Cisco Routers :: RV042 Can't Open Any Port

Jan 17, 2012

I have a RV042 Dual Wan. Two internets balanced wow! who would've thought that the headaches were waiting patiently right down the corner.
 
I was working with a 2wire Gateway that came with my ISP. I was able to open the ports in order to have public access for my students and teachers to upload their work. All I had to do was to allow my server ip address to have access to different ports blocked by the ISP. I used [URL]
 
I bought the RV042 for various reasons like excellent content blocking, load balancing, quick vpn, among other. But I just can't open the port 80 while having having my two ISP connected with load balancing, not even while having only one modem connected.
 
I have resolved many issues using the protocol binding. I have tried everthing. I just don't undertand something.
 
Whenever I connect my server to my old router, "www.canyouseeme.org" tells me that my port 80 is open. Whenever I connect my servet to the RV042-DW, my port appears closed.
 
So it's not any OS issues. 
 
I've tried:
 
- To forward the TCP 80~80 port to my server static ip address... but failed

- To enable UPnP function with the same port... but failed

- To configure the port triggering with the same port.. but failed.

- To disable the firewall.. but failed.

- To use transparent bridge in the WAN1 with my 2wire Gateway... but failed

- To set up an account in DNS.ORG already had one, everythings is in green.. but failed.

- To change the configuration in my old 2Wire Gateway router to allow a DMZ zone so all ports are public... but failed.

- To assign RV042 router ip address in my old 2Wire allowing that specific address to allow certain ports to be public... but failed.
 
I have the  Firmware v4.0.4.02 from DEC/11
 
[URL]

View 2 Replies


ADVERTISEMENT

Cisco Routers :: RV042 V3 And Two Xbox360s - Open Nat And Can't Get There

Dec 12, 2011

I have been trying for about a week to get open nat on my three xbox 360's I have in my home. Things came to a head last week when the gaming group and I tried to play over xbox live, but our games kept disconnecting. When I checked my network, none of my xboxes had open nat.
 
I had only one public ip at the time we had the trouble, but now I have 5 public ip's from comcast. Currently, I only have one of them setup with my router working as normal.
 
On that router, I have given the two xboxes static ips:
 
10.141.167.50
10.141.167.51
 
One of the xboxes is setup with port forwarding with the following ports:
 
3074 UDP/TCP
88 TCP
80 TCP
53 UDP/TCP
 
the other xbox is setup as a dmz host. The xbox that is setup with port forwarding gets open nat, but the other one, despite being the dmz host, does not get open nat.
 
The router is setup as follows:
 
10.141.167.1 - router ip
10.141.167.2-149 - dhcp server range
255.255.255.0 - subnet mask

My dns servers are from open dns. I have only one wan connection coming into the router also. That is through comcast business class. The connection is a 30/5mbps connection. One last thing, I have the latest firmware on the router as well. I updated it last thursday evening 12/8/2011.

View 2 Replies View Related

Cisco Routers :: RV042 V3 And XBox 360 / Can't Get Open NAT To Work

Dec 14, 2011

How to set this new router up correctly in a way that they can get open nat with one Xbox on the network?I have tried to setup the router so that I port forward the following ports:
 
UDP/TCP | 3074
TCP | 80
TCP | 88
UDP/TCP | 53
 
The xbox is setup with a static ip address:
 
IP | 10.141.167.50
Subnet Mask | 255.255.255.128
Gateway | 10.141.167.1
 
In addition to simple port forwarding, I setup access rules in the firewall with any source to go to the 10.141.167.50 single ip destination. I have also tried with port forwarding off, but upnp on, and the ports setup specifically in that screen for this xbox. Finally, I disabled the port forwardingin the upnp, as well as the port forwarding screen and simply setup port triggering, while leaving the upnp service enabled. After all of that, the xbox would not get open nat. It doesn't make any sense to me that this doesn't work. I even tried turning off all port forwding and triggering and putting the xbox in as the dmz host. No dice. I'm honestly thinking now that there is a problem in the firmware or something that requires some special workarounds. I'm on the new firmware (i.e. 4.1.0.2) and at the end of my rope.

View 2 Replies View Related

Cisco Routers :: RV042 Leaves Ports 80 And 443 Open To Shields UP?

Jan 2, 2012

Is there a way to use QuickVPN with the RV042 without leaving ports 80 and 443 wide open to Shields UP! scans?  As a workaround, I am forwarding these ports to a non-existent IP and forcing QuickVPN to use port 60443.  Yes, 60443 shows as open too if I scan it, but at least it's not in the first 1056 ports.
 
Router is Linksys-branded, using latest firmware for this hardware (1.3.13.02-tm)

View 5 Replies View Related

Cisco Routers :: RV042 - How To Close All Ports And Leave Some Specific Open

Apr 18, 2012

A company with 20 branches in Rio de Janeiro area. The main servers are in a datacenter located in downtown.Each branch has a RV042 router with firmware version 1.3.12.19-tm (Feb 13 2009 13:03:21) installed.All users in this network have a proxy configuration pointing to proxy.[blah].com.br port 3128.the HTTP/HTTPS traffic should go through proxy only. [code] Some "smart" users were caught using Ultrasurf application, which changes the proxy settings to go through port 9666 or even 443.In other machines, we've found some black proxies [for example: 212.46.27.142 port 8080].
 
My objective:

- To close all ports in Firewall -> Access Rules section and grant permission only to some selected and specified ports.

- To redirect all HTTP/HTTPS connections to go to proxy's IP address only.
 
Which Access Rules can I set in these RV042s in order to block and prevent these users to continue abusing this network?The users who were caught using Ultrasurf were fired.

View 3 Replies View Related

Cisco Routers :: Auto / Programmatic UPnP Port Forwarding For RV042 And E4200 Routers

Jan 24, 2013

I have RV042 and E4200 routers . I tried the manual UPnP port forwarding using Rv042  router and was succesful ( by typing 192.168.1.1  in the explorer and  logged in using user name and password )
 
I am using a linux embedded system  whose  Internal IP ,Internal port  are mapped  .This system is connected to one of the LAN ports    
 
I want to try auto UPnP port forwarding both for  RV042 router and Linksys E4200 routers 
 
After  enabling the Upnp option only  and logging out ,Can i add a port mapping entry in this router without logging in  using  a  C++ program  which runs on  linux embedded system .

View 2 Replies View Related

Cisco Routers :: RV110W Port 443 Always Open

Mar 31, 2012

I just bought and setup a RV110W. I noticed while scanning it from the WAN side that it always has port 443 open, even when remote management and VPN access are disabled. Why is this port still open, and how do I close it? Or is this a bug in the firmware? I am using firmware version 1.1.0.9, which is the most up-to-date for this unit. Having open ports allowing unsolicited contact from the WAN side, especially inadvertant ones, is a major security hole.

View 7 Replies View Related

Cisco Routers :: Lock LAN IP To One WAN Port On RV042?

Jun 24, 2012

I'd like to use load balancing with the RV042, but I have some devices that don't react well to not always using the same outgoing port (like a credit card machine, for instance). Is it possible for me to create some "rule" with the RV042 that an internal IP address will use a certain WAN port? And if so, when that WAN port goes down will the RV042 fail-over to the other active WAN port? I was able to do this with a Xincom XC-OPG502 (which is being replaced with the RV042).

View 1 Replies View Related

Cisco Routers :: RV042 - Port Forwarding Using Both WAN 1 And 2

Apr 19, 2013

Currently I have the RV042 router working in a dual WAN set up, it is configured to accept connections on numbers of ports like 80,443, 25 and forward them to a local ip.

The problem is this only works with WAN1. Is it even possible to forward ports for connections coming in over WAN2?

View 5 Replies View Related

Routers / Switches :: Why Is Port Forwarding Not Open

Dec 25, 2011

When checking my port forwarding, it says that it is not open.

View 2 Replies View Related

Cisco Routers :: RV042 - How To Publish A Port To Specific IP

Feb 18, 2013

I want to know if is possible to publish a port of an internal server to be accesible from internet but only from a specific IP.I know that in Setup menu exists Forwarding but it allows to publish ports to all internet no matter the source IP.

View 1 Replies View Related

Cisco Routers :: RV042 Port Forwarding Bypassing ACL?

Jan 2, 2013

I have a RV042 with Port Forwarding configured for RDP. This Port Forwarding Rule is being applied before my ACL - so subnets that are not authorized through are being allowed in. Firmware version 4.0.0.07.              

View 2 Replies View Related

Cisco Routers :: RV042 - Using Specific WAN Port For Particular Domain / IP

May 21, 2013

I have RV042 router which is connected to the internet by both the wan ports and I want to use it as a load balancer so that both of my internet connections can be utilized evenly. But now I have an issue in this scenario as my remote application gets logout whenever the communicating IP address changes. Is there any way out so that I can specify the wan port used for a particular public IP address/domain name?

View 1 Replies View Related

Cisco Routers :: RV042 SMTP Port Change?

Mar 27, 2013

I have an RV042 that I have configured to send alert logs to a comcast email address. Recently comcast changed their SMTP port from 25 to 465. I can't find where to change the port settings in the RV042 to send the router logs via port 465.

View 1 Replies View Related

Cisco Routers :: RV042 V3 Remote Management Port?

Apr 11, 2013

I have a brand new RV042 v3 that I just updated to the latest firmware (v4.2.1.02) and have stumbled across an anomaly... I can only access the router from the WAN port using port 80.  I happen to have it set to port 8080, but that doesn't work; I have to use standard port 80.
 
I have two other RV042 units running older firmware and they work as expected and follow the port that is filled in.  This one has me puzzled and wondering if this is a bug in the firmware.

View 2 Replies View Related

Routers / Switches :: Unable To Find Open Port

Feb 7, 2011

I have just upgraded my AIM and Skype messengers and now it won't let me sign in. I did before with my old versions. It is saying that my internet connection is bad which it is not. I have looked up ports in my Yahoo messengers, Control Panel and Bit Torrent still nothing.

View 6 Replies View Related

Routers / Switches :: Open A Port On A Motorola Modem?

Aug 26, 2011

how do i open a port on Motorola modem

View 1 Replies View Related

Routers / Switches :: When Checking Port Forwarding - It Says Not Open

May 23, 2012

When checking my port forwarding, it says that it is not open. Why?

View 6 Replies View Related

Cisco Routers :: RV042 Doesn't Receive IP Address From ISP On WAN Port

Jan 23, 2012

I have a problem with my WAN ports. I can´t obtain a ip adress from my ISP. I´ve tried factory reset. Upgrade to lateset firmware. Clone MAC adress from my PC. Nothing is working.
 
But when I plug the WAN port into my Old router it receives an adress directly. When I plug the ISP connection directly into my pc or the old router it´s working as well.
 
I am using the latest firmware: RV0XX-v4.1.0.02-tm.bin
 
And My ISP has an interface with an ADSL modem SmartAX with DHCP.

View 2 Replies View Related

Cisco Routers :: RV042 WAN Port Gives Poor Performance Most Of Time

Jan 1, 2013

I have 2 RV042 routers with identical firmware (1.3.13.02-tm) and settings. One router is a backup that sits in a box, but both experience this problem. The WAN port gives very poor performance most of the time. Download speeds range from normal, 25mb, to less than .5mb. Pings from my command prompt or the routers "Diagnostic" page, even to the cable modem, are almost always above 500ms. However, pings to internal resources are fast, usually under 5ms. If I connect my laptop directly to the cable modem I have no speed issues. The problem occurs whether I use WAN1 or WAN2.
 
If I restart the router, speeds are fine for a few seconds and then it begins to slow down like someone is turning down a dial. We also regularly experience a complete internet disconnect quite often, and when it happens, the ping results are the same when it comes back up, almost like the router is restarting itself. [code]

View 1 Replies View Related

Cisco Routers :: RV042 - How To Direct Traffic Through Specific Wan Port

Aug 1, 2012

I have an RV042. I understand and have created the services I need. The documentation is just not clear on how to direct traffic for these services to a specific wan port.
 
Can this even be done with this router? If so, the how? Use rate control or priority? Does checking a wan port mean that it will only go through that port?

View 4 Replies View Related

Cisco Routers :: RV042 V3 - Port Forwarding And Firewall Rules On WAN 2

Oct 13, 2011

I have a new (about 4 months old) RV042 V3 4.0.0.07 firmware that I am trying to use in fail over mode.  I have a SOHO and I normally use cable Internet connection.  It is quite fast (15 megabit), but not super reliable.  I have added DSL (3.3 megabit) which is five nines (supposedly) but not so quick. 
 
I have a Westell 7500 wireless DSL modem located in the basement, where the telephone lines enter the building.  This gives me a wireless link to the second floor server room through  a wireless router that connects to WAN 2 of the RV042.   The cable modem is in the server room and connects directly to the WAN 1 of the RV042.  The cable works, but when it goes down, the DSL link comes up but does not allow Internet traffic.  The RV042 is set up as a Bridge and I have set up port forwarding to get the cable to work and used similar firewall commands to route the traffic if the router switched over.  I suspect that the problem is in the port forwarding (port 80) or the firewall rules(which are pretty simple) because everything looks like it switches over, but it just doesn't work on WAN2. 

View 2 Replies View Related

Cisco Routers :: RV042 - Direct Browsing Traffic To Only One WAN Port?

Jan 2, 2013

I have a RV042 (firmware 1.3.13.02-tm). Is it possible to configure so traffic from a specific domain (incl. its sub-domains) is directed exclusively to one WAN port?

View 10 Replies View Related

Cisco Routers :: RV042 V3 And SBS 2003 RWW - Why To Configure For Port Forwarding

Sep 14, 2011

I have tried replacing a loaner RV082 V2 with an RV042 V3 router with firmware 4.0.4.02. All worked well, including the site to site VPN. However, in spite of the fact that I have ports 443 and 4125 forwarded to the server (192.168.2.10), we are unable to connect via RWW. There is no such problem with the RV082. What is different with the way we configure these V3 routers for port forwarding?

View 2 Replies View Related

Cisco Routers :: RV042 Port To Forward 11101 Through 11164

Mar 11, 2013

I feel I'm having an issue, and I'm unsure why.We own a Cisco RV042 V03 with firmware 4.0.4.02-tm.
 
I have successfully demonstrated that I can open and forward ports 8001 & 8081 from the WAN side to a specific IP Address on the LAN side.I performed this by going to Setup --> Forwarding, then setup Port Range Forwarding & Port Triggering.

I also changed Setup --> UPnP, then UPnP Function is set to Yes.
 
My issue is that we would also like to forward 11101 through 11164 in the same maner.  However, when I step through the same method described above, it does not seem to work.So now I am confused how I could open the 8001 & 8081 ports, but not the higher 11101 thru 11164 ports.

View 3 Replies View Related

Cisco Routers :: RV042 - Connect Remotely To IP Camera / Port Forwarding?

Oct 26, 2011

I've configured my rounter but am having a firewall issue, I think.I'm trying to connect remotely to an IP Camera.I've set the port forwarding on my router for port 8081 to forward to the IP of my camera.I've set the firewall aswell to allow traffic from the WAN to the IP of my camera.

View 1 Replies View Related

Cisco Routers :: RV016 / RV042 / RV082 Internal Port Forwarding?

May 16, 2012

I'd like to setup a WCCP in those routers, but as I read, it's not possible.
 
Another way to circumvent this limitation is to foward a request to the router from the LAN port 80 to a LAN IP, something like:
 
LAN 1 192.168.1.100:80 -> router -> LAN 2 192.168.1.101:80

View 1 Replies View Related

Cisco Routers :: RV042 Port Forwarding Stops Working When Firewall Is Enabled

Jun 4, 2013

I have a RV042 router on a single WAN and an internal LAN. I have configured port forwarding as follows: HTTP[TCP/80~80]->10.0.0.6HTTPS[TCP/443~443]->10.0.0.6IMAP[TCP/143~143]->10.0.0.5IMAP SSL[TCP/993~993]->10.0.0.5SMTP SSL[TCP/587~587]->10.0.0.5
 
Everything works just fine when I have the firewall DISABLED. However, when I enable it the behaviour is erratic. 1 out of 10 attempts to connect to ANY port forwarded works. Almost all attempts time out. Notice that this happens even if using only the default firewall rules (which should be bypassed by the port forwarding as I read in other posts).
 
My second try was to create firewall rules manually, overriding the default ones. I tried adding rules from source WAN1 (where my connection is) to ANY and to SINGLE IP's on every port. Nothing seems to work.
 
I don't know what I'm doing wrong, this is really bugging me. I had to turn the firewall off so we can access our servers from outside the office. This shouldn't have to be done.
 
Just found out that my firewall is getting LOTS and LOTS of Blocked - SYN Flood entries. I think this is why we are having trouble with the firewall. Could this be the problem? I have no idea where all these SYN packets are coming from since they appear with spoofed IPs or come from different bots all over.

View 1 Replies View Related

Cisco Routers :: Does RV042 Router / Firewall Support Port Forwarding From Internet

Aug 5, 2011

I am using an RV042 router/firewall -- firmware v1.3.13.02-tm -- connected to a cable modem.I have one public address (WAN1) assigned by my ISP's DHCP server.All my machines on the LAN have static IPs.  (RV042 DHCP Server is disabled.)I have set up port (80) forwarding to 192.168.1.101 The HTTP port forwarding does work if an http client on the LAN sends a request to http://<public-ip>:80But I cannot get a response if I send a request to  http://<public-ip>:80 from a machine on the WAN.
 
I  did configure Access Rules to allow http traffic (and then tried to  allow *all* traffic) between a single IP on the WAN and 192.168.1.101 The  incoming log table shows a connection is made from the http client on the internet to the correct http server on the LAN, but there is no resonse  from the LAN to the remote client.Is my configuration the problem, or is this feature not supported by the RV042 router? Could my cable modem be blocking outbound traffic?

View 1 Replies View Related

Cisco Routers :: RV042 / Forward All Packets To Port 9000 From WAN To Single IP Address On Network?

Nov 2, 2011

I have a RV042 using (for now), just the single WAN interface. I am trying to forward all packets to port 9000 from the WAN to a single IP address on the network.  I've set up both forwarding rules under Setup -> Forwarding and under the Firewall -> Access Rules.I cannot connect to my device from the outside world, however.  Is there something I'm missing?

View 4 Replies View Related

Cannot Port Forward Or Open Port For Utorrent

Sep 18, 2012

I have only recently noticed a HUGE decrease in my Utorrent speeds, so i thought i would have a gander and lo and behold.apparently the port Utorrent uses wasn't open. Now, i have tried about 10 different port numbers, made sure Utorrent is being accepted by Norton 360 Firewall,followed complicated directions to (i think) foward ports, and also follow directions to open a specific port.Nothing has worked so far, Utorrent still comes back with a port closed error.

View 1 Replies View Related

Cisco Routers :: RV042 / RV042G / Small Business Routers With Inter-VLAN Capability

Aug 22, 2012

I was looking for a small business router that has VPN support and dual WAN support for load balancing. Upon reading reviews, I think RV042/RV042G is a good choice. Now am thinking if it supports intervlan/ router-on-a-stick configuration?

View 5 Replies View Related

What Is Open Port 49153

May 12, 2012

What is open port 49153 used for and how do I close it and any other open port that I don't know they got opened in the first place.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved