? When I try it says the remote system refused the connection.
View 5 Replies
View Related
Dec 25, 2012
Am I limited to how many devices can connect to my wireless router 802.11g
View 2 Replies
View Related
Jan 18, 2012
We have a 7206VXR with an NPE-G1 processor. We're running the standard stuff on it, but here are the highlights.We just enabled netflow on it to send the data to an external source for analysis and the overall CPU level increased, but not significantly. About what should we expect for the overall CPU level? At this point, it's averaging close to 40% during peak hours.
View 4 Replies
View Related
Oct 16, 2012
I want to setup a vpn tunnel from a Cisco VPN Client in the internet over a fritzbox to the Cisco 876 (Version 15.1(4)M3) so that the vpn tunnel terminates at the Cisco 876.For that reason I used the command "crypto map mymap" on the int fastethernet 1. When I try to connect, the VPN Client opens the window for username and password but then ends with the message "not connected". When I do "debug crypto isakmp" the Cisco 876 shows the message: "phase 2 SA policy not acceptable!". [code]
View 3 Replies
View Related
Apr 16, 2012
I took a SANS 401 class a few years back, and I remember them showing us how you could break PING (buffer- overflow? memory stack?)by pinging things you wouldn't normally.This was on WinXP I can't duplicate this on Win7, and have forgotten what exactly it was we typed in....I think it was some ALT-code characters, or a tick, 0x33 or something....I realize PING can take octal, decimal, and hexadecimal values?
View 5 Replies
View Related
May 7, 2013
On our public wi-fi network we have an acceptable use policy page that users must accept in order to access the internet. However I would like to exclude a few devices from having to do this. We have a couple of Kindle devices from a vendor that they configured to automatically connect to the internet for updates twice a day. But they cannot accept the policy so they are blocked.
View 3 Replies
View Related
Jul 5, 2011
Right out of the box, the WRVS4400N [firmware v2.0.1.3] I just purchased says the WAN interface is DOWN; and it simply will not obtain an IP address from the Arris TM602G cable modem it is attached to. Internet still runs great on the old WRT54G. Is this WRVS4400 DOA? Or is there some arcane setting the quickstart guide overlooks? OR?
View 2 Replies
View Related
Dec 7, 2011
I'll just use the 4400n to provide DHCP to my two VLANs and then a new problem cropped up. I am unable to add a default route to the 4400n's DHCP server. It uses the 4400n's vlan IP as the default route. What I'm trying to ultimately achieve is to configure the 4400n as an access point for our "private" network on vlan1 and also "guest" access to the internet on vlan2.
View 12 Replies
View Related
Mar 3, 2013
I'm having problems trying to establish a IP Sec tunnel from the office to home. All of our machines are Macs so I have been using the directions described in "How to create an IP Sec tunnel for MAC Clients, A QVPN alternative" but I still can't get it to work. My setup is as follows:
The office is connected to the outside world through a MODEM (Sagemcom 2864 Connection Hub). This MODEM is also a wireless router. It's DHCP server provides addresses 192.168.2.x.The WRVS4400N's WAN port is connected to one of the LAN ports on the MODEM. It's IP address from the MODEM is 192.168.2.x. The WRVS4400N provides addresses 192.168.21.x to devices connected to it.We have a DynDNS account and are using the DDNS client on the WRVS4400N router to connect to it.At home, we have a DIR-655 router with IP Sec Passthru enabled. The router provides IP addresses 192.168.1.x for all devices connected to it. I am fairly sure there are no issues with the router setup at home since I am able to VPN into the office of my full-time job without any problems. I have tried just about everything I can think of but have not been able to get this to work. setting up the Local and Remote Group Settings on the WRVS4400N and the IP address settings in IP Securitas?
View 2 Replies
View Related
Sep 16, 2011
Ive setup a few WRVS4400N over the past 6 months, and have been receiving the below message from some of them every couple of hours.What does the message indicate?
View 1 Replies
View Related
