Cisco Routers :: RV220W Upgraded To Firmware 1.0.1.0 And Now PPPoE Doesn't Connect
Mar 30, 2011
When my RV220W used firmware 1.0.0.26 the PPPoE login to AT&T/Bellsouth DSL worked just fine. I upgraded to version 1.0.1.0 and now it won't connect. The PPPoE connection still works from my prior Linksys router so there wasn't a change on the ISP side. Has something changed in firmware 1.0.1.0 that requires a change to the PPPoE profile?
DSL Modem is a Motorola Netopia (model 2210-02) with firmware 7.7.3r10 operating in Bridged mode.
View 26 Replies
ADVERTISEMENT
Jan 13, 2013
Recently I bought RV220W router and found out that PPPoE connection option or profile do no have service name field at all. Unfortunately, my ISP requires this to be able to connect. I had done some research before buying this router by going through online device manager demos on cisco website. RV220's interface is not available, but RV215 is and I checked out some of the common features between both routers. Surprisingly RV215's PPPoE connection settings has service name option.
I suppose, unless there is new firmware update (my current router is already running the latest available firmware), this option cannot be added in the interface. What I want to know is, is there any way to configure the router to use the service name in PPPoE option or in PPPoE profiles? I don't think RV220W can be accessed via terminal/SSH or maybe even terminal.
View 8 Replies
View Related
Jul 22, 2011
i have a RV220W and absolutely nothings functional on this stupid Router, no NAT , no Port Forwarding and I cant access my Network from Outside. Any firmware link for downloading. This address works, its handling special webrequest.
View 1 Replies
View Related
May 14, 2012
we are going to see a firmware update for the RV220W before it becomes obsolete?
View 36 Replies
View Related
Oct 20, 2011
Is there any timeframe on an update for the RV220W firmware? I have had to take mine out of production due to it freezing up/locking up under medium loads. DNS queries (dig) don't respond, pings outside of the network don't respond. Pings to the router DO respond. SSH responds but I have no login info to proceed further. The config (web) page doesn't respond. Interesting enough nntp (news groups) DO respond and download fine. Eventually the unit catches up and the config page shows back up. I wish there was a way to login via the ssh to see what is going on internally with processes. I will have to find time eventually. Right now my old Linksys 54G with DD-WRT is smoking the Cisco router's performance.
View 2 Replies
View Related
Dec 23, 2011
I noticed one awkward thing with the latest 1.0.3.5 firmware for the Cisco Small Business RV220W router, with previous firmwares there has always been reported 128mb of system memory (RAM) under the router dashboard. And several "teardowns" of this router has confirmed it to have 128mb of memory on the router board.
Does that mean the latest 1.0.3.5 has an odd visual bug, or has the RV220W gotten it's memory sliced in half with this firmware release?
View 4 Replies
View Related
Mar 13, 2012
I have tried to update firmware on a RV220W. Something stopped and now it won`t start. The power led blinks a few times and goes off, the LAN and WAN port wich is connected is lit. I have tried 10 seconds reset button but nothing happens.
View 1 Replies
View Related
Sep 25, 2011
I just bought an RV220w. My first act was updating th firmware to 1.0.2.4. Unfortunately I was not able to configure the router for vlan purpose 'cause the "Port VLAN" point was missing in the webinterface. I performed several factory reset but it didnt work for me - so I got back to firmware 1.0.1.0.
View 9 Replies
View Related
Sep 4, 2011
I've previously upgraded the firmware on our RV220W from 1.0.0.26 to 1.0.1.0 without any problems but all attempts to upgrade to the latest version 1.0.2.4 fails with the following message "Upgrade failed due to invalid/corrupted firmware". The router then automatically reboots with the current firmware.
We've already tried re-downloading and applying the update from several different machines using different operating systems and browsers without success. How to apply this firmware version successfully? We really need one of the VLAN fixes included in this latest version!
View 3 Replies
View Related
Apr 17, 2012
Every time I try to download a torrent/magnet the router will crash/reboot multiple time (using utorrent 3).
View 5 Replies
View Related
Apr 24, 2012
I have read every post here about port forwarding on the RV220W and none are clear. Here is my scenario.
I have 5 static IP Addresses. I want to use one of the IP addresses to setup remote access using Remote Desktop Connection from outside the office using port address translation. for example i would like to use RDC and a specific port such as 7000 and connect to an internal PC on port 3389. sounds simple. i do this all the time on Cisco ASA's, Netgear, D-link, etc. but for the life of me cannot do it on this cisco firewall. so the port address should look like 25.25.25.25:7000 and connect to 192.168.1.25:3389. i have tried everything based on the posts without luck.
View 1 Replies
View Related
Apr 13, 2012
I have a Cisco rv220w. I just tried updating the firmware. I used RV220W-Firmware-1.0.3.5.img. It rebooted, and now there is no DHCP and no access to anything. I tried the reset button for 10 seconds. That didn't do anything. The WAN and all the LAN lights light up. Power is on and solid. The light blinks alternating between the DMZ and the blank space to the right of wireless. How can I get this back to factory defaults?
View 5 Replies
View Related
Jan 10, 2013
We have RV220W at corporate office...intent is to have (5) groups of (3) users each connecting via VPN. Had assumed would be using QuickVPN and have set up users, etc and connections at current locations are quick, smooth, reliable. I have set up (2) locations (6 users so far). However, after 4th connection (no matter where or in what order) client hangs at "Verifying Network" and doesn't complete connection. So, I have unique usernames, etc but each of the (3) at a location are hitting the router with the same IP. Is this the problem? I'm sure the RV220W can handle 15 simultaneous connections, but can the router deal with (3) connections from the same external IP?
View 3 Replies
View Related
Jan 5, 2013
For some strange reason I'm getting the error "WAN IP should not be a network address" when I type in an IP address under the Static IP Settings section in the "IP Address" field. My client has a static IP from his ISP and I'm trying to set it up on the router. I've updated to the latest firmware 1.0.4.17 but still the same error.
I'm not copying and pasting the address, I'm typing it in. There is no extra spaces or anything. What is this glitch? I could save the router settings and reset it and try that but I'm doing this all remotely and would rather not have to make another trip to do this onsite.
View 6 Replies
View Related
Mar 10, 2013
I have a RV220W running 1.0.1.0. When trying to upgrade to 1.0.4.17 I receive an error: "Upgrade failed due to invalid/corrupted firmware".
I found this article: [URL]
I assume I have to do a factory reset then an upgrade in order to upgrade properly.
If I do a backup running 1.0.1.0, then upgrade to 1.0.4.17, then do a restore, would that put me back to 1.0.1.0? I'm trying to avoid configuring the router manually all over again.
View 1 Replies
View Related
Nov 5, 2012
I have a problem with my RV220W.
It reboots randomly every day and I got the following message in the log: [rv220w] System][FIREWALL] fwPPTPGenericRules.c: inet_aton failed I saw one internet that I can ask cisco for the Beta firmware 1.0.4.6 that fix the issues(Iactually use 1.0.4.17). Is it the solution? How can I obtain the beta firmware?
View 5 Replies
View Related
Nov 11, 2012
From an older manual it describes how to configure this. I installed the oldest firmware available for download and this feature is there. Was this just simply moved somewhere else in the newer firmware?
Configuring Port VLANs
You can associate VLANS on the Cisco RV220W to the LAN ports on the device.
By default, all 4 ports belong to VLAN1. You can edit these ports to associate them
[Code].....
View 2 Replies
View Related
May 26, 2011
I have a big problem with my cisco wap4410n .. I have upgrade the firmware of this AP to V2.0.3.3 for supporting multiple SSID after my upgradation is finished ..one time I can able to access the administration page But when I connected to another system the same AP I cannot able to connect through ethernet .The network connection in the system shows connected for one second and not connected for the next second its simultaneously repeating the same ..and still not connecting ..i changed my ip setting to default ie 192.168.1.xxxx and again to old config 192.169.3.xx any way the same instance is showing ..
In the WAP the power led, wireless led , are connected good but the Ethernet led is blinking off on stage.I have many times hard reset the WAP but off no use the same happens .i could not able connect to WAP.This may be the worse case ever seen in wap4410n …
View 1 Replies
View Related
Mar 17, 2011
Tell me whether my router is Ipv6 capable.Firmware Version: A1.01.09 , 2008-06-13Boot Version: 0.22.02,My Isp is not using this protocol yet, but I want to be ready.
View 2 Replies
View Related
Nov 1, 2012
I recently upgraded to Windows 8 with my XPS 16. I know the Intel R 5150 is not working right with Windows 8 just like everyone else I've seen post on various sites when they upgraded. My concern is.. when is there gonna be an updated driver!? You would think if Windows was gonna make it available to upgrade your OS to 8 that they would have all this straitened out. Now I have to get rid of 8 just so I can have WiFi!
View 8 Replies
View Related
Dec 27, 2011
I upgraded my router from version 1.2 to 1.35NA, through the Tools / Systems page on the router (uploaded the bin file). I am connected to the router via a wired connection.
During the upgrade, the message said I wouldn't be able to access the webpage until 75 secs. I watched it count down the seconds and then when it refreshed, I could not get to my routers page: 192.168.1.2
The DLink Router is connected as a pass through router to my FIOS router, so that I can use the wired ports and I use the DLink as my wireless router (fios router wireless strength was poor).
All the lights on the router are working as though everything is ok. I am still connected to the Internet, so it appears that the pass through of my wired ports is still working after the firmware upgrade, but wireless is not. Not surprising. I expect I may have to upload my settings (which I did save), but since I cannot get to the routers page, I feel a bit stuck.
two more bits of into. I also tried getting to 192.168.0.1, which might be the default? and I cannot get there either. My Fios router is on 192.168.1.1 (and as mentioned, the DLink should be at 192.168.1.2). Fios Router reports that the 192.168.1.2 port is inactive.
View 5 Replies
View Related
Jun 21, 2012
I am today playing with the settings in my DIR-655 NA B1 router when I notice that a firmware upgrade is available.I clicked the button and the router automatically downloaded the file named DIR655B1_FW207NAB09.bin. I flashed it and was saying that it needed to wait 180 seconds (3 minutes) to reprogram the router after which it came up with a 404 not found on the screen. I am not able to access my router, it is bricked and I can't even re-flash the firmware comes back with Incorrect hardware ID image, Please check. I notice that the 2.07NA firmware file on the website is named DIR655B1_FW207NAB05.bin. What gives this is the first time a firmware upgrade has bricked anything I own?
View 14 Replies
View Related
May 7, 2012
I can't win. After dealing with the internet dropping once every two weeks, I decided that upgrading the firmware might work. Turns it all it did was exacerbate the problem and now my internet drops every few minutes. I've been plugged into my modem for a good 20 minutes at this point with no drops. Has my router just shit the bed or can this be fixed?
View 8 Replies
View Related
Mar 17, 2013
The RV180W would not connect to an AT&T DSL connection using PPPoE (modem in bridge mode), or behind the DSL Modem/router with the DSL modem/router providing a dynamic IP to the RV180W or a cable modem (TimeWarner Roadrunner dynamic IP). I upgraded the firmware yesterday and now the RV180W will connect to a dynamic WAN IP, but it still will not connect using PPPoE.
I have also noticed the admin interface is only accessible about 75% of the time. When going to 192.168.1.1 the login prompts either don't come up or if they do, after logging in, the screen never fully loads after that. I have to reboot the router to get it to work.
Also, the router has not yet pulled DNS from either the DSL or the cable modem. I had to manually enter those addresses.
View 1 Replies
View Related
Feb 26, 2012
I own a Linksys BEFSR41 v 3.1. I've been attempting to set up a home network with three computers; my main desktop running Windows 7 Pro x64, a netbook running the same OS and a box running Windows Home Server 2011 x64. The firmware listed for my router was initially 1.05.03.
My router has the issue with resetting its administrative password to the factory default and I've been unable to set up remote access to my LAN and home server. I decided to try updating the router's firmware, but none of the versions listed fit the one I have. The label on my router says v 3.1, but Cisco's site only has a 1.0, 2.0, 3.0, then skips to 4.1, 4.2, etc. The instructions on the site warn not to use a version for a different model, but are vague as to exactly what that refers to, as the model # and the version # aren't clearly delineated.
Anyway, I tried using the latest firmware and received the, "File Pattern," error. Although it didn't seem like anything had changed, I reset the router just to be safe, then tried the v 3.0 firmware update, thinking that the software was intended for all revisions of v3.0. This time it reported updating without a problem, so I reset the router again and went back to the admin page in my browser to check the firmware version listed. To my annoyance, the firmware is now listed as 1.05.00 - i.e. an earlier version than what was shipped on the router.
This means that not only is the issue of the password resetting not fixed, but any other fixes included in the original firmware are now wiped out as well and, needless to say, I still can't set up remote access properly.
How do I restore the firmware version? Neither a reset nor a, "Restore to Factory Defaults," does this. How do I find an actual update for the router? I can't find any mention of a v 3.1 on Cisco's site, let alone support information specific to this model and version.
View 1 Replies
View Related
Aug 7, 2011
I was having problems with the speed being between 30-58 kpbs when going through the WRT160N router, whether its hooked up wired or wireless, the speed with both was extremely slow and wouldnt fully open pager or would take dsl day slow. I hooked up straight to modem and I got 100+ kpbs so I figured its not my ISP, so I read that upgrading my firmware might make it faster, so I upgraded and hit and held the reset button for 30 secs like it recommended but now the 192.168.1.1 wont open, I get a message saying it cant open this page
View 4 Replies
View Related
Jan 5, 2012
I have the Linksys BEFSR V2 router and at least once a day some or one of the ports become inactive and have to unplug the router and plug it back in to reset. I have ungraded to the latest firmware but this is still happening on a daily basis.
View 3 Replies
View Related
Jan 2, 2013
I just setup my new Cisco EA4500 and upgraded to latest firmware and signed up for my account.Local access to the router works fine and I see the Smart Wi-Fi admin/config interface However when I try to go to the following site: url...To access Linksys Smart Wi-Fi Tools, your router <em>requires</em> the <a href="url...Series Linksys Smart Wi-Fi Firmware</a> and you will need to associate your router with your Linksys Smart Wi-Fi account.On a computer or device connected to your router, open url... and follow the instructions. This requires that you enter the router password so have that ready.
However I see no way to perform the association step - my account exists and my router is configured.I am doing all this behind this router wi-fi network not remotely.
View 4 Replies
View Related
Jun 6, 2012
I bought E900, accessed setup thru 192.168.1.1, upgraded its firmware.. then changed router's IP, it reboots, then went blank, I cannot access the setup page anymore?
View 9 Replies
View Related
Aug 14, 2011
I have upgraded the firmware on my Linksys BEFSR41 V4.3 router. On this router i used Statis IP (so DHCP enabled). This worked fine on my network, until this upgrade. Now when i try to ad another static IP , or when i want to change something in the Routing-tab, i get this message ' Wrong Gateway Input! It should be the same subnet with WAN IP'. Strange because i haven't changed anything in the settings.I already did a complete reset on the router, still the same problem.
View 7 Replies
View Related
Jul 18, 2011
I have an Cisco RV220W and I can’t connect to web interface. The router is new, I receive the error in Mozilla: Cannot communicate securely with peer: no common encryption algorithm(s). I used also Internet Explorer, Chrome , I tried to disable SSL 3.0, TLS 1.0 but the problem persist. The PC obtained IP address from the router, I have ping on it ,also the SSID is up with open network I reset to factory default but the problem persist.
View 2 Replies
View Related
May 15, 2011
I'm relatively new to establishing VPN connections and I'm having one heck of a time getting everything configured.I'm setting up a RV220W at the office and trying to get VPN steup. I've have gotten Quick VPN connections working using the QuickVPN software. I've given up for now on IPsec VPN connactions and will come back to these later.What I'd like to get setup is the SSL VPN connections using the Win7 built in VPN client. Is this even possible? I initially tried to connect to the VPN via the SSL Web access but I cannot get the software/divers to install on any of the 3+ Win7 64 bit machines I tried.So can the SSL VPN on the RV220W be setup to connect to with the Win7 VPN Client using SSTP?
View 6 Replies
View Related
Dec 24, 2012
I just got a cisco RV220W and I try to connect it on my wireless network as client, but it doesn't work.
View 1 Replies
View Related
