I'm running a cisco 891 with ios Version 15.2(4)M3 ,now I have a dialer 0 interface with fast0 and 1 as well, all is working fine.now I just read about the new sh int 'INT' history feature but when I do it I get nothing.. not a graph or anything I get just nothing as if I just hit enter.anything I need to do to enable the feature?,if I do a sho proc cpu history that works just fine but not the sh int XYZ history commands
We are using the ASA 5520 as Firewall and VPN gateway for remote access by employees and vendors. Is there a way to view a history of VPN user logins? We used to have (or we still have but no longer using it) th CVPN 3005. This device keeps log files of all activities. I miss having this capability in the ASA 5520.
Our enterprise uses a VPN Concentrator 3000 for our VPN access. Is there a way to view a log history of what user connected to VPN and what IP address they were assigned? It would be for 2 days ago which was over the weekend.
I want to do something with IP SLA and started by estabilishing a baseline.
I'm trying to check history on an ASR. I tested same config on a 3845 and was forgetting the "history filter all". After this I could see history table on 3845 but still history is empty on the ASR1006. The operation started because I can see information with "show ip sla statistics".
know if i missed something or maybe this is not supported in ASR1006?
re-ld-tcc-02_ASR1006#show vers Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.2(1)S2, RELEASE SOFTWARE (fc1)
I have been appointed to monitor an internet networking consist of 4 computers.
1. To block some websites for all 4 computers. Example, maybe if I want to block YouTube - Broadcast Yourself. or any website. This is actually to prevent users to access any adult site.I dont want to block internet entirely. But just to block some website only.
2. To have a report for internet URL for each computer. Not a bandwidth or traffic report. I dont need that. What I want is a list of URL that the user have surf in the internet.
How can i monitor users web and URL history with monitoring utilities?i am using solarwinds orion but i don't know how can i monitor web and URL histories.does this software have this ability or not?
Privacy in the web, I have a new laptop and I want to know if my verizon router will store my browsing history if I use Incognito mode or privacy mode? Because I don't need people seeing what I was doing.
I was wondering if the ASA 5520 Firewall had the ability to view web traffic or site surfing or does this only work if I have a logging server configured for the ASA to log to? I don't use the ASA much since I'm the database administrator for my company but from time to time I'm asked when nobody else is available. I just checked the ASDM & see that the buffer clears after so many lines & I don't believe we've got a logging server.
I am doing troubleshooting of the wireless connection problem.
<Environment>・WLC 7.0.116.0 is used together with WCS and MSE. ・Lightweight APs (3502i) are connected to the controller. ・It attests a radio client by WPA2-PSK.
The status of the client when not connected with wireless LAN was frequently displayed as follows by Location History.
State1:802.11 State : ProbingIP Address : blankMAC Address : blankAuthenticated : No SSID : blank State2:802.11 State : AssociatedIP Address : 0.0.0.0 (In practice, Static IP is set up.)MAC Address : XX:XX:XX:XX:XX:XX (expected)Authenticated : No SSID : XXXX (expected)
What is the cause of problem which is assumed in each state of State1 and State2?
How to see the ipsec vpn client users login history, they are authenticating to the local AAA, not to active directory. I am able to see current login session. by going to monitoring vpn statistics sessions this shows me current sessions but I would like to see for example logins for vpn client for the last month.
I am currently using ASDM v6.4 and would like to enable the historic metrics feature to view/produce graphs/tables for interface using the Last 5 days, every 2 hours option. how this will impact performance and storage space on the device?
I'm both concerned and pissed off that my creepy housemate might've used our network to invade my privacy, steal expensive multimedia & valuable personal info, and may have continued access to my computers. I have a Win7Home laptop and a Win7Prof desktop. Both have a Windows password.I was attempting to back-up files from my laptop to my desktop ~2 weeks ago, so I created a Shared Folder and put files in there. After the copying was done, while I was moving the folders from the Shared Folder to a private folder on my desktop computer, there was an error message for one of the folders, saying it was open in another window... this was strange, since it definitely hadn't been opened within weeks by me. But it resolved immediately (like they got alerted). And of all the folders, it's one which my stalker roommate would def be interested in.
Also, I recently noticed that there are Remote Desktop Connection icons on both my computers (with "Allow" checked on laptop only). They were created 49 seconds apart, that NEXT morning. They reside in the same parent folder as where the shared folder resides (Documents folder on laptop and a Partition on the desktop). It is possible that I created the RDCs by accident while amateurly trying to network the my PCs, or could they be offspring from a trojan/DLL file which was placed in the Shared folder by my creepy roommate...? As "admin" over our router, would he have been alerted to the fact that I shared a folder? I'd enabled "Home" network and discovery for my computers. Could he access other NONshared folders if my computer was visible? Can router admins view a window that can constantly track network computer activity?
I matched the traffic statistics on one of my Cisco ASA site-site tunnels with the OID:1.3.6.1.4.1.9.9.171.1.4.3.1.1.25.4142 (cipSecTunHistInOctets). I was real proud of myself for a few days until I checked the history and found the OID wasnt working.After some troubleshooting I found that the last four digits (4142 in this case) change whenever the tunnel drops and re-establishes itself. Any way to collect tunnel utilization history on an ASA with SNMP? Is there a different OID I can use thats based on the endpoint IP?
System returned to ROM by reloadSystem restarted at 00:36:52 UTC Sat Dec 10 2011System image file is "bootflash:cat4000-i9s-mz.122-25.EWA14.bin" cisco WS-C4506 (MPC8245) processor (revision 10) with 262144K bytes of memory.MPC8245 CPU at 266Mhz, Supervisor II+Last reset from Reload1 Virtual Ethernet interface144 FastEthernet interfaces2 Gigabit Ethernet interfaces511K bytes of non-volatile configuration memory.Configuration register is 0x2102
I'm using wireless iternet supplied by my roomate. They have the router and service, and have given me code for use on my computer. How do I hide my web history in a way that at least they don't know what it is if seen?
For some reason I am unable to retain the system message logging and config archive references after a reboot of the router. I need to be able track config changes and retain the ability for the customer to recover the original config should they destroy the config through any misguided fiddling on their part. There is no remote management and these router need to be recoverable. I know this used to configured by default on earlier routers as I've checked on teh ones we have, but checking through the configuration has not worked and i have everything configured the same but system messages are still lost on reboot. Im using Cisco 3845 running IPbase 12.4(3) and the config i have is shown below.
I am attempting to send net and IPTV multicast to an Entone STB. This STB has some OTT features such as Vudu that need internet access. The DHCP address that we receive from our ISP strictly sends multicast streams to the STB.The first challenge is allowing DHCP options to pass through to the STB.Then I need to figure out a way to pass both the net and multicast to the STB.
I have cisco 3560G with C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(53)SE1 Image. I want to configure it for EEM feature so that when my Gig 0/7 port goes on it will automatically shutdown the port Gig 0/1.
I'm a bit confused about new NAT functionality in Ver 8.4(2). I've gone through all the documentation as well as different blogs but still not clear about the various things.One of these is NAT-CONTROL. I understand that this has now been removed. Does this means that traffic traversing the ASA doesn't need any NAT'ing commands unless specifically required by the administrator? In other words by default traffic is allowed through the firewall without any NAT'ing.
My Second Query
I've ASA5520 running ver 8.4(2). For inside interface, I've created 13 x sub-interfaces under Gi0/1. All have same security level i.e. 100. What I want to achieve is that:Traffic from these sub-interfaces should be NATTed to outside interface when going to internetBut, intra sub-interface traffic should be allowed without NAT'ing. I'm using RFC1918 on both sides i.e. source / destination The first point is not a problem it's working, however. I'm struggling with the second point. On ver 8.2, it wasn't a problem, I used NAT 0 with access-list permitting RFC1918 addresses as source and destination.