Cisco Routers :: WRVS4400N Connection Only Works For Few Seconds

May 4, 2012

I am having some difficulties using RDP on the LAN of the router. I previously had a Linksys E4200 router, and I was able to RDP from my Win7 computer (192.168.1.139) to my Win2k3 server on the LAN (192.168.1.251) with no issues. However, when I replace the E4200 with the WRVS4400N, the connection will only work for a few seconds.

It is not exclusive to RDP connections on the LAN either... I get a similar error when attempting to connect to computers off site. I could see MTU's being an issue if it was over a VPN connection, but there is no VPN involved in this case.

View 1 Replies


ADVERTISEMENT

Cisco Routers :: WRVS4400N - Setup VPN Connection?

Apr 6, 2013

How to setup VPN connection,
 
Head office : fortigate 200b firewall - SSL, IPsec
 
Branch office: WRVS4400N Wireless-N Gigabit Security Router with VPN
 
Both side have the public IP.

View 1 Replies View Related

Cisco Routers :: WRVS4400N VPN Needs Manual Connection?

May 8, 2013

WRVS4400N needs to be manually connected when the power is recycled after power failure. Is there a setting to connect an IPSEC VPN automatically, instead of manually going in to connect the VPN

View 3 Replies View Related

Cisco Routers :: WRVS4400N Wireless Network Connection

Jun 2, 2013

I need trouble-shooting wireless network connectivity issues that arose recently:We use a Comcast modem and two WRVS4400N's as wireless routers/wireless access points.We recently got our comcast service upgraded to 100/20 and also got rid of our static ip address.  As a result (I think there must be a sort of causal relationship here, but I'm not sure what it is) we can no longer connect to the internet using our wireless networks.  We can connect to the wireless network, but have "No Internet Access."

View 4 Replies View Related

Cisco Routers :: WRVS4400N L2TP Dynamic Connection

Nov 1, 2011

We just purchased the WRVS4400N router with high hopes. For some  reason, our ISP provides a connection through L2TP Dynamic for a static  IP. I repeat, L2TP Dynamic. Is there anyway to properly configure the router to use such a connection method. I only see L2TP Static, which seems to be the standard method for many routers.

View 1 Replies View Related

Cisco Routers :: WRVS4400N Wireless Connection Drop Suddenly?

Apr 16, 2012

I see a lots of problem associated with wirless connectivity with WRVS4400N, with following config
 
Firmware version - Firmware Version: V1.1.13
Wireless connectivity - G/N Mixed
Auth - WPA2 AES
Everything else default and AUTO,
 
Problem:The end devices suddenly drop connection. Wired connection works just fine. The DROPPED device can not be reconnected. On MAC I get AUTH time out. I see the SSID being broadcasted from my HTC wireless analyster so radio may not be the problem. I changed to set the speed to G only or N only but not avail. ONLY way to recover from this is rebooting the router. 

View 2 Replies View Related

Cisco Routers :: WRVS4400N Slowing Down 100Mb Internet Connection

Jun 4, 2012

I have a Cisco WRVS4400N on the latest firmware and I have just had my Virgin internet connection upgraded to the 100Mb. Once i thought it was upgraded i checked with a broadband speed test and it came back as 15Mb download and 5Mb upload. Before i rang Virgin i thought i'd check with a direct connection from my pc straight to the modem. Ran the speed test and it came back as 100Mb download and 5Mb upload. I thought the best thing to do is restore my settings back to factory and its still the same.

View 7 Replies View Related

Cisco Routers :: VPN Connection To WRVS4400N Using A Samsung Galaxy Tablet

Apr 1, 2012

I have a Samsung Galaxy 10.1 tablet and have bee trying to connect to my WRVS4400N router with VPN through the "on board" software as well as with the Any Connect software from Cisco.  I have no issues at the moment using Quick VPN from my laptop.
 
When using the Any Connect software I receive the following messages:
 
Security warning: untrusted certificate
AnyConnect cannot verify the identity of <IP address>.  Would you like to continue anyway?
- Certificate does not match the server name.
- Certificate is from an untrusted source.
- Certificate is not identified for this purpose
[Accept]  [Details]  [Cancel]
 
If I select accept, the following error is received:
 
"Error:  Connection attempt has failed due to server communication errors.  Please retry the connection".
 
I have tried setting up the on board VPN with the Samsug Galaxy but every attempt has resulted in a time-out of the connection.

View 2 Replies View Related

Cisco Routers :: WRVS4400N Intermittently Drops Internet Connection?

Oct 18, 2011

For eight months we have not had any problems with our new WRVS4400N (V2.0.2.1) connected to a Verizon/Westell 6500 to provide DSL internet for our network with DHCP on our server...  No changes have been made to the router or modem since initial setup; but, then it started -- Our internet connection would drop intermittently.  Sometimes every 5 or 10 minutes - sometimes every hour.  Verizon has tested the lines which came up ok, then they sent a tech who changed the wire pair coming into the building for the DSL line and retested the lines which again came up ok, then they provided us with a new modem (now a Verizon/Westell 7500).  After all that, the DSL still connects then disconnects intermittently.  I am now wondering if the issue lies with the WRVS4400N.

View 2 Replies View Related

Cisco Routers :: 2 Seconds Delay On SRP527w FXS Port?

Nov 6, 2011

I have a wierd "2 second delay" issue with audio generation on a SRP527w.When in a call, with myself on both ends of the setup DECTphone - FXSport on SRP527w - VOIPprovider <> PSTN/GSM - Mobile I can hear my voice on the mobile immediately, as expected. However, the same words i speak (having both the DECT and the Mobile at my ears), are heared on the DECT with 2 seconds delay. Trust me when I say that this is the base for a poor rated telephone call and misunderstandings therein.
 
This issue is the same when calling to other mobiles and even land-lines, both in being called and being the calling party... Every time the voice from the other side is heard "delayed" on the DECT. Testing the DECT on a normal non-voip connection results in a normal conversation, as far as this is possible with me talking to myself I do have a separate CBR pvc for the voice on the SRP and to investigate the issue I've put the SIP user on a soft client, using a UBR pvc on the same SRP, both pvc's do use the same provider but diverend gateways. And with the UBR + softphone i do not have this "2sec delay" issue.
 
So, ruffly said this seems to locate the issue in the SIP>FXS DSP, with specific only the digital>analog decoding/generation (not with the analog>digital encoding, as i hear myself normally on the mobile, with no/normal msecs delay).

View 4 Replies View Related

Router Connection Interrupting Every 15 Seconds?

May 21, 2012

However, only some of them remain, so I will describe them again here.My router (Belkin) was working fine for over a year. Everything seemed to be working just fine, then this happened to me once but the problem disappeared itself. However, day after that, it happened again after I restarted my notebook.Basically, my connection drops out for few seconds every few tens of seconds. This means that I get regular lags several times within every single minute. Here is screen from "ping [routerIP] -t".imgur: the simple image sharerQuite frustrating, huh... This is only wireless-related issue, connecting to the router directly using RJ-45 solves the problem.

I have tried restarting and reconfiguring the router, including changing SSID, Channels, turning off security, restarting and restoring factory defaults.My notebook seems to be the only PC having this issue (however, I have not been able to test that out yet, but the problems seemed to come exactly after a PC restart, very unlikely a coincidence). I have tried removing windows network profiles, restarting several times, setting a static IP and removing browser proxy settingsI have been trying to google the solution, but all I found were already known (and not working) solutions, also, everyone seems to be having a less frequent drops (few times in a day, or an hour, I would love that xD).

View 9 Replies View Related

Internet Connection Goes Out Every Minute Or So For About 1-2 Seconds

Dec 26, 2012

The problem I am having is my wired internet connection is going out every minute or so and stays out for about 1-2 seconds at a time sometimes it stays out for around 3-4 mins usually twice a day. This problem has been occurring everyday for the past 2 or so years some days it is worse. I have power cycled the modem and router many times, replaced the router, replaced the modem bypassed the router and it always does the same thing. I have gotten cox cable to come out many times, once was to replace the modem, and it conveniently does not have problems when they come then i look stupid. I have showed them the screen shots of the outages from pinging multiple points on the network as shown in the attached screen shot, as you can see in window labeled 1 is a continuous ping of google.com, window 2 is the first hop on the tracert as shown at the bottom of the picture, window 3 is my modem, and window 4 is my router.

As you can see I never lose connection to my router or modem and it is the same when i run tests from other devices. Every time I call them or show them this picture the only response I get is there are no reported outages and to try to reset my modem and router or they can send a tech. When the tech comes there seems to be no problems and I show him the screen shots and he writes it off as peak hour malfunctions even though it does it at non-peak hours as well. Then when he leaves It starts to freak out again I have gone through this scenario at least 3 or 4 times and at this point am getting very frustrated. Even though it is not very noticeable with normal web browsing in gaming and streaming it is a nightmare. I would have already switched service providers if there were any other that service my area.

View 4 Replies View Related

Laptop Drops Internet Connection After 10 Seconds

Apr 27, 2011

New laptop, connected to my home network which is very stable and has no history of connection issues. After about 10 seconds the laptop drops the connection. Sometimes it'll come back for a while sometimes not, haven't observed any pattern in this yet, All I've done since starting the computer for the first time is installed all the junk that comes with it (Nero stuff mostly) and installed all windows updates (there were over 60 of them) and AVG Free edition. Before doing all that the connection was still not right but it did hold for a lot longer than 10 seconds. It held for over an hour downloading programs like Itunes, AVG and Firefox, Going to control panel > network sharing centre when the connection is down I see the yellow exclamation mark between my computer and my network. Troubleshooting this resets the network adapter, gives me the error 'The default gateway is not available' and says that it is fixed. The connection then works again for about 10 seconds and drops once more.

View 11 Replies View Related

Modem Randomly Loses Connection For A Few Seconds?

Jun 19, 2012

Basically my modem will randomly disconnect (all the lights shut down expect for the power one) for 2-3 seconds max and it happens just at a random time. When I'm on my PC I barely notice cause I'm not consistently loading something up. However, when I'm gaming (PS3) it's really frustrating because I will always get disconnected. The router is working fine and my PS3 is connected by wire. What should I do? Can it be my internet provider?

View 13 Replies View Related

WRT54G V1 - Internet Connection Breaks Every 3 Seconds

Feb 12, 2011

I have 3 computers at my home, a WRT54G V1 router.

2 of the computers are connected wired to the router, the internet on them works fine. My other computer I have connected via wireless, and when I try to go on the internet every 3 seconds it is saying not available. Now one thing I noticed was that when I connected to the wireless network it renamed it to my computers service tag. I confirmed this via a friends laptop. From "Busted" to "DCLZMRH1_Network", defenetly not something I did.

When this wireless computer is connected, ALL computers on the network begin having the same problem where each 3 seconds everybody is disconnected randomly. However as soon as I turn the wireless computer off, everything goes back to normal on the wired computers.

I have successfuly replicated this issue using 2 different wireless adapters, one USB, and one "wired" the one you put on the inside (lol) I have Brighthouse Networks cable internet

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista™ Home Premium , Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x64 Family 6 Model 15

[Code].....

View 1 Replies View Related

TL-wdn4800 Wireless Connection Drops Out After 40 Seconds

Oct 18, 2012

I've recently bought a new desktop with a TL-wdn4800 wireless device. when i start up i instantly get full bars for my wireless however after about a minute, it drops down to one bar, and becomes hardly usable. i'm wondering if this is the device turning itself off and reverting back to the default inbuilt wireless device?

View 1 Replies View Related

PC Connection Died And Unable To Locate For At Least 30 Seconds?

Dec 29, 2012

I have been with AT&T Uverse at the current place I'm living for almost a month. The connection has been satisfactory for the first three weeks, but this last week my PC's connection has gone diggin through the Earth cause it sure as hell can't penetrate clearly.I personally have three devices, and the two roommates have their own and they have not mentioned any issues with theirs-if they've even noticed.My Devices:PC - OMG FML KMN, Mainly cause I want my EVE (crack)PS3 - No ProblemsTablet - No ProblemsSpeeds have been testing in ranges from 0.09 kbps to 8.25 mbps over five samplings this morning while the tablet's been testing standard speeds consistently.

During Xirrus' "Ping" testing (Yes, I Googled the hell out of and troubleshot this irritation for now almost two days first) my PC's connection died and was unable to locate my connection for at least 30 seconds. This had happened several times yesterday as well with the following instances :EVE Online x 2 clients I lost a thorax cause of itFive peripheral programs: Mumble, Pidgeon, Pyfa, EVEHQ, Garpa At least five tabs open on ChromeMisc software.In the past few days my PC's connection has been highly intermittent-and that's at best. First I thought it has something to do with my video drivers which I updated to no effect. Then I thought it might have something to do with some of the software I use for EVE Online which had me trying variations of running programs to still no useful effect.

I've also switched from the internal wireless device to a NetGear Dual Band adapter, but unfortunately it still produces the same results. This put me at a loss. If my other devices are staying connected, but two independent network devices produced the same failing result on the same PC...wth maaaan. Software? Hardware?

View 9 Replies View Related

Cisco Routers :: WRP400 - Audio Drops For 5 To 15 Seconds On Each Packet Error?

Oct 29, 2012

On several calls i noticed that the outgoing audio stops for 5..15 seconds randomly. I'd say it happens on an average of every 5 minutes.
 
When this happens, i can see that the value after "Call1 Packet error:" increases by one. Why just a wrong packet may stop the outgoing audio for so long? i've much more packet losts (about 3%) but they give me no problem at all.
 
Since a little and cheaper Handytone HT502 gave me intermittent audio too, but the effect was much better (audio still stops, but in a second it comes back), i wonder if is there something i can do by tweaking the WRP400 settings, I'm still using firmware 1.01.00.

View 7 Replies View Related

Arris TM602B Modem Losing Connection For Few Seconds?

Sep 25, 2012

First of all, this is how my connection looks like:

PC & Xbox 360 -> Router (Linksys WRT54GL with DD-WRT firmware) -> Modem (Arris TM602B) Everything is working just fine, except for every now and then (sometimes a few times per day), when my modem decides to "stop working" for a second or two. I do not know if it is exactly the modem, but i guess that it is.

What happens, is that for a second or two, all the lights on modem stop blinking or turns off, except "Power", "DS" and "US". Those lights stays turned on. After a second or two, all the lights continues working normally.

It would not even be that big of an issue, as i would not mind if my internet radio has stopped working for a second or if i had to wait a second before continuing with browsing the web, but it becomes an annoying issue, while i am playing video games on Xbox Live. This is what causes me to disconnect from an online game, even though, everything works normally after - until it happens again.

View 1 Replies View Related

Cisco Firewall :: ASA 5505 Loses Connection To Cloud For 50 Seconds Hourly

Oct 10, 2011

I have an ASA 5505 that during preak usage, likes to lose it's connection to the cloud for 50 seconds. The device is alive and kicking, can route between different interfaces, but it's connection to the cloud dies. This happens every 45 minutes or so during our peak internet usage.
 
the nastyness of the config, I was having issues getting PPTP pass-thru to cooperate, and never cleaned up after myself.
 
Result of the command: "show run"
 
: Saved
:
ASA Version 8.2(1)
!
hostname THEMAN-ASA

[Code]....

View 1 Replies View Related

New Dell Laptop Connects Then Loses Wireless Connection Within Seconds?

Jul 31, 2011

Our entire office runs on wireless connections (laptops, printers, desktops, etc) and we have little to no connectivity issues considering. However, we just purchased a new dell laptop. the laptop connected but within 5 seconds immediate loses the connection and reconnects, disconnects, etc.. This is continuous. All other devices, 2 other never-before connected laptops and a tablet have all sucessfully connected without issues...only this new dell laptop does it. The laptop connects and stays connected to all other wifi connections we have tried it with (other corporate wifi and home wifi's). Dell has replaced the wireless card to confirm there was not issue with that (which I was confident there wasn't). Our IT contact suggests buying a new $500 router, but that is a little hard for me to accept seeing that only 1 device is having difficulties (his other reason for this was his concern that he couldn't access something like the router's management tool, or something like that). New Laptop is running W7 OS..

View 3 Replies View Related

Cisco Switching/Routing :: Nexus 5000 Esx Host Lose Connection To Net-App SAN For 10-16 Seconds

Dec 4, 2011

I have two 5000. Uplinks are Vpc to nexus 7000 and downlink are connected to Esx host. When I reboot one 5000, some Esx host lose connection to the NetApp SAN (Iscsi and CIFS) for 10-16 seconds. This is enought to generate errors and event corruption on disk. The 10-16 blackout occur when the switch as reloaded.
 
My theory is that VPC interface comme up 10-16 seconds after the edge interface(ESX). This create a blackhole effect for ESX host.

View 2 Replies View Related

Linksys E3000 Router / Lose Connection After Monitor Wakes Up For 15 Seconds

Feb 2, 2012

I have been using a Linksys E3000 router for a few months now. Love it. But this last week, when ever I wake my monitor up after it's power saving mode kicks in, I lose my internet connection for about 15 seconds. If you look at the router before the monitor is on, I am connected. The light is on for port 1. But as soon as my monitor gets turned back on, it light just turns off and will reconnect after about 15 seconds. I've looked it up online and can only find things about when the entire system wakes up, and usually those people have to reboot their entire system to get a connection again, or turn the router off then back on. Using Windows 7?

View 4 Replies View Related

Linksys Wireless Router :: E3200 Constantly Losing Connection Every 15-30 Seconds

Jun 3, 2012

Firmware 10.0.4 April 2012 WinXP SP3 AT&T Basic DSL Slipstream 5100 wired and wireless connection constantly drops then re-establishes connection every 15-30 seconds or minutes. How to fix this ventilation is not a problem nor the power source very close to switching to dd-wrt if no solution in 48hrs?

View 2 Replies View Related

D-Link DIR-655 :: Wireless Works But Lan Connection Does Not Have Internet Connection

Mar 21, 2011

I just bought a "DLink Xtreme N Gigabit Router DIR-655"  I configured it correctly.  It works well for the wireless connection but my Lan connection (wired connection) does not work.  The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.

View 9 Replies View Related

Cisco Routers :: WRVS4400N WAN Interface Down?

Jul 5, 2011

Right out of the box, the WRVS4400N [firmware v2.0.1.3] I just purchased says the WAN interface is DOWN; and it simply will not obtain an IP address from the Arris TM602G cable modem it is attached to. Internet still runs great on the old WRT54G. Is this WRVS4400 DOA? Or is there some arcane setting the quickstart guide overlooks? OR?

View 2 Replies View Related

Cisco Routers :: How To Configure WRVS4400n

Dec 7, 2011

I'll just use the 4400n to provide DHCP to my two VLANs and then a new problem cropped up.  I am unable to add a default route to the 4400n's DHCP server.  It uses the 4400n's vlan IP as the default route.  What I'm trying to ultimately achieve is to configure the 4400n as an access point for our "private" network on vlan1 and also "guest" access to the internet on vlan2.

View 12 Replies View Related

Cisco Routers :: WRVS4400N V2 - Setting Up VPN For Mac?

Mar 3, 2013

I'm having problems trying to establish a IP Sec tunnel from the office to home. All of our machines are Macs so I have been using the directions described in "How to create an IP Sec tunnel for MAC Clients, A QVPN alternative" but I still can't get it to work. My setup is as follows:
 
The office is connected to the outside world through a MODEM (Sagemcom 2864 Connection Hub). This MODEM is also a wireless router. It's DHCP server provides addresses 192.168.2.x.The WRVS4400N's WAN port is connected to one of the LAN ports on the MODEM. It's IP address from the MODEM is 192.168.2.x. The WRVS4400N provides addresses 192.168.21.x to devices connected to it.We have a DynDNS account and are using the DDNS client on the WRVS4400N router to connect to it.At home, we have a DIR-655 router with IP Sec Passthru enabled. The router provides IP addresses 192.168.1.x for all devices connected to it. I am fairly sure there are no issues with the router setup at home since I am able to VPN into the office of my full-time job without any problems. I have tried just about everything I can think of but have not been able to get this to work. setting up the Local and Remote Group Settings on the WRVS4400N and the IP address settings in IP Securitas?

View 2 Replies View Related

Cisco Routers :: WRVS4400N VPN Log Shutting Down

Sep 16, 2011

Ive setup a few WRVS4400N over the past 6 months, and have been receiving the below message from some of them every couple of hours.What does the message indicate?

View 1 Replies View Related

Cisco Routers :: DNS On Modem Or WRVS4400n?

Sep 15, 2012

I have successfully got QuickVPN working from Windows 7 64bit into my WRVS4400n.  The router is sat behind another router/modem (Belkin) as the UK uses PPPoA and the WRVS4400n doesn't.So I set up DMZ and changed the DHCP to always allocate 10.x.x.2 on the Belkin which is the WAN side for the WRVS4400n as it is the only thing attached.I have now noticed, and I'm not sure whether it was the case before, that the DNS that the WRVS4400 is showing is the LAN address for the Belkin  Modem/Router (10.x.x.1), not 192.x.x.1 for the WRVS4400n itself.  I assumed setting the Static DNS 1 on the WRVS4400n would do it, but it didn't?When I connect into the network with QuickVPN, the computer names do not show even though I have selected the option in QuickVPN?

View 1 Replies View Related

Cisco Routers :: WRVS4400N Does It Support EAP-TLS

Aug 8, 2011

Our business was looking at purchasing one of these Cisco routers and were curious if it supported WPA2 EAP-TLS?

View 2 Replies View Related

Cisco Routers :: Using WRVS4400N As Gig Switch Only?

Jul 23, 2012

I have 2 WRVS4400N's  available to be. One is running my network and security connected to my WAN.I want to use the other one stricly as a switch or even adding wireless repeat of my current wireless LAN.

View 1 Replies View Related

Cisco Routers :: WRVS4400N Cannot Browse Anything

Dec 16, 2012

Recently installed a WRVS4400N router on my home network. Prior to that I was using the wireless built into my FIOS router. I wanted something more secure so I went with the WRVS4400N. I turned off the FIOS wireless and am only using the cisco wireless.

Im having intermittent issues with the wireless. I have many things hooked up to my wireless including a HP printer and a Sonos system. Most of the time if I just open my ipad I cannot see anything else on my network including the printer. If I try to see the Sonos system can cannot, sometimes I can open the app on my iphone and then I can see it.

Sometimes I can see the printer and sometimes I cant. Sometimes when I do see it and then print to it, it will be gone before it even prints.
I don’t seem to have any issues thru the LAN connections.
 
Also, ive noticed that the wifi is much slower than the old FIOS box.
 
FYI, when I remove the cisco and fire back up the FIOS wifi I don’t have any problems at all at any time. And its much faster.
 
I have tried channel 6, 11 and auto. Also turned off IPC and still no change.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved