Cisco Routers :: RV215W With HUAWEI E398 Usb Modem?
Jan 16, 2013I'm trying to setup a Huawei E398 from Swiscom (switzerland operator) and my CISCO RV215W cannot detect him. Is the RV215W compatible with the Huawei E398 USB LTE Modem?
View 2 RepliesI'm trying to setup a Huawei E398 from Swiscom (switzerland operator) and my CISCO RV215W cannot detect him. Is the RV215W compatible with the Huawei E398 USB LTE Modem?
View 2 RepliesI need support with the RV215W. It won't recognize a Huawei E398 LTE-Stick (Germany: Telekom Speedstick LTE). According to [URL] the RV215W should support the Speedstick LTE.
Router Firmware: 1.0.1.1 (newest) E398 Firmware: 11.433.61.10.55 (newest from Telekom)
is the SRP541W compatible with the Huawei E398 USB LTE Modem? If not, will it be compatible in the near future?
View 4 Replies View RelatedThe RV215W is not responding to the https port, the VNC port 5900 is also failing to respond. VPN still works, I will go in and reboot and it will work again. It works for 1 day and fails to connect again.
Latest Firmware is already install, I don't know what else to do.
I just switched from a Linksys Router to the RV215W, I was able to put custom dns servers for my wan, ie. opendns, but now in cisco, I'm missing this feature.
Does any one know how to set-up a workarround with DHCP from my ISP and access custum dns servers..
When are we gonna have this feature implemented in the WAN secction.
Recently I bought RV215W router and after installing it in my home network; I started experiencing very slow internet connection over wi-fi. Wired connection to this router are working fine. After several hours of trouble shooting, I am able to isolate the slow internet issue to Wirelss N connection. Wireless b/g works fine.
Router is using 1.0.0.16 firmware. I tried to check is there any latest firmware upgrade for this device. Couldn't find any firmware related information in cisco web site.
One another point related to USB WAN; I am not using any USB for 3G connection. USB indicator is keep on blinking.
After connecting ZTE636 USB modem to Cisco RV215W the modem is not recognized, even though it is on the compatible modems list. The stick is from Orange PL. Firmware upgraded to 1.1.0.5.
View 1 Replies View RelatedI am thinking about buying one of the 2 routers i have listed above. I have some concerns though.
First off what are the MAJOR differences between the two? (they look the same to me)
Do they both contain PPTP and is it simple to configure? Do i need any kind of special client software? Can i use my iphone and ipad to connect to the vpn server. Is there a minium download/upload speed to have a vpn sever?
I've tried to download the .docx document to both Win and Mac computers. On both platforms MS Word complains that the document is corrupt.
View 5 Replies View RelatedRV215W router port forwarding not working.Port forwarding works for a short period of time, then stops working. Reboot router, works again for short period of time, then stops again.
I have updated firmware to latest. I had seen other similar bugs posted for 220 and I think 180, not sure if this router has similar bugs and waiting for fix release to firmware.I had recently purchased two, one deployed, will hold off on other now because of issues, and may have to move to different unit if a resolution not found this week.
I have a Cisco RV215W and i want to create inbound rule (wan -> lan) with ip control.I ha created in "service management" a new service (rsync on 873 start port and and port) After i had created a new access rules :
[code]...
I am using a USB Modem from HUAWEI Technologies to use internet when im not on a wifi zone.. The Internet Speed is kinda slow (512 kbps), so I configured my browser to go through a proxy to make it a lil bit faster (2mbps now)..Everything works fine except that I couldn't connect to https sites (gmail, facebook, eBay, etc)
View 3 Replies View RelatedI am connected to the internet using a Huawei wireless USB modem connected to my desktop computer(no other type of service available) I would like to set up a Wifi home network so that I can connect using Wifi to all of the other gadget that I have in the house. So the question is can I connect a Wifi router using a ethernet cable comming from my desktop computer? and if so what router would you recommend for this application?
View 4 Replies View RelatedRegion : Finland
Model : TL-MR3220
Hardware Version : V2
Firmware Version : Newest
ISP : Sonera
I have a TP-Link TL-MR3220 and Huawei E3276 USB-modem (Sonera, Finland)Is there some update or advices, that can i use this huawei with MR3220? Or when update releases?
I wanted to know whether Huawei EC159 usb modem is compatible with ASUS router RT-N56U as I want to be sure before going for it..!
View 3 Replies View RelatedRegion : Finland
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version : 3.14.2 Build 120822 rel.577775n
ISP : saunalahti
dosen't support my huawei E392 4G modem. if possible would you make bin for this. there is not other modems that you can get for 4G connections from the service provider so it would be nice if there was more compatibility than some old ancient modems. starts to feel like this is been sold as 4G router and dosen't actually support that at all.
That's y topology:
(TPLINK) /////////////// (Huawei)--->(internet)
...................wirless................cable
I want to configure my tplink modem on a repeater mode in order to repeat the signal from (Huawei) ...
My SRP526W (running the actual firmware 1.01.27) didn't recognize my new Huawei E372 USB dongle (it's a T-Mobile web'n'walk Stick Business II, already installed the newest firmware 11.203.03.10.55).Using a Huawei E172 or a Huawei E353, both USB dongles works well. But they are slow compared to the E372. I'd really like to use the E372 stick because it's super fast with up to 42Mbps download speed.As I could read in the release notes of the SRP526W, the Huawei E372 should be supported since firmware version 1.01.26.Inside the Huawei E372 you can find the printing "Model: E372u-5", maybe this is a different model which is currently not supported by the SRP526W.
View 0 Replies View RelatedI currently own 2 wifi routers which have 4 lan ports on the back. In my room i have two desktops without wireless capability. I was wondering is it possible to have one router in my room which my desktops plug into - and then the router to ""Bridge" with the one downstairs to give me wireless capability. I believe its called bridging but i have had no hopen as of yet. Huawei HG520b and Huawei HG532 are my two routers. I know this can be done by purchasing a wire - but i cannot afford a 100m cable and i am not particularly interested in purchasing an adapter for my desktops.
View 6 Replies View RelatedI tried to bridge two wireless routers wirelessly, but after extensive research I came to the conclusion that this wasn't possible.
Now I am trying to connect these two routers through a cat5 cross-over cable and I wanted to know whether can I disable DHCP on the router which has internet, and enable the DHCP of the router which is connected to the printers, because I have a few systems that shouldn't be connected to the internet.
What I had in mind is if I switch the DHCP OFF on the internet router and turn it ON on the Huawei B683 router, I could add those devices' MAC addresses to the internet gateway router to deny them access to the internet..?
I have a Huawei 523a Router at the moment and I'm trying to setup a IP camera.The Router doesnt allow port forwarding, so my question is can I add another Router onto the Huawei router to allow the second one to work my camera
View 10 Replies View RelatedI Echolife 520b, can not enable wireless network in the menu Basic Wireless LAN option is missing
View 1 Replies View RelatedMy Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies View Relatedeverything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.
View 1 Replies View RelatedIn my office we have concrete walls and very limited wiring. The way it is set up is we have a Verizon DSL Modem that comes in then I have a router with it that splits the signal to 4 other routers that each split the signal 2 to 3 more times. I have to use routers so that it assigns IP addresses.I bought a new D-Line N300 Wireless router with USB imput. I want to attach my Home Media Network Hard Drive Cloud edition to the 1st router (attached to the modem) and then share the data off that hard drive with everyone connected to the sub routers.
View 4 Replies View RelatedI have connected Huawei switch with Cisco switch using one single fiber with LX SFP. The port is up on one side (Blinking on Huawei side) and down on Cisco side..
View 2 Replies View Relatedour house have a lot of rooms and think walls and the router set up in my room is giving only 2 signal bars in other parts of the house. i already have 2 routers and planning to place the 2nd router in the living room using a long cord. can i use 2 routers in one modem?
View 1 Replies View RelatedI have successfully got QuickVPN working from Windows 7 64bit into my WRVS4400n. The router is sat behind another router/modem (Belkin) as the UK uses PPPoA and the WRVS4400n doesn't.So I set up DMZ and changed the DHCP to always allocate 10.x.x.2 on the Belkin which is the WAN side for the WRVS4400n as it is the only thing attached.I have now noticed, and I'm not sure whether it was the case before, that the DNS that the WRVS4400 is showing is the LAN address for the Belkin Modem/Router (10.x.x.1), not 192.x.x.1 for the WRVS4400n itself. I assumed setting the Static DNS 1 on the WRVS4400n would do it, but it didn't?When I connect into the network with QuickVPN, the computer names do not show even though I have selected the option in QuickVPN?
View 1 Replies View RelatedI buy the Huawei K3765 USB Modem (unlocked, so I can use all operators).
After I plugged it in, it installed the Mobile Partner Software succesfully. The phone and SMS function is running well. I can call and text someone through the modem.
But the problem is when I tried to connect to the internet it shows error message:
Error 31: A device attached to the system is not functioning
I have tried the modem on another computer (Windows XP and Windows 7 Home Premium 32 bit too) and it worked well. For information my notebook is ASUS K42JR, OS Windows 7 Home Premium 32bit.
I have BSNL optical fiber broadband connection with Huawei EchoLife HG850a ONT. I want to configure my ONT to control internet access of any individual system which is connected to this ONT by switch.
View 2 Replies View Relatedi have a wa1003a wifi modem and the light of wireless is working but no range is shown by my laptop?
View 8 Replies View RelatedI can connect to the internet using a huawei dongle on three mobile broadband. But recently having trouble loading web pages. I get the message- dns server isn't responding. I have contacted three who changed settings on my pc through remote access, but I still have the problem although it doesn't seem as bad, i can view more web pages before getting the error message.
[code]....
I'm following this tip, but how do you access the second router (Cisco E2500) settings? I always get sent to the first router.
View 4 Replies View Related