Cisco Routers :: RVS4000 - Multiple Internet Connections / Routers Sharing Printers?
Sep 11, 2011
I have 2 internet connections in my office one via Verizon Fios and another one via the local cable company. On the fios connection I have an RV042 VPN router and on the Cable company connection I have an rvs4000 router, I would like to know if there is a way I can connect the 2 so I can share a printer I have on one of the 2 networks from the other network without using the VPN feature, like via an ethernet cable connected between the 2 and some kind of static route maybe?
View 6 Replies
ADVERTISEMENT
Jul 24, 2012
We have a newly-purchased RVS4000 v2 with firmware v2.0.2.7. Its intended role is as a gateway between our local network of wired workstations and a Cisco 2800 series Integrated Services Router, which is at the receiving end of our T1 line. It is configured with static IPs on both the LAN and the WAN side. It does NOT serve DHCP for the LAN. Ever since I installed it, I have had repeated complaints from users of Vista and Win7 workstations that they lose internet connectivity about every 20 - 30 minutes or so. The only solution is to unplug the workstation's CAT5 cable, count to 30, and plug it back in. Then everything's hunky dory for another 20 - 30 minutes. Meanwhile, all our Windows XP and Linux workstations enjoy uninterrupted internet access. The router/gateway we replaced (a DLink DIR-130) never had this problem.
View 4 Replies
View Related
Mar 11, 2013
If there are any small business routers that offer one-to-one NAT? I have several public IP addresses assigned to me by CenturyLink. I have two servers that provide email and web hosting for two different domains. I want to put the client machines on one VLAN (VLAN Z) and assign it a public IP address (to keep server traffic separate). I want to put each server on its own VLAN (VLANs X & Y) and assign each server its own public IP address. I need the router to be able to provide a firewall and port forwarding for each VLAN. I also need to be able to route traffic between VLANs so the clients on VLAN Z can access their email and the websites on VLANs X and Y. I also need to be able to route DNS traffic between VLANs so each server can provide name resolution for their respective domains.
So, is this possible with a small business router or do I need to look at something different? I'm fairly certain this configuration is not possible with my current Cisco RVS4000. What it boils down to is I need a router that is capable of having multiple public IP addresses on the same interface and to forward those public addresses to private VLAN subnets. This would be one-to-one NAT if I understand it correctly..
View 5 Replies
View Related
Aug 22, 2012
The client has a Cisco RVS4000. There are 3 Internet devices need to be accessed from the outside and will use one public IP for one device. I don't see any options to setup on Cisco RVS4000 to do 3 NATs. If Cisco RVS4000 doesn't work in this situation, which router will do?
View 1 Replies
View Related
Aug 29, 2011
I recently purchased a RVS 4000 (firmware V2.0.0.3) and am having some issues creating a second (third...fourth?) IPSec VPN Tunnel. The first one is up and running just fine. On the VPN Summary screen it says [1 Tunnels Used 4 Tunnels Available].
When I go to configure the second tunnel, I select --New-- from the "Select Tunnel Entry" drop down and proceed to fill in all the connection information. When I click Save, it seems to be processing and after a few seconds just returns me to the same screen, with none of the information I just input and no connection created. No errors given.
I have another RVS4000 to connect at a different location which will require a similar setup, but don't want to do anything with it until I have the one mentioned above working fully.
View 1 Replies
View Related
Mar 9, 2013
I am trying to configure my RVS4000 to create my church's small network. I want to connect my internet DSL router on the WAN port and also segment my network with VLANs on the 4 LAN ports. I have port 4 connected to a wireless access point which is in VLAN1 for an open wireless network for any church member to access the internet through. I have a church server, printer and second access point on ports 1-3 in VLAN 34. All ports are untagged. I want the devices on VLAN34 which need confidentiality to be secure from the devices connecting to the internet from VLAN1 for open access but both VLANs need access to the internet..
My open wireless AP in VLAN1 has access to the internet on the WAN port.
None of my devices in VLAN34 have access to the internet. I have tried using inter-VLAN routing but that made operation worse so I disabled it.
View 1 Replies
View Related
Aug 22, 2011
I am able to connect to the RVS4000 remotely using QuickVPN, and can stay connected, however, once connected I cannot use the internet or see any of the remote computers via the network.
View 3 Replies
View Related
Apr 8, 2012
Just recently purchased an RVS4000 to take the place of an old NetGear FVS336, which supported multiple NAT translations. It appears that the RVS4000 does not support this, any other models in the small business line support this? I only need this for a backup Internet connection?
View 4 Replies
View Related
Apr 14, 2012
Would there be some reason why I cannot change the Access Restriction to Allow? I also can't add anything into the Website Blocking by URL Address or the Website Blocking by Keyword. I can't type anything in the fields. I've tried rebooting, other browsers and even other computers but nothing seems to work.
View 14 Replies
View Related
Oct 17, 2012
I picked up an RVS4000 V2 and configured a rule to forward a Magic Packet to an internal system to wake it from a sleep state. Everything was working fine until I update the firmware to v2.0.3.2. I know it's not the the computer as I can wake it from Sleep internally without any problems. One thing I noticed is that the static IP for the computer in Sleep state gets lost in the ARP/RARP Table though the NIC is configured to respond to ARP requests in Sleep.
Has anything changed in v2.0.3.2 that requires a different configuration to get Wake on Lan working externally?
My Setup is
Computer
P8Z68 Deluxe/Gen3 onboard Intel 82579V NIC
Wake on Magic Packet: ON
Respond to ARP/NS requests without waking system: ON
RVS4000 V2 (v2.0.3.2)
Mode: Gateway
[code]....
View 1 Replies
View Related
Jul 29, 2012
I recently bought an RVS4000, and unfortunately forget the "if it ain't broke, don't fix it" rule, and flashed it to the latest firmware (2.0.2.7). Subsequent to doing that, it has been inconveniently dropping the connection to my ISP and completely locking itself up to a point where a manual reboot is required, usually about 4 hours after any outgoing activity (which usually means 11pm!).
Goggling my way round seems to suggest that this could be a firmware problem. The accepted wisdom is that I need to use the RVS4000 Upgrade Utility to get back to a lower version, so I have downloaded and installed V1.3 from the RVS4000 support area. However, though I think I followed the instructions (including trying setting the host PC to a fixed IP address, which was not supposed to be necessary), but I am consistently getting a "Broadcast Error" message, which I am guessing means that the utility and the RVS4000 aren't talking.
View 3 Replies
View Related
Nov 27, 2012
I have recently purchased a RVS4000 router and am experiencing major downtime.Almost everyday the RVS4000 router losing internet connectivity. I noticed that when this happens I cannot login into the router from my pc which is connected to the RVS4000 network.The only way to restore connectivity is to restart the RVS4000 by disconnecting power and powering back up.The router's WAN is connected to my Cable modem.The RVS400 has two PC connected to it. (port 3 & 4) I have a Cisco 8-port switch connect to the RVS4000 with 3 additional PCs/devices on it.
View 6 Replies
View Related
May 6, 2011
My current setup is like this:One adsl modem/wireless router with working internet.One adsl modem/wireless router that cannot be configured (cheapo router with hardcoded settings from the ISP), without working internet.I want to use a computer to bridge the internet connectivity from the first router to the second by connecting wirelessly to the first, and wired to the second, so that the second router effectively acts as a wireless signal booster, and any PCs connected to it can also access the internet.I have tried bridging the wireless and wired connections on the PC but it does not appear to work.I don't think ICS is quite what I want, as it seems to be designed for use on a single network. OS on the bridging PC is Win XP.
View 1 Replies
View Related
Feb 16, 2011
One computer is an iMac running Snow leopard and the other is running Win 7. I wish to switch either computer to any of the two printers.
View 1 Replies
View Related
Dec 25, 2012
I just upgraded from RV-042 to RV-042G on 24.Dec.
My previous connections are : (1st) 100Mbps ISP connection, (2nd) 200Mbps ISP connection (fibre to home)
Before upgrade, my RV-042 worked very stable.
After using Migration Tools by exporting RV-042 current config and converted to V3 configuration, the converted configuration was imported to RV-042G.
In beginning, RV-042G woks fine after imported converted configuration file. Unfortunately, after around 1 hour of use, my iPad (through an Apple Airport Extreme Station) and wired PC could not browse internet.
But, port-forward to 3 IP-cam still be able to access by my iPhon4 through Carrier 3G connections.
After a reboot of RV-042G, internet connection comes back. But, after an hour of use, the same issue happened again.
RV-042G makes me fluctuated. I will fallback to RV-042 from now on and wait for any further firmware improvement from Cisco/Linksys.
My previous RV-042 and current RV-042G config:-
* WAN1 : 100Mbps ISP connection
* WAN2 : 1Gbips ISP connection ( 200Mbps max throughput)
* LAN1 : connected to Apple Airport Extreme
* LAN2 : connected to Linksys 16-port FastEthernet switch
* LAN3 : idle
* LAN4 : connected to an Intel i7 PC
* Dual WAN link mode with bandwidth management, all internet connection from PC will stick on WAN2
View 2 Replies
View Related
Nov 3, 2012
When I plug in my HP Ethernet Printers via the four LAN ports they are not seen
View 1 Replies
View Related
Nov 27, 2011
We have RV 042 deployed for internet access/firewall purposes. Due to growing number for Wireless devices and also to separate WLAN traffic from wired devices, we have created a separate VLAN/IP Subnet for the wifi devices. We are having trouble accessing the internet from the WiFi VLAN/IP Subnet. Cisco 3750 is layer 2 and layer 3 device. We have VLAN 1 (10.10.10.0/255.255.255.0), all wired devices and RV 042 are part of VLAN 1. Connectivity to internet from VLAN 1 is good. VLAN 2 (192.168.1.0 / 255.255.255.0) was created for wifi devices, 3750 does the inter-vlan routing, I have enabled the multiple subnet feature on the RV 042 and added 192.168.1.2 / 24 to the subnet list, we still have issues accessing internet from vlan 2 devices.
As a workaround, I shutdown vlan 2 and added 192.168.1.0/24 as secondary address to the VLAN 1 interface on 3750 and i was able to access internet from 192.168.1.0/24 network with wifi devices also on vlan 1, we want wifi devices to be on separate vlan / ip subnet. Looking at the documentation for RV series routers, it talks about supporting multiple subnets access to internet by enabling multiple subnet feature but it doesn't seem to work.Are there restrictions on having multiple vlans?
View 4 Replies
View Related
Oct 24, 2011
In my office we have concrete walls and very limited wiring. The way it is set up is we have a Verizon DSL Modem that comes in then I have a router with it that splits the signal to 4 other routers that each split the signal 2 to 3 more times. I have to use routers so that it assigns IP addresses.I bought a new D-Line N300 Wireless router with USB imput. I want to attach my Home Media Network Hard Drive Cloud edition to the 1st router (attached to the modem) and then share the data off that hard drive with everyone connected to the sub routers.
View 4 Replies
View Related
Sep 2, 2011
Client who owns a school (small pre-school) has 3 desktops that she uses in the office and wants to be able to print to 3 different printers. So each desktop has the ability to print to each of the 3 printers. Her reason for 3 different printers are if one is out of ink I can print to another, or if one just isnt working I can print to another. Would I use a USB switch(assuming they connect via USB)
View 7 Replies
View Related
Jan 24, 2012
I am having trouble with my network, specifically printer and file sharing. I have 3 computers, (2 wired, 1 wireless) The network hasn't worked for quite a while. I just hooked up a new (wired) computer and it won't work on the network either. With the wireless computer, if I click on "view workgroup computers" I can see all the computers but cannot access them. With the 2 wired computers, I always get the message, "MSHOME is not accessible," etc. Funny thing is, the network used to work. I don't know what happened to it. I just formatted this new wired computer and loaded XP on it, used the network setup wizard, but keep getting the "not accessible" message. However, last month, I was working on my mom's computer and I put it on my network (hardwired). I had just formatted it and put XP on it and with that computer, I was able to access the laptop computer through the network.I have tried several times to create a new network by using the network setup wizard but it keeps saying that MSHOME is unavailable.I am using XP service pack 3 on all computers, Zone Alarm on 2 of the computers (the router and the new computer), and Windows Firewall on the other wired computer. I can access the Internet with all 3 computers.
View 18 Replies
View Related
Jul 19, 2011
Before I moved home I had one netgear router supplied by virgin media. On my home network I had my pc sharing it's printer and also some shared folders I.e. Music folder, my documents etc. Now I've moved I have had a new netgear box supplied by virgin media (which I call virgin media 7) which because of the shape of the building doesn't reach my bed room. To fix this I have had to connect my old netgear box (which I call virgin media 8) to the new one via 10m of CAT5e but now I can't access my shared printer or shared folders on my win xp pc which is connected to virgin media 7 via wireless if my vista laptop is connected to virgin media 8. I have tried looking in the setting for the option that makes it just act as an wireless extention to vm7 but they have removed the menu from the settings.
View 5 Replies
View Related
Apr 20, 2013
Ive set up a rvs4000 with two vlans, one as a bussiness network and the other as a guest network. Everything works fine and the networks can not see each other. I would like to add wifi and I would like to do so with keeping both networks separate. I have a used 1130AG access point and was wondering if I could use this single AP for both networks. If so, how would I go about doing so? Is there a better suited AP for my needs?
View 4 Replies
View Related
May 16, 2012
I have an RVS4000 running V2.0.2.7 firmware that gives me an "Invalid Character(s) Found" error message when I try to edit an existing ACL.
I'm trying to deploy 57 of these routers and would like to be able to use a pre-built config dropped onto each router.
I initially planned on editing the exported config with a find&replace for my local LAN addresses. Since that didn't work the next reasonable solution would be to edit the ACL list (much more tedious, but still better than hand-entering every ACL on all 57 devices).
when this bug will be addressed? Alternatively, if there is an offline configuration editing tool I would be one happy camper to have it!
View 2 Replies
View Related
Jun 3, 2013
I have an RVS4000, not installed. How can I tell from the unit or the packaging that it is a v1 or a v2, without installing and switching it on (which I don't want to do now) ? Are v1 branded Linsys and v2 Cisco ? Can you tell from the date on the package (mine says copyright 2011) ?
View 1 Replies
View Related
Sep 4, 2011
I don't know if my vendor mislead me, but I need to do this: There is a public subnet in my office, not a 192.168.x.x, but a real Public IP.The reason is that we do VOIP and those are only servers. I installed a RVS 4000 in that location, and assigned a PUBLIC Ip to BOTH the WAN and LAN, since when I connect from outside, using either QickVPN or another identical router, I need to be assigned one of the PUBLIC Ip's on the remote LAN. That is the whole idea of the project, to locate servers remotely and make them use our set of PUBLIC IP's. Well, so far I cannot connect either with the Quick VPN client, or using the VPN Wizard. It goes and creates the tunnel, without error, but when I click test, it fails.
View 2 Replies
View Related
Mar 15, 2012
We have backup and other traffic over our vpn which is affecting our ip phone service between two sites. Our consultant suggested implementing QOS over the VPN to give the phone traffic priority. Is this possible with the rvs4000. Is there any good source saying how to do it. Is the setup of the QOS on this router similar to another router where this has been discussed.
View 1 Replies
View Related
Mar 19, 2012
I have problem with bandwidth management on my RVS4000.
That is the way how i done it:
All traffic (TCP & UDP on all ports)
IP range 192.168.0.2 - 192.168.0.2 (My IP adress)
Guaranted download speed 1kbps
Maximum download speed 5000kbps
after saving setting and rebooting router I have maximum download speed on my PC 12000kbps, Why QOS doesnt work ?
View 3 Replies
View Related
Nov 11, 2012
I am getting ready to setup an RVS4000 so we can use the VPN functionality of it, but I am not quite sure of the correct way to integrate it into our network though. I do not need site to site, just the client portion of it for a few salesmen/off site people to use. I have never used or setup a VPN before, so I'm learning everything as I go along.
We are in the middle of switching our ISP and I am waiting to set this up until the new service is live so I can test it prior to moving the rest of the company to the new ISP.
We are switching to Comcast, and will have 5 static IP's available to use. Currently, the firewall does all our NAT and is the forward facing device on our network. I would like to leave the firewall in place (although I am setting up a new firewall for the new internet connection) and have th RVS 4000 sit behind it and receive VPN traffic from a WAN to LAN rule We currently have a 192.168.100.0/24 network.
Do I need to setup another /24 network for the VPN to function behind (and still have access to the 100.X network), or is there a way to allow everyone who connects to receive a 100.X ip address from our DHCP server. I'm not sure how to set everything up with the WAN/LAN connections on the RVS4000 to acheive this.
We are running a domain on a 2008R2 server. The clients will be using laptops that are already part of the domain, if that will make a difference.
View 2 Replies
View Related
Jun 15, 2011
I'm trying to setup a VPN tunnel between a Cisco RVS4000 on our side and a Cisco ASA5520, to connect a machine on our local network to a test server on the target side.
We have all the settings setup correctly and the tunnel is up and running, however, our local machine can't connect/ping to their server. I've tried a trace route both from the machine and from the RVS4000 itself, and they both get stuck after getting past 192.168.1.1. Is there any routing or NAT-ing that I need to do on our router? Or is there a problem somewhere else?
View 7 Replies
View Related
Aug 8, 2009
I'm having an issue with a Linksys RVS4000 which doesn't appear to be behaving as I think it should.I need to forward a port (Single Port Forwarding) through to an internal NAT host. However, I only want that host/port to be accessible from one host on the internet, for security reasons.
I have created the port forwarding entry and this works fine. I then created two rules in IP Based ACL - one to block all access to that port from the WAN interface and one to allow access from a single host.
However, it appears that when a port forwarding entry is added, it will completely bypass the ACL and allow all traffic for that port/host by default.Is this the correct behaviour?
Firmware version is v1.2.11
View 12 Replies
View Related
Sep 13, 2011
I'm currently dealing with a weird problem on a Cisco RVS4000. I'm trying to connect to a IPSEC VPN Gateway (NETASQ) located on the LAN side of the RVS4000. I'm using Green bow vpn client on the WAN side of the RVS4000. Basically I'm trying to get through the RVS.My VPN config is OK because i tested it on the LAN side of the RVS.
The RVS is configured like this: NO VPN configured.
Block WAN Request :OFF
FIREWALL,IPS,DDOS are OFF
NAT forwarding on for UDP 500 and 4500 directed from the wan to the ip of the VPN gateway. Seems right because iv managed to do this with other routers (different brands) on another site.I've wire sharked my vpn client and i keep getting ICMP destination unreachable (PORT UNREACHABLE) after my ISAKMP launching packet.Can the RVS nat these ports ?
View 3 Replies
View Related
Jan 11, 2012
I've been trying to disect this problem for a few months to no avail. The router allows me to connect to outside FTP only when IPS is enabled. The moment I disable the IPS functoin, the connection hangs and does not connect to a server. Reason I'd like to keep IPS disabled it is because it's eating up half of bandwith when enabled.RVS4000
View 2 Replies
View Related
Jun 7, 2011
I have a two broadband (Indian standards) connections that I want to use together. One is a 1mbps and the other is a 512kbps. The config that I have is below.
OS: Windows 7
Laptop: Acer Aspire
Router 1: Buffalo AirStation WHR-G54S
Router 2: ZyXEL P-600
I read about it on a few boards but I couldn't find any proper info on that.
View 2 Replies
View Related
