Cisco WAN :: 887m-k9 / How To Forward The Ports

May 14, 2012

I've just bought a Cisco 887m-k9 and I am trying to forward the ports. I have a Polycom HDX H.323 device connected to it with a static IP of 10.10.10.5 (ethernet port 0).Previously I had a consumer grade Linksys router which worked fine (I simply entered ports into the GUI), but I couldn't hardcode LAN port speed so I bought this. I have the list of TCP and UDP ports which are forwarded using the following commands:
 
ip nat pool Polycom 10.10.10.5 10.10.10.5 netmask 255.255.255.0 type rotary
ip nat inside source static tcp 10.10.10.5 80 88.xxx.xxx.49 80 extendable
ip nat inside source static tcp 10.10.10.5 443 88.xxx.xxx.49 443 extendable
ip nat inside source static tcp 10.10.10.5 1300 88.xxx.xxx.49 1300 extendable

[code]....
 
Where 88.xx.xx.49 is my static IP, while 77.xx.xx.170 is my default gateway.

View 1 Replies


ADVERTISEMENT

DI 604 Router / Can't Forward Ports

Jan 8, 2012

I had a DI 604 router and I couldn't forward ports, someone told me to buy a new router because my modem (TM602G) doesn't have a built-in router and can't be blocking it so I bought a DIR 601 with wireless and I still have the problem.I don't have any firewalls.

View 19 Replies View Related

Windows 7 - Can't Forward Any Ports

Nov 15, 2012

Ive been having trouble opening any ports on my windows 7 desktop. I connect wirelessly to my D-link Dir 655. I've tried port forwarding single ports to a static ip, but that didnt work either. I currently have the dmz server enabled and still no ports are open according to this port checker Open Port Check Tool - Test Port Forwarding on Your Router I have the windows firewall service disabled, upnp is enabled on my computer and router, i have spi firewall disabled, qos is disabled, and endpoint tcp/udp filtering on endpoint independent.

View 3 Replies View Related

E1000 Won't Forward Ports

Feb 9, 2012

I'm trying to open ports 2934 and 2935 UDP on my Linksys E1000 router in order to play Falcon 4: Allied Force multiplayer but it's not working.I've correctly created a static IP, and logged in to the E1000's page. Under "Applications & Gaming", and then under "Port Range Forwarding" I entered values thus:

[code]....

View 1 Replies View Related

Cannot Forward Ports On SMCD3GN-RES

Jun 29, 2011

I cannot successfully forward ports on this router, I've tried a few things but I can only assume the firmware is bad. I've already looked around for a solution but everyone says they solved it by just getting a different router (which at the moment isn't an option).

View 3 Replies View Related

D-Link DIR-615 :: Can't Forward Ports

Nov 13, 2011

I can't get port forwarding to work, even when I turn off the Windows 7 firewall and AVG anti-virus software I'm running.  I entered the IP address of my laptop (with a DHCP reservation) and UDP and TCP port numbers, with Schedule set to Always and Inbound Filter set to Allow All.  That should be it, right?  However, when I check the ports using PFPortChecker, both the UDP and TCP ports are blocked.  I do have a Linksys wireless router daisy-chained to the D-Link router, but I'm not communicating on this computer through the Linksys router and the problem still occurs even when the other router is disconnected, so that doesn't appear to have anything to do with the problem.  I just updated to the latest firmware (3.13NA).

View 11 Replies View Related

Cisco Firewall :: ASA 8.2 Won't Pass Ports Through Forward NAT

Nov 15, 2011

We're trying to get a remote access setup for someone who needs to have access from offsite. To make things easy we set it up with a virtual machine running Windows 7 and RDP. Because the "other end" isn't our computer and we've had some difficulties with people using the Cisco VPN client successfully, we were just going to set up a machine as a RDP Gateway and forward the port through the firewall (WebVPN might be nice, but the plugins only do RDP through v5.x). I've tried this on 8.4-1 and after reinstalling the latest 8.2, and supposedly the NAT works and there is a firewall rule allowing access from the outside to the RD-GW server on HTTPS, but the ASA is still blocking those packets. I've looked at 4 howtos and followed them, trying from the console and from ADSM (and one trashed the whole setup, probably related to the reinstall of 8.2) - [code]

View 4 Replies View Related

Cisco WAN :: Ports Forward On 1802 Router?

Mar 26, 2012

I have a router 1802 with a several vlans with IP 192.168.x.0/24 for each vlan (x, it meaning 1, 2, 3, 4, etc.).Now I need that an IP address outside from my network (this IP it is always the same) to be access to on particular machine that is in a private network (192.168.3.0/24) through a several ports:

25 (TCP,UDP), 80 (TCP,UDP), 554 (TCP,UDP), 2000 (TCP,UDP), 10002 (TCP,UDP), 10000 (TCP,UDP), 3000 (TCP,UDP), 3041 (TCP,UDP)
 
How can I do it?
 
Outside PC ---------Internet ----MyRouter -----MyParticularPC
83.240.194.99                            193.136.80.1              192.168.3.1

View 2 Replies View Related

Cisco Firewall :: Forward Both TCP And UDP Ports 3074

Feb 25, 2013

I am trying to forward both TCP and UDP ports 3074 but it looks like I can only have either TCP/3074 or UDP/3074 open one at a time.  When I try to enter the UDP/3074 NAT statement, I get "ERROR: NAT unable to reserve ports". [code]

View 4 Replies View Related

Cisco Firewall :: Forward Some Ports On ASA 5505 8.2?

Nov 7, 2011

I need to forward some ports for remote desktop and remote outlook which I host on an internal server. I have looked all over the web and got close, but no hints on how to do it in the asa 8.2. there is an 8.3 guide, but it is just different enough to not work. I am new to this device and cli.

View 3 Replies View Related

Routers / Switches :: How To Forward Ports

Sep 17, 2011

how to forward ports using routers

View 2 Replies View Related

Linksys E3200 Can't Get Any Ports To Forward?

Sep 15, 2011

I went out and upgraded to the E3200 a week or so ago and since then i've been unable to forward any ports. I've tried pretty much everything I can think of: disabling Windows firewall, setting a static IP for my computer, setting a static IP for the router, enabling forwarding in both single and range menus, DMZ etc.Here is a screenshot of the port forwarding page just to confirm that i'm doing nothing wrong:In the above photo you will see that I set the computers static ip to x.1.2 and I later changed it to a value that was within DHCP range as listed on the status page of the router admin gui and it still didn't work.So, what I ask of you guys is if you can think of anything that I must be fundamentally doing wrong in order for this not to work. Could it be that i'm missing some possible drivers or network utilities on the computer i'm trying to forward ports too

View 1 Replies View Related

Cisco Routers :: Forward Range Of Ports With RV180W?

Oct 14, 2012

I am new to the RV180W. I am running the most recent firmware--version 1.0.1.9.
 
I am having trouble getting FTP to work with my QNAP NAS.
 
QNAP indicates that I should forward ports 55536-56559 to my NAS. I created a custom service to accomplish this, and then, under port forwarding, I selected the service and forwarded it to the private IP that corresponds with the NAS.
 
However, the port forwarding configuration only allows me to specify *ONE* internal port. With other routers I have always specified the same private port *RANGE* that corresponds with the public ports that I have opened up.

View 11 Replies View Related

Cisco Switching/Routing :: Configure 819 To Forward Ports For SQL And VNC?

Aug 15, 2012

I'm trying to forward ports for SQL and VNC using these commands in the CLI:
 
ip nat inside source static tcp 192.168.1.150 5900 interface GigabitEthernet0 5900
ip nat inside source static tcp 192.168.1.150 5800 interface GigabitEthernet0 5800
ip nat inside source static tcp 192.168.1.150 1433 interface GigabitEthernet0 1433
 
where 192.168.1.150 is my server (that hosts SQL server and that I want to be able to connect to remotely using VNC) and GigabitEthernet0 is my configured WAN interface.
 
When I try to connect from an external client I get the error:  "Failed to connect to server..." Is this a firewall issue?  How do I get round it?  The 819 is the only router/firewall in my network.

View 15 Replies View Related

Cisco Firewall :: 5505 - Forward Range Of Ports In 8.4?

Mar 11, 2011

I have an ASA 5505 running 8.4(1), and I'm configuring it with ASDM 6.4(1).  The outside interface is configured with a single static address.  I have a few services port forwarded sucessfully to three different servers on the inside network.
 
I need to make a media proxy on a SIP server available to the outside.  It requires a large range of forwarded UDP ports for the media channels.
 
I tried adding a network object NAT rule like the others I'm already using to forward HTTP and RDP.  I entered a range of ports for the real port and the mapped port using the syntax 60000-60999.  ASDM accepted it, but the NAT rule list displays "Any" in the service column.  When I apply the change, I get the following error:
 
nat (inside,outside) static interface service tcp 60000-60999 60000-60999
                                      ^
ERROR: % Invalid input detected at '^' marker.
 
How do I forward a large range of UDP ports from the outside interface to a single server on my inside network?  I'd like to use ASDM, but I can switch to the CLI if that works better.

View 3 Replies View Related

Port Forward Certain Ports For One Computer But Need UPnP For 2 Different Ps3

Dec 20, 2011

Need to port forward certain ports for one computer but need UPnP for 2 different ps3's.These are the parts I have. I have read that the GT704WGB does not have a true bridge mode. I don't want to bias anyone however. How to best use this equipment so that I can port forward ports on my laptop. There are also several laptops, desktop and phones on my network but the 2 ps3's and my laptop are what primarily concern me.

-Actiontec GT704WGB for Verizon DSL (Modem / Router Combo)
-Actiontec Support GT704WGB Wireless DSL Gateway for Verizon High Speed Internet access

Cisco Linksys wrt54gs v4 (Router) currently running Tomato firmware but I can flash dd-wrt back to it in a second.

View 4 Replies View Related

Belkin Routers :: N-F5D8236-4 V2 Can't Forward Ports?

Mar 28, 2013

I am attempting to forward port 25565 on my router, and having some trouble. I've set a static IP address as both 192.168.2.10 and 192.168.2.111, and attempted a dynamic IP address. The port forwarding page via 192.168.2.1 in the browser looks like this, with the Private IP Adress changed to whatever corresponding IP address I have set (checked with cmd /ipconfig).

After testing with multiple online port checking tools, the ports remain closed.

View 1 Replies View Related

Cisco Routers :: SRP527W - Forward Individual Ports From External IPs

Oct 27, 2011

A client is thinking of putting in a srp527w. they get assigned a static ip on the adsl interface (165.228.204.x), and then have been assigned another block(203.39.183.x/29).how can i have it so that i am able to forward individual ports from the external ip's, to selected internal ip's.

View 1 Replies View Related

Belkin Routers :: How To Forward Ports On N600 DB F9K1102v3

Apr 1, 2013

How do I forward ports on the N600 DB F9K1102v3? I have looked through everything. When I go to port forward, I enter the info and have it all down correctly, I click save and once it reloads it isn't there and the port isn't forward.

View 1 Replies View Related

Cisco Firewall :: ASA5505 / Forward Ports 9000 And 85 In Order To Monitor DVR From Outside?

Jan 28, 2013

i've a cisco asa5505 on adam 6.4 and a dvr i would like to forward the ports 9000 and 85 in order to monitor the dvr from outside?

View 1 Replies View Related

Cannot Forward Ports - Default Access Gateway Corrupt / Missing?

Nov 19, 2011

I need to forward several ports. however it has been complicated by a missing or corrupt default access gateway. [code] I am leaving for quite a while tonight, hoping to come back to a reply I am using a belkin router ( will get model number and stuff later - not sure if its needed ) * and wow cable and internet url...

View 8 Replies View Related

Linksys Wired Router :: AG10W - Forward Ports To Xbox?

Apr 13, 2013

I have a DSL modem, model AG10W. I can't seem to figure out how to forward ports to xbox. No one seems to have this router/modem. I got it from a company here in town. I don't know much about this type of stuff.

View 1 Replies View Related

Cisco WAN :: 887M-K9 Keeps Dropping Sync

Feb 7, 2013

I am having a problem with a Cisco 887M-K9 which keep dropping it sync.I have tried 2 different locations and both time it dropped sync after 15 or minutes where other routers are working fine. [code]

View 8 Replies View Related

Cisco WAN :: 887M 3G Modem - Link Flapping?

Nov 18, 2012

I've been handed an 887M with a PCEX-3G-HSPA-R6 card in it, and asked to get it working on the big, bad internet.I've managed to get it to the point that it at least *tries* to connect to the internet over the 3G network - but I've run into a problem I can;t, for all my google-fu, find an answer to.
 
Details - Router is an 887M/K9, running 15.1(1)T1. 3G SIM is confirmed OK (I've put it into my laptop, which has a cellular modem, and it works fine).
 
What happens is that the ce0 interface connects, and then immediately drops, and goes into reset mode. I'm stuffed if I know why - not sure if I need to do a firmware change to it, or soemthing else to the config.
 
Config (which is very basic - I just want it on the internet before I get fancy) is below
 
Router#sh run
Building configuration...
Current configuration : 1504 bytes
!
! Last configuration change at 03:48:36 UTC Tue Nov 20 2012
!
version 15.1

[code]....
 
It *seems* to come up, but immediately drops out, and I can't figure out why.

View 2 Replies View Related

Cisco Switching/Routing :: Update Modem Firmware On 887M

Mar 25, 2012

I've recently tried to update the modem firmware on an 887M that is actually using an Annex M service and after rebooting to kick in the new modem firmware, the router loses sync. I've tried this with various other 877, 877M, 887 and 887Ms on normal Annex A services with no problems, but this Annex M service doesn't like it at all.

View 2 Replies View Related

Home Network :: Set A Rule In Router 1 To Forward All Ports To Router 2?

Jul 13, 2012

Router 1
Cisco EPC2420
192.168.1.1Connects to ISP via F-connectorConnects to Router 2
Router 2
Asus DSL_N55U
192.168.1.2Connects to 192.168.1.12(Linux Server)

So I bought router 2 but since it doesn't have an F-connector input I need to keep router 1 in the infrastructure so I can connect to the internet.The port forwarding on router 1 is a limited list so I can only add so many rules and would rather have my router 2 do this as it alot better but i cannot seem to get it to work.So I set a rule in router 1 to forward all ports to router 2 and then setup the port forwarding in router 2 to send port 22 to my linux box but it didnt work.

View 1 Replies View Related

Cisco Switching/Routing :: 887m - Unable To Route Data Between Primary And Secondary IP Networks

Jan 7, 2013

We an 887m router in our office with an unmanaged switch. We have two networks, 192.168.0.x and 192.168.11.x connected to router on the same interface (192.168.11.253 is a secondary ip) but I can seem to be able to route packets from one network to the other. Internet traffic is fine from both networks. I can't see what I'm doing wrong here. I can ping the 192.168.11.253 (router) from the 192.168.0 network but nothing beyond that.
 
I tried this at home with no other config and its the same. Is this by design?

View 4 Replies View Related

Cisco Firewall :: ASA 5505 / Use The Ethernet Ports As Pure Physical Layer 3 Ports

Jun 9, 2013

We have an ASA 5505. 5505 comes with two default vlans 1&2 with each of them marked as inside & outside respectively.My query is , if i do not want to use vlans on 5505 and only want to use the Ethernet ports as pure physical layer 3 ports, is it possible?i.e. i want to assign a layer 3 ip address on eth0/0 and eth0/1 and make them as the inside & outside interfaces rather than vlans. is it possible to do away with vlans in 5505 & will it work otherwise?

View 3 Replies View Related

Cisco Firewall :: ASA5555-X - Spare Ports Into Access Ports?

May 14, 2013

Is there a way to associate spare firewall ports with another port that is being used..For example...int gi 0/2 is being used currently for my web dmz. Its ip is 192.168.10.1..Is there a way for me to associate gi 0/3 with the same layer 2 as gi 0/2 ?
 
In my webdmz I use 2 ACE 4710 proxys in FT mode. I used a layer 2 switch to connect firewall and proxys together.
 
I would like to eliminate this switch if possible..and connect both 4710's (layer 2) direct to firewall.If I could make gi0/2 - 4 part of the same vlan, then I would be good to go.

View 2 Replies View Related

Cisco WAN :: How Many Of 881 Switch Interface Ports Can Be Used As Router Ports

Aug 7, 2011

How many of the 881 switch interface ports can be used as router ports, have used the 877 etc where i can use 2 but need a low cost router that supports 3 for routing. (needs to be physical ports)

View 2 Replies View Related

Cisco :: Changing Link Ports To Access Ports In LMS 4.1?

Feb 2, 2012

One of techs accidentally connected two access ports from different switches together.  Since then, LMS is alerting them as being Link ports down.  I tried to default the config and set them to access ports without any success.  what I should do in LMS to recognize them as access ports? 

View 2 Replies View Related

Cisco WAN :: Port Forward To With 837

Jul 11, 2011

My cisco 837 is connected to a ADSL Router by Ethernet Cable. I have forwarded the telnet port from my ADSL Router to the LAN IP of the Cisco Router so that i can connect to it Remotely but it is not working. I am able to telnet internally but from Internet it is not working. I am not using Cisco Router for ADSL Connectivity.

View 5 Replies View Related

Cisco WAN :: 3640 IP NAT Forward 443 ASA VPN

Apr 1, 2013

when dealing with NATing with port fowarding from a specific IP range on the outside to a inside IP address. Here is what I have now:Cisco 3640 WAN Router: [code]
 
which ofcouurse did not work and ASA did not respond to 443 on either Anyconnect or HTTPS. Nothing showing in"show ip nat translations" for the incoming traffic from “ip nat outside source static tcp 15.236.10.0 192.168.4.2” and “ip nat inside source static tcp 192.168.4.2 15.236.10.0”

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved