Cisco Routers :: RV042G - Gateway To Gateway VPN

Dec 19, 2012

I exchanged a RV042 v1.2 (Firmware 1.3.13.02) by a new RV042G v3. (Firmware 4.2.1.02).
 
My problem is now the following: The old RV042 established the Gateway to gateway VPN connection as soon as an IP- address of the remote location was requested. The new RV042G stays on „Waiting for connection“ all the time and does nothing at all. The connection works by clicking „CONNECT“ or by ticking Keep-Alive in the advanced tunnel settings but NOT automatically as before. Is this a firmware issue or have I to configure something additional?

View 1 Replies


ADVERTISEMENT

Cisco Routers :: Gateway To Gateway VPN Between RV110W And RV042G?

Mar 19, 2013

I am trying to set up a gateway to gateway VPN connection between a RV042G (central site) and a RV110W (newest firmware) which is used for presentation purposes on various customer's sites. The RV042G has a static IP. The RV110W has different IPs, depending on where it is used.
 
Basic VPN settings are clear to me (we have another VPN between two RV042G with static IPs). I set up the VPN connection on the RV042G wth the following settings for "Remote Group Setup":
 
Remote Security Gateway Type : IP + Domain Name (FQDN) Authentication IP by DNS resolved: mydomain.no-ip.org Domain Name: router12345
 
The value "router12345" is what I have configured in the RV110W as "Host name" in the network settings.
 
This configuration does not work so I am obviously doing something wrong. Do I have to use "router12345.mydomain.local" instead if I configured "mydomain.local" as the domain name in the RV110Ws network settings? For my tests the RV110W has a WAN-IP of 192.168.178.100 because it is located behind a DSL-Router. The external IP of this DSL-router is 178.0.x.x. The resolved IP  from mydomain.no-ip-org is 192.168.178.100 but when I look in the RV042G log I see the requests coming withg the external IP (178.0.x.x). Is this the problem? The last message I see in the log is "no connection has been authorized with policy=PSK".
 
Or can I use "IP + Email Address (USER FQDN) Authentication" instead (where can I enter this email address in the RV110W?). Or do I have to use "Dynamic IP"?

View 1 Replies View Related

Cisco VPN :: RV042G / 1721 - Gateway To Gateway VPN

Mar 23, 2013

I try to install a Gateway to Gateway VPN between a RV042G router (LAN1) and a 1721 router (LAN2). The VPN is connected. I can ping the devices from a LAN to the other in the two way.
 
But otherwise I can't access to the devices of LAN2 from LAN1 like with telnet, HTTP, mstsc, ....

And it is OK to access to the devices of LAN1 from LAN2....
 
Normally I access to all the resources of LAN2 with the Cisco VPN Client but i try to change it with this router. The firewalls are off on all the computers I look.

View 2 Replies View Related

Cisco Routers :: RV082 Gateway To Gateway VPN Not Resolving Remote DynDns

Feb 14, 2013

I've got two RV082's connected. Each has a dynamic IP (changes typically every few weeks). I've configured the tunnels on both ends with a local and remote "Remote/Local Security Gateway Type" of "Dynamic IP + Domain Name(FQDN) Authentication".If I look at the VPN Summary tunnel status, it shows an IP address of "mydomain.dyndns.org 0.0.0.0" under the "Remote Gateway" column heading. The Tunnel Test "Connect" button is N/A.I can resolve both of the mydomain.dyndns.org entries on both sides of each VPN using the Diagnostic DNS lookup tool within each router. If I hardwire a fixed IP address for the Local and Remote Gateway everything works just fine. VPN is good.
 
I just can't seem to get the "mydomain.dyndns.org" function to work. It appears the router can't resolve the dynamic IP from the domain names on each of the routers.

View 2 Replies View Related

Cisco Routers :: How To Manage Port 80 Hosts Via Gateway To Gateway VPN (rv220w)

Aug 30, 2012

I replace our aging rv082 routers with wireless rv220w routers. The gateway to gateway vpn works great, however I am no longer able to manage our print servers port 80 management page. I can ping any host with success, and I can manage hosts that have a port 10000 or 8000 web interface - but no port 80 ones... I had no issues when using the old rv082 routers...

View 0 Replies View Related

Cisco Routers :: RV220W Gateway-to-Gateway Inter VLAN Routing?

Jul 6, 2012

I picked up a pair of RV220W's and before I spent loads of time at a remote site, I figured I'd go through some VPN testing at home to make sure I could get it setup properly.  What this means is I've plugged the Internet uplink into a switch, then from the switch into both routers & configured them (using unique static IP's for each) from there.  For what its worth: While I have some IT experience, I don't have strong networking experience.
 
I setup several VLAN's on the local RV220W, and the end result is to make it so that an asset at the remote site with an IP in any of the ranges (192.168.121.0/24, 192.168.131.0/24, 192.168.141.0/24 and any future VLANs) can communicate with/access resouces at the local site.  Likewise, an asset at the local site with an IP in any of the ranges (.121, .131, .141 + any future VLANs) should be able to reach the remote resources (currently just 192.168.181.0/24, but future VLANs as well).
 
This evening I tried to focus on the relevant VPN pages of the Administration Guide to get the VPN up.  Leaving the defaults I got as far as establishing a link between both sites and it seems that things are working right: From the remote site (.181) I can access the local site (.121, .131, .141); and from the local site I can at least ping resources (a laptop) on the remote site. (Yay!)
 
However, when I physically connected an asset that had a 192.168.121.X, 192.168.131.X and 192.168.141.X IP addresses to the remote RV220W (which is 192.168.181.0/24), I couldn't see it from the remote or local sites.I assume this is expected.  But I'm reaching out to the community to see what other possibilities might be available becuase networking is a weak area for me.  I figured it might be something like a Static [or Dynamic] Route but I really am not 100% sure.
  
'TECHNICAL' SPECS
 
 Local Router LAN/WAN Settings:
LAN IP: 192.168.121.1 on default VLAN (1)
VLAN 13 defined 192.168.131.1 with DHCP enabled; Reservations created outside of DHCP scope
VLAN 14 defined 192.168.141.1 with DHCP enabled, Reservations created outside of DHCP scope
Inter VLAN Routing enabled for all VLANs

[URL]

View 7 Replies View Related

Cisco Routers :: RVS4000 To Use A Gateway To Gateway IPSec Tunnel

Oct 17, 2011

Can I have use a Gateway-to-Gateway IPSec tunnel whereby a user can surf the Internet using his local Internet connection and at the same time connect through the IPSec tunnel to a remote subnet using RVS4000 routers?

View 1 Replies View Related

Cisco Routers :: RV042 Gateway To Gateway Tunnels Not Reconnecting

Apr 11, 2013

I have two Cisco RV042 Routers, they are being used to connect two offices, i have created a standard gateway to gateway connection, fixed public ip addresses on both sides and everything works fine, except when the tunnel gets disconnected, it does not connect back automatically, i have to log into either  router console and click the connect button to get the tunnel working again, this is really annoying since it happens once or twice a day at least.

View 2 Replies View Related

Cisco Routers :: RV016 Gateway To Gateway RV082 Won't Connect

Mar 9, 2012

New hardware here, requesting a bit of your knowledge, We are tryingin to setup a simple gateway to gateway  VPN
 
HomeA Has an RV016 with a public static IP
Local Group Security Gateway type is IP Only with the IP
Local Security Group Type is Subnet, with the local IP class 192.160.0.0
Remote Security Gateway Type: Dynamic + Email
Email address  some@emailaddress.com
Remote Security Group Type: Subnet
IP Address 192.168.1.0
IPSec Setup as default with nice password.
 
HomeB has an RV082 with a dynamic ADSL link
Local Group Security Gateway type is DynamicIP +Email
Email address  some@emailaddress.com
Local Security Group Type is Subnet, with the local IP class 192.160.1.0
Remote Security Gateway Type: IP Only
Remote Security Group Type: Subnet
IP Address 192.168.0.0
IPSec Setup as default with nice password.
 
The idea is for HomeB which has a dynamic IP, to reach HomeA, which has a static IP and connect. But they just wont. I have not clue what's wrong, I followed the instructions, maybe i miss interpreted something. I could share the VPN logs for both., Im getting a lot of errors there.

View 2 Replies View Related

Cisco Routers :: Getting VPN Gateway To Gateway With NAT For Multiple Subnets / RV082?

Feb 11, 2012

I have a pair of RV082 routers and I'd like to configure gateway to gateway VPN tunnel as described in a cookbook, "How to configure a VPN tunnel that routes all traffic to the Remote Gateway," (file name Small_business_router_tunnel_Branch_to_Main.doc).  I followed this cookbook and found that my while the Main office has internet connectivity, the branch subnet doesn't have internet connectivity. 
 
Routing does behave as advertised, where all traffic does go to the main office.  However, the 192.168.1.0 subnet in the branch office does not get internet connectivity.  I've read in other posts that the Main office router will only provide NAT for the local subnet, not the branch office subnet.  Is  there a way to configure the RV082 router to provide NAT for all subnets?
 
If not, which Cisco product will provide the VPN Tunnel connectivity as well as the NAT for all subnets?  Can the RV082 be used as part of the final solution or are my RV082s a  wasted expenditure?

Following is the configuration that I'd implemented, (real IP and IKE keys are bogus). 
  
Gateway To Gateway    
Remote                                                   Main Office
 Add a New Tunnel
Tunnel No.                  1                                               2
Tunnel Name :               n1-2122012_n2-1282012        n1-2122012_n2-1282012
Interface :                  WAN1                                    WAN1

[code].....

View 2 Replies View Related

Cisco Routers :: RV8082 Setup A VPN Tunnel With Gateway-to-Gateway

Apr 8, 2012

I have two Cisco RV8082 Routers which I would like to setup a VPN Tunnel with Gateway to Gateway.  One location is a static IP Address.  The other location is a dynamic IP address.

View 2 Replies View Related

Cisco Security :: Rv042 Vpn Openswan Gateway To Gateway Linux Unbutu

Sep 13, 2012

config setup
protostack=netkey
klipsdebug=none

[Code]....

View 3 Replies View Related

Linksys Wired Router :: RV082 Gateway To Gateway VPN Not Connecting?

Jan 24, 2012

I recently swapped out an RV082 with a newer model (still RV082 but black and a different interface). I configured the Gateway to Gateway VPN exactly as it was before but none of the three other RV082's will connect. I have tried deleting the connections several times to no avail. I have aggressive mode disabled and have tried with the firewall on and off. Below are the settings (IP's have been X'd out) and the log.

Settings:
IP OnlyIP Address : X0X.X0X.20.31Local Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask :  Remote Group Setup
Remote Security Gateway Type : IP OnlyIP AddressIP by DNS Resolved : Remote Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : AES-192AES-256AES-128 AES-192AES-256  AES-128 IPSec Setup3DES  Keying Mode : ManualIKE with Preshared keyPhase 1 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 1 Encryption : DES Phase 1 Authentication : MD5SHA1Phase 1 SA Life Time : secondsPerfect Forward Secrecy : Phase 2 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 2 Encryption : NULLDES3DES Phase 2 Authentication : NULLMD5SHA1Phase 2 SA Life Time : secondsPreshared Key : Minimum Preshared Key Complexity : EnableLOG:

[code].....

View 1 Replies View Related

Linksys Wired Router :: VPN Gateway To Gateway With Two RV042 Constantly

Jul 11, 2012

My two RV042 , one at home and the other one at my working site, constantly lost VPN connection after successfully connected.Both Firmware are identical. [code]

View 1 Replies View Related

Linksys Wired Router :: RV042 Gateway To Gateway Connection?

Feb 8, 2011

we do have 2 Rv042, one in my office and one in my house.. in the office we do have static ip and at home none.. question is can i connect the two RV042?

View 1 Replies View Related

Linksys Wired Router :: RV042 - Gateway To Gateway VPN Connection

Mar 22, 2011

I have some problems in my network with Gateway to Gateway Vpn Connection using two Rv042 routers.
 
I cannot ping the computers with static ip configuration.
 
In local an remote computers who have DHCP ip configuration i can ping each other .

View 1 Replies View Related

Linksys Wired Router :: RV082 Gateway 2 Gateway VPN Can't Ping

Jul 26, 2012

We have a VPN setup between two Cisco RV082 routers, the VPN status shows as connected however I can't ping the other network.  I am unable to ping between routers, let alone ping computers behind those routers. 
 
We have 2 branches, branch 1 is on a static IP and branch 2 is Dynamic.  I am able to connect via QuickVPN from Branch 2 to Branch 1 and remote desktop to computers, however have yet to VPN/remote desktop in the opposite direction.
 
To me it seems like a firewall issue at branch 2, but what's causing this.  Also they are currently running 2 differnet firmware version not sure if this would cause a problem.

View 1 Replies View Related

Linksys Wired Router :: RV042 / Setup A Vpn Gateway To Gateway

Apr 6, 2013

i am trying to setup a vpn Gateway To Gateway  when i setup the vpn i can ping  the 2 rv042 i cant see any computer in the network places when there comect we need to see the computer in the network places so are pos will run?

View 1 Replies View Related

Cisco VPN :: WRVS4400N VPN IPsec Gateway To Gateway Setup?

Jan 29, 2012

Just bought 3 WRVS4400N, I wanted to setup gateway to gateway VPN.  I followed the instructions on the WRVS4400N admin guide and VPN does not connect.  I also downloaded the VPN setup wizard and that also did get the gateway connected.  Everything seems to be correct.  Do I have to enable anything else?  Firewall setting?
 
Below is my config.
 
IPSec VPN Tunnel: Enabled
Tunnel Name: TUN01 
Local Security gateway: IP only
WAN1 IP: 192.168.100.1
SUBNET: 255.255.255.0
Local Security type: subnet
LOCAL IP: 10.10.10.1
SUBNET: 255.255.255.0

[code]....

View 1 Replies View Related

Linksys Wired Router :: RV0XX Gateway To Gateway VPN?

Mar 6, 2011

I have an RV082 and a RV042. I have been able to successfully establish a gateway to gateway vpn connection between them both, and I can remotely administer each router through the VPN connection, but I am unable to ping computers from one side of the connection to the other. For example, a computer in the 10.10.1.0 subnet can't see / ping / communicate with a computer in the 192.168.1.0 subnet. 
 
Below are the configurations for each. Aside from the static IP configurations and the VPN configurations, no other changes were made to the routers. RV082 DHCP Enabled Tunnel Status: Connected Local Group Setup
 
IP Only: X.X.X.66Local Security Group Type: SubnetIP Address: 10.10.1.0Subnet Mask: 255.255.255.0Remote Group Setup

View 1 Replies View Related

Cisco :: OSPF - Router As A Gateway And Has An Own Gateway?

Jan 29, 2013

Can a router using OSPF propagate that he is a router with default-information originate... at the same time when he got an own gateway of last resort to an IP-adress? If so, how? I can't get it to work.

View 8 Replies View Related

Cisco Routers :: RV 042 - Client To Gateway VPN Set Up

Nov 8, 2011

I have a RV042 and I am trying to setup a Client to Gateway VPN for about 12 to 15 remote users. These users travel a lot and need to connect to the server. I have never setup a vpn and have looked at the manual and set it up like it says to. I installed the Quick VPN client on the remote computer and copied the certificate to the remote computer.
 
I am having two problems.

1. When I run the client on the remote computer and try to connect it tells me the cert is not installed on the local computer. (it is copied to the root program directory C:Program Files Cisco Small Business and the sub directory, C:Program Files Cisco Small Business Quick VPN Client. 
2. I can continue and it acts like it's connecting but it does not. If I look at the router VPN summary it shows that I connected for only a brief time.

View 1 Replies View Related

Cisco Routers :: RV042 502 Bad Gateway CGI Was Not CGI / 1.1 Compliant

Mar 31, 2013

I've got half a dozen RV042 routers in various locations.  They are running v4.0.0.07.  Seemingly randomly, I got the 502 Bad GatewayThe CGI was not CGI/1.1 compliant. error when attempting to log into the web interface with google chrome (same with IE too).  This happens from the LAN side.  I actually didn't notice it until my Opsview monitoring software threw up a critical when it didn't get an http response. The router is otherwise actually working just fine.Since the first occurrence, more of my routers have developed the same error.
 
I've tried different browsers, clearing caches, though I'm not surprised those efforts were fruitless, as there is clearly a problem even when no browser is involved (nagios).  The nagios http check also returns a 502 Bad Gateway.

View 7 Replies View Related

Cisco Routers :: RV110W - Can't Set A Gateway For VLANs

Feb 5, 2012

I'm having problems setting up VLANs on my RV110W Small Business Router. I have updated the firmware to the latest : 1.1.0.9 Here is my set up :
 
WAN settings :
IP : 192.168.1.252 / 255.255.255.0 - Gateway 192.168.1.254
 VLAN1 (default) :
IP : 192.168.2.254 / 255.255.255.0
 VLAN3 (test) :
IP : 192.168.16.254 / 255.255.255.0
 
Inter-VLAN routing option is checked.
  
Symptoms :

- The communication from VLAN1 to WAN is fine

- The communication from VLAN3 to VLAN1 is fine

- The communication from VLAN1 to VLAN3 is not working
 
My routing table is :Routing table Entry ListDestination LAN IPSubnet MaskGatewayInterface192.168.2.0255.255.255.0192.168.2.254LAN192.168.1.0255.255.255.0192.168.1.252WAN192.168.16.0255.255.255.00.0.0.0LAN0.0.0.00.0.0.0192.168.1.254WAN 

As you can see, the gateway for VLAN3 is set to 0.0.0.0, which is wrong I believe. I don't know how to update that. I tried to add a a static route for the subnet, but the router did not let me do that.

View 1 Replies View Related

Cisco Routers :: Setup Vpn Gateway Between Two RV120W

Nov 6, 2012

I gave setup a vpn gateway between two cisco RV120W. The connection is established.
 
Active IPsec Security Association Table: Policy NameEndpointPacketsKBytesStateActionRxTxRxTxVPN-INTERDIO87.65.38.62000.000.00IPsec SA Established Poll Interval: (Seconds)
 
The problem is that there is no trafic. Even ping te remote internal nework is not working. For testing i have disabeld at both sites te firewall and have configured both with an access rule any to any.

View 1 Replies View Related

Cisco Routers :: Set Up RV042 As VPN Gateway For Client

Aug 29, 2011

I set up an RV042 as a VPN gateway for a client a year ago. It is running firmware 1.3.12.19-tm (Feb 13 2009 13:03:21). I created a new certificate. When I download the client certificate, It comes as a .zip file. One the can not be opened by a zip utlity (windows, Winzip or 7 zip). It looks like I can just rename the file to a .pem file, but I want to make sure that is right. They were getting QuickVPN timeouts, but that looks like it was fixed in 1.3.13.

View 3 Replies View Related

Cisco Routers :: RV042 Not As Default Gateway?

Apr 11, 2012

I have RV042 on my remote network, i have problems with VPN connection ,  user can connect to RV042 but only inside IPs that can ping from vpn user.Is it any  way to make the traffic from Rv042 will back to RV042 . maybe with nat.. in example below 192.168.5.100  is my lan IP from my DSL dhcp, and 172.27.0.20 ip on remote, traffic not back to my pc/vpn client, what i want is to translate 192.168.5.100 to RV042 LAN ip address
 
1485: ICMP echo request (len 32 id 256 seq 29) 192.168.5.100 > 172.27.0.20
1486: ICMP echo reply (len 32 id 256 seq 29) 172.27.0.9 > 192.168.5.100
1487: ICMP echo request (len 32 id 256 seq 30) 192.168.5.100 > 172.27.0.20
1488: ICMP echo reply (len 32 id 256 seq 30) 172.27.0.9 > 192.168.5.100

[code]....

View 3 Replies View Related

Cisco Routers :: IPS License For SA540 Gateway

Apr 5, 2013

We have just purchased a license L-PL-GW-100MAX-3= Protect Link Gateway: Unlimited Web + 100 Max Email Seats,3YR. I found that it does not include IPS license. I cannot find anywhere where I can purchase an IPS license for SA540 gateway. It seems to be available only as a bundled product when purchasing the hardware.

View 1 Replies View Related

Gateway To Gateway VPN Not Working Now

Jan 10, 2012

Issue with my Gateway to Gateway VPN connection. I have outlined the settings for both sites and I feel I should mention that this was an established connection that was working until I came in this morning. Nothing has changed (as far as I know) but for some reason I am not able to reconnect. Can you see any reason why this would be? Of course I've changed the WAN IPs and Shared Key for security purposes.

View 2 Replies View Related

Routers / Switches :: Add Public IP To Gateway Machine?

Apr 4, 2011

I have a public IP (static). I have a Gateway machine which is connected through a modem. When I want to add that public IP to the Gateway Device through [URL] site.

View 3 Replies View Related

ClearOS 5.2 Gateway - Cannot Access Routers Via Browser

Jun 9, 2012

Just set up a ClearOS gateway - internet works, DNS everything OK.I can ping the two routers (set up as switches) but i cannot access them via the browser from my PC (CYLON). I CAN access ClearOS panel from my PC?

View 1 Replies View Related

Cisco Routers :: RV220W Cannot Reach Gateway Or Any Host Behind It

Oct 31, 2012

I have created a connection gateway-to-gateway between RV220W and RVL200, is doing without any problems.For example, I can ping the gateway on the other side. But when I connect trough RV220W QuickVPN (or PPTP) I can not reach the gateway (RVL200) or any host behind it.

View 4 Replies View Related

Cisco Routers :: RV042 QuickVPN / Gateway Not Responding

Jun 28, 2011

I have router Linksys RV042 v1.2 with latest firmware Version: 1.3.13.02-tm. And I'm using QuickVPN v 1.4.1.2. I've setup VPN connection with values, below: But every time I'm trying to connect to router by VPN it always popup a window "Remote Gateway not responding".It occurs when I'm trying to connect to VPN behind other router, when I'm connected directly to Internet the connection is established.But I'm connecting to other networks using VPN and it's working properly (behind the same router), so I think it's problem with RV042 configuration but I don't now weher.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved