Cisco WAN :: Inactive Ports On 4507R-2 Switch?

Nov 14, 2012

I'm having issues getting the ports g3/5 and g4/5 from inactive to notconnect.
 
I have tried the hw-module uplink select all in the global configuratio, but it's not working, getting a : % Invalid input detected at '^' marker. Message every time.
  
This what I have:
 
Power consumed by backplane : 40 Watts
Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
1    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE152101QK

[Code].....

View 2 Replies


ADVERTISEMENT

Cisco :: Catalyst 3560s / 3750s - EEM And TCL Script To Disable Inactive Ports

May 4, 2013

I've browsed around to the other  support strings to make sure I didn't miss anything, but I can't seem to  get this to work.  I have the latest sl_suspend_ports.tcl and  tm_suspend_ports.tcl created by Joseph Clarke from strings that verified they worked as planned.   Here are the commands I issued to register the scripts -
 
 
Directory of flash:/policies/ 
9  -rwx        3101   May 3 2013 07:58:03 +00:00  sl_suspend_ports.tcl
10  -rwx        4669   May 3 2013 07:58:44 +00:00  tm_suspend_ports.tcl
 conf t
event manager directory user policy flash:/policies
event manager policy sl_suspend_ports.tcl
event manager environment suspend_ports_days 1

[code].....
 
It doesn't appear to work though.  Essentially, we have a  need to make sure all computers are always on and all ports not active  for >24 hours to be shutdown and moved to a designated vlan (I added  the 'lappend' statement to the script to specify the additional command of assigning the vlan) I'm running 12.2(55)SE7 on Catalyst 3560s and 3750sIs there a way to manually run the script?  Did I miss anything in the configuration?

View 19 Replies View Related

Linksys Wired Router :: BEFSR81 V2 Ports Become Inactive - Upgraded To Latest Firmware?

Jan 5, 2012

I have the Linksys BEFSR V2 router and at least once a day some or one of the ports become inactive and have to unplug the router and plug it back in to reset. I have ungraded to the latest firmware but this is still happening on a daily basis.

View 3 Replies View Related

Linksys Wired Router :: BEFSR81 V2 Ports Become Inactive / Upgrade File Pattern Error?

Jan 2, 2012

I have the BEFSR81 V2 and every day at least one of the ports become inactive and the router has to be unplugged and plugged back in to reset the ports. I was going to upgrade the firmware from version 2.44.2 to the one on the site 2.45.10 but when it is downloading I get a message at the end upgrade file pattern error. There is a problem with the router that the ports go out or will the firmware update hopefully correct that issue and how to I get the firmware to update

View 2 Replies View Related

Cisco Switching/Routing :: Catalyst 4507R+E With WS-X4748 Blade - Ports Not Working

Mar 28, 2011

I have a Cisco Catalyst 4507R+E  (with Sup7-E) and two blades; one WS-X4748-RJ45V+E and one WS-X4648-RJ45-E.
 
When I connect a device to a port on the WS-X4748-RJ45V+E blade the port will not come up, show interface shows the status as "notconnect". When I connect the same device to the WS-X4648-RJ45-E blade the interface comes up.
 
The WS-X4748-RJ45V+E blade seems to have initialised okay, it appears in the output of "show module" as OK.
 
I get exactly the same effect on a second, identically configured Catalyst 4507R+E.
 
The software version is IOS XE 3.1.0SG, which according to the release notes supports the WS-X4748-RJ45V+E blade

View 2 Replies View Related

Cisco :: LMS Cannot Display Image Switch 4507R+E

Aug 23, 2011

I installed LMS 4.0 succesfully, but  when i go to topology, can view all network, but the "AswitchA" Core 4507R+E be displayed as "?"

And it can not display this "AswitchA" into CISCO VIEW, display this messaje :
 
"Cannot find applicable device package for ... This error could be due to one of the following:

- The device package for this device type is not installed.
- Device support for this device type is not available.
- You are trying to open a component inside a device.

To correct the problem, either install a device package for the device type, or open the parent device to manage the component."

View 2 Replies View Related

Cisco Switching/Routing :: 4507R Switch SUP Cards

Apr 19, 2013

I have two types of 4507 switches

1. 4507R
2. 4507R-E
 
and SUP-V and SUP-6-E.So I want to test both SUP cards on both switches which SUP card support which switch?

View 1 Replies View Related

Cisco WAN :: Core Switch 4507R Suddenly Restarted

Apr 20, 2012

My CORE Switch 4507R Suddenly restarted (Powe is good) , and gets the business down for 30 Mts,my boss came to me and asks why it has restarted , what is the root cause of this restart, i dont have any syslog or NMS enabled in my  network to be informed

View 6 Replies View Related

Cisco WAN :: DHCP Configuration On Core Switch 4507R

Jul 9, 2011

DHCP configuration on CISCO core switch 4507R switch.With one vlan and multipul vlan both configuration using any ip address range.

View 3 Replies View Related

Cisco Switching/Routing :: Secon SUP Engine On 4507R Switch?

Mar 8, 2012

I need to add another SUP engine on Cat 4507R switch, with a new one. I have old SUP engine running in this switch. Sometime this switch is reloaded without any reason. So we want to add another sup engine for redundancy. What is the procedure to do this & also how much outage time would it cause? Which sup engine will be run as primary and which one should be redundancy?
 
SWITCH-4507#sh ver
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version
12.2(25)EWA8, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 24-Jan-07 15:28 by pwade

[code]....

View 4 Replies View Related

Cisco Switching/Routing :: 4507R-E How To Implement Same Configuration On New Switch

Feb 26, 2013

I'm in the process of upgrading my 4507R core to a new 4507R-E. The old switch has Sup IV engines (WS-X4515) running IOS 12.2(40)SG and the new switch has Sup 6L-E engines running 15.1(2)SG. I'm trying to "move" my configuration from the old switch to the new. Below shows the commands configured in the old switch. I'm trying to determine how to implement the same configuration on the new switch since these commands are no longer available.

View 2 Replies View Related

Cisco Switching/Routing :: 4507R+E Switch / SVI Interface Not Pinging?

Aug 4, 2012

last day i went to one client for the installation of C(WS-C4507R+E)
 
current ios :cat4500e-ipbase-mz.122-53.SG2.bin
 
there is only one sup engine installed and  redundant slot is empty.
 
I installed one ethernet module in the slot 6 and it get detected working fine. I also want to install one fiber module but that module is only supported by 12.2 54 sg or later ios version.so i need an ios upgrade.
 
For the ios upgrade I decide to do it through svi interface For that i igive an ip address to vlan 1 (192.168.1.2) and plug cable in gigabit 6/1 and added that port into valn 1.
 
my laptop's ip is 192.168.1.1 @ this point i faced a rare problem the PING IS NOT WORKING.(switch is directly connected to my laptop).
 
Then i create another VLAN (2) and add that port into vlan 2 still ping is not getting.last thing i tried is that making that gigabit port into a routed port and result is same.

View 4 Replies View Related

Cisco Switching/Routing :: Blades On Switch 4507R Keeps Blocked After IOS Downgrade

Jan 4, 2011

We made an IOS doBlades on switch 4507R keep block after an IOS downgradewngrade. Before to do it, the equipment comes with blades 1, 2, 3, 4 and we insert "X4418" and "X4548" on blades 5 and 6.[code]
 
After we made an IOS downgrade to a cisco 4507R from "cat4500e-ipbasek9-mz.122-54.SG.bin" to "cat4500e-entservicesk9-mz.122-53.SG2.bin" (comes with a redundancy supervisor blade WS-X45-SUP6L-E) the standby supervisor keep disable.We tried with the command "Switch(config)#boot system flash cat4500e-entservicesk9-mz.122-53.SG2.bin" then save configuration and "reload" comand but the switch runs with the "...54.SG.bin" IOS.
 
We erase the configuration with the command "erase/all non-default", before to apply the reload command insert the "entservicesk9-mz. 122- 53. SG2.bin" using the tftp command.The standby supervisory remains on disable state but the active supervisory runs with the desire IOS. In order to downgrade the IOS to the standby supervisory the active supervisore was removed temporarely (previously the switch was off) to make the standby as active, after that made the same procedure with command "erase/all non-default", "copy tftp://(....122-53.SG2.bin), and "reload" command.
 
The switch was off and re-insert the active supervisory and turn on the switch, after we made the procedure the blade "WS-X4548-RJ45" marks a fault as follows: [code]
 
The blades were reset but don't have access to them.

View 1 Replies View Related

Cisco Switching/Routing :: Effects Of SPAN Port Configuration On 4507R+E Switch?

Oct 29, 2011

I read quite a few documents on configuring SPAN on a cisco switch but none of them mention any limitations or any kind of CPU load it can have on a switch. I need to configure this on one of our switches and would like to know if there are any implications related to SPAN.

View 5 Replies View Related

Cisco Switching/Routing :: Can Put Module On 4507R Switch Running On Live Production

May 2, 2012

Can we put a module on a 4507R switch running on a live production? The module will come from a 4506 switch.

View 8 Replies View Related

Cisco Switching/Routing :: 4507R-E Switch - How To Add Extra 10 Gbps Fiber Link

Sep 30, 2012

We are using CISCO 4507R-E switch as our core/distribution switch. Out of the 7 available slots, 3 are currently being used. Descriptions is as follows:

       Slot 1: 6 Port Fiber Line Card
 
       Slot 2: 6 Port Fiber Line Card
 
       Slot 3: Supervisor Engine
 
       Slot 4: Empty
 
       Slot 5: 48 Port Copper Line Card
 
       Slot 6: Empty
 
       Slot 7: Empty
 
We want to add extra 10 Gbps fiber links (approximately 12) using slot 6 and 7.

View 6 Replies View Related

Cisco Switching/Routing :: 4507R-E / No ARP Virus - Switch Can't Response Ping And Telnet

Apr 10, 2012

We got a switch issue here for 4507R-E with two sup6l-e supervisor running sso redudant. and we found that sometimes client can't ping through the local vlan ip add on the switch , can't logon the cli by telnet too. In the direct connected network device such as access switch and ASA , can't ping or telnet the 4507R too. when we made a forceswitch to sso standby supervisor from console , the problem solve and everything get fine . after that, we switch angin back to the origin supervisor , fine too.
 
before we made the supervisor forceswitch , we had check the system cpu usage is 15 - 20 % from console . also we had creat a new vlan 200,  attach the notebook to 4507's vlan 200 port , the notebook can't ping or telnet the vlan 200 ip interface too.

View 1 Replies View Related

Cisco WAN :: How Many Of 881 Switch Interface Ports Can Be Used As Router Ports

Aug 7, 2011

How many of the 881 switch interface ports can be used as router ports, have used the 877 etc where i can use 2 but need a low cost router that supports 3 for routing. (needs to be physical ports)

View 2 Replies View Related

Cisco Switching/Routing :: 4507R+E - Access ROMmon Mode Of Crushed SUP When Switch Running Through Second One

Oct 21, 2012

I have one cisco 4507R+E.My question is if the IOS of the acive SUP crushed and the switch is running through it's second SUP then how to restore the IOS of the first SUP.Also how to access the ROMON mode of the crushed SUP when switch is running through second SUP.

View 1 Replies View Related

Cisco WAN :: 2811 Router Become Inactive Once Or Twice In A Week

Mar 1, 2012

I have one cisco 2811 router.One cisco 4503 core switch.And one cyberoam UTM.VLAN 16 on router connected to VLAN 16 of core switch.VLAN 3 on router Connected to UTM.VLAN 2 on router connected with Internet Leased line. And one MPLS VPN terminated at Fast Ethernet port.All ports are fast Ethernet Port on router and all Gigabit Ethernet Ports on Core Switch.Now coming to the point, whenever the router becoming inactive the fast Ethernet ports are working but switch module ports not working. and that point we have to reboot the router.

View 2 Replies View Related

Cisco Wireless :: WLC 7.0.220 / NMSP Status Is Inactive

Dec 20, 2011

I am running the following
 
WLC: 7.0.220
MSE: 7.0.220
NCS:  1.0.2.29
 
NCS shows Controller is not reachable from MSE. I am able to ping to and from the Controller and MSE.Sychronization service is showing everything being synchronize. Removed and MSE from NCS and add it back in several times.

View 8 Replies View Related

Cisco WAN :: 3825 - Way To Clear Inactive IDBs

Jun 15, 2011

Is possible clean inactive IDBs?I have a Cisco 3825 that support up to 1200 IDB and now is using 1102, but 614 is inactive.
 
[code]....

View 4 Replies View Related

Cisco WAN :: Gig0 / 2 Port Inactive / Down - Cat2960

Jun 22, 2011

Got a mind-boggling issue with a Gig0/2 port on Cat2960 48TTL, the port seens dud. I cant enable it, its not shutdown either. However, when I restart the switch, on CNA, i can see the interface flash amber (as all ports do when restarted) and goes grey. The cable is ok and works on other interfaces on the same switch. Without having to buy a whole new equipment, is there a way I can test wether the port is faulty, as in physically, or I have missed something.

View 7 Replies View Related

Cannot Map Network Drive (Reservation Inactive)

Apr 14, 2012

Two people went on a business trip with their laptop and when they came back they could no longer access the data server. Cannot map the network drive either.

1. Every desktop PC in office can see and access the data server fine.

2. We have a DHCP and DNS server (on one PC; Windows Server 2008), but we had to shut down the services because internet and email didn't work when the DHCP and DNS server service was on. I am confident that this is due to the recent shutdown of the company e-mail server (now outsourced) and the server settings needs to be reconfigured. The described symptom persists even when the DNS server service is stopped.

3. Upon taking a closer look at the DHCP reservation settings. The reservation status indicates as "Reservation (inactive)". I don't know the MAC address of the device, so I have no idea if the values are correct. Tried rebooting the server, delete and recreate the reservation, reboot router; no cigar.

4. Using the coworker's laptop, the data server is shown in the "Other devices" section even with the DHCP sever disabled, but shows error that it cannot access it.

5. All users, with the exception of the data server, have dynamic IPs assigned.

6. DHCP, DNS server is set to 10.10.10.2, Router is set to 10.10.1, Data server is set to 10.10.10.175. 10.10.10.2 is also an accounting server which can be accessed by everyone even in the midst of this mess.

View 1 Replies View Related

Using SFP+ Uplink Ports On A Switch?

Mar 19, 2013

I have a question regarding uplink ports on a switch. Specifically the SFP+ variety. Could these uplink ports be used to connect directly to a fileserver? To be more specific, would the uplink port on the HP 3800 Switches connect directly to a file server that has the SFP+ card installed?

View 6 Replies View Related

Cisco Firewall :: ASA 5505 Disconnecting Inactive TCP Session?

Apr 15, 2013

My company has a DCS network that was previously segregated with a layer 3 switch and a handful of access lists.  However, there came this big push to segregate all DCS networks with Firewalls, so I purchased a 5505 and duplicated my simple access lists on the firewall and everything worked.  There is no NAT, just explicitly permitted traffic out and explicitly permitted traffic in.  However, there are some applications that connect and work fine for a few hours, then disconnect and the user must exit out of the application and go back into it, then it starts working again.  Previously with the Layer 3 Switch/access lists, this never happened.  Since I put the firewall in place, it has happened 3 to 4 times a day every day for the last week.

View 4 Replies View Related

Cisco Switching/Routing :: Inactive Interface On The WS-C4507R+E?

Aug 31, 2012

I have a switch WS-C4507R + E, added two SFP SFP-10GBase-SR, and they stayed with inactive status, activate these interfaces in 10Gb. 
 
SWC-DC01#sh interfaces status module 4
Port      Name               Status       Vlan       Duplex  Speed Type
Te4/1                        connected    trunk        full a-1000 1000BaseBX10-U
Te4/2                        notconnect   1              full   auto No XCVR
Te4/3                        inactive        220           full   auto 10GBase-SR
Te4/4                        inactive        220           full   auto 10GBase-SR

[code]......

View 1 Replies View Related

Cisco WAN :: 2811 - Routing The Switch Ports

Mar 10, 2011

I have a 2811 router with a 9 port switch module and a four port ISDN module.  The ISDN Module is our connection to the outside world.  FE 0/0 and FE 0/1 are connected to separate networks and both route our the ISDN connections.We are getting a new satcom system that consists of a modem, antenna control unit (ACU), and an antenna.  The ACU and the modem communicate accross Ethernet and are generally hooked to a switch.  Anything computer hooked to the switch can simply use the modem IP as it's gateway and be surfing the Internet without much hassle (just need the correct DNS addresses).I'd like the networks behind FE 0/0 and FE 0/1 to be able to route out the satellite modem for their Internet connection -- when the satellite is available.  Is it possible to put two switch ports in a VLAN (one for the modem and one for the ACU), give the VLAN an IP in the same subnet as the modem and ACU, and then tell the router to route traffic out the modem IP address ?

View 4 Replies View Related

Cisco Switching/Routing :: SG-300 - Switch With 24 SFP Ports

Nov 9, 2011

I like the SG-300 switches for SMB and I'd like use them in our network. Design is quite simple just 6 SG-300 switches connected to one central switch using SFP ports (using 2 port trunks) so I need 12 SFP ports and this is my question. Could you recomend me switch with more then 12 SFP ports from Cisco for this SMB network ? I don't know all the Cisco product lines and I can't find it.

View 2 Replies View Related

Components Under Routing Or Switch Ports?

May 23, 2011

Basically what is the difference. I'm looking at a breakdown of all the components connected to my switches I noticed half of them about are listing their port all the same as GI1/0/1 (routing port?). Then the rest are all different ports FA1/0/assigned# or FA2/0/assigned# (switch ports?).which are routing or switch ports and why certain ones are under each. It doesnt seem to matter which component it is (computer or printer) because some of each are under routing or switch ports.

View 1 Replies View Related

IP Addresses Bound To Switch Ports?

Mar 25, 2012

My university provides one Ethernet port per student in dorm rooms. They assign IP addresses based on which port you connect to and forbid multiple computers connected to the one port using a hub or switch.DHCP leases are 24 hours long, but you can switch out 10 different devices with different MAC addresses and keep getting the same IP. How does this work? Do they just figure that if you're using a hub connecting multiple stations to the one port that they don't care if there's a conflict?

View 3 Replies View Related

Cisco Switching/Routing :: Interface Showing Inactive On Cat4500?

Jan 22, 2013

We have 3 Cat 4500 switches on three floors teh 3rd floor switch connects to the 2nd and 4th floor switches ,but we are receiving an alert from monitoring tool that " Interface(314) Backup-1Gb-Ring is Down at least 2 min on Switch: SOM500-4510-3FL  the following output from "sh int status module 1 " shows the int 1/3 and 1/4 are 'inactive'local IT guy said If the status is inactive,the ports cannot be used and might lost the capability when he added 48-port blade into the 10th slot.

2nd Floor
Port      Name               Status       Vlan       Duplex  Speed TypeTe1/1     SOM500-Core1       connected    trunk        full    10G 10GBase-LRMTe1/2     SOM500-Core1       connected    trunk        full    10G 10GBase-LRMGi1/3     Backup-1Gb-Ring    notconnect   1            full   1000 1000BaseSXGi1/4     Backup-1Gb-Ring    connected    trunk        full   1000 1000BaseSX
3rd FloorPort      Name               Status       Vlan       Duplex  Speed TypeTe1/1     SOM500-Core1       connected    trunk        full    10G 10GBase-LRMTe1/2     SOM500-Core1       connected    trunk        full    10G 10GBase-LRMGi1/3     Backup-1Gb-Ring    inactive     1            full   1000 1000BaseSXGi1/4     Backup-1Gb-Ring    inactive     1            full   1000

[code]....

View 6 Replies View Related

Cisco :: 3750 Switch - Connectivity Lost For Some Ports?

Mar 8, 2013

In my 3750 stack switch there are more than 10 L3 vlans currently in use.In that only one vlan for example vlan 11 (we given up link directly to the nodes connected to that ports which is in vlan 11)losing connectivity for sometime and again connectivity restored.Except Vlan 11 all other vlans are working fine. When we troubleshooted the issue some of the ip's able to ping and some not able to ping. checked the interface status of that ports (no crc and input errors) and port is in up status only.we also checked cpu utlilisation ,device uptime, all are no issues found. am sharing my sw basic config and one interface status at the time of issue.But only one port learning more than 50 Mac-Addresses dynamically.and am learning mac address violation in another port which is port security and storm control enabled on that port..Its seems to be any attack or something else????

interface GigabitEthernet1/0/20
--More-- description
switchport access vlan 11
switchport mode access
spanning-tree portfast
logs:
Mar 8 05:58:25.848 IST: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0026.0a18.8218 on port GigabitEthernet1/0/16.
Mar 8 05:59:25.862 IST: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0026.0a18.8218 on port GigabitEthernet1/0/16.

AT the time of issue interface status:

sh int gi2/0/14
GigabitEthernet2/0/14 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 0026.ca46.5c8e (bia 0026.ca46.5c8e)
Description:
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,[code]......

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved