Cisco Routers :: RV 120W Network Scanner No Longer Works
May 27, 2012
I have recently changed a couple of our companys office routers over from a netgear vpn router to this, all has gone well with the cisco router providing much better speed and reliablilty... But....
I have one little problem, at one of our offices they have a brother printer that has a scanner built in, since this change over the scanner does not seem to want to work,
as far as i can guess the router is blocking communication to the scanner, printing is working fine. is there anything that I need to enable or add to the settings on the cisco to get this working? I believe that the printer is using some kind of multicast to connect to the PC's
View 1 Replies
ADVERTISEMENT
Aug 16, 2011
the name of my wifi network changed and I do not know why, therefore the password for the former name will not work with the new network name
View 1 Replies
View Related
May 7, 2011
Acer Aspire 4520 Wireless network no longer works.
The light on keyboard is lit up but when pressed, it says No Device.
Went out a long time ago and I quit using the laptop. Borrowed external adapter which works.
No updates found for driver.
View 8 Replies
View Related
Sep 15, 2011
I recently installed a new RV120W router at one of my customer's office. I have 2 users connecting using the Quick VPN software.The first one is running on a Windows XP Pro SP3. Everything works great on this PC.The second PC is running on a Windows Vista - The QUICKVPN client stays at Veryfing Network and Eventually I get an error " The remote gateway is not responding. Do you want to wait?I have disabled Firewall on both PCS for troubleshooting purposes.
View 1 Replies
View Related
Jul 16, 2012
Basically, I rebuilt my network over the weekend, to include a subnet, and can no longer connect my desktop to the remote PC. My old router was reset to defaults and re-configured. My PC has been wiped, reinstalled, and fully updated.The error I receive is "Remote Desktop can't connect to the remote computer for one of these reasons: etc" I've only seen this error in the past when the PC I connect to was powered down. I have confirmed that everything is still set up properly on the PC I'm trying to connect to via an associate, and it is not powered down.
Old setup:
[My Win7 PC] ---- [old router] ---- [modem] --- [internet] ---- [Remote PC (Win 7)]
...............................| | |
.........................other local PCs
New setup:
[My Win7 PC] ---- [old router] ---- [new router] ---- [modem] --- [internet] ---- [Remote PC (Win 7)]
.........................................................| | |
...................................................other local PCs
1. I went into Windows firewall to allow Remote Desktop through, but it looks like that only needs to be set for the PC I'm trying to connect to. (Yes/No?)
2. I've forwarded port 3389 from the old router to my PC.
3. I haven't done anything yet to the new router, because I really can't tell if I'm doing the right things. The very first time I connected to the remote PC, it went right through, and I didn't have to change anything in the old router (I think - it's been awhile). I really don't know where to go from here, and it looks like the setup options I've found in the forum so far (static IP, port forwarding, Windows firewall changes, etc.) leave me with more security risks than I had on the old network, and there seem to be some conflicting opinions about the setup process.
View 2 Replies
View Related
Aug 9, 2012
I've been having an issue with my internet connection. I have AT&T Uverse high speed internet, complete with the Motorola NVG510 ADSL modem. For the past couple weeks, my download speeds have gone from 1.0 MB/s to < 100 KB/s up to 400 KB/s if I'm lucky.I used to be able to download files and watch videos at the same time with very little trouble, but now I only have enough bandwidth to either do one or the other without causing any problems. I thought my ISP had throttled my bandwidth, but I've run the Glasnost tests at url... and it came back as fine.It may not mean anything, but I should note that a few weeks ago, we had storms move through the area and lightning struck our house. It ended up shocking my mom through the USB mouse while she was using my computer, it blew out one of my computer speakers, and I believe it's the reason why the ethernet port on my motherboard no longer works.
View 13 Replies
View Related
Jan 5, 2012
Well I was trying to get my D-Link DIR-615 router too run DDWRT so I could use it as a wireless reciever.But things have gone wrong, the wireless controller no longer works. and I'm trying to restore the original factory firmware.(this is a spare router we had sitting around it's not an important asset) it boots up fine with DDWRT firmware the wire functions still work, but I needed the wireless functions.I just can't get the original firmware back.
View 1 Replies
View Related
Jan 6, 2013
I have an E1200 model 1 router. I've owned it for over a year and it's given me no problems until now...Hardwired ethernet connections work fine, but the wifi no longer works consistently. I have several wireless-N wifi devices that either cannot connect to the router at all (they present an error message), or do connect but will not load anything over the connection, or will load web pages very very slowly and then suddenly drop the connection.When I go to the DCHP client table, I see all of my ethernet connections but it does not show any wifi devices, even if the WiFi device is showing a connection to the router.The wifi connection is secured via WPA2 Personal.I have tried changing channels to one that was not congested with any other nearby routers. I have also tried a 30-30-30 factory reset. I am updated to the latest firmware version (1.0.03). I am sure I am entering the correct pass phrase to connect over WPA2. All of my wifi devices are confirmed to be wireless-n, not g or b.
View 7 Replies
View Related
Oct 17, 2012
Network hub, model f5l009 not registering as a connected network USB Hub. Therefore, unable to update firmware. Devices connected to HUB are of course also not showing up. Reinstalled drivers. PC Windows 7 home pro on Comcast and a Cisco router. Firewalls are set to "allow". Only change in system is from internet providers to "Comcast". What might be causing the problem? Tried connecting directly to the Comcast router and that didn't work. Tried a hard reset on the HUB and that didn't work. If this device has failed is there a way to replace it?
View 1 Replies
View Related
Sep 27, 2011
I have the RV 120W router, and can not seem to get SNMP Set to work. I though I would just check here, and make sure it is supported, and if it is, are there any special config settings I need to use?
View 2 Replies
View Related
May 5, 2013
I am interested in the QuickVPN solution for a Mac.I am getting mixed messages in my searches.If not, what is the secure, reliable way to use an RV-120W with a Mac?
View 1 Replies
View Related
Feb 13, 2013
I have a N600dp. My printer, Brother MFC-J410W, is plugged into the router USB port. The printer function works but the scanner function doesn't. I keep getting an error message that the printer is not connected.
View 1 Replies
View Related
Jan 29, 2011
For the life of me I can’t get my quick VPN client to connect to my Cisco 120w. I have IPSec gateway to gateway setup and working just fine. I made my quick vpn client under vpn tab. I enabled remote management. Every time I try to connect I get the failed to establish connection. Using the same quick VPN software I can connect to a rv082 with no trouble.
View 2 Replies
View Related
Sep 30, 2011
I recently replaced a client's router with a Cisco RV 120W. The client employs a web-based application on an internal server that manages their business. Workers in the field use a handheld device power by WIndows Mobile to access a mobile version of the the web-based app. Data contained on the mobile app syncronizes with the server when workers choose a sync menu. Some workers perform this sync in the field, others wait till they return to the office and use the wireless provided by the router. Prior to changing the router, the synching worked fine either inside or outside the company network. The mobile app accesses the internal server via the router's public IP address. The router forwards the http requests to the internal server. But now the synching does not work internally. I assume it's because the Cisco RV 120 W does not support NAT Loopback, or I simply haven't figured out how to enable it. Does anyone know how to enable NAT Loopback on the RV 120 W so I can access the web-based app by through the router's external IP while on the private side of the LAN??
View 2 Replies
View Related
Apr 27, 2012
I just can not find the way to check the mac address and computer name of the client which connected to my rv 120w?
View 1 Replies
View Related
Sep 9, 2012
How can i check the website history in router?I want to know the website which the user explored through the router.
View 1 Replies
View Related
Dec 21, 2011
I just installed a new RV 120W to replace my dlink router.The problem is i cant display the configuration site (192.168.1.1). My internet is working fine and when i go to 192.168.1.1 i can logon (with the password i set using the installation disk) but then i see the top of the config site (blue) but where the config panel should be i see `site cannot be displayed`.
View 4 Replies
View Related
Jan 17, 2013
i am using the router,rv 120w can i redirect website to a special IP? for example,the website www.cisco.com, can i redirect it to the IP :8.8.8.8 in router?
View 1 Replies
View Related
Oct 12, 2011
I managed to set up an ipsec vpn between the RV 120W (responder) and Shrewsoft vpn client.The virtual ip and dns for the client pc are manually set. The tunnel is enabled, but I see no traffic between the local and the remote LAN.I can't ping or reach any pc behind the router.Using the command ipconfig /all on the client pc, I see that no gateway is assigned to the virtual vpn interface.So it seems that the RV 102W is unable to pass to the client the address of the default gateway for the lan, and I think this is why I can't access any resource.
View 4 Replies
View Related
Sep 12, 2011
I am not a tech guy but have to take care of some basic IT stuff. I had Ether fast cable/DSL router and it got changed with RV 120W router. there were comment that internet is now working slowly - what could be the reason for this?
I copied most of settings. First big technical problem was with phone. It stopped working - call could get through but when answered there was no sound. We use linksys modem for VoIP. I called operator and was told to disable sip alg. I did that and service improved a little. When answering a call sound could get through but would stop for few moments and then continue. Operator told me to forward port 16384 to 16482 to VoIP modem IP. But I can only set forwarding for one port at the time in "Port forwarding" settings. Is there a way to forward to port range?
View 4 Replies
View Related
Dec 5, 2011
I have a RV 120W router and SBS 2011 Essentials server. The remote access was working porperly, but now when I type the URL it brings up the RV login screen instead of the Remote Access sign in page. I am not certain what settings are messed up.
View 3 Replies
View Related
Mar 3, 2013
I have a RV120W; configured to perform port forwarding. I have Configured a Port Forwarding and Access Rule
* Sample Firewall: Access Rules:
Action | Service | Status | Connection Type | Source IP | Destination IP
[Code]....
Everything works, but in my destination server, i see as remote address the IP for the RV120W. I want it to forward also the originating IP address of the client (the remote address)
Is it possible to configure this?
I have also configured DMZ for my server, but see same behaviour
Firmware: 1.0.3.10
View 3 Replies
View Related
Sep 9, 2012
I have block some website in URL Blocking.But they can access the website which i have blocked through proxy server? Can i deny user access proxy server? It has many proxy server,i can not block the proxy server one by one.
View 1 Replies
View Related
Sep 11, 2011
We have just acquired a Cisco RV120W Firewall Router and we are experiencing issues with this router. I've read some threads related to port forward issue with RV120W before writing this new topic.
We have 2 locations (site A and site B) connected with a Site to Site VPN (PPTP) running under Windows Server 2008 R2 with TMG 2010. This Site to Site VPN worked very well until we replaced our old router with the RV120W at site B. Since this moment, our engineers are not able to make the site to site VPN work again. The TMG box are located just behind the router.
We have followed some threads about Port Forwarding but it did not solve our issue (others port forwarding rules for RDP for example work). Our RV120W is running the last stable firmware (1.0.2.6) provided by Cisco.
View 1 Replies
View Related
Oct 13, 2010
I recently cut over from a WRT54G to a RV120W. I am having an issue where I type [URL] (for a server running on my network) in my web browser while on the internal network and it always comes back with the router login page. Basically it is supposed to go out of the router and then come back in on the public IP address and hit that server. There was a function on the WRT54G called "Filter Internet NAT redirection" which when turned off would allow this to happen. I am not seeing a feature like this on the RV120W
[URL]
View 29 Replies
View Related
Sep 22, 2011
using virus scanner over the network and this is related to my workplace. a pc with win xp can share all drives (including c:) over the network with another pc with win xp as well. let's say pc1 and pc2 (both with win xp). i can scan pc2 from pc1 once i hv shared all the drives. but for win vista n 7, i found out that it is not possible to share c:...yes, there are some ways to share it but the entire c: cannot be shared. n i also know that c: cannot be shared entirely due to security purposes. but can i bypass this only for virus scanning purpose? i know many will juz ask me to install the anti virus on the infected pc, but if possible i want to scan it over the network. if i hv to scan 20 PCs at the same time i find it easier to do it from a single pc than to install the anti-virus at every single pc.
View 6 Replies
View Related
Oct 7, 2011
I have a Canon ScanFront 220 network scanner that seems to have a problem with our network. It's plugged into a Cisco 3560. The network is operational, just chatty.
A wireshark session for just a few seconds looks like this: (192.168.81.42 is the scanner)
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.89 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.90 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.91 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.92 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.93 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.94 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.95 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.96 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.97 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.98 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.99 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.101 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.102 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.103 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.104 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.106 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.108 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.109 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.110 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.111 Vlan81
I can't find anything on the scanner that would cause this.
View 3 Replies
View Related
Feb 8, 2011
I added the network printer cum scanner - cm1312, going to control panel >> add printer >> etc. etc. Now I can print. But there is no scanner installed. What I can do?
View 5 Replies
View Related
Nov 12, 2011
Im working for a client at the moment and I've had to setup a network printer for them, I've got 4 Windows 7 machines easily printing over the network to this printer that is connected wirelessly but they want one of there machines to use the scanning functionality of the printer.The scanner doesn't show up at all in the local network devices like the printer does and to be honest i don't really have any experience with scanning over a network to a windows 7 machine, but this printer does support scan to ftp so my idea is to setup a small ftp server on the windows 7 machine with a folder to stored scans on the desktop or something, then put the details of the server in to the printer making it as easy as possible for the customer to scan stuff and just get it from the folder on the desktop, i could also share this folder over the network for anyone to open and get a scan if needs be.
View 2 Replies
View Related
Mar 13, 2012
I want to connect two sites through a VPN tunnel, such that each machine can access all others, regardless of which site they're located.
The two sites have a VDSL connexion with dynamic public IP addresses. Unfortunately, our ISP does not offer static IP addresses with VDSL connexions.
I plan to do the following : install two RV 120W routers, one at each site, right after the VDSL modemconfigure the modems in bridge mode, such that the 120Ws get directly the WAN IP address and trafficuse DynDNS to assign domain names (site1.dyndns.org and site2.dyndns.org) to each siteassign different subnets to each site (ie 192.168.1/24 for site 1 and 192.168.2/24 for site 2)configure a VPN tunnel in gateway mode using the FQDN (site.dyndsn.org and site2.dyndns.org) of each site on both routers, with corresponding remote subnets
View 2 Replies
View Related
Mar 15, 2012
I have 2 RV042 routers. As of yesterday, for over 2 months, quick vpn has not been functioning. I had a 2008 server installed; the tech could not get the quickvpn clients to the server, so his solution to give clients access was to map the server to the internet. As you can imagine, it has been attacked consistently and we have since removed the server. Clients have not been able to use Linksys quickvpn client to connect. I have had 3 different network technicians, and have been charged way too much for nothing, and the best i got was it being restored to its broken state. We thought it was a flakey router, but both do the same thing.
View 7 Replies
View Related
Sep 11, 2011
I have a RV082 in the corporate office, and several remote people connecting to it using QuickVPN through a variety of clients (XP and Windows 7). As of today, they are all now seeing the "Remote Gateway is not responding - disconnect or wait" message. Checking through the logs on some of the remote clients, I see the "Failed to ping the remote router" message several times, followed by the "Ping was blocked, which can be caused by an unexpected disconnect." message.
The odd thing is that everyone has been running very well over the past 2-3 weeks - most people with 8+ hours of solid connectivity. We made no changes to the clients, nor to the remote router in the corporate office.
View 3 Replies
View Related
May 18, 2011
I recently changed from an SMC Barricade N to a Belkin Share N300 wireless router and my xbox 360 can no longer recognize my pc over the network. The xbox is connected to the router physically and the pc is connected wirelessly. Both the pc and the xbox can access the internet. This problem did not exist when I was using the old router. Media sharing on my pc is configured exactly as it was before I changed routers.
View 3 Replies
View Related
