Cisco Routers :: Cannot Run Service Ready Platform Wizard On SRP546
Mar 22, 2012I want change my old router to new one. I have problem with runing SERVICES READY PLATFORM WIZARD.
View 1 Replies
ADVERTISEMENT
Cisco WAN :: Service Ready Engine 910 Module
Jan 1, 2013can I install and Cisco WAAS and Cisco Prime Network Analysis Module (NAM) together on a single Cisco Service-Ready Engine (SRE) 910 module? Or it can only run 1 of the software?
View 2 Replies View RelatedCisco Application :: 3945 - WCCP Redirection For WAAS On Same Platform Using Different Service Group?
Nov 9, 2011if a Cisco router or switch can handle wccp redirection enabled for both waas and some other web content filtering appliance using a different service group?
seems like the priority value would come into play determining which service group gets handled first?
we currently do WCCP for WaaS on our 3945s.
I am going to advocate to my customer that we separate this out for CPU load issues, config complexity issues, IOS issues, etc... but the question is going to come up - "can we do WCCP for different applications on our Catalyst 3750 core switch, or our 3945 WAN routers?"
Windows Waiting For The Network To Be Ready
Jun 26, 2011I'm trying to connect to a wireless network provided by a Sprint mobile hotspot. My computer is running XP SP3 and using a wireless USB adapter to do it. (802.1n)I can detect the network but when I try to connect using Windows I get the message "Windows waiting for the network to be ready." And apparently the network is never ready.I can also use the software that come with the adapter. That doesn't work because when I put in the password for WPA 2, the program saves a password that is far longer then the one I entered. Then I get the message "Authentication failed!" Well, duh.Then the computer tries to connect over and over with no results. "Trying to connect ... disconnected ... etc."
View 13 Replies View RelatedHow To Setup Ready-share On WNDR3700
Apr 26, 2011setup ready share on my WNDR3700? when i log into the router it sees and recognizes my hard drive but it wont let me create a network folder all the buttons are grayed out
View 8 Replies View RelatedCisco Firewall :: 5550 - Failed Instead Of Standby / Ready
Mar 4, 2011Here are the configs for failover:
PRIMARY
failover lan unit primary
failover lan interface failover GigabitEthernet0/3
failover interface ip failover 192.168.3.1 255.255.255.0 standby 192.168.3.2
failover link failover GigabitEthernet0/3
failover
SECONDARY
failover lan interface failover GigabitEthernet0/3
failover interface ip failover 192.168.3.1 255.255.255.0 standby 192.168.3.2
failover lan unit secondary
failover
In the above configs is it i m missing something for failover? when i shut the INSIDE interface of Secondary ASA I get the below output, It shows me secondary failed and primary Active, WHY it is showing me FAILED instead of STANDBY/READY. What i know about firewall failover is when active goes down the other becomes standby unit but in this scenario it is showing me FAILED,
FW0001(config)# sh failover
Failover On
Failover unit Secondary
[Code] ....
Cisco Wireless :: WLC 2100 Ipv6 Ready Connection
Apr 30, 2012We have a 2100 cisco Wireless LAN Controller which manages 3 APs and assign IP address to clients which connects via wifi. Currently, we are deploying dual stack IPv6 and our consultant stated that our current controller does not support IPv6.
This is rather odd statement because there is an option to enable IPv6 in the advance tab of WLAN. And sometimes clients (win7 and Mac OS X) are getting v6 addresses, able to ping v6 sites, and reach v6 sites successfully. And other times, clients do not..or getting the v6 address for 10-15minutes, then unable to ping/reach v6 sites.
Our consultant is sticking by his words saying it does not support. If this is true, then clients should not be able to get v6 at all....not sometimes and not other times; very inconsistent.
And what is ipv6 pass through? What is ipv6 bridging?
Cisco Switching/Routing :: Reason For L3 Not Ready In Nexus 5596
Dec 19, 2012we have configured VpC between two Nexus 5596, for Vpc-Keep-alive-link we configured L3 interface with 1G (GLC-T) ,it shows the below status message "L3 not Ready" with interface LED glows in Yellow in color. is this a physical layer problem
Ethernet VLAN Type Mode Status Reason Speed Po Ch
Eth1/17 -- eth routed down L3 not ready 1000(D) --
Eth1/18 1 eth access down SFP not inserted 10G(D) --
Eth1/19 1 eth access down SFP not inserted 10G(D) --
Eth1/20 1 eth access down SFP not inserted 10G(D) --
Eth1/21 1 eth access down SFP not inserted 10G(D) --
[code].....
Cisco Routers :: RV120W To Setup For Vpn Service
Oct 24, 2011I was wondering if I could setup my router CIsco RV120W to be able to connect to a VPN serice for my internet connection. Looking to give my small home netwok more sercurity. Is it possible with the Cisco firmware to be able to setup a connection to VPN serice. Do I have the compabilites with this router?
View 1 Replies View RelatedCisco Routers :: RV220W One-to-One NAT Only Allows A Single Service?
Sep 16, 2012Just purchased an RV220W for a customer to replace a WRVS4400N that had no support for One-to-One NAT and have found the One-to-one NAT for this router is only marginally better.
I have three WAN addresses and three devices to map them to. With the RV0xx I've used the following configuration over a dozen times.
WAN Address 1 - the router's public address Port forward HTTP, HTTPS, and SMTP to Windows Small Business Server 2011 Email and Remote Web Access are accessible at remote.company.com
WAN Address 2 One-to-one NAT to private IP address of Ubuntu Server Add the following access rules: Deny allAllow HTTP from any to private IP address of serverAllow SSH from my company's static IP to private IPAllow FTP from my company's static IP to private IPCompanies website is accessible at company.com and I can update the website with SSH and FTP
WAN Address 3 One-to-one NAT to private IP address of the Hyper-V server's Intel RMM module (Lights out remote management) Add the following access rules: Deny allAllow HTTP, HTTPS, and all RMM ports from my company's static to the RMM modules private IPI can access server at rmm.company.com from my companies network connection
My problems are as follows:
The One-to-one NAT option now requires you to specify the service you'd like to forward (Note: service, not services)If you select the Any service which is the only way I can see to have more than one service, there is no way to add any specific Allow or Deny rules because the Destination box is grayed out on the access rules page.This results in my Ubuntu server only having HTTP forwarded to it and my RMM module having all ports opened up to any IP address. There must be some way around this! I don't understand why the Destination IP option is greyed out for all Inbound access rules. I have been using this same configuration with the Cisco RV0xx, many Sonicwall firewalls, as well as several Cisco ASAs. Obviously this is not an ASA but this implementation of One-to-one NAT is useless!
Cisco :: Possible To Have Service Policy On Layer 2 Uplinks To Routers
Jan 10, 2013I have the following scenario: Pair of Cisco 887VA routers acting as Layer 3 for Voice/Data VLANs with a pair of 2960 LAN Base switches acting as Cores and possibly then 2960 LAN Lites hanging off them as access switches. Our Service Provider has provided an example config where the class-maps match based on dscp values for the QOS policy applied to the DSL circuits. We can obviously trust the attached phones but I want to be able to mark data traffic on my core switches based on destination IP/port to allow application definition. My major question is can I have a service policy on my Layer 2 uplinks to the routers where the linked classes setting dscp vlaues are based on class-maps matching on the contents of IP access lists based while at the same time not remarking the EF marked packets from the phones?
View 7 Replies View RelatedCisco Routers :: RV180W To Use Another Ddns Service Other In The Default
Sep 26, 2012I am trying to set up DDNS for my network. Right now there are only RV180W for DDNS providers (DynDNS, TZO, and 3322).I wanted to use a free DDNS provider, however DynDNS and TZO are now pay only (or only a short free trial via credit card). 3322 seems untrustworthy, as Google is reporting that it is a security risk?Anyway, my question is: "Is there a way I use another DDNS service other than the ones offered by default in my RV180W?"
View 0 Replies View RelatedCisco WAN :: 2901 / 2911 Routers Service Module?
Dec 5, 2011I have some confusion about some hardware components. I watched the video datasheet of cisco routers and switches. In cisco 2901 and 2911 models of routers there is service module . What is meant by service module. what does it do ? If we buy a new 6500 switch, what are the components we get bydefault. Is there any special configuraton to be done for 6500 . like Sup engine config etc. What is the difference between ASIC and Sup engine ? In which slots, we need to insert Supervisor Engine ? does it vary with the model . (6503, 6505, 6509, 6513 etc).
View 6 Replies View RelatedCisco Routers :: RV042 Setup To Use DDNS Service
Sep 1, 2011I am trying to set up my rv042 to use the ddns service. The rv042 is directly connected to the ISP provided modem on WAN port 1. The problem is that instead of seeing the internet IP the rv042 is using the ISP sub net assigned IP.
LAN IP : 192.168.1.1 WAN1 IP : 192.168.12.9 WAN2 IP : 0.0.0.0 Mode : Gateway DNS (WAN1) :DNS (WAN2) : 192.168.12.1 DDNS(WAN1 | WAN2) : Off | Off DMZ Host : Disabled
Cisco Firewall :: ASA 5510 / Ip Service Object And Service Group
May 16, 2011When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq
[code]...
Cisco Routers :: DDNS Service Configuration String RVS4000
Apr 15, 2012How to to successfully configure and connect to a DynDNS account with RVS4000? This was working fine for me until recently when I think I upgraded the firmware to 1.3.3.5.I am trying to connecting to DynDNS.org service. In the past, I used the following string for the Hostname which worked: 'mysubdomain.domain.com&system=custom' (including small quotes). According to the RVS4000 documentation, all you should have to do is specify the host name with DynDNS but this clearly is not accurate.
View 1 Replies View RelatedCisco Routers :: RV220W Missing PPPoE Service Name Option
Jan 13, 2013Recently I bought RV220W router and found out that PPPoE connection option or profile do no have service name field at all. Unfortunately, my ISP requires this to be able to connect. I had done some research before buying this router by going through online device manager demos on cisco website. RV220's interface is not available, but RV215 is and I checked out some of the common features between both routers. Surprisingly RV215's PPPoE connection settings has service name option.
I suppose, unless there is new firmware update (my current router is already running the latest available firmware), this option cannot be added in the interface. What I want to know is, is there any way to configure the router to use the service name in PPPoE option or in PPPoE profiles? I don't think RV220W can be accessed via terminal/SSH or maybe even terminal.
Cisco Application :: ACE 20 Service-policy Out Of Service / Still Able To Connect To VIP
Feb 28, 2012We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.
Belkin Routers :: F5D8235-4 V3 Constantly Looses DHCP Service?
Dec 27, 2012My F5D8235-4 v3 constantly looses it's DHCP service and needs to be rebooted.
View 1 Replies View RelatedBelkin Routers :: N150 - Establish Connection To IPTV Service?
Feb 24, 2013Is it possible to establish a connection to an IPTV service with the N150 wireless router?
View 1 Replies View RelatedCisco Routers :: RV180 / Setup Custom Service That Contains Both Multiple Disjoint Ports?
Jul 11, 2012I have an rv180 and I'm trying to setup a custom service that contains both multiple disjoint ports (some UDP some TCP), as well as a TCP port range. This has lead me to a couple of questions.1) Is it even possible to have a single custom service with disjoint ports? Is it just going to be necessary to define multiple partial services for this?2) Is it possible to forward a range of ports? It's clear how to define a service with a port range, but the port forwarding table interface only allows me to select one LAN-side port for any service. Is there a secret notation that I need to do here that will just forward to the same LAN-side port as the WAN-side port---effectively one-to-one NAT forwarding, but just for the selected service?
View 8 Replies View RelatedCisco :: Topology Service In LMS 4.0 / ANIServer Service May Be Down
Mar 25, 2013I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP
DNS is working using host file in driversetc i restarted the server
restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..
D-Link DIR-601 :: Do Need To Set Up WPS Using Wizard
Jan 28, 2012I noticed my neighbors have a WEP password on their wi-fi networks but I don't with my DIR-601 router. (I thought WEP was rather insecure.) But when I logged into the router and filled in the blank password field it refused to connect and showed no way to change it. I understand there is an always-active firewall built in. Does that protect my data and doesn't need a password? I also entered the router PIN number in a field but nothing further happened when I did. Do I need to set up WPS using the Wizard?
View 3 Replies View RelatedAdd Printer Wizard Not Showing
Jan 5, 2011add printer wizard not showing in the network while sharing other printer in the network
View 1 Replies View RelatedWay To Set Up Network Without / Re-install Wizard
Jan 30, 2012I recently re-installed Vista and while attempting to set up a wired network, I can't locate the wizard.I only need to set up two PCs. Is there a way to set up a network without it or is there a way to re-install the wizard.My service is Xfinity cable internet, a net gear router (5 port 10/100 Mbps FS605 v3).My pc is a HP s3700y 32-bit, the other is a dell running XP pro. I used to have these two networked when I was with Att, but with this new service I wanted to wipe the HP clean. Now I can't find the wizard, all equipment is operating properly.Have ran several checks.
View 14 Replies View RelatedWizard Cannot Connect To Modem
Apr 14, 2011My husband moved my desktop where my netgear router is connected to and now I have a red light indicating no internet is being detected. I tried re-connecting my router by going to the netgear ip address, I got in and it says its disconnected. I went through the set up wizard to see if that would fix the problem. But it didn't connect... I typed in my DSL ID and Password but it still didn't find a connection. Then I tried again and this time I tried connecting (NOT MANUALLY) it found a connection using the generic ID and password that att gave me. I was directed to the AT&T set up website and at the end of the set up it didn't find my modem..
View 14 Replies View RelatedCisco VPN :: RV220W What To Enter For Remote WAN In VPN Wizard
Apr 8, 2011I have just received my RV220W Small Business Router and I do not understand the manual/UI wrt VPN. In the past, I had a PPTP server running behind a NAT and I used Pass Through to get external clients (Macs) to connect to my local LAN. But now I would like to use the Cisco Router's VPN capabilities to set up VPN and shut down the PPTP server in my LAN.I have a couple of fixed IP addresses that end up on this router, wit ISP-based 'technical' domain names (e.g. foo.static.isp.com) with reverse lookup, so using those, I should be able to connect to my RV220W from the outside.
View 0 Replies View RelatedCisco Firewall :: ASA 5505 / ASDM Has No VPN Wizard
Oct 1, 2012I am trying to configure a site to site ipsec vpn with 2 cisco 5505 ASA's. Unfortunately when i open up the ASDM there is no vpn wizard to start the configuration.The version of ASDM i am using from flash is 645-206.bin and the firmware on the ASA's is 842-k8.bin so should be ok. Why the VPN wizard doesnt appear?
View 7 Replies View RelatedCisco Firewall :: 5505 No VPN Wizard Functionality
Sep 30, 2012I am currently looking at the suitability of replacing an 'airbreak' firewall with 2 new ASA 5505'S.One stipulation i have is that i require to connect the third party that is currently using the 'airbreak' solution using a secure iPsec VPN.I have both 5505's that were supplied by the third party, but i believe i may need a new fireware upgradeI am using ASDM 6.4.XX and the ASA's have firmware 8.4(2) and a basic licence.Am i correct in assuming that the VPN wizard functionality is missing because of th firmware installed currently on both of the ASA's? or am i looking in the wrong place?
I have done a fair amount of research an can see earlier versions of ASDM wit the VPN wizzard so can only assume it is down to the firmware.i see that the latest version for the ASA 5505's is 8.4.4 and was wondering if this will provide me with the functionality i require as it does mention in the documentation that it does support the clientless VPN options. What part number ASA5505-BUN-K9 relates too in relation to firmware for the ASA's? [code]
Cisco WAN :: 887VA-W Startup Wizard Missing?
Nov 17, 2012Ive just started up a new cisco 887va-w and the startup wizard doesnt start. Is there a way to make this manually start?
What i tend to do is run the wizard for the basic settings then run 10-15 lines from the client (depending on adsl or vdsl config) to configure the router. But for some reason this one doesnt fire it after loging on with cisco cisco to 10.10.10.1 and changed the username and password. I just get the bebased cisco cp 'basic'. Cant see anyware on it to launch the wizard either.
Ive tried reset button on the back and reset to factory from cisco cp?
Software running on the unit is c800-universalk9-mz.spa.151-4,m4.bin
D-Link DIR-615 :: CD Broken - How To Get To Installation Wizard
Feb 23, 2011i have already installed this, but it stop working so i unplugged it, now cant find the CD
View 1 Replies View RelatedCisco VPN :: Remote Access Vpn Wizard Does Not Work Asa5505
Apr 3, 2013I have a brand new ASA 5505 running version 8.2(5). Got connected with the ASDM and ran the setup wizard and the remote access VPN wizard. I am not able to ping the outside interface from the internet, and my VPN client gets no response when trying to connect.
View 5 Replies View RelatedCisco :: 851W Initial Setup / SDM Wizard Fails
Jun 21, 2011I bought a Cisco 851W router from a coworker about a year ago and tried setting it up at my home with nothing but headaches. I finally gave up and went with DD-WRT and have yet to look back (my $40 router outperforms this thing on so many levels, but I'm getting off-topic!). I recently re-discovered this beast and pulled it out of storage to see if I could get a test network setup at home to practice on. I checked for any IOS updates and downloaded (and installed) the lastest image (c850-advsecurityk9-mz.124-15.T15.bin). I consoled in and verified the initial 10.10.10.1 IP was configured in the VLAN1 interface and directly connected a PC to one of the switchports and pulled a 10.10.10.2 address. I pull up SDM from my browser (I have used FF, IE, and Chrome, all with the same results. Java version is the latest, 6 Update 26.) and it launches the initial configuration wizard. I go through the steps and get up to the DHCP Configuration (after LAN, before Internet/WAN setup) and try to click Next and nothing happens. It doesn't freeze as I can easily go Back, but can never move forward beyond the DHCP configuration. Pressing Cancel on the wizard just shuts down SDM as a whole and exits.
In my troubleshooting steps, I did notice that as soon as I click Next in the DHCP configuration, nothing will happen in the wizard, but the SDM window in the background will automatically present the "Apply Changes" and "Discard Changes" buttons, which weren't there in the previous steps. Of course, neither of those are clickable due to the wizard being open. I really don't want to configure this thing from scratch using the CLI if I don't have to..is there ANY way I can bypass the SDM Wizard at all? Also, I'm running SDM Express, would downloading ASDM and trying to connect from there make any difference?
