Cisco WAN :: Install Security Licenses On 2911 Router?
May 27, 2013i'm trying to install the security licenses on a 2911 router and is giving the error shown in the attached file
View 4 Repliesi'm trying to install the security licenses on a 2911 router and is giving the error shown in the attached file
View 4 RepliesI have two ASA 5505's with Security Plus licenses on both.I am trying to force them to becoming an HA pair using active/standby.When I enable failover I get this message:
Mate's license (Licensed Cores ) is not compatible with my license (Licensed Cores ). Failover will be disabled.Do I need to apply new licenses to the ASA's?
Device licence details (same on both):Cisco Adaptive Security Appliance Software Version 8.2(1) [code] This platform has an ASA 5505 Security Plus license.
We are going to deploy a active/active setup of 2 ASA 5585's. Here we will implement a concept of security zones through context's where different services will be firewall through a separate firewall context. will a security context consume 1 or 2 licenses because we are running in a Active/active setup? Right now I got completely confused when my manager asked me that question.I would say that we only use on security context license - but since we are running in a active/active setup - even though the other instance is standby - will it consume a context license? We are using ASA OS 8.4.x.
View 5 Replies View RelatedWe have purchased a number of 2911 routers.We got Base & security license as we wanted to enable encryption. However we probably wont use the security.We are replacing 2811 routers.Unfortunately the 2811 routers have FXS ports with 2 - 4 POTS handsets - I completely forgot about these ports when I was ordering.Now I have VIC3-FXS cards which are ok in the 2911 but unfortunately I cant get them to work.I am missing PVDMs (well adapters anyway), and even if I got them the router wont take any commands relating to voice due to the license.Is is possible to 'rehost' the security and turn it into a UC ?I am new to these 2911 and Licensing.
View 1 Replies View RelatedI purchased a 2911 router and a 25-pack of VPN licenses (PID: L-FL-SSLVPN25-K9=).I registered the license, and supplied the serial number of my router when asked.I received a .lic license file.When I attempt to install the license on the appliance, I receive an error:
% Error: Install failed. UDI L-FL-SSLVPN25-K9=:FTX1542AKJ3 on license does not m
atch any device
0/1 licenses were successfully installed
0/1 licenses were existing licenses
1/1 licenses were failed to install
However, the following establishes that the serial number is correct:
SFGallery#show inventory
NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 chassis"
PID: CISCO2911/K9 , VID: V04 , SN: FTX1542AKJ3
NAME: "C2911 AC Power Supply", DESCR: "C2911 AC Power Supply"
PID: PWR-2911-AC , VID: V03 , SN: AZS153303LY
I want to block gtalk on my new cisco 2911 security enabled router.
View 3 Replies View Relatedi downloaded and transfered the new ios to the 2911, but no install routine started.
View 3 Replies View RelatedI want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
View 2 Replies View RelatedInstlling WPA2 on my router I had this router WRT54G ver 6 for several years and it works perfect only thing is I have no security on my n wireless
View 3 Replies View RelatedI have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
View 3 Replies View RelatedI try to configure PGM in my 2911 plattform but it was impossible. I tried with many 15.1 version that support this protocol.
Someone configured PGM over 2911 Routers? What does correct IOS for work?
We are designing a solution for our customer, they plan to connect 5 site to their main office, on the main office, they use CISCO2911, branch use CISCO1921, so my question is:
1, If I want to use IPSec VPN connect branch and main office, apart from the router, I only need to buy the Security pack, like SL-19-SEC-K9/SL-29-SEC-K9, no need to buy SL-19-DATA-K9/SL-29-DATA-K9, am I right?
2, If I want to use SSL VPN connect branch and main office, apart from the router and SL-19-SEC-K9/SL-29-SEC-K9, I only need to buy L-FL-SSLVPN10-K9 for CISCO2911 in main office, no need to buy L-FL-SSLVPN10-K9 for branch as each CISCO1921 has two default SSL license?
I have a new BGP configuration that consists of two asa 5510 and two routers 2911 at the back. My question is : Does asa 5510 support BGP?
View 1 Replies View RelatedI did an ISE 1.1.1 installation on a VMWare with ESX 5.0. After installation I am not able to login with my credentials(username admin, password XXXX) I can ping my ISE server after initial installation but I can not ping my ISE server after full installation.I did the installation several times and even did it on a VM with differrent VMversion.
View 3 Replies View RelatedI have forgotten my Netgear security/passphrase. How can I retrieve the original key or install a new one?
View 2 Replies View RelatedWe got this software from Cisco and we need to setup this in our network to manage the firewalls.Need to know this software is used to centrally manage the firewalls ?Also how i can i know how to setup this in our network?Assuming this software we will first install on server right? it can be windows server ?Second thing to know is what config changes we have to do on the existing and new ASA so that they can be managed centrally?Also Where i will get the documents that tell me how to setup/install this software?
View 5 Replies View RelatedI have DIR-615 h/w: c1 f/w:3.01. I can't figure how to install security or f/w update through my imac.Do I need to use a cable connection?
View 1 Replies View RelatedIve got a customer asking for 2 products to be installed on an ASA 5520?
ASA 5500 SSL VPN 10 Premium User License and AnyConnect Essentials VPN License - ASA 5520 (750 Users)?
Am i correct in saying only one of those licences will actually be active at any time?
We have a 5520 ASA with a 100 user ssl license. We need to increase this but 250 is overkill. Is there an option to just add 50 more licenses or do we have to go up to 250?
View 2 Replies View RelatedI am having one router CISCO2911/K9 (Cisco 2911 w/3 GE,4 EHWIC,2 DSP,1 SM,256MB CF,512MB DRAM,IPB). But now my management asking me to upgrade this router as CISCO2911-SEC/K9.
What will be the BOM for this up gradation.
Need to know the number of VPN licenses that is available,
1) I have site to site vpn connections.
2) SSL VPn (browser)
3) IPsec client vpn.
How many vpn connections are allowed? can multiple connections be made using the same username for IPsec VPn clients.?
Any trouble with IOS XR licenses dissapearing after a power off ?I was able to add them correctly, but after the power off "show licenses" gives and empty message, but the logs states the licenses are already there.I'm working with a CRS-3 with IOS XR version 4.0.1.
View 1 Replies View RelatedWe are looking at buying an ASR1001 but I'm confused by the Licenses and I've struggled to find the information in the cisco data sheets. The router will need to run IPSEC on gre tunnels and I figure that I need the IPSEC license (FLSASR1-IPSEC) do I also require the Advanced IP Services license? or is all that is required the IPSEC license? Is there some sort of list that shows the feature set of each license, they cost the same amount so I'm not sure which license fits what we require best or if we need both.
View 1 Replies View Relatedis that possible to increase the number of SSL VPN User Licenses on ASA5510-SSL100-K9 using for example L-ASA-SSL-50= ?Is there any limitation ?
View 3 Replies View RelatedAfter install the License for 25 AP more to a wlc 5508 with 100 AP base license and reboot WLC, the License base for 100 AP´s and this new one 25+, it's not anymore on the system, after reboot the WLC show 0 AP´s supported, and the only one license appear are 500 AP evaluation with Time expires.
View 1 Replies View RelatedI have a cisco ASA5505, with base license, it appears I can only have 2 ssl/webvpn connection running at any one time. How can I upgrade only the webvpn portion to allow more licenses?
View 2 Replies View Relatedi currently have a ASA5540 with 250 SSL VPN Premium licenses and looking to purchase another 500 licenes on top of what i already have.I have been told that i cant simply add 500 licenses onto the 250 to make 750 in total and that i need to purchase a 250-500 licenses or 250-1K licenses. Is this correct? I ask this because on the cisco website, that there is L-ASA-SSL-250-500= & L-ASA-SSL-500-750= part numbers?
View 1 Replies View RelatedWe've been upgrading our WLCs to 7.0.230.0 but I've notifced after they have been upgraded they no longer appear in the controller section in License Center on the WCS. They still exist in the WCS and the audit the configuration jobs are working. I've also tried manually triggering the Controller License Status background tasks and this runs without reporting any errors.I thought it may be because the WCS was at a lower version but I've now upgraded this to 7.0.230.0 also but the WLCs are still missing.
View 1 Replies View RelatedHow to confirm the linceses required for me to get this working. I understand that it needs the 'AnyConnect for Cisco VPN Phone' license but do I also need to have anyconnec essentials? This is for ASA version 8.2 and the a license info below is for the ASA i intend to delpoy this on. This platform has an ASA 5550 VPN Premium license.
View 2 Replies View RelatedShared licensing of ASA?I have 2 ASA 5585 in cluster and I have to Implement SSL / VPN license My question:Since I have a cluster in 8.3 version, can I use only one license VPN / SSL for two, without necessarily implement the Shared Server licenses and participant.
View 4 Replies View RelatedI have 2 5508 that are currently running as active with 150 licenses each. I want to go to HA SSO can 100 of the licenses be relicensed to the primary since it only requires 50 licenses to convert an active license 5508 to standby HA SSO?
View 3 Replies View RelatedWe are trying to activate two L-ASA-SSL-100= licenses in our ASA5520 and we are getting the below error:
Wrong Sku(s) 'L-ASA-SSL-100=' for 'ASA5520_AIP20-K9' : Device contains following licenses 'ASA5520-VPN-PL,ASA5520-SSL-50, ASA-AC-M-5520, ASA5500-ENCR-K9'
Serial Number = XXXXXXX
The new serial number provided is not the same platform type as the failed serial number. An upgrade request is not allowed.
We have ordered the following 10 line items , but only got 3 licenses , unless the 3 licenses somehow have all the licenses integrated into the 3 part numbers below, but I suspect not.
Licenses attached from Cisco:-
N7K-C7009-XL-SBUN Nexus 7009 Scalable Feature License x 1
N7K-C7009-SBUN-P1 Inc LAN,ADV,TRS,EL2,DCNM,DCNMSAN,MPLS,SAN,XL -Promotion x 1
[Code].....