Cisco Routers :: RV220W Upgrade To 1.0.4.17 - Now Remote Desktop Won't Connect

Sep 16, 2012

Or rather, it will connect within the first few minutes after a router reboot, but eventually is kept from connecting.
 
All settings look good. Upgraded from 1.0.3.5.  Prior to upgrade, this was not  problem.

View 3 Replies


ADVERTISEMENT

Cisco Routers :: RV220W Remote Administration Not Working

Oct 26, 2011

RV220W is at firmware v1.0.2.4 From: Administration / Management Interface / Web Accesss I have configured remote Management: Remote Management [x] EnabledAccess Type: All IP addressesPort Number: 8888Remote SNTP  [  ] not enabled
 
From within the LAN side I can connect to the router and administer via https://192.168.3.97:8888
 
Status / System Summary reports:WAN (Internet) Information (IP4)
Connection Type: Static
Connection State: Connected
IP Address: 207.180.139.242
NAT:  Enabled
But from the WAN side (using the same Win7 computer) I cannot connect via:  https://207.180.139.242:8888
 
This used to work.   Also not working:  PPTP logins.   ISP is RCN via cable modem, fixed IPs.
 
Have tried power cycling router - no luck. Have tried from PC with AV off and Win7 firewall off

View 5 Replies View Related

Wireless :: Remote Desktop Can't Connect To Remote Connection

Mar 9, 2011

On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.

View 1 Replies View Related

Cisco Routers :: RV220W Remote PPTP VPN Connection Fails?

Jan 23, 2012

i'm having problems connecting to my RV220W using PPTP. The first time I set up PPTP on the box, everything worked just fine. Now, however, PPTP just won't work. No matter how I try to tweak various settings on the router, the connection fails. I have tried connecting with Windows 7, Android and OSX with no success.The router came with version 1.0.1.0, and I have tried downgrading to 1.0.0.26 and upgrading to 1.0.3.5, but alas, I can't seem to make PPTP work again.

View 1 Replies View Related

Cisco Routers :: RV220W Reports Remote Gateway Is Not Responding

Aug 30, 2011

I've just set-up one of the RV220W VPN solutions. This worked fine for a while, but now it reports the remote gateway is not responding. Other clients can connect, but not the computer I'm using at home.
Log file reports:
 
2011/08/31 21:10:31 [STATUS]Success to connect.
2011/08/31 21:10:31 [STATUS]Tunnel is configured. Ping test is about to start.
2011/08/31 21:10:31 [STATUS]Verifying Network...
[code]... 

I've tried the most common stuff. Enabling ICMP, checked that remote administration runs on port 443, changed MTU to 1400 manually, It allows fragmented packages too. Checked that IKE and IP Sec services are running. I've also tried both with windows firewall ON and OFF. A colleague of mine had the same problem in the same time frame as me, but after a while - he suddenly was able to connect. I still can't!!

Firmware Version: 1.0.2.4 
Edit: IP is not real.   

View 7 Replies View Related

Cisco Routers :: RV220W - Upgrade To 1.0.4.17 Failed Due To Invalid / Corrupted Firmware

Mar 10, 2013

I have a RV220W running 1.0.1.0. When trying to upgrade to 1.0.4.17 I receive an error: "Upgrade failed due to invalid/corrupted firmware".
 
I found this article: [URL]
 
I assume I have to do a factory reset then an upgrade in order to upgrade properly.
 
If I do a backup running 1.0.1.0, then upgrade to 1.0.4.17, then do a restore, would that put me back to 1.0.1.0?  I'm trying to avoid configuring the router manually all over again. 

View 1 Replies View Related

Cisco Routers :: RV220W V1.0.2.4 Remote Management / Load Balanced Proxy Fail?

Sep 26, 2011

I just purchased 5 RV220W to act as internet/wireless router at a remote site. There is no VPN, just LAN and Wireless routing to the internet.I have setup remote management and it works fine when I am directly connected to the internet. However, everytime I try to connect through our HTTP/HTTPs proxy farm, it usually fails. Specificially, I get the log-in page and can log in. It starts to render the landing page but redirects to a page stating "Your session has been terminated." On rare instances the first page will appear, however within a few clicks I end up with the same terminated page.
 
As a test, I bypassed the farm and forced my browser to use one proxy exclusively. At that point I could access the HTTPS interface with no issue. I have not had any issues with other SSL sites with the proxy configuration in use.Is there some sort of MITM prevention I could be running into? If so, can it be turned off.I am new to the RV-series of routers. Is there any logging I could turn on that would provide insight on why the session may be getting terminated?

View 2 Replies View Related

Routers / Switches :: Remote Desktop Access From It?

Mar 7, 2012

how can I remote in to my router and I need to get past my router to my pc desktop

View 2 Replies View Related

Cisco Routers :: WRSV4400N / Remote Desktop Through Windows VPN?

Mar 24, 2013

We have a WRSV4400N installed as our primary NAT Firewall.  It is configured to allow Windows VPN connections to our server residing on the Internal Network Domain - this works fine.Problem is that even though the remote VPN client can open shares, browse the internal network, and resolve computer names fine with DNS,  but... Remote Desktop will not connect using the VPN tunnel.We need this to work... I spent several hours with your support people when installing this router a year ago and got nowhere.  And everythung else works fine.I am using Windows server-based VPN because your VPN Clint didn't work ata ll either. Can you perhaps give me a list of configuration settings to check?

View 3 Replies View Related

Cisco Routers :: Windows RDP Remote Desktop Not Working With WRVS4400N

Nov 16, 2010

I use RDP extensively on my LAN to use and manage 4 PCs running Win XP or Win7. My consumer-grade Cisco Linksys WRT610n crapped out after less than 2 years, so I thought I'd try the Cisco WRVS4400N to gain extra features like VPN. I have not enabled anything new on the router except for adding a second wireless SSID for guest use, although no bandwidth management or VLANs have been set up yet. Firmware version is 2.0.0.8.Since installing this router I have been unable to use Windows RDP on ANY of my computers on the LAN, whether I use the machine name or the IP address. I can ping every device on my network - print servers, NAS boxes, PCs, but no RDP. WHAT'S GOING ON?

View 6 Replies View Related

Connect To VPN On Remote System With Desktop?

Jan 15, 2012

We use Nortel VPN and the problem is that it's set so when you connect to it, you can only access company resources so no Internet. To mitigate that we use vmware and run Windows XP at the same time as our Windows 7 systems. I'd love to be able to use remote desktop though and connect to a system located elsewhere even another office computer and have that one on the VPN, but of course as soon you connect the remote desktop connection goes down with it.I'm just wondering if there's any ways around this. I'm assuming not, but I'm not sure how VPN fully works. Like if I had 2 network cards in the remote system, when I VPN in does it block connections from all network cards? Ideally I'd like to use something like Amazon Web Services since their Windows Server tier has the free option which is good, or will use another VPS type system running Windows Server.

View 3 Replies View Related

Remote Desktop Cannot Connect To Computer

Jun 5, 2011

I am trying to use my computer running Windows XP Home to remote desktop into my computer running Windows 7 Ultimate over the internet.The computer I am trying to connect to is listening on port 3389, has all sort of firewall exceptions sorted and is enabled to accept remote connections. The computer I am trying to use to connect has no firewall currently (I have disabled it just to get this working).

And yet when I try and connect using the ip address of the host computer I receive the message "remote desktop cannot connect to the remote computer for one of the following reasons"... and so on.

View 4 Replies View Related

Servers :: Remote Desktop Can't Connect?

Aug 23, 2011

Remote Desktop can't connect, so I've got four servers in the same LAN. Whenever I try remotly access the web server, the message (Remote Desktop can't connect to the remote computer for one of these reasons: 1. Remote access to the server is not enable. 2. The remote computer is turned off. 3. The remote computer is not available on the network) The thing is that I can connect to all servers with any desktop computer in the network, but when I try to do it in my laptop (that is connected to the same LAN) I've got access to the other servers but not to the web server. Sometimes I had to restart this server and works fine for a little while.

View 1 Replies View Related

Cannot Ping / Remote Desktop Connect Via VPN

Sep 9, 2012

I am having problem connecting to my work PC via VPN Cant ping and RDP. I sometimes need to log into my work PC to check out a problem. I connect via VPN and I can access servers (using Citrix and local intranet sites) that can only be accessed once connected to my work domain. So it looks like the VPN actually works fine.

But I cannot Remote Desktop Connection to it. I also tried to ping the PC using a command prompt. Using the command prompt, I ping MyWorkPC And I can see that it tries to ping MyWorkPC.domain.name.co.za. So it looks like it sees the MyWorkPC on the network. But all pings fail.

A work colleague tried to remote connects to MyWorkPC from his home PC and he can successfully connect. So I do believe that the work network and PC is setup correctly. I am running window 7 Ultimate SP1 (32bit) with a 3G dongle in a router. I also have Avast antivirus installed on my PC. I was not sure if the router or the antivirus was the issue so I tried:

1.Removing the 3G dongle and attach it to my USB port on my home PC directly. No luck
2.Some blogs said that the P2P or IM shield on Avast might be the problem so I disable it. No luck
3.Then I uninstalled Avast completely to see if it has any shield that might still block it. I restarted. No luck

View 2 Replies View Related

D-Link DIR-825 :: Remote Desktop Will Not Connect Via It Over LAN

Jan 10, 2012

I am attempting to set up a remote desktop connection to my home media server so I no longer need to keep a keyboard, mouse, and monitor plugged in to it when I need to use it.  I am running Windows 7 Home Premium on both systems.  I am sure the firewall is not the problem, as I have tried to connect with it disabled.  I have also made sure to allow remote connections on the server.  I know the DIR-825 supports UPnP, which works with Remote Desktop, so there should be no problem, but something is not working.  I have tried disabling UPnP, setting up a virtual server, port forwarding, and assigning a permanant IP to the server, to no effect.  Something is blocking my remote connection requests.  Keep in mind, I am not even trying to do this over the internet, just over my LAN! 

View 4 Replies View Related

D-Link DIR-655 :: Cannot Connect Using Remote Desktop Connect From External PC

Jun 16, 2011

I'm trying to connect to my home laptop from work.  The home laptop is connected to DIR-655 router.  I set up the internal and external ports to 3389 using both TCP and UDP protocols with the Application as "Remote Desktop".  From my work PC I enter the external IP with :3389 and it fails to connect. I have also tried accessing internally which is failing too.  All computers are running Windows 7 Home Premium Remote Access is enable on all.

View 1 Replies View Related

Can't Connect To CCTV Box Via VNC - UVNC Or Remote Desktop?

Aug 22, 2011

I have a PC that runs cameras covering the access to my house ( due to an earlier incident where someone thought my stuff would look better at their place ). It has been running fine with XP and a VIA C3 box for years, but the mobo died and so my woe begins...I have slapped together a D510 box with W7 32 Enterprise, but cannot get it to network properly. ATM it is propped on my dining table with Cat5 threatening to trip someone up, so I'm not really the flavour of the month in the house.

Regular file sharing ( looking at docs, pics, etc. ) is not a problem between the house PC and the CCTV box ( bidirectional ). The old CCTV box was controlled remotely using VNC with great success, and I was hoping to continue in the same vein. Unfortunately VNC cannot connect from the house box to the CCTV box, but will work the other way when initiated from the CCTV box, not very practical. UVNC will not work in either direction and will not loop back to itself, and Remote Desktop does not work either. Error messages are "server running as application" for UVNC and server unavailable ( words to that effect ) in VNC. Remote Desktop just times out. Firewalls on both machines have been off and on during testing with no apparent change. There is a Netcomm ADSL2 4 port modem that ties them together.

It should work, it did work, so I know it can work, but networks are not my strong suit so I am throwing it out for input here. I have been banging my head on this particular rock for about 10 hours and half a bottle of bourbon and it is 00:49 local time, so forgive me if I have failed to include the crucial nugget of information that will unravel this mess.Where should I start, or is there a no-fuss remote control software option for Windows 7 that I need instead?

View 5 Replies View Related

Unable To Ping Or Connect To Remote Desktop On Xp Pro Sp3

Jun 11, 2011

I have two computers side by side 192.168.1.7 and 192.168.1.8 both running xp pro sp3. On 8 I can RDC to the 7, but on 7 I cannot RDC to 8. I can see port 3389 listening on both using netstat -a. But 7 just can't RDC connect to 8. 7 cannot ping 8 either. I have the firewall turned off on 8, I had tried allowing RDC 3389 earlier with the firewall but that didn't work either.I don't have any extra firewalls running.Life will be like perfect, if I can just RDC to 8.Both are on the same wired belkin wireless router, 4' from itl.I tried taking the no ping no rdc computer to work and it didn't work there either.

View 19 Replies View Related

Can't Connect To Internet After Connecting To Remote Desktop

Aug 23, 2011

I successfully connected to my windows xp pc through the remote desktop connection client on my macbook and now I am unable to connect to the internet on the pc. All that it says is acquiring network address. I know that it is not an isp or router issue because all of the other computers on the network are able to connect just fine. I tried using system restore but it said something to the effect of windows can not restore to this point, no changes were made to your computer. This happened with multiple different restore points.

View 2 Replies View Related

Connect To Remote Desktop Through VPN From Public Network?

Sep 7, 2011

I have a user that is in a hotel with a Windows 7 laptop. He is connected to the hotel's public network and it is set as a public network in windows network and sharing center.Usually from home, which is a private network, he can log onto our VPN and then use Remote Desktop to control his work computer (which is Windows XP) here at the office; however, from this hotel, he can still connect to the VPN and access shared drives and all, but he cannot connect to any computer using remote desktop.I've tried everything, allowing remote connections for public in the firewall, even changed the network from public to private and he still cannot connect. Still, he can connect just fine from home.

View 1 Replies View Related

Cisco VPN :: ASA 5520 - Cannot Ping Or Remote Desktop Connect To Any Client

Apr 18, 2013

I have a need to Remote Desktop connect to company’s employees for support then they are abroad and using Cisco AnyConnect client.Cisco AnyConnect client connection works fine, clients can reach company’s inside network without problems, but I cannot make revers connection, I cannot Remote Desktop connect or ping VPN clients from companies inside network. I cannot ping clients from ASA too.I am using ASA 5520, Cisco Adaptive Security Appliance Software Version 8.4(3) Device Manager Version 6.4(7), and Cisco AnyConnect VPN Client 2.2.0133. Protocol Encryption- AnyConnect-Parent SSL – Tunnel DTLS-RC4 RC4 AES 128.

View 0 Replies View Related

Configure System To Connect To Remote Desktop Connection?

Nov 5, 2011

I want to know how to configure my system to connect to Remote Desktop Connection?

View 1 Replies View Related

Cisco Routers :: RV220W Connect To Web Interface

Jul 18, 2011

I have an Cisco RV220W and I can’t connect to web interface. The router is new, I receive the error in Mozilla: Cannot communicate securely with peer: no common encryption algorithm(s). I used also Internet Explorer, Chrome , I tried to disable SSL 3.0, TLS 1.0 but the problem persist. The PC obtained IP address from the router, I have ping on it ,also the SSID is up with open network I reset to factory default but the problem persist.

View 2 Replies View Related

Cisco Routers :: RV220W Connect To SSL VPN Using Windows 7

May 15, 2011

I'm relatively new to establishing VPN connections and I'm having one heck of a time getting everything configured.I'm setting up a RV220W at the office and trying to get VPN steup. I've have gotten Quick VPN connections working using the QuickVPN software. I've given up for now on IPsec VPN connactions and will come back to these later.What I'd like to get setup is the SSL VPN connections using the Win7 built in VPN client. Is this even possible? I initially tried to connect to the VPN via the SSL Web access but I cannot get the software/divers to install on any of the 3+ Win7 64 bit machines I tried.So can the SSL VPN on the RV220W be setup to connect to with the Win7 VPN Client using SSTP?

View 6 Replies View Related

Cisco Routers :: How To Connect RV220W On Wireless Network

Dec 24, 2012

I just got a cisco RV220W and I try to connect it on my wireless network as client, but it doesn't work.

View 1 Replies View Related

Cisco Routers :: RV220W Windows 7 Machine Won't Connect SSL VPN

Mar 9, 2012

I'm having problems connecting to the VPN. I can access the web portal, but cannot connect SSL VPN on my Mac 10.7, or a virtual windows 7 machines. I've read a lot of forum posts about the mac problem, but for some reason the Windows 7 machine won't connect SSL VPN on windows 7 x64, Chrome, FIreFox.
 
I tried downloading QuickVPN and set up a user account, but it just sits on the machine at the "Connecting" screen. My primary users will be running Windows 7 Professional x64.  

View 1 Replies View Related

Cisco Routers :: RV220W First Connect - Error Message In Browser

Feb 7, 2012

I just got myself a Cisco RV220W, connected my laptop to configure it. I receive an IP adress by DHCP (192.168.1.x) and can ping the router (192.168.1.1). However, when I try to connect to the router by the web interface, I receive this message in my browser (Chrome):
 
The webpage at https://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address. Error 113 (net::ERR_SSL_VERSION_OR_CIPHER_MISMATCH): Unknown error.
 
In FireFox: Secure Connection Failed An error occurred during a connection to 192.168.1.1. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
 
In IE9: I get no error message, the page never loads
 
Is it DoA or how to get connected to the web interface?

View 4 Replies View Related

TP-Link 150Mbps Wireless :: WR740N - Unable To Connect Remote Desktop And Do File / Printer Sharing

Feb 19, 2013

Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 120320 Rel.51047n
ISP : BSNL

I am facing some issue in LAN network.I have connected one desktop( win 7) and another desktop (win xp) to the TP link router. Both the computers got ip address and able to share the internet. But both the computers are not in the same network. That is they cant PING each other. hence they are not visible to each other.

View 4 Replies View Related

Cisco Routers :: RV220W Upgraded To Firmware 1.0.1.0 And Now PPPoE Doesn't Connect

Mar 30, 2011

When my RV220W used firmware 1.0.0.26 the PPPoE login to AT&T/Bellsouth DSL worked just fine. I upgraded to version 1.0.1.0 and now it won't connect. The PPPoE connection still works from my prior Linksys router so there wasn't a change on the ISP side. Has something changed in firmware 1.0.1.0 that requires a change to the PPPoE profile?
 
DSL Modem is a Motorola Netopia (model 2210-02) with firmware 7.7.3r10 operating in Bridged mode.

View 26 Replies View Related

Routers / Switches :: Connect The 3g Through The Router Desktop?

Jan 29, 2011

I want to get the internet on my desktop and use the wireless capabilities on the router with the laptop. What does the connection look like?

View 3 Replies View Related

Cisco VPN :: RV220W What To Enter For Remote WAN In VPN Wizard

Apr 8, 2011

I have just received my RV220W Small Business Router and I do not understand the manual/UI wrt VPN. In the past, I had a PPTP server running behind a NAT and I used Pass Through to get external clients (Macs) to connect to my local LAN.  But now I would like to use the Cisco Router's VPN capabilities to set up VPN and shut down the PPTP server in my LAN.I have a couple of fixed IP addresses that end up on this router, wit ISP-based 'technical' domain names (e.g. foo.static.isp.com) with reverse lookup, so using those, I should be able to connect to my RV220W from the outside.

View 0 Replies View Related

Routers / Switches :: Connect Remote Internet Through Ip?

Jan 23, 2011

i have a slow internet but my friend who live canada have high speed internet can use his internet . i do not want use his remote his computer but internet

View 5 Replies View Related

Routers / Switches :: Connect Two Remote LANs Together?

Jan 11, 2011

I have two locations in the same city and I want to connect them together so I can share files and printers. Each of the LANs has a router and is a simple workgroup. LAN A uses 192.168.1.1 255.255.255.0; LAN B is 192.168.2.1 255.255.255.0. What is the best way to connect these two networks together so I can share printers on both sides? Should I replace the network routers, they are older and definitely could use an upgrade

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved