Cisco :: WCS V.7.0.230.0 To NCS 1.1 Upgrade Not Accepting License?

Nov 15, 2012

We are currently preforming the upgrade from WCS v.7.0.230.0 no NCS 1.1. When we select the Lic file we get an error message "Unable to add any license without an NCS (L-NCS-1.0-K9) license." The file name is WCSUPG20121115142018448.lic.

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRP160N - Not Accepting Admin Password After Firmware Upgrade

May 9, 2012

I just installed the firmware upgrade 3.0.03 for my WRP160N router.  It is now not accepting my Admin password.  Nothing else has changed expect network name now shows linksys and not my assigend network name (SSID)

View 1 Replies View Related

Cisco VPN :: Upgrade SSL License For ASA5540?

Apr 2, 2013

I have ASA5540 with 1000 SSL-VPN License, then I would like upgrade from 1000 to 2000. Which part I have to add between
 
L-ASA-SSL-1000= 
L-ASA-SSL-1K-2500= 
ASA5500-SSL-1000=

View 1 Replies View Related

Cisco VPN :: 5505 - SSL License Upgrade?

Aug 11, 2011

My client is having a 5505 which supports 2 SSL peers as per now and we want an upgrade . I had a look into GPL and I was confused with two of the following part numbers . Which one should I go for as both of these look same for me and there is a huge difference in price .
 
ASA5500-SSL-10
ASA 5500 SSL VPN 10  Premium User License
ASA-AC-E-5505
AnyConnect Essentials VPN License - ASA 5505 (25 Users)

View 4 Replies View Related

Cisco Firewall :: Unable To Upgrade Pix-525 FO License?

Feb 10, 2012

Not  abe to upgrade the IOS image PIx7.0  from earlier version 6.3   in  to my old Pix-525 FO(Secondary unit) license box .
 
Is it possible to upgrade without Primary unit (Unrestricted License)  ?

View 6 Replies View Related

Cisco Firewall :: Upgrade License On ASA 5510?

Oct 12, 2011

I have a two ASA HA and I'd like to upgrade the license to ASA5500-SSL-250. I need to know if i have to purchase one license (ASA5500-SSL-250) for the Active unit and one license  (ASA5500-SSL-250) for the standby unit.

View 3 Replies View Related

Cisco Firewall :: ASA5505-SW-10-UL - How To Upgrade License

May 10, 2011

I want to confirm if the upgrade license (ASA5505-SW-10-UL=) is backward compactible with PIX 501 firewall device? though pix 501is end of life bit i want to verify if the upgrade license for asa5505 will work with it?

View 4 Replies View Related

Cisco Firewall :: ASA 5505 License Upgrade

Dec 17, 2012

I have a Cisco ASA 5505 device with basic (default) license, currently all my reirections, VPN's, VLAN's(3 Vlan's) etc are configured on the same and are working fine.Now i need to upgrade my basic license to "Security Plus" for some additional features, if i upgrade it directley is there any complications in present rules, below is my doubhts
 
1. if i upgrade, did it change any of my present configurations ?
2. is there any name change or property changes for VLAN's or VPN's
3. did it affect the firewall functions
4. If anything goes wrong, can i restore it in to my old state using my previous dump.

View 1 Replies View Related

Cisco WAN :: 1921 - IOS Upgrade With Security License?

Nov 4, 2011

I have a Cisco 1921 ISR Router with Security License running software version 15.0. I want to upgrade the router to 15.1. But I don't want to lose the security license that came with the router. When I look at the IOS downloads page on Cisco, all I see is universal images for all versions of 15.1.
 
My question is - where is the security license stored? In the IOS or programmed in somewhere else of the router? If I upgrade my router to one of the newer 15.1 universal images, will I lose my security license?

View 2 Replies View Related

Cisco :: LMS 4.0 To 4.1 Upgrade License - Install 4.1 Directly?

Nov 21, 2011

We face following situation: Currently LMS 3.2 is installed. We order a 3.x to 4.0.1 upgrade license, in the meantime 4.1 is launched. So, we ordered the free of charge 4.0 to 4.1 minor upgrade license. Now we have a 3.x to 4.0 upgrade license and the 4.0 to 4.1 minor upgrade license and don't know how to proceed.
 
Is it now possible to install 4.1 from scratch directly and use the 4.0 to 4.1 upgrade license to register it? Of course we want to avoid to install 4.0 as an extra step...

View 3 Replies View Related

Cisco VPN :: ASA5510 - License To Upgrade From 2 To 250 Users

May 21, 2013

i have bought the below licenses for the ASA5510 to upgrade from 2 to 250 users and yet i can give access to 2 users only.
 
L-ASA-AC-M-5510=
L-ASA-AC-E-5510=
 
Kindly find attached the "show version"

View 6 Replies View Related

Cisco Wireless :: 5508 With 50 AP License Upgrade From 7.0.220 To 7.4

Mar 13, 2013

5508 W LAN controller with 50 AP License upgrade from 7.0.220 to 7.4 is it will effect to the license and configuration? Because the license came pre- installed. 

View 1 Replies View Related

Cisco Firewall :: ASA 5505 Security Plus License Upgrade?

Apr 19, 2012

We want to upgrade one of our Cisco 5505 with Security Plus license. what is the difference between L-ASA5505-SEC-PL and ASA5505-SEC-PL upgrade licenses?

View 1 Replies View Related

Cisco Firewall :: ASA 5512 - Cannot Connect To VPN After License Upgrade

May 1, 2013

I am having an issue where I can't connect to VPN after upgrading the license. The license upgraded is related to AnyConnect VPN. I noticed from the newly upgraded license, the Encryption-3DES-AES is disabled whereas previously it was enabled.
 
ASA 5512-K9
Version 8.6(1)2

View 2 Replies View Related

Cisco WAN :: Upgrade License 1941-K9 From IPBase To Security

Oct 25, 2011

I would like to Upgrade license Cisco 1941-K9 from ipbase to security

View 5 Replies View Related

Cisco WAN :: ASR1001 Upgrade - License Module Command

Oct 4, 2011

I'm trying to upgrade an asr1001 (r1) from asr1001-universal.03.02.00.S.151-1.S.bin to asr1001-universalk9.03.02.00.S.151-1.S.bin. i've put in the boot system flash asr1001-universalk9.03.02.00.S.151-1.S.bin command and reloaded but the box keeps loading first image the configuration register is 0x2102. i've tried the license module command to enable adv enterprise but it made no difference so i removed it again. my license is now;
 
License Package Information for Module:'asr1001'
Module name   Image level      Priority  Configured  Valid license   
asr1001            adv enterprise      1          NO           adv enterprise   adv ip services  2  NO adv ip services ip base  3   NO  ip base

View 2 Replies View Related

Cisco Firewall :: 6500 - Upgrade Context License

May 3, 2011

I have a firewall module in a Switch Catalyst 6500. I wan to  upgrade its context capacity to a greater capacity. When I looked it in the Dynamic configuration, it send me following number parts:
 
FR-SVC-FWM-VC-T1=
FR-SVC-FWM-UPGR1=
 
The first one is the license to have 20 context and the next one is upgrade from 20 context to 50 context. My problem is that I haven't could find a service support contract associate them.I want to know if they have or not service contract, because I can´t find them.

View 1 Replies View Related

Cisco LAN :: Failed To Upgrade ASA5505 License From 10 To Unlimited Users

Sep 4, 2011

I´m trying to upgrade a Customer's ASA 5505 base license from 10 to 50 users (ASA5505-SW-10-50=). But the reseller sent a ASA5505-SW-50-UL= license instead. I tried to register that license and the following messaged appeared.
 
Wrong Sku(s) 'ASA5505-SW-50-UL=' for 'ASA5505-K8' : Device contains following licenses 'ASA5505-SW-10,ASA5500-ENCR-K9'
Serial Number = JMX1235Z0TZ

same platform type as the failed serial number. An upgrade request is not allowed. open a Service Request using the TAC Service Request Tool at [URL].As an alternative you may also call our main Technical Assistance Center at 800-553-2447.Sincerely,Cisco Systems Licensing.
 
I tried to contact TAC for assistance but It's not possible because that kind of service is outside the parameters of the service contracts associated with my cisco.com profile.

View 3 Replies View Related

Cisco Security :: ASA 5545 - 8.6 - Active / Standby - License Upgrade

Feb 4, 2013

We are planning to upgrade the ASA license in an A/S pair by adding the ASA5500-SC-20= license. The ASA is 5545 and runs 8.6. According to documentation, after 8.3 version, the ASAs can share a license features and do not require the same license on both boxes. I run a test in GNS3 with 8.4(2) images and I saw that by adding the 'activation-key' command only on the primary unit did the job as the 'show activation-key' output shows. In order to be 100% sure would like to verify the following:

Putting the activation-key only on the primary unit is enough and there is no need to do anything elseIn case the primary unit is standby, again we have to put the actication-key command on the primary unit (I am asking this because the 'activation-key' command is not listed under the commands that are not replicated to the other unitk, but doesn't make sense to be replicated since the activation-key is 'tied' with the S/N of the device).

View 4 Replies View Related

Cisco Switching/Routing :: WS-X3750-24P-L For LAN To IP Base Upgrade License

Mar 26, 2013

Would like to ask what is the rigth SKU license for WS-X3750-24P-L for  LAN Base to IP Base Upgrade License

View 3 Replies View Related

Cisco VPN :: ASA 8.2 Does Upgrade To AnyConnect License Affect Current IPSEC

Feb 29, 2012

I'm planning to upgrade Cisco ASA 8.2 to an anyconnect essentials and mobile license. Are there any concerns with some users continuing to utilize the cisco vpn IPSEC client while others migrate to the Anyconnect? I just want to make sure when I upgrade the license that there will not be an immediate requirment to have all users switch to Anyconnect immediately.

View 2 Replies View Related

Cisco Switching/Routing :: 3750x / IOS Upgrade And License Level?

Oct 7, 2012

I have two 3750x in a stack  running c3750e-universalk9-mz.122-55.SE3.bin with License Level: ipservices?I am planning to upgrade to c3750e-universalk9-mz.122-58.SE2.bin will this keep my ipservices licence or revert back to IPbase

View 3 Replies View Related

Cisco Switching/Routing :: 3750X / 3750 V2 - Upgrade License

Dec 6, 2011

I recently added a 3750X-24P-L into a stack of 3750V2 switches.  I did so by getting the temporary upgrade license from LAN Base to IP Services; I added the switch no problem.  I now have the permanent license and I was wondering if I could install the permanent license without having to remove the switch from the stack.  I tried a license install but that failed.  The switch is not currently the master but I figured I might promote it and then try the install. 

View 4 Replies View Related

Cisco Switching/Routing :: License Upgrade In 2900 For Security K9 Feature?

Dec 18, 2012

i have 2921 router with base license . i want to upgrade to it to security k9 feature or want to enable it. i have license file with product activation key. how should i do it. if any body have screen shot file

View 1 Replies View Related

Cisco Wireless :: AIR-LAP-1141 / Is License Required To Upgrade From LWAP To Autonomous

Jul 7, 2011

I have a customer who accedentally got a AIR-LAP-1141.  He needs it to be autonomous.  If I convert from LWAP to Autonomous, will there be a licensing issue?

View 1 Replies View Related

Cisco Firewall :: Is It Required For 3des License Upgrade For ASA 5510 To Reboot

Oct 1, 2012

Is it required for the 3des license upgrade for the asa5510 to reboot for the further configuration of site2site tunnels.

View 1 Replies View Related

Cisco Firewall :: Difference Of VPN Plus License And Security Plus License ASA 5520

Oct 16, 2012

What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.

View 1 Replies View Related

Cisco :: Installation PI1.2 Basic License With LMS4.0 License For 100 Devices

Apr 3, 2013

I’m stuck in some problem with installation of LMS4.0 in customer site.
 
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
 
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?

View 3 Replies View Related

Wep Key Is Only Accepting 9 Digits?

Jan 21, 2012

i was having probs with the daughters dell laptop wireless setup, was intermittent, downloaded latest drivers, went to set up the connection, im running 128 bit wep and the damn software will only take the first 9 digits? i have 8 other wireless devices running of this so i dont want to have to change settings on all of them?

View 5 Replies View Related

Cisco WAN :: 2911 Not Accepting HTTPS Access

Jul 15, 2012

I have a 2911 which works perfectly except I cannot access it via HTTPS. HTTP and SSH both work. I've regenerated the RSA-key several times but to no avail.The box has a host- and domain-name configured.

View 8 Replies View Related

Cisco VPN :: ASA 5510 - Stopped Accepting Connections?

Jun 7, 2012

My ASA 5510 has stopped accepting connections today.  I cannot connect with ASDM either.  ASDM hangs at "Contacting the device.  Please wait" and does not return an error or time out.  I can telnet into the device but my CLI knowledge is elementary at best.  I'm trying to determine how to view or enable the correct logging and view via CLI.  I have looked at the client log from one of the users that cannot get in and have attached it.  It looks like Phase 1 is not completing but I'm not sure how to view what the ASA is logging.  I have run debug cry isa and debug cry ipsec but it just returns to the prompt and I'm not sure what I should expect to see or what command to run to view the results.

View 3 Replies View Related

Cisco Switches :: Switch SF 200 Not Accepting Static IP

Feb 25, 2013

I have fiber optics no router One static IP address, when connect SF 200 the system LED flashes and there is conductivity.I checked ther is no setting for static ip,Gateway,DNS, so is this unit only for Dynamic address

View 3 Replies View Related

Linksys Router Not Accepting New Connections

Oct 20, 2011

It's a linksys wireless router attached to their service provider modem and it can no longer recieve new connections. The pc's connected to it before still run through ti fine but any new laptops using the proper authentication and password are unable to make a connection.First thing I am going to try is a factory reset(they mentioned resetting the router but they may have just rebooted it)

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved