, I have ipsec vpn setup on an asa5505 at one of my office locations but when I try to log in to the vpn with the vpn client it just dont work but I have a Linux laptop with vpnc loaded and that connects just fine no problems there ? by the way on my windows system i Have vpn client 5.0.07 asa5505 8.0.(4) asdm 6.1.(3)
View 5 RepliesI installed on 2 different PCs (Win7 64-bit) the Cisco VPN Client 5.0.07 with the same VPN profile for 2 different users. We use an ASA5505 (8.0(5) sec plus license) as the VPN end point for the clients. The VPN Clients can connect simultaneously to the ASA, they receive the split tunnel infos but only ONE client can ping the internal network ip range. The other one has no access to the internal resources! When they separately try to connect, there is no problem. Each of them can reach the internal net.On other 2 PCs (Win 7 32-bit) the clients have no problem reaching the internal net (simultaneously connect).
View 0 Replies View RelatedCompletly new to Cisco ASA and need to get this working ASAP.ASA 5505 8.4(1) is the secondary FW and I need for it to allow everything going out and block everything coming in but for the VPN clients. Since a Cisco moron, I used the ASDM and it's wizards to make this work, which might explain my situation.
[code]....
My Cisco VPN Client connects to the ASA and receives 10.10.101.1 IP address, but I get no connectivity to the ASA or any other 192.168.101.x server or service (tried telnet, RDP, ping, etc.)
I did some searching and the answers said it was supposedly possible but no info on how to do it. I am wondering if it is possible to configure a Cisco ASA 5505/10/20 to be a client to an existing (in this case) cisco client vpn. The reasons why are complicated (and imo irrelevant) but basically I need to be able to make a small network that can be on this vpn rather than individual machines.The client vpn is a basic IPSec over UDP Cisco VPN to an ASA5505.So how would I configure another ASA to connect to this like its a client?
View 3 Replies View RelatedI want to set up our ASA5505 firewall to allow access from the Cisco VPN Client software.I have nstalled the client software then tried using the VPN wizard to set up the connection without success, I am running Windows 7 32 bit and Cisco client 5.0.03.0530. [code]
View 22 Replies View RelatedI have just purchased and setup a vpn on my ASA5505 and now I wish to setup a Windows VPN client to use it. Does CISCO have any free vpn clients for Windows?I tried to download a client from the CISCO downloads area, but it's for some kind of purchase agreement. I would have thought that the vpn client was free to download given my ASA comes with two free vpn licenses.
View 5 Replies View Relatedwhen it comes to IOS based SSL VPN setup, so have run into an issue which I can't seem to find an answer for.
What i'm after is a way to restrict access to an AnyConnect authenticated and connected client, on a specific profile, to a list of specific websites (all on the Intranet). Everything else must be blocked.
On the IOS device, I had it fudged to pretty much retstrict access to a certain IP and port, and used a mod rewrite in Apache to re-write a URL from that IP to the host the site actually resided on. It's cludged together and working, but it's not ideal (and it's not going to allow for scaling up to what I need).
I can find plenty of references here and on the net to using regex to create block lists based on a global policy to disallow specific URLS, but I need the inverse of that, and, only applied to a specific policy group.
Is this possible on an ASA5505? Is it possible on *any* ASA?
I use VPN Client 5.0.06.0110 to connect my home computer to my office, which has an ASA5505. If my immediate network connection to the PC client is lost while the VPN is active, I get a BSOD. There's no problem if my DSL drops or a cable beyond my router is unplugged. It only (and always) fails if the network cable to the PC running the VPN Client is diconnected (or if my router loses power) while the link is connected.
View 6 Replies View RelatedI have a PCF file that works fine on Windows XP. The tunnel to the ASA5505 comes up, and I can ping my server at 10.1.1.2.
I take the same PCF file and put it on a Windows 7 machine client version 5.0.07.0440 and the tunnel comes up. But I'm unable to ping my 10.1.1.2 server.
Does something in the pcf file need to change for this version of the client?
I am working with an ASA5505. I have configured a Remote Access IPsec Connection profile. This profile is configured to give clients a virtual ip address via DHCP as shown in this configuration example: url...When the DHCP request is sent from the ASA to the DHCP server, the hostname in the request is set to the name of the IPsec connection profile and a number. Is it possible to have the hostname set to the host name of the client that initiated the connection?Does the ASA support receiving a hostname as part of a IKE Mode Config Request?
View 9 Replies View RelatedI've deployed AnyConnect on Windows 7 clients, and they are throwing this message after few days of usage: "The VPN client driver has encountered an error."
-Version: anyconnect-win-2.4.0202-web-deploy-k9
-OS: Windows 7 Pro 64-bit
-FW: ASA 5505
What seems to fix it:
1. Uninstall Any Connect Client then,
2. Remove C:UsersUserAppDataLocalCisco folder
We have an internal DNS server that all internal hosts do lookups to .. these requests are forwarded onto open dns for anything the dns server isnt authoritative for.. My question is we have purchased the botnet filter and this requires the asa5505 dns client to be active on at least one interface .. Should i point the asa dns to an external IP such as 8.8.8.8 and apply DNS enabled on interface outside ( am using asdm) I don't want the ASA to control DNS for our internal clients we already have a internal server for this, i DO want the asa5505 to check dns packets against its botnet filter, whilst still using open dns for forwarding.
View 1 Replies View RelatedI have the below configuration for a cisco asa 5505. There is a ADSL router in front of the ASA which has a static IP. I set up a remote-access VPN (using the wizard), but I cannot connect to the ASA firewall as the attached VPN client log shows. My only concern is that there might be something missing, ie a static route that goes to the inside interface. [code]
View 7 Replies View RelatedWe have two sites connect with an IPSec L2L VPN.
-Site A: 192.168.13.0/24
-Site B: 192.168.2.0/24
On both sites we have a ASA5505(Base license) to terminate the tunnel.On Site B we also got a remote access vpn to which we can connect using the vpn client.The lan2lan tunnel works fine and so the remote access vpn.Now i want to connect to Site A using my vpn client connected to Site B. [code] There are no vpn-filters or other special policys in place..If tried to ping from my vpn client to Site A while i was debugging ipsec 255 on site B: the asa matched the l2l-tunnel for traffic sourced from 192.168.25.x to 192.168.13.x but when im doing a show crypto ipsec sa detail there are no packets getting encrypted..so of course no packets reaching my asa on site a.
I have a XP workstation behind my ASA that can not connect to a client's network via Cisco VPN Client using IPSec...
In the logs it shows the translation is working on 500 but the VPN Client has the error 412, that the client is not responding.
Config below
ASA Version 8.2(1)!hostname RWFW1enable password encryptedpasswd encryptednames!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.1 255.255.255.0!interface Vlan2nameif outsidesecurity-level 0ip address x.x.x.x
[Code].....
EasyVPN PIX515 server and ASA5505 client?
View 4 Replies View RelatedI need to configure our ASA5505 firewall for remote access to our network using EasyVPN software installed on a laptop. That laptop will be connected in the different places, using DSL or 3G toggle or Public Wi-Fi. For some people it's very easy, but I don't have any experience with firewalls.
View 9 Replies View Relatedinside network----ASA5505========internet===========Remote VPN client.
The ASA has one public IP on its outside interface and using PAT to the internet. It only has two interfaces, inside and outside using vlan. I created a IPSec VPN through CLI. My goal is for the remote client to browse the Internet throught tunnel.
Q1: Is it possible?
Q2: The remote side gets connected and has IP from the pool, with is part of inside network. But it cannot ping anything, including the gateway, which is the inside interface. I debug it, it shows the ASA receives the ping packages, but it doesnt send anything back to the client.
I have just configured a ASA5505 running 8.2.2 as a webvpn server for clientless VPN connections.
I need to setup a particular bookmark for a RDP session which forces the use of the java client for those who can't seem to get the ActiveX control working for some reason or another (virus scanners/firewalls/scerutiy policies etc).
I created a bookmark as follows, but it always tries to connect with the ActiveX control first when logging on from an IE client.
rdp://192.168.1.1/?force_java=yes
i tried to configured L2TP connection on ASA5505.Phase 1 and Phase 2 are completed but Windows Client doesn't work. [code]
View 4 Replies View RelatedWe are finding the price for ASA 5505 to high and our clients are having problem securing budgets for these devices. We don't want to move to different vendors and we have a team of people we already know Cisco well.I have seen Cisco router 877 which have the ipadvance ios, is this the same as the ASA5505.We would like to offer our clients an alternative to ASA5505, but something which can do the same as a edge device but also protect the client from malicious attacks and has CLI.
View 1 Replies View RelatedI ve configures an asa 5505 for remote vpn with anyconnect. it works just fíne - from remote i can ping the Clients and Server inside, i can do RDP or Connect via SSH to any machine, map some volumes local and so on but: I can not connect microsoft sql server. It uses port 1433 for the first connect and establishes then a dynamic connection. So i am a Newbie - what rules or configs do i miss?
View 3 Replies View RelatedI have ASA 5505 with outside interface IP 206.206.206.5 I configured the SSL vpn on this but still i am getting page can not be displaed when opening https://206.206.206.5 from broadband.
Below is the related configuration in ASA. What needs to be done in order to able to connect SSL vpn.
group-policy GroupPolicy1 internalgroup-policy GroupPolicy1 attributesvpn-tunnel-protocol IPSec l2tp-ipsecwebvpn functions url-entry file-access file-entry file-browsing
tunnel-group DefaultWEBVPNGroup general-attributesdefault-group-policy GroupPolicy1tunnel-group DefaultWEBVPNGroup webvpn-attributesnbns-server 10.10.10.11 timeout 2 retry 2
policy-map type inspect http Http_inspect_policyparameters protocol-violation action drop-connectionclass BlockDomainClass resetpolicy-map global-policyclass global-class inspect dns inspect esmtp inspect ftp inspect netbios inspect rsh inspect rtsp inspect snmp inspect sqlnet inspect tftp inspect xdmcp inspect icmppolicy-map inside-policyclass HTTPTrafic inspect http Http_inspect_policy!service-policy global-policy global
webvpnenable outsideurl-list nuk001 "abc002" cifs://10.10.10.1 1
I would like to configure a cisco ASA5505 IPSEC VPN. I used the wizard and tried to connect to the outside .. does not work .. The network is configured in this manner: - ADSL router with public address and internal address 192.168.2.1 -> firewall interface inside and outside 192.168.2.2 192.168.3.1 (my network is 192.168.3.0). I used a VPN to the pools ranging from 192.168.4.1 to 192.168.4.100.
INTERNET ----- ROUTER ------ ASA5505 -------LAN
What should I change? there could be problems between the router and firewall?
I am currently trying to configure an Easy VPN connection from an ASA 5505 to and ASA 5520. I have enabled split tunnelling and in the group policy defined the network to be tunneled but when I activate the VPN it tunnels everything from the host computer connected to the ASA 5505. I get no internet access. Have been trying to troubleshoot this for days.Hee are soe specifics, running version 8.2(5) on the 5505 and the 5520 and below is the local config on the 5505 for the Easy VPN:
vpnclient server **.***.***.**
vpnclient mode network-extension-mode
vpnclient nem-st-autoconnect
vpnclient vpngroup dbernstein-5505 password *****
vpnclient username dbernstein password *****
vpnclient ipsec-over-tcp port 10000
vpnclient enable
and the downloaded dynamic policy:
Current Server : 12.***.163.**
Primary DNS : ***.160.***.39
Default Domain : cisco.com
PFS Enabled : No
Secure Unit Authentication Enabled : No
User Authentication Enabled : No
Split Tunnel Networks : ***.160.***.0/255.255.255.0
Backup Servers : None
I am trying to get a Cisco ASA5505 to get onto the internet using PPPOE through a Netgear DG384 ADSL router. I have the Netgear in Modem only mode - if you put it in Router mode internet access works fine. When I change it to Modem mode, the error I get on the ASA is PADI timeout. Looking through the config I think I am missing a Global NAT??Also not 100% on the best way to set the IP - we have a static IP from the ISP. Do you set the interface to use DHCP and get this address or set it statically? Then do you put the setroute option or put in a static? [code]
View 5 Replies View RelatedShort version is we cannot communicate between our subnets.We have a Cisco ASA 5505 we are using for our network router. We have a Netgear L3 switch behind that with 10 vlans. Each VLAN is on its own subnet. (10.0.10.x/24, 10.0.11.x/24, etc)We have PAT for each subnet to our outside interface. Each subnet NATs out properly currently.I have NAT exemption enabled for 2 of the subnets (eventually I will need all, but am just testing at the moment). I have tried multiple ways for the NAT exemption to allow all traffic from our inside VLANS. At this point in time I am trying to get "Engineering" to communicate with all hosts on "AuthUser". I can ping some hosts, but not as many as if I am directly on the interface. I can reach a port 80 service, but not 443. I cannot access anything via hostname or NetBIOS.What am I missing to allow higher security level interfaces to fully communicate with lower security level interfaces?
View 0 Replies View RelatedWe care currently using an ASA5505 as our firewall and redirecting web traffic to a S160 Iron port. Recently the web filter stopped working and the only way to get filtering again is to reset the redirection.
1. Is there any available log information to find out about the WCCP process and maybe way it stops?
2. Are there keep alive packets or anything of that natural between the ASA and Ironport?
I'm not able to access my Slingbox from the outside. I've set up port forwarding on port 5001 to allow outside connections in, but port forwarding isn't working. Am I missing something?
object network INSIDE-HOSTS
subnet 10.10.10.0 255.255.255.0
object network Slingbox
host 10.10.10.254
object-group protocol TCPUDP
[code].....
I have a cisco ASA5505 configured in transparent mode. This evening we attempted to plug a couple of new servers in but they simply didnt work, despite our test server working absolutely fine. The server IP's are all in a network object group (the same as the test server) and they're all using the same ACLs etc. I'm relatively new to configuring cisco equipment.
the only thing I can think of is a static route I had to add to get the managemet IP to work might be causing problems.route outside 0.0.0.0 0.0.0.0 XX.XXX.132.1 1(IP addresses obfuscated- servers are all in the same range so assume XX.XXX is the same across all IP's).
I have noticed a problem recently that our Remote Access VPN will randomly stop working. I will be able to connect and enter my Username+Password and it says Connected, but I cannot ping Remote Resources. If I check VPN Client Statistics, it shows Many Packets Sent/Encrypted, but None Received. It seems this problem affects all devices at once, but leaves the L2L tunnels intact.
It seems to randomly start working for a while, and everything seems fine until it stops working again. I verified that it is not a firewall problem, and it occurs on multiple ISPs and computers.
We also have 2 Static L2L Tunnels, and 1 Dynamic L2L Tunnel all of which operate flawlessly. All sites/remote users use split tunneling.
Below is the config, I just added the keepalives on the RA Tunnel to see if it would work, I haven't noticed any difference yet.
ASA Version 8.0(2)
!
hostname HQ-ASA5505
domain-name xxxxx.local
[Code]....
I am trying to configure my ASA5505 to allow SMTP relay and the ACLStatic I created is not working. [code]
View 3 Replies View RelatedWe have a scenario where the Cisco ASA 5505 will be one end of a site-to-site VPN. The same ASA 5505 also allows Client VPN connection. The question is around IP pooling. If I assign a pool of IP's (192.168.1.20 - 192.168.1.30) for Client VPN connections - do I need to be sure that those same IP's are not used on the other side of site-to-site VPN ?
There could be PC's/Servers running 192.168.1.0/24 on the other side of site-to-site VPN. Would this cause an address conflict ?