Cisco VPN :: VPN Users Unable To Access Internal Network - ASA 8.3.1
Nov 19, 2012
I have a base config of AnyConnect VPN below, however the ASA 8.3.1 code has deprecated some commands and the VPN/NAT/FW rule syntax is quite different. Can som point out what's missing from the pertinent config below that prevents the VPN Pool from accessing the internal LAN?
The Core LAN router is 1.2.3.1.
!
ASA Version 8.3(1)
!
interface Ethernet0/0
nameif inside
security-level 100
ip address 1.2.3.2 255.255.255.0
View 2 Replies
ADVERTISEMENT
May 7, 2012
I have created remote access vpn in my ASA 5505. The tunnel is established but i am not able to access the internal network.
View 3 Replies
View Related
Sep 27, 2011
we have a ASA 5510 firewall and i have created remote vpn user who connects the internal network via vpn any connect after connecting i want him to only access his internal PC via rdp and not access other internal website or shared folders without connecting to the RDP however now he can access the internal website wihtout connecting to RDP?
View 3 Replies
View Related
Aug 12, 2012
I have two ASA 5515 configured in failover (active / standby).I used the ASDM wizard to create connections through ipsec cisco client.Currently users are able to connect but can not do a ping to anywhere inside the network.
The ping request is received from the internal client but the internal client can not communicate with the remote user.The ping fail also directly from the ASA.
When the remote client is connected an entry is added to the routing table:
S 192.168.10.130 255 255 255 255 [1/0] via <ip of the ISP>, "WAN"
as if that IP was reachable directly from the Internet.I tried changing the settings of the NAT but in no way I can make them communicate.The ultimate goal would be to create different users with different access permissions to the LAN and the other subnets in the company.
View 2 Replies
View Related
Apr 4, 2012
How does one configure the router so that Internet users can access internal company websites? The only thing that appears is the Cisco router login. Also I need to configure Terminal Services and its not on the list under Service.
View 2 Replies
View Related
Nov 22, 2011
I running site-to-site IPsec VPN in Cisco 2811 IOS 12.4 both site. Here I encounter a problem to access server on Site A from Site B
Site A having Leased Line connected to router with Public IP. I have done static mapping 1 web server to Public IP (NAT). This to allow external users to access the server via Public IP. At the same time, users at Site B would need to access to same server via Internal IP since they have Site-to-Site VPN established. But once I done Static Mapping (NAT), user at Site B unable to access the server at Site A using its internal IP. But external user can access server via Public IP. What went wrong here. Do i need to add extra command to get this done?
View 3 Replies
View Related
Jun 9, 2013
I have a weird problem which I have already submitted a TAC ticket about. When users authenticate through AnyConnect into our HQ ASA 5510 they grab an address from 172.16.254.x. What we have been noticing intermittently is that when logged into our network through the client they are unable to access their resources at one of our remote offices which is connected over l2l to the HQ ASA. This problem just started randomly a week ago and we have been working with Cisco trying to create a solution.
My quick fix is logging into a device at the remote office which is trying to be accessed and pinging the gateway of the virtual subnet for AnyConnect users. When I ping 172.16.254.1 it goes through after a few dropped icmp packets and then the issue is resolved for about 8 hours or so.
View 1 Replies
View Related
Nov 28, 2011
I have a issue that i am at a loss as how to solve it. I have an ASA 5505 as my firewall. I have users from other companies who visit from time to time and are unable to use their outlook email to send messages. They can however receive messages without a problem. I also have a situation where users who use windows live to access gmail are unable to send messages.
I have narrowed it down to the fact that these uses are using ssl/tls to send the mails. I did some research and found out about the inspect esmtp setting in the ASA. I have disabled it and i still have to problem. I have also removed all outbound deny statements and still no luck.
Of note is that i can send emails without attachments. They take a long time to go out ( from minutes to hours) but eventually they do. Emails with attachments of even 10k do not go at all.
I was running image 8.2.3 and i downgraded to 8.0.5...still did not work...i upgraded to 8.4.3...still did not work. I am now back at 8.2.3.
My Firewall config is attached. I am at my wits end as to what else to try. The company has not renewed support for the device so i am on my own here!
View 2 Replies
View Related
Apr 21, 2012
I have two offices connected with an IPSEC VPN tunnel using RV220W routers. The Tunnel works fine for local users between the two sites(Site 1:10.0.0.x; site 2 is 10.0.2.x). I have also set up PPTP users for remote access. PPTP users that connect to site 1 cannot access site 2 and vice versa. The PPTP users have no trouble accessing the resources on the site that they connect to. I have tried activating RIP and adding various static routes with no success. If I PPTP connect to site 1 and I tracert to an IP address on site 2 the route goes to the site 1 router and then goes to the internet(connected to the site 1 router) where it stops.
View 2 Replies
View Related
Mar 17, 2013
I have created a VPN connection for ASA 5512-X by using the wizards and nothing seems to be wrong on the wizards's config.I am able to connect to the network by using the VPN but unable to ping internal network.Below is my config for your reference:
Result of the command: "sh run"
: Saved
:
ASA Version 8.6(1)2
!
hostname FAA-ASA-1
enable password crzcsirI44h2BHoz encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code].....
View 6 Replies
View Related
Oct 10, 2012
I'm able to build my tunnel but unable to RDP nor ICMP back to the internal network.
VPN Client IP: 192.168.200.200
INTERNAL IP: 172.17.130.200
my configuration is below:
HOME-ASAFW02(config)# wr t: Saved:ASA Version 8.4(4)!hostname HOME-ASAFW02domain-name hsd1.nj.comcast.netenable password ViPq56cvd3SGvB08 encryptedpasswd 8bcozHCAwCqA5BmN encryptednames!interface Ethernet0/0description OUTSIDE-Connectionswitchport access vlan 2switchport protected!interface Ethernet0/1description INSIDE-Connectionswitchport protectedspeed 100duplex full!interface Ethernet0/2description WiFi-LinkSYSswitchport access vlan 3switchport protected!interface Ethernet0/3shutdown!interface Ethernet0/4shutdown!interface Ethernet0/5shutdown!interface Ethernet0/6shutdown!interface Ethernet0/7shutdown!interface Vlan1description INTERNAL-Networknameif insidesecurity-level 100ip address 172.17.130.129 255.255.255.128!interface Vlan2description OUTSIDE-Link-to-ISPnameif
[code]....
View 12 Replies
View Related
Mar 22, 2010
Have a WLC 5508 running 6.x code with LAP's providing wireless for our internal laptops (WPA2 and EAP-TLS). I want to provide guest wireless which goes out a different port on the WLC to a guest firewall/cable modem. However, we want to prevent our internal laptops from being able to use the guest wireless. I have RADIUS (IAS) and LDAP for my AD available. We would prefer not to have use Lobby Ambassador and just have the guests use a simple password or web passthru. Guests may be laptops or smartphones. What options are available? I have tried a test setup using dynamic vlan assignments from RADIUS using the IETF flags, but can't seem to get it to work. Is there a way to identify the SSID is being used at the RADIUS server?
View 13 Replies
View Related
Oct 28, 2012
I seem to be having an issue with my PIX configuration. I can ping the VPN client from the the internal network, but can cannot access any resources from the vpn client. [code]
View 4 Replies
View Related
May 18, 2011
We have ASA5510s and I've configured an SSL VPN using AnyConnect.. The VPN address pool is 10.10.10.0/24 and our internal network is 10.10.20..0/24. After successful login, using LDAP. the client receives a 10.10.10.0/24 address from the pool, but cannot access anything on the internal 10.10.20.0/24 network. I've toyed with access lists and NAT exemption, but to no avail. What do I need to do?
View 8 Replies
View Related
Nov 13, 2012
we recently upgraded from an RVS4000 router which didn't have this issue.
the problem; Internal users from Site A cannot access the external owa address.From Site A i can successfully ping both the external/internal IP addresses/names and they resolve correctly, including pinging the address ('mail.company.com") resolves correctly to the external ip address.
[code]...
View 1 Replies
View Related
Feb 26, 2013
I have some problem with the ASA 5510 ver 7.0(6). My manager wants to keep this as backup. tried lots of things but still users not able to access internet nor can i ping anywhere.For example when i ping 4.2.2.2 i dont get any reply.The runing config is below for ur ref :
HQ-ASA-01# show running-config
: Saved
:
[Code]......
View 9 Replies
View Related
Feb 24, 2011
I have a normal setup of ASA5505 (without security license) connected behind an internet router. From the ASA5505 console I can ping the Internet. However, users behind the Firewall on the internal LAN, cannot ping the Internet even though NATing is configured. The users can ping the Inside interface of the Firewall so there is no internal reachability problem. In addition, I noticed that the NAT inside access list is not having any hit counts at all when users are trying to reach the internet.
When i replace the ASA5505 with a router with NAT overload configuration on it, the setup works normally and users are able to browse the internet.
The ASA5505 configuration is shown below.
hostname Firewall
interface Ethernet0/0
description Connected To Internet Router
switchport access vlan 10
[Code].....
View 2 Replies
View Related
Mar 14, 2011
I am trying to build a remote vpn in ASA 5520 Software Version 8.3(1). I am using ASDM 6.3(1) for the configuration. I went through the SSL VPN wizard and did the configuration. I tried connecting to the ASA using anyconnect VPN and I could successfully connect the VPN. My home laptop takes an IP 192.168.60.21 (which I have defined in the wizard). Now my issue is, I can't access any office internal network from this laptop (none of the internal IP is ping ing even). Meanwhile, I could ping and rdp to this laptop(which is connectd by anyconnect VPN) from my office network. One thing I noticed is that when I give a traceroute to an internal IP from the laptop, the first hop goes to my home ISP router.
View 8 Replies
View Related
Apr 9, 2012
What I got is a 5505 ASA firewall and I'm connected to it via VPN. I'm pulling an 192.168.169.x address because that's what we set their company's internet LAN to. Which is what we want. What I can't do while I'm VPN'd in is ping from the internet network to the DMZ, and the same when I try and ping from the DMZ to the internal network.
The DMZ is on a 196.0.0.x network.The internet network is 192.168.169.x network.
I don't need them to have internet access on the DMZ I just want to be able to access it from the internal network. What is going on is we need them to be able to VPN into the DMZ and access their equipment. At this point it would just make me happy to be able to ping from the internal network to the DMZ and I can figure it out from there I've setup rules and applied them and when I wasn't having success I referred back to defaults. Right now the rules are set at default, any thing in and anything out, on both internal and DMZ. I'm using a VPN client and going through Cisco ASDM Launcher to setup the rules and static routes, I haven't done anything with the command line. All the research I've done everyone does it command line, I find it easier to do it GUI. This is my first time working with an ASA firewall.
View 2 Replies
View Related
Dec 9, 2011
I configured one ASA 5510 firewall with CSC-SSM-10 in one of my customer location.
Here i want configure my firewall to send email alerts to particular mail ID, if anybody any access my network from outside( Like VPN users).
View 1 Replies
View Related
Feb 28, 2013
I have created a new sub-interface on our ASA 5520 for guest internet access.
My goal is to allow access to a few specific services hanging off some dmz interfaces on the same firewall and full unrestricted access to the internet only. Everything else should be out of bounds.
The order of the rules I plan to setup on the guest interface inbound are:
#1. <rules to allow access to specific services in the dmz>
#2. <block any ip access to the entire private network ip address space>
#3. <permit ip any any>
#1. These rules will give access to the guest user to services located in the dmz
#2. This rule will block all access to any services in the private ip address space (thus blocking access to all internal services)
#3. This rule is to allow access to any other services i.e. the internet.
Is this the best way to achieve my goal in the most secure way or is there a better way? i.e. is there a way to force the traffic by default to only go out the outside interface unless there is a specific rule allowing it go elsewhere?
(Of course Dynamic PAT will also be configured for traffic coming from the guest interface to the outside interface.)
View 2 Replies
View Related
Aug 1, 2012
After connecting via anyconnect client 2.5, I cannot access my internal network or internet. My Host is getting ip address of 10.2.2.1/24 & gw:10.2.2.2
Following is the config
ASA Version 8.2(5)
!
names
name 172.16.1.200 EOCVLAN198 description EOC VLAN 198
dns-guard
!
interface Ethernet0/0
description to EOCATT7200-G0/2
switchport access vlan 2
[code]....
View 5 Replies
View Related
Aug 23, 2011
I am using ASA 5520 with 8.2.4 IOS. I'm new to ASA/Firewall. I need to do access webserver from outside network.From Laptop (192.168.2.51), If I connect to url... it should open page from 10.10.10.50.I also need to ssh to webserver from laptop. If I ssh to 192.168.2.50 from laptop, it should connect to 10. 10. 10.50. [code]I can't get to webserver from outside network, so now, I connected laptop to directly ASA 5520 outside port with crossover cable.ASA Inside port connects to L3 switch. Webserver also connects to L3 switch. But still doesn't work.
View 9 Replies
View Related
Oct 31, 2011
I have configured Clientless SSL VPN for access to ASA 5540 internal network. Still I am unable to take ssh to my core switc [code]
View 5 Replies
View Related
Dec 18, 2012
I have the syntax correct and thought process down right on a solution to allowing guest wireless users access to an internal webserver. (DMZ discussion aside)
We have an ASA5510 with interfaces setup as:
outside - 65.x.x.x address
inside - 172.20.1.2
guest_inet - 10.2.1.1
Internally clients resolve our website to 192.168.40.40 and that part works as it should. Clients outside of our network resolve our website to the correct external address (lets just call it 1.1.1.1). We have a NAT statement static (inside, outside) 1.1.1.1 192.168.40.40 netmask 255.255.255.255 and an ACL to permit tcp any host 1.1.1.1 eq www
Clients on our guest_int use an external DNS server and hence resolve our website to 1.1.1.1. However it seems traffic goes out and back in our outside interface and this connection never occurs.
What I'm wondering is the correct NAT statement / ACL to add that would allow our internal clients on the 10.2.1.x network to access our internal website. Would that be: static (inside,guest_inet) 1.1.1.1 192.168.40.40 netmask 255.255.255.255 ? Since there is already an ACL permitting port 80 traffic to 1.1.1.1 we should be taken care of on the ACL side of things, right?
View 3 Replies
View Related
Sep 10, 2012
I have a 5505 between a vendor router & my company network, vendor is not able to access devices on internal network. I am also not able to access the firewall via asdm
View 10 Replies
View Related
Jul 4, 2012
My company is using an RV016 router as a gateway to our internal network. My end goal is to allow remote users to access network shares via Samba.I've been trying to create a VPN using the router with absolutely no luck. I've tried QuickVPN. I've tried creating a client-to-site group vpn. I've tried creating a client-to-site tunnel vpn. I've tried pptp. Nothing will allow me to establish a VPN connection. Sometimes there is information logged in the router but most of the time there is not.
View 1 Replies
View Related
Jan 23, 2012
We have a Cisco wireless infrastructure in place that includes a guest network with its own subnet that is a sub interface of the inside interface on our ASA 5520. There are no routes for it to be allowed access to the internal subnets. So it can only access the internet. This is primarily used by the public, but we have several non employee personnel that we only want to give internet access and force them to access the internal network through our clientless SSL vpn portal or through other internet facing internal resources such as webmail.I have done packet traces from within the ASA and the break appears to be there is no ACL allowing the traffic back into the network once the web resource replies to the request and the traffic is attempting to come back into the network from the web resource. Is that as clear as mud?
I know that this has to be a common problem and a way around this is to allow the guest wireless network access to the internal network but only for the select resources that they require. And that this can be done seemlessly by network specific routes and or alternate DNS entries, but I would like to keep this simple and just allow them to access the web resource, webmail and VPN, from the guest wireless using internet DNS servers without route trickery.
View 8 Replies
View Related
Mar 20, 2012
Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1) Is there any way through static route to access the TMG internal network through RV042 pptp server?
View 1 Replies
View Related
May 9, 2012
I have configured a Remote access vpn on pix 525 with 7.2(4) code. After getting connected (with ip address assigned from the pool) i am not able to reach any of the internal networks. [code]
View 3 Replies
View Related
Jan 21, 2011
I've ran into an issue that I haven't seen before. A client of mine has a WLC that manages AP's at several different sites on the East Coast. They are all connected via a multilinked T1x2 connection. One site in particular contains 7 AP's, and users at this site are unable to connect. The remaining sites have no issue at all connecting. I noticed that when users began reporting this that all AP's had failed interference profiles. Also, when I instruct a user to attempt a connection, I don't ever see their mac address come across a debug session on the controller, which I find odd. Is it possible that a neighboring business is sending deauth packets and containing my AP's?
The client is running code version 4.2.61.0.
View 2 Replies
View Related
Apr 7, 2013
This isn't a big deal as the rest of the ACL works fine, but this is an annoynace since the web auth redirects to our company website (internal for now) after successful login.We have a Cisco WLC that provides access to our production and guest wireless environments. The guest environment of course is in a separate vlan (10.10.50.0/24). So I created this ACL:
access-list 107 permit udp any host 10.10.2.13 eq bootpc <----internal DHCP server
access-list 107 permit udp any host 10.10.2.13 eq bootps
access-list 107 deny ip any 10.10.0.0 0.0.255.255 <---all internal networks
access-list 107 deny ip any 172.28.16.0 0.0.0.255 <----DR Network
access-list 107 permit ip any any
int vlan 50
Desc "Guest wireless network"
ip access-group 107 in
This ACL basically gives the wireless guests access to an internal DHCP server and full access to the internet. For the 10.10.50.0/24 scope, the DHCP server assigns Internet DNS servers and my rationale is that wireless clients would access it via the external IP address but I suppose it doesn't work quite like that with the website being behind the same router as the client machines.
View 1 Replies
View Related
Sep 18, 2012
I have ASA 5510 and configured client VPN or Annyconnect VPN, when I connect to the ASA remotely using anyconnect I am able to get IP address as configued, from Internal network I can ping and RDP that anyconnect VPN desktop, but the problem is from the remote anyconnect VPN client I am unable to access internal network, when I use ASA packet tracer and check traffic from internal to anyconnect pool of addresses it gives result ok, but when i use packet tracer to check traffic on outside interface from anyconnect address pool to internal subnet it always gives the packet is dropped at WebVPN - SVC, and I can find any where related configuration for that.
View 5 Replies
View Related
