Cisco VPN :: Configure ASA 5510 As EasyVPN Server?
Dec 5, 2011I have a Cisco ASA 5510 and a Cisco ASA 5505. I want to configure the ASA 5510 as Easy VPN Server and 5505 as Easy VPN hardware client.Using either CLI or ASDM.
View 1 Replies
ADVERTISEMENT
Cisco VPN :: To Configure 1941 K9 As EasyVPN Server
Jul 11, 2012I have been trying to configure Cisco1941/K9 as Easy VPN Server through CiscoCP.The tunnel comes up but I cannot pass any traffic to the secure LAN (GigEth 0/1). When the tunnel comes up, I can ping the Loopback interface and the GigEth 0/1 interface IPs.
View 21 Replies View RelatedCisco VPN :: 5505 - Configure ASA Server And EasyVPN Client?
Apr 28, 2011So I have three ASA 5505 firewall. my firewalls we are in the test environment. I read on the net that when you have a situation like in my company where are headquarter and two offices, i should put in each branch office and headquarter one asa firewall and a firewalls should be configured as easyvpn.
VPN server is in headquarter and easyvpn's are in branch offices. i tried everything, but we could not configure them. maybe it's not a problem that in my test environment at my the external interfaces which have static addresses on these three firewalls, respectively serever 192.168.2.1, 192.168.2.2 and 192.168.2.3 client client. I seted firewalls by following the instructions, but does not work
[URL]...
I solved the problem with the server as a remote access VPN. client workstations that are on the 192.168.2.0/24 network can access a local LAN via VPN. But when you put the ASA 5505 firewall. clients on the LAN side of the firewall can not access the VPN. I use software products Cisco VPN Client 5.0.06, but when I create a connection and try to connect to get an error secure vpn connection terminated locally by the client. reason 412: the remote peer is no longer responding.
Cisco VPN :: ASA 5510 As EasyVPN Remote?
Aug 12, 2012Can the Cisco ASA 5510 appliance be used as an EasyVPN Remote device, or only as an EasyVPN Server?
View 1 Replies View RelatedCisco VPN :: 5510 - Nat Can't Work With EasyVPN
Mar 15, 2011I have one ASA 5510 on main office that access the internet trought of a private link and one ASA5505 on the branch office that access the internet trought of a ADSL link with dynamic IP.
Behind ASA 5510 the network is 10.8.40.0/24 and behind the ASA 5505 the network is 10.30.103.0/24. I want access both network trought of the frame-relay link and the internet link with EzVPN.I make that access only ip on the main office, this comunication go to frame-relay link and the everyone go to the VPN.When the traffic go to the frame-relay link, I use a NAT Static Policy that change the source 10.30.103.0/24 to source 10.40.103.0/24. Its work OK when a VPN do not UP.When the VPN is UP, the NAT dont work and the packet go to the true IP (10.30.103.0/24).
Cisco VPN :: Configure ASA5505 For Remote User Using EasyVPN Client?
Jul 5, 2011I need to configure our ASA5505 firewall for remote access to our network using EasyVPN software installed on a laptop. That laptop will be connected in the different places, using DSL or 3G toggle or Public Wi-Fi. For some people it's very easy, but I don't have any experience with firewalls.
View 9 Replies View RelatedCisco VPN :: Playbook And 831 EasyVPN Server?
Jun 16, 2011I don't seem to be able to connect to my cisco 831 router with easy vpn server configured using my Blackberry Playbook. Looking at the console of the router i can see the debugging but am not sure what it all means.
Current configuration : 2574 bytes!version 12.3no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!enable secret 5 $1$FM71$y4ejS2icnqX79b9gD92E81enable password xxxx!username CRWS_Ritesh privilege 15 password 0 $1$W1fA$o1oSEpa163775446username shamilton privilege 15 secret 5 $1$wFLF$8eRxnrrgVHMXXC0bXdEGi1aaa new-model!!aaa authentication login default localaaa authentication login ciscocp_vpn_xauth_ml_1 localaaa authorization exec default localaaa authorization network ciscocp_vpn_group_ml_1 localaaa session-id commonip subnet-zerono ip
[code]....
Cisco VPN :: 1921 - Create EasyVPN Remote Connection To Our ASA 5510 At Work?
Oct 26, 2012I would like to use a Cisco 1921 at my house and create a "Easy VPN Remote" connection to our ASA 5510 at work. Can I use the Easy VPN Client with the base license, or do I need the security license to take advantage of the VPN tunnel?
View 4 Replies View RelatedCisco :: CIPC Not Registering On EasyVPN Server?
Feb 25, 2013How to setup option 150 in IP pool on VPN Client.
View 2 Replies View RelatedCisco Firewall :: Configure ASA 5510 For Individual Server Traffic Routing
Jan 27, 2013I am wondering if this is possible. We have multiple internet connections with fixed IP's coming into the office. We'd like to use one for FTP backup and another to service our websites. From what i have read a 5510 doesn't do policy based routing, but we'd like to configure our ftp server to use one of the internet pipes and our webserver to use another internet pipe. Is that possible?
We'd have two outside fixed IP interfaces and two internal interfaces. I could then use one of the internal interfaces for the web server and the other for the FTP server. consequently if the internal web server and FTP server use the fixed IP"s corresponding DNS server wouldn't that effectively route all FTP traffic out one interface and all web traffic out the other?
Then the FTP traffic would be NAT'ed to an internal interface and the HTTP & HTTPS traffic would be NAT'ed to a separate internal interface.
Then if each of the internal servers used the corresponding internal NIC on the ASA as it's gateway and the fixed IP's that correspond to the external DNS server, then it would affectively only use that gatway out for traffic? Would that work? Does it should route traffic out those pipes correct? Will the asa support two different next hop routers for the two different interfaces?
Cisco VPN :: 5505 How To Change EasyVPN Head-end Server Address
Jan 19, 2012We have a number of 5505 ASAs at remote sites all of which are configured to connect to one of two head-end servers.We need to change the primary head-end IP addresses. At the moment devices are successfully connected to the secondary.If we issue vpnclient server i.j.k.l e.f.g.h then the device drops off the network and won't reconnect until it is power cycled.If we make the changes in ASDM using the GUI to remove the old primary and add in the new primary the ASDM says "No changes made".Devices are running 8.2 and 8.4 code and behaviour is the same.
how to change head-end server IP addresses without the device disconnecting and not coming back up? According to the configuration guide the ASA should cycle through the addresses every 8 seconds until it can connect - but it doesn't seem to do this as it won't connect to the good secondary head-end either!
Cisco VPN :: Sharing EasyVPN PIX515 Server And ASA5505 Client?
Nov 2, 2011EasyVPN PIX515 server and ASA5505 client?
View 4 Replies View RelatedCisco VPN :: EasyVPN Server (Router 2911) VPN Client On Windows 7?
Oct 11, 2012I have couple of issues with my EasyVPN server and Cisco VPN Client on Win7.
1: VPN Client establishes the connection, traffic flow, destination network can be pinged. After a few minutes traffic stops passing the VPN. No ping to IP or DNS names can be made. In order to resole it. Users have to re-establish the VPN again. Occastioanl it stays and continue to work.
2: VPN Clients don't pick the same IP address from local address pool even though I specified "RECYLE" option in the IP local pool command.
Configuration:
##############################################################################
TQI-WN-RT2911#sh run
Building configuration...
Current configuration : 7420 bytes
!
! Last configuration change at 14:49:13 UTC Fri Oct 12 2012 by admin
! NVRAM config last updated at 14:49:14 UTC Fri Oct 12 2012 by admin
[code].....
Cisco VPN :: 3945E ISR Router As EasyVPN Server / Local Usernames Restrict Management
Jun 24, 2012I am using 3945E Router as Easy VPN Server, with 15.1 IOS. On router I have bunch on usernames for VPN authentication, I want to restrict Router management access for them(ssh,telnet, http and so on).
View 2 Replies View RelatedCisco Firewall :: ASA 5510 / Add A Mail Server In The LAN And A Webmail Using Port 3000 On The Server?
Jul 24, 2011I'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.
WAN ----- ISP Router ---------- FW ---------- LAN -------- Mail Server + Webmail
| (25) | (3000)
194.x.x.69 192.168.1.254 192.168.1.6
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?
Configure Windows Server As Both ISA Server And AD DC?
Jan 25, 2013I know the best thing one should do is install an ISA server and an Active Directory Domain Controller on separate servers. But for some reason, I want to configure my Windows Server 2003 as an ISA server as well as an Active Directory Domain Controller. What can happen to my server making it run improperly. For example, my ISA server will function mainly as a Firewall, I wonder if all the rules I create in ISA server determine what I mean it should work or I have to consider any affection from Active Directory DC to those rules?I have to ask this question because I've already installed both ISA and AD DC on my Windows Server 2003, already created an Allow. All rule (just for testing connection) in ISA server but I can't ping from all the clients to my server, all the clients can ping each other and the server itself can ping to all clients. I just think that may be the affection from AD DC to my AllowAll rule in ISA server.
I successfully created some rules that worked greatly as they should work but when I hadn't installed AD DC yet (just installed ISA), however right after installing AD DC, it still worked well (this made me think that AD DC didn't affect to how ISA works). Then I configured a little related to DNS server, and maybe something I don't remember exactly and now I can't ping from my client PC to my server. My network is virtualized using VMware 8 workstation and GNS3, at first there is no need of GNS3 because I just want to test my internal network (some clients connected to the internal interface of ISA server). Depending on VMware that I can't be sure if it is some fault of VMware or any other thing but my configuration on the servers.
Cisco VPN :: Configure VPN To ASA 5505 Behind ASA 5510?
Aug 14, 2011Attached is a diagram of my network. My company has leased some office space to an outside company that handed me a 5505 and said "We want to VPN to our HQ through your Internet". I have two issues: I need this to work and I need to be able to access the 5505 from the management network. I don't care about the VPN aspect as much as making sure that I have basic communication down. I have everything configured per the diagram, but I can't ping the 5505 outside (Vlan 2) interface. I want to be able to configure and test the VPN setup on the 5505 from Putty on my PC.
The default route on the 5520 sends traffic to 10.10.1.1 and the default route on the 5510 sends traffic to the WAN interface. I added this route on the 5510:
outside 10.94.4.0 255.255.255.0 10.10.8.1
I still can't ping the default gateway on the 5505. There is a switch between my PC and the 5520 but the default route passes the traffic to the 5520. However on my tracert I don't even get to the 5520. Do I have to add a route to the switch just to manage the ASA 5505?
Cisco Firewall :: How To Configure ASA 5510
Sep 11, 2011I'm having a problem configuring an ASA 5510. A previous employee started the config and left abruptly. He established a VPN Tunnel between two of our sites and that's working without an issue. The problem is, the network behind the 5510 at the remote location cannot access the internet.
ASA Version 8.2(1)
!
hostname PH-Firewall
domain-name pleasehelpme.com
enable password HXrQty4kqW8s8yeE encrypted
passwd ucA.qrYJWD9UyIFz encrypted
names
[code]....
Cisco Firewall :: Configure DMZ On ASA 5510
Mar 3, 2013I am confiuging a DMZ on my ASA 5510 but I have run out of physical ports, since I have dual Wan ports configured. I plan to implement a DMZ using subinterfaces. I have 2 questions:
1) Do I need to configure a Vlan to complete this task?
2) Do I need to re-configure the other interfaces for subinterfaces and/or vlans as well?
Cisco Firewall :: How To Configure ASA 5510 8.2(1)
Jul 25, 2011I'm trying to configure an asa 5510 8.2(1)?I have a range of pub ips 3*.108.234.145-150
>>> E0/0 3*.108.234.146 outside public
>>> E0/1 192.168.1.1 inside
>>> E0/2 192.168.3.1 dmz
would like to map dmz host 192.168.3.107 to external 3*.108.234.147 on port 5000 and 50001 LOCAL LAN should also be able to get to dmz host ports.i've tried a few configs and also following this example:
[URL]
without any luck, here is my config, also posted the out put of show arp which is able to see and ping the host on dmz, also the output of show access-list which shows hits to it.
prophase-pix(config-if)# show running-config
: Saved
:
ASA Version 8.2(1)
!
hostname prophase-pix
enable password encrypted
[code]....
Cisco Firewall :: How To Configure ASA 5505 And 5510
Mar 18, 2012I am absolutely new in the enterprise firewall world but I would like to start learning how to configure ASA 5505 and 5510. I did some research myself and I found that the material or the topic itself is a huge adventure (lots to read and understand). My company uses IOS versions until 8.2 due to the differences in the NAT-ting rules with 8.3 and 8.4.
View 1 Replies View RelatedCisco Firewall :: Configure ASA 5510 For ActiveSync
Feb 28, 2012I need to allow connection from IPHONE (in Internet) to connect Exchange on private network, synchronising with activesync (https) We have a microsoft TMG on frontal (inside network)
What is the method to parameter CISCO ASA using clientless access: Port forwardind? smarttunnel, web proxy? Nat?
i want the activesync request to cross ASA to go directly on TMG without asking password and user
Cisco Firewall :: ASA 5510 - Getting Error When Try To Configure
Aug 21, 2012I recently bought an all brand new ASA 5510 and it is here by my side. I'm trying to configure it but when entering https://192.168.1.1/admin I get Page Not Found error on IE. I'm able to ping 192.168.1.1 and have success telnet 443 port.
View 13 Replies View RelatedCisco WAN :: 5510 - Configure All Public Ip Add On Router And ASA?
Aug 16, 2011 how to configure public ip on router 1841 and ASA 5510. let me show you my issue that: i have router 1841 ( for F0/0 use pubic ip add 10.10.10.1 /30, and F0/1 use other rang public ip add 20.20.20.1 /24) and on ASA 5510 i use public ip add E0/0 20.20.20.2 /24 ) all this for public ip add and my lan ip is 192.168.0.1/24.
could you let me know how to configure on router 1841 and ASA 5510. for router 1841 if you use private ip we can use nat but for all public ip add how can we do it?
Cisco Firewall :: 5510 - Load IOS And Configure From Another ASA?
May 2, 2011Have a new ASA 5510 connected to the laptop via console. I need to load the IOS and the configure from another ASA. I have tftp client on the laptop. Do I just need to set the inside IP to the same subnet as my laptop? Will I need a crossover cable?
View 1 Replies View RelatedCisco Firewall :: Unable To Configure NAT ASA 5510
Jun 15, 2011I have an ASA 5510 and I can not configure fine.
My problem is that I have 10 public address connected to ASA and each public address is redirectioned to an internal IP address.
An of these public address is the ip address of mi ASA.
how to configure and access-list and an NAT, the others I will configure.
interface Ethernet0/0
description Interface_WAN_World-Ttrends
speed 100
duplex full
nameif outside(code)
Cisco Firewall :: ASA 5510 - Configure HA Failover
Jun 8, 2013I have 2 ASA5510-SSL50-K9, can I configure HA Failover ?
View 7 Replies View RelatedCisco :: ASA 5510 - Configure Remote Access VPN To Network?
Sep 23, 2011I am trying to configure remote access VPN to my network, i have a Cisco ASA 5510 IOS 7.0(7).
I configured the VPN using ASDM 5.0.9 and below is the configuration received:
access-list 90 extended permit ip 192.xxx.xxx.0 255.255.255.0 192.xxx.xxx.248 255.255.255.248
access-list ClientVPN_splitTunnelAcl standard permit 192.xxx.xxx.0 255.255.255.0
ip local pool VPNIpPool 192.xxx.xxx.250-192.xxx.xxx.252 mask 255.255.255.0[code].....
Cisco Switching/Routing :: Configure Proxy On ASA 5510?
Jan 11, 2012Can i configure proxy on ASA 5510? i.e for internet use my user should be authenticate by ASA5510 and after successful authentication user should be allowed to access internet and futher is it possible to do bandwidth managment with ASA5510?
View 1 Replies View RelatedCisco Firewall :: 5510 Need To Configure Public IP In Few Devices
Apr 13, 2013I have a few devices that the manufacturer told us we have to set with a public IP (No Natting) We have Internet ->ASA5510-> Switch 3550 with 3 vlans. Up to now we have always use Natting to configure internet access to specific devices. I heard setting up a witch with one VLAN connected to the internet and all other internals is a bad idea. that was the only Idea we had.
View 3 Replies View RelatedCisco Firewall :: How To Configure ASA 5510 CSC Anti X Edition
Dec 13, 2011how to configure ASA 5510 anti X edition ? Can I have a link explaining the configuration step by step ?
View 2 Replies View RelatedCisco Firewall :: How To Configure NAT Port Range On ASA 5510
May 22, 2012i have a cisco asa 5510 and would like to add a NAT rule for a range of ports like 50000-59999
View 15 Replies View RelatedCisco Firewall :: Configure Internet Access - ASA 5510
Dec 9, 2012I have to configure a default-factory firewall (ASA 5510) in a simple scenário like this image represents:At this moment i have configured the interfaces as represented above and at this moment what i want is grant access from a LAN computer (10.10.0.0/24) to the internet.
Should i configure some acl? I read that all traffic from an interface with a superior security level to other interface is allowed, so since my inside interface has a security level of 100 and the outside 0, it should be possible access to internet from an inside computer?!
From all configurations and examples i have seen around, they all contemplate a fixed IP address from the ISP, but in my scenário i have a dynamic one. This fact matter for the configuration i want to do?
My firewall is running the software version 8.2(5).