Cisco WAN :: Number Of Users Supported On ISRs G2 880
Apr 16, 2013
This is a feature that I have researched for by looking at ISRs G2 data sheets and cisco.com website.The number of users that can be supported or the recommended number of users per router chassis/model is not mentioned anywhere.However this is mentioned in the Cisco 880 ISR data sheet. What are the number of users that can be supported or the recommended number of users on Cisco 1900/2900/3900 ISRs?
View 4 Replies
ADVERTISEMENT
Aug 1, 2012
I cant find the maximum number of vrf supported on a 3925E ?
View 1 Replies
View Related
Oct 18, 2011
how many SSL VPN Users are supported in Cisco1921-SEC/K9 routers? Or do i need to separately purchase SSL-VPN User license- FL-SSLVPN25-K9 (Cisco SSLVPN Feature License-25 Users) separately?
My client requires 25 Users SSL VPN.
View 4 Replies
View Related
Sep 9, 2010
I'm having some weird issues with our 3560 that's connected to an MPLS line. The speed of the port plugged into the providers equipment is 100Mb, but we're only allocated 10Mb of bandwidth from them, I tried to police our traffic out of the port using srr-queue bandwidth limit 10, however when I do that I get some really weird bandwidth results.
Using iperf I've run bandwidth tests with srr-queue bandwidth limit enabled and with it disabled, when it's disabled I get the full 10Mb as expected, however once I enable it I'm lucky to get 5Mb, and while the test is running connectivity between sites is almost useless (which is not the case if I disabled bandwidth limit). Is there anything special I should be doing when I have this enabled? I also have priority-queue out enabled with only one dscp marking placed in queue 1, with very little traffic hitting that queue, but regardless of what I do I can't get the expected bandwidth with the bandwidth limit command, even if I place my iperf traffic in that priority queue.
View 3 Replies
View Related
Nov 16, 2011
My clients switch is running out of Spanning-Tree instances (c3560 only supports 128 instances). I know that running RSTP with VSTP can mitigate this that all instances over 128 will be handeled by RSTP, but before I implement this are there any other thoughts out there on how to mitigate this. Would MSTP be able to handle more STP instances or MISTP perhaps?
View 3 Replies
View Related
Aug 7, 2012
what is the maximum number of AAA clients supported by a single ACS5.3 instance?
View 1 Replies
View Related
May 16, 2012
I have an E4200 v1 wireless router, F/W 1.0.04.
Article ID 4041 [URL] says I can have up to 10 Internet Access Policies but the web based GUI has a pull down with only 5 possible.
Is 10 policies possible? If so, how?
View 3 Replies
View Related
Jan 21, 2013
I say the answer is ten. That means ten hosts can be behind the firewall and hit the internet. The eleventh doesn't get to go out. I'm being told by a coworker that the "10" in the part number refers to the number of IPsec VPN peers.
Who's right?
I say if you want an unlimited number of users on the inside to be able to get to the internet, you need the ASA5505-SEC-BUN-K9
Mfg. Part: ASA5505-SEC-BUN-K9
Mfg. Part: ASA5505-50-BUN-K9
Mfg. Part: ASA5505-BUN-K9
Cisco ASA 5505 10-User Bundle includes 8-port Fast Ethernet switch, 10 IPsec VPN peers, 2 Premium VPN peers, Triple Data Encryption Standard/Advanced Encryption Standard (3DES/AES) license ASA5505-BUN-K9
View 2 Replies
View Related
Apr 24, 2012
I have a question regarding the number of computers connecting to a single wireless router. I want my internet connection at home to be used only by my laptop. I have my connection secured by password and etc, but I was wondering if there is a setting I can use to control the number of computers connected to a wireless router?
View 2 Replies
View Related
Apr 15, 2013
I am considering deploying several of these for our church to provide internet access. When reading the manual, I found on the last few pages that the device only supports a max of 63 users at a time. Is that correct? If so, any way to add more ?
View 1 Replies
View Related
Apr 17, 2011
Im using AIR-LAP1142N-N-K9 access points (it supports b/g/n). Somestimes the AP has up to 80 users connect to it.SOme recommends the AP should have between 25-35 users max.Any one know the recommend maximum number of users connect to a AP? And how can you tell the traffic going through the AP is congested?
View 1 Replies
View Related
May 16, 2012
Can i connect about 12 devices (laptops and mobile phones) to a 8 mbps or 16 mbps wifi router?
View 1 Replies
View Related
Feb 28, 2012
Is it possible to configure WLC so that only one user can connect to wireless network at a time with one login? We have WLC5508 (7.2.103.0) web authentication with LDAP (Active Directory).
View 2 Replies
View Related
Apr 26, 2013
I wanted to know if anyone can say with certainty how many clients can stay connected 'Aironet 1140 series. I state that I should connect WiFi in about 350 clients.
View 6 Replies
View Related
Jul 5, 2012
How many user accounts i can create to a Cisco ASA box? Say for example a Cisco ASA 5510 or Cisco ASA 5520?
View 5 Replies
View Related
Mar 26, 2011
I have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
View 13 Replies
View Related
Apr 10, 2013
If the "GLC-SX-MM" is offical supported on "SPA-5X1GE-V2" ?My customer tested it and it seems to work but now i need an offical statement In the data sheet there is no entry of the requested SFP. url...
View 3 Replies
View Related
Feb 22, 2011
I have a Cisco 7206VXR with NPE-400. The IOS version is 12.4(24)T3. I installed a SA-VAM in the router in slot 6 but getting the following on the console.
AP-Pune-RT#Feb 23 11:16:34.484: %PA-3-NOTSUPPORTED: PA in slot6 (Unknown (type 650)) is not supported on this chassisFeb 23 11:16:34.484: %PA-3-DEACTIVATED: port adapter in bay [6] powered off.Feb 23 11:16:34.584: %PA-2-PABRIDGE: Failed to config bridge for PA 6Feb 23 11:16:35.384: %PA-4-IMPROPER_REMOVAL: Improper removal for slot 6.Feb 23 11:16:35.384: %PA-3-DEACTIVATED: port adapter in bay [6] powered off.Feb 23 11:16:35.468: %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed connection id=975, sequence number=677864
Is the SA-VAM not supported in the Router 7206VXR?
View 3 Replies
View Related
Oct 9, 2012
I have an issue with Cisco 3560V2-24-PS which it indicates not supported in DFM. I can see the device working properly when I do snmpwalk and snmv3 test and device credential test. In fact I can see chassis view of this device.
IP Address = 10.10.1.60
DNS Name = DISTRI_SW02
Device Status = Unknown
Device Type = N/A
Aliases = N/A
Containments = N/A
But in LMS 3.2 supported device it indicates as supported. Current version of the switch is 12.2(58)SE2 which is higher than the minimum requirement 12.2(50)SE1. I tried to downgrade/upgrade IOS and still no luck.
As per information in the creent DFM (see below), it is supposedly supported 59.1.3.6.1.4.1.9.1.1023Cisco Catalyst 3750V2-24PS SwitchDFMDeviceUpdates19.0 Below is the current version of the LMS modules;
Products Installed Showing 1-9 of 9 records Product Name Version With Patch Level Installed Date 1.Campus Manager5.2.110 Oct 2012, 13:11:57 GMT+08:002.CiscoView6.1.910 Oct 2012, 11:27:52 GMT+08:003.CiscoWorks Assistant1.2.010 Oct 2012, 11:27:52 GMT+08:004.CiscoWorks Common Services3.3.010 Oct 2012, 11:27:52 GMT+08:005.Device Fault Manager3.2.010 Oct 2012, 11:27:52 GMT+08:006.Integration Utility1.9.010 Oct 2012, 11:27:53 GMT+08:007.Internetwork Performance Monitor4.2.010 Oct 2012, 11:27:53 GMT+08:008.LMS Portal1.2.010 Oct 2012, 11:27:53 GMT+08:009.Resource Manager Essentials4.3.110 Oct 2012, 13:17:50 GMT+08:00
Also my current device update.Showing 1-9 of 9 records Product Name Device Type Count 1.Campus Manager02.CiscoWorks Common Services03.CiscoView7614.CiscoWorks Assistant05.Device Fault Manager9366.Internetwork Performance Monitor07.LMS Portal08.Integration Utility09.Resource Manager Essentials812 I already downloaded all the patches online and all device updates were also updated.
View 2 Replies
View Related
Jul 14, 2011
There is support of devices not manufactured by cisco?For example satellite modems.
View 1 Replies
View Related
May 2, 2011
Which is the most stable, less processor intensive and VPN supported IOS for 2611xm. Currently I am using 12.4(15)T7 C2600-ADVENTERPRISEK9-M. But this image is causing lot crashes. My router uptime never crossed 4 hrs. It is crashing very frequently. Any issue with this image in 2611."
View 2 Replies
View Related
Jun 19, 2012
After upgrading to 7.2 on my 5508 WCS, the 1310 APs will no longer join. After a call to TAC they said the 1300 and 1400 APs are no longer supported on WCS. Is there any plan to add them back as supported in future releases?I was thinking I could downgrade my backup 5508 and change the APs to autonomous. Or is there some easier way to make them autonomous?
Also, as a low cost outdoor AP, I guess I am reduced to putting 1262s in a NEMA box with outdoor antennas. The 1552s are way too expensive for the quantity I need. Is there some other inexpensive outdoor AP that will replace 1300-1400 series?
View 6 Replies
View Related
Oct 11, 2011
Recently I purchased AIR-WLC2112-K9, but when I logged in I saw that system shows only 6 APs supported (I made print screen in addition). I'm running IOS v. 7.0.116.0 and I saw that there was some problems with earlier versions of IOS, but not this one.
View 5 Replies
View Related
Nov 20, 2011
we just purchased 2 asa 5585-40's and tried to add them to our lms 3.2 system and we were informed by cisco tac that they were not supported in lms 3.2. since we don't having funding for an upgrade, any work around within lms that could allow me to add the devices so i can use lms for syslog and to fetch the firewall configs on a regular basis, instead of having to setup a seperate syslog server and having to tftp the config's everytime i make a change.
View 3 Replies
View Related
May 15, 2011
Service policy output command is not supporting on Vlan interface of Cisco 2900 Router.I am having one HWic 4ESW Card and configured VLAN interface. But Service policy output command is not supporting.Same config is supporting in the Cisco 2800 Router.
View 13 Replies
View Related
Dec 6, 2011
I have a pair of physical ASR 1002 routers, called ASR-1 and ASR-2. I setup HSRP on both ASR-1 and ASR-2 on both g0/0/0 and g0/0/1 interfaces, nothing complicated, just straight forward HSRP.
Now Cisco TAC told me that HSRP is NOT supported between physical ASR routers. WTF!
Furthermore, they told me that HSRP only supported within a single ASR because of multiple routed processors. In other words, you can setup HSRP with a single physical ASR but not with two physical ASR routers.
HSRP can not supported with two physical ASR routers?
View 8 Replies
View Related
Aug 22, 2012
latest supported version of IOS for the Cisco 2811?
View 3 Replies
View Related
Oct 11, 2011
I have checked on Cisco.com and as per a module support document for ISR's G2, the NM-1CE1TI-PRI module is not supported on new ISR's.
Grateful if more clarification could be obtained about the above.
Will be router not detect the module when inserted in the chassis?
View 2 Replies
View Related
Sep 9, 2011
My problem with ASR 1006 as i tried to use the feature IRB ( integrated routing and bridging ) but i find that this feature is not supported i assume it may be a problem with IOS version or may be i made he configuration not in the proper way
so i am asking to try this feature on ASR 1000 series and work with it as I test this feature on other routers and it work just fine.
View 1 Replies
View Related
Dec 21, 2011
Can a 2504 wlc use a vlan ids of 190X? I have found that it supports 512 vlans but I have not found any restrictions in the id used.Vlan id 190X is distributed by the isp (they have the ASAs in their central site) so if it is not supported I must prepare a vlan transfer between switches.
View 4 Replies
View Related
Feb 6, 2011
I have a 6509 and a 6506- same IOS version and flavor, same hardware, etc. One supports rate limiting on the VLAN interfaces, the 6509 says "not supported due to hardware". What is the difference here? Im very confused on this since I was under the impression the chassis were the same- just in size.
View 1 Replies
View Related
Jan 17, 2013
Is 'mls qos' supported on Cisco 877? I want to implement bandwidth limiting on a specific IP using access-lists on a class-map.If yes, what version and software do I need (ip base, adv security, etc)?
View 2 Replies
View Related
Oct 19, 2011
is the Xeon E7540 supported in LMS 4.1 ? in HW Requirements he is not explicit listed,[URL]
View 1 Replies
View Related