Cisco VPN :: ASA 5520 Anyconnect Certificate For PC / Laptop
Mar 26, 2012
We currently are using the anyconnect client using certificates for authentication (ASA 5520 v8.4). It works pretty good but I can only get it to work on a profile basis on the clients laptops. We are running windows 7 and if multiple users need VPN i have to install the certificate for each user. I have changed the xml profile to read the certificate store to "all" and true for certificate store override. I am installing the certificate in the trusted root certificate store. Is there a way for the anyconnect to authenticate for all profiles (users) for the laptop?
View 0 Replies
ADVERTISEMENT
May 28, 2012
I am setting up Clientless Anyconnect on ASA 5520. I have a Verisign Cert but when I go to Certificate Management-->CA Certificates-->Add, I put everything in and click "install certificate" I get an error. FYI I have the Primary Cert Authority Installed already?
View 1 Replies
View Related
Apr 17, 2013
I am having anyconnect version 3.1.03103, windows7 & 8 and asa 5520 (8.4). I have gone through alot of work to solve this issue but it not hapening. On clientless ssl vpn it prompts me for manual certificate selection but on anyconnect client it is not. profile configuration is mentioned below. In the highlighted line below i have changed UserControllable="true" still no results.
<?xml version="1.0" encoding="UTF-8"?>
-<AnyConnectProfile xsi:schemaLocation="[URL]" xmlns:xsi="[URL]" xmlns="[URL]">-<ClientInitialization>
[Code]....
View 0 Replies
View Related
Dec 20, 2012
I am doing a proof of concept with anyconnect and certificate authentication. with 3.0 i was able to do this with a certificate from my CA and a client cert in a smartcard. I have upgraded to 3.1 and now it doesnt work anymore ( i need 3.1 and Asa 9.0 because of IPv6 Split-tunneling).Reading the forum i got some info that the ASA cert must have a EKU value of 'Server Authentication' and the client cert must have a similar EKU (client Auth)
View 4 Replies
View Related
Dec 2, 2011
Can anyconnect clients and cisco vpn ikev1-2 clients use the same certificate on an ASA 5510 ?
View 4 Replies
View Related
Apr 28, 2013
I have a strange issue with certificate based authentication anyconnect. We have an ASA with two internet links, both have a CA authenticated Cert for anyconnect VPN’s. We have an anyconnect client profile also, when we simulate a link failure on the ASA the anyconnect should automatically attempt a re-connect to the backup server list in its configuration (which is the other interface on the ASA 5580) which it does but we get a certificate trust error.
View 3 Replies
View Related
Sep 6, 2011
When i'm trying to connect using stand-alone Anyconnect (not through the web), I got the SSL error message "The certificate you are viewing does not match the name of the site you are trying to view" (attached).
The certificate I installed for the SSL connection on outside interface got Subject CN=testvpn.mydomain and Subject Alternative Name (SAN) --> DNS Name = testvpn.mydomain
It seems to me that instead of connecting to testvpn.mydomain, anyconnect try to connect to the its IP address. I did try to remove the IP address in Server List in the profile, but it still doesn't work.
If I'm using Clientless (through browser), I don't received this error which means the certificates installed correctly.
Is that a bug on anyconnect 2.5.2019 or is there other ways to force anyconnect to check name instead of the IP against the certficate?
View 4 Replies
View Related
Feb 7, 2013
I am having some problems with my AnyConnect configuration.I have configured AnyConnect (ssl vpn / webvpn) on my Cisco 1841 Router, and I can access it from a web browser and start the tunnel, then anyconnect starts up and then the problem come, because when AnyConnect is trying to connect it comes with an error saying "The certificate on the secure gateway is invalid".
I have read almost all of the threads in here about the problem also tried to make a new certificate, but nothing is working?
BTW: I am using self-signed certificate?
View 5 Replies
View Related
Oct 25, 2012
I just upgraded our AnyConnect package on our ASA5510 from 3.06xxx to 3.1. When I tried to log in to the website to automatically install the client, it showed me a big error saying the Certificate is untrusted and I have to explicitly accept it. After accepting it, I had to restart the installation.Is there a way to disable this strict certificate trust setting? We don't have a valid SSLVPN certificate yet, but this big error will confuse endusers.
View 8 Replies
View Related
Aug 19, 2012
we currently have a remote access asa setup using Anyconnect with self signed certificate, and several users in the certificate database as we are using radius and certificate for authentication.
I want to purchase and obtain a trusted CA signed certificate (such as Verisign) and replace the current self signed cert.
My question is will I have to reset the current CA server of the ASA and replace the certificate user database? ie start from scratch.
View 2 Replies
View Related
Jan 22, 2012
I want to connect with AnyConnect Secure Mobility Client 3.0.2052 to ASA 5540 Version 8.4 and SSL Premium License.The clients using Maschine Certificate to authenticate to ASA. This works fine.Now I want to setup a DAP to verifiy the client against the Microsoft AD using LDAP. I configured LDAP server in ASA see:aaa-server LDAP protocol ldap aaa-server LDAP (inside) host ldap.com ldap-base-dn DC=x,DC=x,DC=x,DC=com ldap-scope subtree ldap-login-password ***** ldap-login-dn ***** server-type microsoft ,I can see that it works if I test the server via the testbotton in ASDM and I see it in CLI "debug ldap 255" also. But if I configure in DAP: AAA Attribute ID:memberOf = DomainMember I can not see any request to the LDAP server during I try to connect with the Client und the DAP doesn't match.
View 2 Replies
View Related
Jan 25, 2012
I'm trying to set up vpn with ASA 8.2(5) and Anyconnect 3.0.4235. The goal is to force user to connect from registered machines only (winXP & win7 x32 and x64). To do this, I used machine certificates issued by own CA. Certificate is installed in machine store. I use double authentication (aaa & certificates). Everything works fine, AnyConnect browses cert store, ASA validating machine certificate, then user is prompted for username/password and finally if all is correct - connection is established.My problem is, that for new installation (new host), AnyConnect fails at first connection attempt. If I use aaa authentication only, connection is established, but if I use aaa & certificates - connection fails. The appropriate .xml profile is predeployed at client host asa well as machine and root certificates.Important: When first try (aaa auth) succeded, others are always OK (with aaa. certificate or aaa & certificate authentication). Only the first one fails.The goal is to succesfuly establish connection with aaa & cert.
With DART i get:
******************************************
Type : Error
Source : acvpnagent
Description : Function: CTransportWinHttp::WinHttpCallback
File: .CTransportWinHttp.cpp
Line: 2150
[code]....
Certificate is valid for sure, and as I mentioned before, if first use aaa only, the second try is OK. At ASA with debug crypto ca 255 can't see any certificate from client.
View 3 Replies
View Related
Apr 2, 2012
I have an anyconnect account set up using version 3.0.5080 and connecting to an ASA 5510 base 8.2(2)17. We are using certificates for authentication. If I try and use the account on a windows machine it all works fine.
However on a mac running Lion if I try and connect via a web browser or already have the anyconnect client loaded and try to connect I always get “certificate Validation Failure”. I double checked the certificate was correct and am sure that is correct as it is the same certificate on the Windows and the mac. After searching online I have also tried editing the anyconnect profile to so it is set “certificate store override”, and put the certificates and key in the “user/.cisco/certificates” and “/opt/.cisco/certificates” folders.
After further testing, if I change the anyconnect connection profile to “authentication aaa” I can connect fine. Then if I disconnect, change it back to “authentication certificate” I can connect fine the first time, but all the following subsequent efforts I make fail. If I repeat this process this happens each time, I can connect the first time but after that it fails with the same “certificate Validation Failure” error message. When it connects this first time I checked and confirmed that it is definitely using the certificate. I have also tried using both authentication methods (“authentication aaa certificate”) and had the same problem.
This leads me to believe that my configuration is correct and it is some bug in the anyconnect client or the ASA image. I have had a look through bugs and read somewhere that there was a bug on earlier versions of 8.4, but nothing about 8.2.
View 1 Replies
View Related
Jul 7, 2011
Any instructions to configure an ASA to allow authentication by certificate only on an AnyConnect vpn?I'm running an ASA 5505 with 8.4(1) and AnyConnect 2.4.7030 on an Android phone.I currently have the AnyConnect client connecting ok using username / password for authentication.
I have loaded the company root certificate (internally generated) into the ASA "CA Certificates" and generated an Identity Certificate for the ASA.
View 1 Replies
View Related
Jul 13, 2011
want to connect with AnyConnect Secure Mobility Client 3.0.2052 to ASA 5540 Version 8.4 and SSL Premium License.The clients using Maschine Certificate to authenticate to ASA. This works fine.
Now I want to setup a DAP to verifiy the client against the Microsoft AD using LDAP. I configured LDAP server in ASA see: [code]I can see that it works if I test the server via the testbotton in ASDM and I see it in CLI "debug ldap 255" also. But if I configure in DAP: AAA Attribute ID:memberOf = Domain Member I can not see any request to the LDAP server during I try to connect with the Client und the DAP doesn't match.
View 3 Replies
View Related
Mar 21, 2013
I have an ASA (8.4.5) configured with a connection profile that does AAA and Certificate authentication. Once I have the anyconnect 3.1 on a win Xp system, it works perfectly. When I do a web install, it goes through the normal download, log-in, re-download then says "Certificate Authentication Failure" If I change the profile to AAA only, it installs fine. I even get the error if I launch from the web after I have the client on the PC. Why this is not working?
View 3 Replies
View Related
Sep 20, 2011
ASA 5510 configuration for Csco anyconnect vpn client. Currently ASA is configured for self-signed certificate acces thru anyconnect ssl vpn. So the cert is being generated with every connection (of my understanding, I haven't found any identity certificate on the current configuration, at least on ASDM). Now I need to use a certificate from our local windows CA that we have at the office. I.e. self-signed certs should be changed with another one issued by our local office authority.
1. Generated new rsa key pair on the ASA
2. Generated CSR from identity certificates
3. Applied CSR to the windows CA and generated the certificate
Now I need to understand what is going to happen after I install this certificate on the ASA's identity certificates and apply it to outside interface. Is there anything to be done on the users side to use new certificate? Do they need to download and install the root certificate from the same CA? Do i need to have the root certificate installed on the ASA or identity is enough?
View 1 Replies
View Related
Oct 24, 2011
I am using a cisco asa5520 and i have set up remote access vpn with an AnyConnect connection profile.In the connection profile i have set up that users should authenticate using both certificate and AAA.Due to a high security requirement, the user certificate is issued from a 3rd party. This is working fine and the user now need a valid certificate and a username/password to authenticate successfully.I added the CA certificate as a associated trustpoint on the ASA box to get the certificate verification working.Problem:If Jane and Joe both have a valid certificate AND a valid username/password, Jane could authenticate using a combo of Joes certificate, and Janes username/password. Both are valid (isolated), but i only want jane to be able to authenticate with her username/password and her personal certificate.
View 1 Replies
View Related
Jun 20, 2011
I have a SSL certificate from a third party that is showing under the Identity in ADSM, howerver the audit scan of the firewall shows that the SSL Certificate Signed with an unknown certification Authority. I have installed the Intermediate Primary and Secondary Certificate from the third party under the CA Certificate of the ADSM however when I verify the SSL certificate it still shows as self-signed. What other steps do I miss. I have attached some screenshots.
View 2 Replies
View Related
Jun 21, 2012
I have a Cisco 5520 using ASDM 6.4
Currently my VPN settings use a shared key without certficate to access the VPN. I would like to now set up a self assigned certifcte from the ASA to get users to import the certficate in order to VPN..
View 1 Replies
View Related
Apr 18, 2012
I'm trying to export identity certificates from an ASA 5510 to 5520, I'm exporting in pkcs12 format and specifying a passphrase. When attempting to import to the 5520, I get "error import pkcs12 operation failed" from cli or asdm.
View 1 Replies
View Related
Oct 25, 2011
I have an issue when I´m trying to authenticate my iphone&blackberry device with ASA 5520 using certificates. It seems that certificates are working fine, pass the ike phase 1 but never complete the phase 2. When i use pres hared keys everything works fine with both devices.
If you consider necessary, i can provide my current configuration in asa.
View 2 Replies
View Related
Jul 5, 2011
2 x ASA5520 with SSM20 . using AnyConnect 3 , users are not getting disconnected from ASA even after the vpn client is closed . Users would not be able to login from the same ip until the session is active. Manual clearing of the session enable the user to log back in .
View 1 Replies
View Related
Mar 3, 2013
I have a query regarding MAC authentication for end systems on ASA 5520. Inspite of proving MAC address in endpoint authentication along with AAA, only AAA attribute policies are getting created. MAC authentication is not happening.
Is there any requirement like LDAP or AD is required for MAC authentication?
View 1 Replies
View Related
Apr 8, 2013
I have an ASA 5520 soft 8.2(3) when i try to configure the any connect I don't get the SSL and the telnet options for the connection. bare in mind that i don't have the any connect software on my asa nor do i have any certificate. is it essential to get a certificate. do i have to buy it knowing that it will only be used by our company's partners. if not how do i get it
View 1 Replies
View Related
Oct 15, 2012
We are currently using Cisco VPN Client. I'm looking to migrate to Cisco Any Connect. Our ASA 5520 has 750 IPSec and 2 SSL license. I also have approximately 40 IPSec site to site VPN's on this. ,Will anyconnect interfere with the site to site tunnels?,If I setup anyconnect with the IPSec instead of SSL do I still need to purchase the premium or essentials license?,Lets say if I do have to get the license and I get essentials will it cause any issues with the site to site VPNs?
View 2 Replies
View Related
Feb 17, 2013
We have an ASA 5520 with two VPN profiles working fine.Since some users are now working with Windows 8, VPN clients for Cisco ASA is not able to connect.I have read there are problems for such VPN Clients in that OS, and I should use now Anyconnect for them to connect. I thought we had anyconnect working also, because some users can connect to a web page they can do some kind of connections to internal servers, (web, telnet, rdp, etc) so I installed cisco anyconnect VPN client in a laptop and try to connect (same IP and port I used for that web page) but after signing I get the message AnyConnect is not enabled on the VPN Server.So I tried to follow a configuration guide for Anyconnect, but there's a step in which I am trapped, these are the steps: Click Configuration, and then click Remote Access VPN.
View 7 Replies
View Related
Oct 16, 2012
My client is upgrading from anyconnect 2.5.2014 to 3.1.00495. The ASA is running ASA 5520 version 8.2(5)33 and is in an active/standby failover pair.when trying to push out the new 3.1 from the pair to windows 7 and XP machines, he gets the error "Failed to get configuration from secure gateway. Contact your system administrator". When he tries to push 2.5.2014 and 2.5.6005 out from the pair this works fine.When pushing the 3.1 out from a stand-alone test ASA 5520 it works fine.
View 2 Replies
View Related
Apr 20, 2012
We have bought L-ASA-AC-PH-5520=Anyconnect Vpn Phone License for our Cisco Phones but when we entered this license into our ASA it shows th following i.e enabled for linksys phones. Is there a diff part no to enable vpn for cisco phones. [code]
View 2 Replies
View Related
Sep 8, 2011
When I try to add CAS to CAM a cannot choose a OOB Virtual Gateway or OOB Real-IP Gateway, because these operation modes are absent in Type list.What can be reason it?
View 5 Replies
View Related
Jul 8, 2012
I have an ASA 5520 and I am having trouble getting the AnyConnect VPN authentication timeout feature to work properly. I thought I did have it working a couple of months ago, but right now it is not giving me more than the default 12 seconds. I have tried intervals of anywhere from 25 seconds up to 120. I am currently runnign version 6.4 on the ASA and AnyConnect 2.5.3055.
View 8 Replies
View Related
Aug 18, 2011
We currently have a setup where users connect to the inside of a firewall using the ipsec client. We are moving them to the anyconnect client but are unable to get it to work, we cannot even get a webvpn page on the inside.
When trying to connect with anyconnect the ASA reports an IKE initiator fail on the inside. and no tcp connection flag. We cannot get any response with Webvpn either I have tried using a different tcp port on webvpn but then the asa denies the traffic even though there are no rules denying.
View 3 Replies
View Related
Aug 10, 2012
We are rolling out a new VPN infrastructure utilizing ASA 5520's (one active/standby cluster at each of our two sites) and making the conversion from the old IPsec client over to AnyConnect 2.5 clients. We do have AnyConnect Premium licenses at both sites, but are not utilizing ISE. What we want to do is first auth the machine that's trying to initiate the AC VPN session to determine if it a company-owned machine (with the idea that only co-owned machines can connect), and then auth the user using RADIUS, which uses attribute 25 to assign them into groups for policy application. We have the RADIUS piece working now, but is there a way to first do the machine auth, and then the user auth? We don't just want to use something like cert-based VPN because if the machine gets stolen (or a non-co user otherwise gets into the OS) then we don't want the non-legit user to be able to establish a VPN session just because they have access to a company machine. The other rub is that the machine auth solution must be cross-OS compatible (we use a mix of Windows, MacOS and Linux on the machines that should be allowed to VPN.)
View 7 Replies
View Related
