Cisco Wireless :: 4402 Wlc / Apple Devices Several Retries To Connect SSID?

Jun 11, 2012

In the company we have two SSIDs for corporate and guest networks respectively when I try to connect to any of the SSIDs it doesn't happen until 5 retries. The only log I get that seems to be related to it is the following:
 
*Jun 11 11:48:09.062: %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SW: apf_policy.c:541 Disconnecting mobile 00:23:32:73:d7:15 due to switch of WLANs from 1(femsawl) to 2(visitas)
 
Here it shows a switch between SSIDs but if you just turned on an apple device and try to associate for the first time to any of the SSIDs the scenario is the same, several tries to connect.I am running a 4402 wlc with 6.0.202.0 software version.

View 4 Replies


ADVERTISEMENT

Cisco Wireless :: 877w - Apple Devices Not Able To See Wired Apple TV

May 15, 2013

how to setup the wireless interface to forward multicast packets?  Basically I cant get the ipads etc.. to see the AppleTV to control it.  I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface.  I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.

View 1 Replies View Related

Cisco Wireless :: Connect WLC 4402 Ports On Different Devices?

Apr 7, 2013

I need clarification on cisco WLC 4402 which have two ports .
 
Can we connect one port on CORP core switch and one port in DMZ zone to bifurcate the guest traffic from WLC itself ?

View 3 Replies View Related

Cisco :: Apple Airplay Not Working On WLC 4402 Wireless Network

Dec 6, 2011

I've got 3 WLC 4402 controllers and the wireless is working perfectly except for 1 issue. We are trying to connect an apple tv, so we can stream picture, videos etc from ipads and Macbooks to a large display for media teaching.The setup works at home, but not at work.The apple TV is on the same network as the wireless apple devices, (we use a 10.6.4.x-10.6.5.254 range), both are dhcping the addresses (have tried fixing but that made no difference). I've enabled multicasting and igmp snooping and set the multicast address as 239.0.0.0 and it still doesn't work.

View 11 Replies View Related

Cisco Wireless :: 5508 - Apple IOS Devices

Jun 14, 2012

I'm seeing a problem with Apple IOS devices connecting from one SSID and then connecting immediately to another. I've tried to replicate this fault with non Apple IOS devices, but I'm unable. 

Environment:
Single 5508 WLC running 7.2.110.0 AIR-LAP1142N-A-K9 AP's
 
WLC is in clients head office, MPLS to their branch sites. AP's are in Flex Connect mode, with AP and Flex Connect groups for the AP's at the branch. 3 x SSIDs; Corporate (802.1X), Guest (Web-Auth) & Non-Corp (PSK).
 
Scenario:
Client is connected to the Corporate SSID with his iPad (new model, running iOS 5.1.1). No problem with access, he is able to roam throughout the building with good SNR/RSSI. He wants to test the other SSID's, he attempts to connect directly to the Guest or Non-Corp and gets an error message on the client saying 'Unable to Connect' or 'Unable to Join'. Debugs on the WLC for the client shows no connection attempt, no errors. I can see the client disconnect from the Corporate SSID, but nothing for the Guest or Non-Corp SSID.
 
If the client then disconnects and forgets the Corporate SSID from the wireless profiles on their i Pad, waits 20-30 seconds (I can see the client disconnect cleanly from the WLC) and then attempts to connect to the Guest or Non-Corp SSID's - he doesn't have a problem. He immediately associates, and is able to connect. If he then tries to connect directly to another SSID, while still associated to another from the same WLC/AP – he gets the error again. Forget/wait 20-30 seconds, attempt to connect – no problem. We've tested with several i Phones (4 & 4S), i Pads (2 & new model) - all running the same Apple IOS (5.1.1).
 
I unfortunately can't do much troubleshooting with TAC on this as the client is no longer onsite, and I don't have a 5508 in our lab that I can currently test with. I've tried playing with beacon intervals, etc to no avail.

View 3 Replies View Related

Cisco Wireless :: WLC 2504 / Apple Devices Dropping Off Wi-Fi Network?

Jul 25, 2012

I have recently deployed a wireless network using a WLC 2504 with 21 Light APs. All seems fine except that Apple Devices drop their connections every 15 minutes or so. A couple of minutes later they can reconnect but obviously something is wrong.

View 2 Replies View Related

Cisco Wireless :: 1200AP - Apple Devices Choosing Wrong Encryption

Apr 14, 2013

I have two Cisco 1200AP.
 
I have it configured with two SSIDs, one corporate (802.1x) one using WPA2 Personal.
 
I have no issues on the corporate, but I have found that Apple devices appear to detect it as a WPA2 Enterprise, and request a username and password.
 
If I enter the network manualy as WPA2Personal the devices joins the network ok. Then ocasionaly the device looses its link to the network and fails to pass traffic.
  
Building configuration...
Current configuration : 5134 bytes
!
version 12.2
no service pad

[Code]....

View 4 Replies View Related

Cisco Wireless :: 1140 - Apple Devices Asking For Password On Open Networks

Jan 27, 2013

we are running 1140's and 1130's in autonymous mode and seeing a TON of requests for passwords on IOS devices where we have an open network.
 
This typically happens when we things are busy in the space.
 
All other non IOS devices do connect, and most IOS devices connect after a considerable amount of time.

View 5 Replies View Related

Linksys Wireless Router :: WRT120n - Intermittent Connection For Apple Devices

Dec 3, 2011

I recently upgraded my Linksys wrt120n router firmware & had to reconfigure settings.  Subsequently, some (but not all) of my apple devices are having intermittent wireless connection problems.  Specifically, my ipad1 & ipad2 never lose their connection but a mac book pro (~ 2 years old), iPhone 3g, iPhone 4, older iPod touch & very old i book g4 all work for a period of time (usually 1/2 day) & then lose their connection.  When I attempt to reconnect these devices I receive the following error..."unable to join the network xxxxxx....".  I also have a Dell laptop (1 1/2 yrs old) that generally does not have the connection problem.  Finally, when the devices do lose their network connection all I have to do to reconnect is go to the Linkys router setup webpage & click on save & the wireless connection works again (almost like this is just refreshing the connection for these specific apple devices).  I was not having any problem prior to the firmware upgrade & from what I have read the older firmware version is no longer available so going back to the old firmware does not appear to be an option. 

View 1 Replies View Related

Cisco Wireless :: 5508 - Apple Devices Timing Out From Guest Network With Captive Portal

Jan 29, 2013

I am setting up a new Guest network with a captive portal and it seems to all work fine except when Apple devices go to sleep. When they come back on it isn't just a case of logging in again as it just indicates to the client that it is still connected and won't present the login page again. The Controller will show the client as auth required. So far the quickest way has been for me to delete the network on iPads and re-enter my settings or create a new profile on a Macbook and join again. I have also had some success when doing a manual DHCP refresh on my Macbook which sometimes seems to kick the Controller into action so it presents the login page to the client again. Whether it is related to the timers on the Controller (5508 running code 7.0.235.3) or - as I just read in another post by Leo - the 20 minute timeout that all Apple devices have built in to conserve battery life

View 3 Replies View Related

Cisco :: 1240 AP / 4402 WLC - VLans To Be Accessible To Wireless Devices

Sep 27, 2012

We have four VLANs that need to be accessible to wireless devices. The VLANs serve the following groups: staff, student, guest, phone
 
We are currently using a WEP/MAC authentication for staff and phone wireless networks.
 
I am looking for what your recommendation would be to provide reasonable level of wireless security, particularly with the staff network, but at the same time not require a high level of management, ex. managing active and inactive MAC addresses for MAC authentication. We have the following components available - 1240 APS, Windows AD, a 4402 WLC, and 6 campuses, and outdated Cisco ACS.We need to provide connectivity to Cisco wireless phones, laptops, iPads, cell phones.

View 2 Replies View Related

Cisco :: 4402 - How To Distribute SSID To Only Few AP's

Nov 12, 2012

we have a 4402 controller with sw 7.0.116 and a wcs with sw 7.0.172.
 
We have to create a new wireless network, and would like to send the ssid to only one AP. Is this possible ?

View 1 Replies View Related

Cisco :: 4402 - Mac-Address Filtering Using More Than One SSID

Apr 9, 2013

I've been asked to configure mac-address filtering on our WLC 4402 and it was basically straight forward.  however i noticed that in creating the filter you can only choose 1 SSID or the other option would be to choose all?  My question then is what happens if i need a user one 2 specific SSIDs?  can i create separate filters for each SSID but using the same mac?

View 1 Replies View Related

Cisco :: 4400 / Apple Devices Not Releasing IP Addresses?

Oct 10, 2011

We have a Cisco 4400 controller and a mix of 1010 and 1131 access points.
 
We have been running out of IP's on our DHCP server because the apple devices are not releasing there IP's.

View 1 Replies View Related

Cisco :: Authenticated Guest Access Of Apple Devices WLC4400

Apr 26, 2011

On my wireless network, I am running guest access that I want to have as authenticated. If I enable WLAN, security, layer 3 web policy, when an iPAD / iPhone connects, they get directed to the Web Auth splash page, on where they must enter username & password. My users do not want to be directed to this page everytime they login - just select the SSID and connect - is there a way of authenticating guests via a WLC4400 without going through the splash page everytime?

View 6 Replies View Related

Cisco Wireless :: 5508 Best SSID Practices For Really Old Devices On WEP

Jul 26, 2012

setup a WEP SSID on my 5508 controllers.  THat being said, I have multiple sites with extremely old scan guns that only do 104bit wep.  I plan on locally switching this SSID and using static WEP 104bit key with MAC authentication, and then ACLing to limit my inherent security issues/exposure once someone compromises my WEP key.  [code]

View 4 Replies View Related

Cisco Wireless :: WLC 5508 To Use Apple Bonjour Service For Apple TV And IPads

Oct 22, 2012

A customer of ours has the following access points and wireless lan controllers on site.  They want to use the Apple Bonjour service with Apple TV's and iPads.  I have enabled multicast feature of the 5508 globally and one the SSID.The Apple TV has an ethernet connection and the iPads connect over the wifi.  The Apple tv is on the same subnet as the iPad's - the Bonjour features do work for approx 5/10 minutes then it stops working for some reason. The Access Points plug into a Cisco 2960 Layer 2 switch, the 5508 controllers plug are in LAG mode and plug into a Nortel Layer 3 stack which I have enabled IGMP snooping.I've read that the Apple Bonjour service isnt designed to work on a multi subnet network - but both the Apple TV and iPad are connected on the same subnet.  Sounds like some kind of timeout but not too sure.

View 5 Replies View Related

D-Link DIR-655 :: No Connectivity Between Wired And Wireless Devices (on Main SSID)

Feb 24, 2011

Ive had this 655 for about a year now and it has been rock solid. But, there has been one slight issue.

And and all wireless devices can see each other and all wired devices can see each other....but the wired cant see the wireless and vis versa.

The wireless devices (W7 and Vista laptops) can see the wired devices when they are plugged in. But my phone and Galaxy Tab can only see whatever wireless devices there are (cant be plugged in). Even my wired Samsung TV cant see the shares on the Tab or wireless laptops (and vis versa). So, its certainly not a firewall or OS config issue.

Now, I made sure they are all connecting via the main SSID and not the "isolated" Guest SSID....but its acting like the main SSID is isolated from the wired LAN somehow.

Firmware 1.34. IPs for the wired and wireless devices are all in the 1.2 - 1.50 range.

View 14 Replies View Related

Cisco Wireless :: WLC 2504 7.3 / Reloads - LCS Provision Max Retries?

Dec 2, 2012

reloads of aps joined to wlc 2504 7.3 with this log messages
  
*Dec  3 16:30:47.575: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: LSC Provision max retries.
*Dec  3 16:30:47.575: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN

View 2 Replies View Related

Linksys Wireless Router :: Wrt54gs - Extend Wifi / Configure Devices For Ssid

Feb 16, 2012

I have two WRT54GS routers. I want to extend my WiFi from the router connected to my upstream in the office to a second router in the living room. I want devices configured for the SSID and passphrase of my current WiFi (which is find in the office) to work seamlessly in the living room. I understand I can do this by running a cable and configuring router 2 as a client of router 1 with router 2 exposing the same SSID and passthrase on a different channel.
 
But I really don't want to run a cable.There is a point where a client can see router 1 where an AP would cover the living room.
 
Can I put router 2 at that point, have it connect wirelessly as a client to router 1, and have it expose as an AP using the same SSID and passphrase? Can this be done without wiring the router?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Not Allow Connection To Devices When SSID Broadcast Is Turned Off

Jan 26, 2012

E4200 not letting my known wireless devices connect when SSID Broadcast is turned off.

View 1 Replies View Related

Cisco Wireless :: VWLC And Aironet 1252 - All Client Devices Such As IPhone / Laptop Can't Find SSID

Sep 6, 2012

I'm facing a problem on vWLC. I configured the vWLC and Aironet 1252, I created 2 SSID with below settings.

1. WPA2 Auth 802.1X
2. Web-Auth
 
Inside Wireless, I configured this AP Mode as "Local", but all of the client device such as iPhone, Laptop can't find these SSID.

View 3 Replies View Related

Cisco Wireless :: 1410 - Data Retries / Latency / Packet Drops

Feb 21, 2012

I have two 1410 bridges installed in a point to point link using external directional antennas.  The distance between the bridges is only 200M.  As you can see below from the output the RSSI and SNR are excellent with a good fade margin available.  These stats are almost identical to what my path profile calculated out to be.  During normal operation the latency on this link sub 2ms, during certain conditions the latency jumps to 40+ms and starts dropping packets.  I say certain conditions because we have not been able to pinpoint it.  Unfortunately at this time the customer does not have the ability to do any SNMP polling or collect any statistical information (working on getting this setup).  There are an excessive number of data retries and am not sure if that is normal.  During the issues I have observered the below command output and the numbers did not change, which leads to me believe that it is not a RF issue.  It almost looks like it's serialization delay, but I have no data to back that up.  During iperf performance testing of this wireless link I could push 54Mbps of UDP traffic no problem, no errors, no CRC's. 
 
Bridge Parameters
Encryption: WPA-PSK w/TKIP
Distance parameter: Configured to 1

[Code].....

View 4 Replies View Related

Cisco Wireless :: Aironet 1310 Bridge High Retries One Direction

Aug 15, 2011

We are experiencing a high amount of retries in one direction between two 1310 bridges with external yagi antennas.  What would this indicate?  Here is a copy of the linktest:
 
POOR (102% retries)  Time   Strength(dBm)   SNR      SNR          Retries
msec      In     Out    In      Out         In   Out
Sent :5000, Avg   5    - 66    - 64    31       45   Tot:  56  10149

[Code]....

View 2 Replies View Related

Wireless Devices Can't Connect To Wired Devices?

Oct 11, 2012

All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.

View 1 Replies View Related

Linksys Wireless Router :: EPC3925 - Apple TV And Home Sharing Won't Connect

Jan 15, 2012

I've just signed up to a local Irish Internet provider and was supplied with a Cisco router EPC3925. Wireless is working fine for laptop and iPad. However I cannot share my iTunes library with Apple TV. I connected the Ethernet cable and it worked perfectly. However as soon as I disconnect, so too does the home sharing. I've disabled windows firewall and completely uninstalled macafee firewall. Im using windows vista and have the latest version of iTunes installed.

View 1 Replies View Related

Cisco Wireless :: How To Connect One 5508 And 4402

Jan 16, 2012

I need to install one 5508 and a 4402 together to bring redundancy to a wireless environment.Can I do this?. What are the neccesary steps to perform this?, the idea behind this is to bring redundancy is the primary WLC falls for any reason.

View 4 Replies View Related

Cisco Wireless :: WLC 4402 Multiple Clients Can Connect To AP But Only One Gets An IP

Nov 4, 2012

I have a 4402 which is connected to a 4506 Switch int Gig 3/1 via a trunk port. The Managment and AP-manger interfaces are on vlan 6 [code] I have a 1142N AP also connected to the switch and it pulls a DHCP IP Address and configs etc and registers to the WLC. It too is on Vlan 6 and it is connected to the 4506 on int gig 4/33 which is an access port. [code] I am doing local authentication, so i have added users to the WLC.. My problem is that the first client that connected was able to get an IP address and connect to anything internal and external.I then connected another client on another laptop and that client could connect but not get an IP address, it  just self assigned.When i look at the clients i can see the MAC address of both Clients on the WLC, but doing a show mac address-table dynamic i only see the MAC of the client that works properly. The client that doesnt get an IP has no entry in the 4506 switch.I am stumped, from what I understand, is that the 2nd clients traffic is being trunked to the WLC , hence it has the MAC address. But I dont know why its not getting a DHCP assigned IP address.

View 37 Replies View Related

Cisco Wireless :: Connect WLC 4402 And Catalyst 6500 With LAG

Oct 5, 2011

Side Catalyst 6509 : cata6#sho running-config interface gigabitEthernet 8/15 Building configuration...
 
Current configuration : 224 bytes
!
interface GigabitEthernet8/15
switchport

[Code].....

View 6 Replies View Related

Cisco Wireless :: 4402 - Cannot Connect To Access Points AIR-LAP1142N-E-K9

Nov 13, 2011

I have a WLC of 4402 and AP's of AIR-LAP1142N-E-K9  . Where am getting problem of that users are complaining that they cannot connect it some times and they used to get disconnected in between.

View 1 Replies View Related

Cisco :: 4402 - Connect To Pppoe Server With Connection From Wireless Network?

May 23, 2011

We have WLC-4402 and LWAP-1510, we have issue when users trying to connect to pppoe server with pppoe connection from wireless network. On LAN, pppoe connection work properly and everything is normal. Also I enable broadcast fowarding on GUI but he problem still exist.

View 1 Replies View Related

Cisco Wireless :: AP1231 Cannot Connect To Either SSID

Jun 28, 2012

I'm trying to setup 2 VLAN's 1 for Native Traffic on my Corp network and another VLAN for Guest Wireless traffic.  I have attached the Config from my Cisco AP1231 and my Cisco 3750.  I have the AP plugged into port 24 on my switch.  I seem to have the VLAN's working fine.  I can get the AP1231 to broadcast both SSID's and the very first time i can connect everything seems to work fine.  after i power down my switch and AP i cannot connect to either SSID.  I get the message Not Connected. 

View 2 Replies View Related

Connect 2 Wireless Routers Different Ssid?

Apr 22, 2012

I have my all my computers, printers setup with a wireless network with dsl modem connected to linksys wireless router. I just signed up with comcast with another wireless router. I do not want to reconfigure all the laptops and printers with the new comcast wireless SSID. Is there a way I can connect the linksys router with existing SSID with the comcast router and using the internet speed of comcast. (note. will disconnect service with dsl)

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved