Cisco Wireless :: 5508 Slow Connection Rates 264kbps Download And 366kbps Upload
Feb 14, 2012
We recently did a forklift upgrade on our campus and installed 3502i's, 3502e's, and 11 5508 WLC's. Our students are complaining about slow connections in several areas of the campus.In our testing and basic trouble shooting our Apple laptops have no problems but our windows laptops are showing a very slow connection rates 264kbps downloand and 366kbps upload. The window device has current drivers installed.
View 14 Replies
ADVERTISEMENT
Feb 28, 2013
i recently switched from a wrt54g to a Cisco e1200 and my average torrent download and upload speeds went to 1200/kbps 100/kbps to around 200/kbs 0-1/kbps i got the latest firmware tried different channels disabled the wmm I've also tried wireless n only and wireless g only. I have no way to test the wired speed. I have a n adapter.what do i do.
View 9 Replies
View Related
May 13, 2013
Since we purchased our router in February, we've had intermittent problems with speed, and now it seems to be permanent. If we connect directly to the Comcast modem, everything is fine. If we connect to the router, directly or wirelessly, speeds drop to <3.
View 9 Replies
View Related
Apr 20, 2013
I Have BT Infinity and they are pushing 70mbps to my house ....i bought an EA6500 and i had real bad internet speed but amazing conection speed with my BT Home HUB3 ... 23Mbps with Cisco EA6500 and 68Mbps with my BT Home Hub3. I found out it was the Media Prioritization so just to be safe i reset my factory settings and made sure it was turned off. Just like magic i get the same now as the BT Home HUB3 .
View 1 Replies
View Related
Jun 30, 2011
After recently intalling the WMP600N wireless adapter I have had great trouble getting it working properly.
Current performance
- signal: verygood/ excellent
- download speed: ~1mb
- upload speed: ~2mb
- signal speed: 18-54mbps (lots of variance but never above 54)
Comparison to my laptop
Laptop in same location with wireless G capability
- signal: verygood/ excellent
- download speed: ~20mb
- upload speed: ~2mb
- signal speed: 54mbps
my router is a D-Link wireless N router I recieved from my ISP. I do not believe my router is to blame for this problem since I have a laptop with an inferior wireless adapter recieving 20X the download speed.Drivers I have installed the latest drivers for windows 7 and I am running windows 7 Ultimate 64bit.
View 3 Replies
View Related
Jul 7, 2011
i have WRT610N v1.0 with latest original firmware but ftp upload speed and torrent download speed is terribly slow.
View 3 Replies
View Related
Jun 28, 2012
After every attempt and changing of radios still download and upload was very slow.
View 1 Replies
View Related
Jul 29, 2011
I did a search and came across this board because I too am having the same issues with wireless connection. I went as far as buying a new router, which like the original post stated, worked well for a few and then stopped. It's frustrating because I need the wireless connection for many items I use at home.
View 2 Replies
View Related
Feb 9, 2012
I'm having really slow speeds surfing the internet, watching videos on sites like youtube, and downloading files. So i went to [URL] and found that my download speeds are only 1.3 mbps!! my upload is fine, around 5 mbps.I am wirelessly connected to the router, but the signal strength is fine.
View 2 Replies
View Related
Aug 17, 2012
We recently bought a home and just moved in. That being the case, we got a new ISP (Cincinnati Bell DSL). The service is advertised as "Up to 5Mbps."
My current equipment:
PC:
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
[Code].....
So what can I do to achieve faster speeds? Am I limited by the hardware I have? My Dell is roughly 6 years old. Am I limited by Cincinnati Bell? Is it the location of the wireless router? Are there settings I can adjust to create a faster connection?
View 6 Replies
View Related
Jan 11, 2011
Recently my desktop has experienced very slow download speeds (~0.11 Mbps), however the upload speed appears to be in line (~2.0Mbps). These numbers are taken from Comcast's speed test (my ISP). It is obviously a problem with my PC because everything else on the network (PS3, Laptop) have great signals with no problems. I just recently reverted the Desktop back to its factory state, and everything was working fine for a couple of months. The desktop in question uses Vista 32-bit and the Belkin Basic USB Wireless Adapter.
View 1 Replies
View Related
Dec 26, 2011
Is it possible to use Cisco Band Select on a Cisco 5508 WLAN controller and still disable the 802.11b data rates?
View 2 Replies
View Related
May 21, 2011
E4200 with an external hard drive WD My Book (1TB) connected to the router via USB.Desktop PC (Windows 7) connected to router via Ethernet cable.Laptop PC (Windows 7) connected to router via wireless connection.I wanted to create a central media (videos/pictures) file on the external hard drive connected to the router. However, the transfer rate is terribly slow. Interestingly, it is 50KB/second when copying from the Desktop (via Ethernet) and 1.6Mbps when copying from the Laptop via wireless.
View 9 Replies
View Related
Mar 17, 2011
I live in the tampa bay area, I have bright house (BHN) as my service provider, which provides a Road Runner Lightning (40/5) package. I previously used BHN's top tier (20/2) back in July (and prior) with no problems.
After converting to Lightning in August of this year (2010). Of course, BHN (and every other provider) wants to force a modem/router down your throat, so I had them bridge it (in short, turn it into a dummy modem with no routing). I had an SMC branded modem gateway at the time. I work from home 2 days a week (so I can spend more time with my kids during morning, lunch, right after work) and this requires me to use QoS to ensure my VOIP work calls don't get dropped, if the family is watching youtube videos or watching netflex.
My network was as follows SMC Modem >WAN IP>>WAN Port>>D-link DIR-655>>Switch Ports>PC1, PC2, PC3
Everything seemed fine (from a usability stand point) till about 2 weeks ago when my upload speed seemed to grind to halt. Normally I was able to upload about 200-300K per second, and I noticed this dropped to about 45K per second during a drop box upload. First thing I did was power cycle both my modem and router (in the proper/usual order). After they both come up, I start using speed test to find out what my upload speeds were. I was getting about 39Mbps down, but only .56Mbps up still. I factory reset my router.... test, similar speeds. Power cycle all computers (just in case), and then modem/router. Tested, similar speeds. Updated the firmware to the latest. Same issue
Called BHN customer service, they factor reset it, but it wasn't in bridge mode. If I by passed the 655, in factory mode (non bridge mode) upload speeds returned to better than expected states. If I bridged the cable modem, upload speeds seemed to crash.
Had BHN replace the modem, seemed fixed for a day, then issue came back. Had them come back out and replace it again, this time with a Motorolla Surfboard modem... same issue. Fine during factory reset, however after they bridge the modem, upload speeds were fine. Told BHN I would take it from there.. Connected up the DIR-655, and upload speeds crashed again. (.6Mbps). Called D-Link Support, and the Chinese English speaking rep seemed to not be listening to me and tried to have me adjust my MTU as well as Wireless settings. Long story short... the rep was a level 0 id10t and I hope D-link will consider hiring better employees/contractors. So I was all about to give up and replace it with a DD-WRT capable router (which it takes me a lot to want to swap hardware), when I discovered the wan shaping was on. Which I thought to myself... nah... QoS has never messed up before... why would it be the cause. Turned off wan shapping... and voila. Issue seemed to be insta-resolved.
Unsatisfied with that... I decided to dig a lil deeper. I turned on Wan shaping again, but decided to set the settings manually instead of auto detect.
Here are the settings I used... (Advanced Tab>QoS)
Enable Traffic Shaping - Checked
Automatic Uplink Speed - Unchecked
Manual Uplink Speed - 5000
Connection Type: Cable or Other Broadand Network
Enable QoS Engine - Checked Automatic Classification - unchecked (this checked seemed to affect my upload speed by about 5-10% during testing) Dynamic Fragmentation - unchecked (this checked seemed to be the worse enemy for upload speed)
While I know I'm not any network guru (still have to use a subnet calculator for subnetting), I think I did a pretty good job drilling down the issue (once I got passed my service provider replacing modems).
Anyways, I've had overall good luck with D-Link products, even have a 5 port 10/100 switch (all metal) from 1998 that works great. Hopefully, D-Link will just either put more documentation on the web, or hire better employees.
View 3 Replies
View Related
Oct 23, 2012
im experiencing very slow transfer rates averaging 600 kb/s when transfering files. my PC has a compatible dwa-552 card and both the router and card have latest drivers / firmware. i have various changes on the router and to no avail. all devices PC / laptops running N @ 20 mhz / channel 11. i can see 2 other networks but very low signal using diff channels.what setting might i be overlooking in the router that might cause this slow trans rate? incidentally, when i transfer .jpg or .pdf files the transfer improves to 2.5 mb/s. however, when i transfer a folder containing subfolders with diff file types the trans rate drops sharply to 600 kb/s.
View 14 Replies
View Related
Oct 12, 2011
Hardware Software profile;
Laptop - Windows 7
Desktop - Vista Ultimate SP2
Router - Cisco Linksys E3200
Cables - CAT6
I am a sales engineer, so I use my desktop and laptop all the time. When on road, I sync my desktop with my laptop using a program called ViceVersa. This a very good, reliable syncing program that I have been using for over 10 years ( with upgrades ).
The program allows me to sync my desktop and laptop. The program also shows the data transfer rate during the syncing process. The typical data transfer speed is between 5MB/s and 10MB/s with sometimes up to 12MB/s. A typical sync between the computers will take about 3 - 5 minutes at the ~ 10 MB/s transfer rate using ethernet CAT6 cable inteface. At about 11pm last Tuesday,there was a Windows update on both my Vist and Win7 computers. On wednesday, I went to do a typical sync. The system has dramatically slowed to 59KB/s max. This is about 150 times slower than 5-10MB/s that I was used to for so many years. My typical sync was now taking about 2 hours....unacceptable ! I have tried everything to figure out what is going on and how to fix it but nothing has worked.
Then I tried to see what would happen if I disconnected my ethernet cable ( between the router and the laptop only ) and just sync using the wireless network. With that configuration, the transfer rate is ~ 2.5 MB/s which is not great but is much, much better than 59KB/s. I actually do not know what a reasonable wireless transfer rate should be since I never really did it before due to the faster speed of the wired configuration.
This is just a LAN. Only connecting my Desktop to my Laptop via the Cisco router.
How I can get my wired configuration back up to the 5-10MB/s transfer rate that it once was?
View 2 Replies
View Related
Apr 29, 2013
I have a device manufacture there are requesting the following change on a customer's WLC 5508.
-config advanced eap identity-request-timeout 60
-config advanced eap request-timeout 60
I have studied many guides but I can't find out if there is a down-side to setting the timeout this high.Could it result in slow roaming or re-authentication if there is a connection error? The customer have large areas with high client density and some outdoor areas with low client density.
View 3 Replies
View Related
May 25, 2012
When I download stuff, Skype, Minecraft mods, youtube videos. It always downloads aroung 100-400kb/s My freind thought it was just the dl server that was slow, but I've tried different downloads from different sites, and they all have the same speed.Using Netgear router, default settings, WIRED, Google Chrome.
View 1 Replies
View Related
May 28, 2012
I have a Linksys E1200 router, which replaced a Linksys WRT54G wireless router. The WRT54G ran perfectly, but did not support wireless N, so I replaced it with the Linksys E1200. The router is physically located in a good spot, up high and centrally located in my house.Problem is, my download speed on my android tablet, xBox, iPhone is very slow, yet my upload speed is screaming fast.
Wireless: Ping: 30ms, Download 1.93Mbps, Upload 6.27Mbps.
Wired: Ping: 14, Download 17.88 Mbps, Upload 6.7Mbps.
I've changed channels on my router, changed channel width. Connection type is DHCP. My security is WPA2. I use the wireless MAC filter (allow only these MAC addresses access). No parental controls, I don't use port forwarding or triggering, and my firmware is up-to-date. why my speed changed from the older router to the newer router?
View 5 Replies
View Related
Jan 23, 2013
is there a way to restrict the upload and download of computers on a wireless network (or at least get the router to favor one computer over the others?)i have a tp-link TD-W8960N router and the computer i need the extra bandwidth on is connected to the router via cable
View 3 Replies
View Related
Sep 12, 2012
WRT160NL exchange download and upload speeds.Before the router everything is fine, then it wireless or Ethernet port occurs above situation.No difference what firmware it is (1.0.02, 1.0.03, DD-WRT...)
View 7 Replies
View Related
Nov 8, 2012
Region : Romania
Model : TL-WDR4300
Hardware Version : V1
my Wi-fi card is an Intel Centrino 130N. When I connect to the Internet directly, the speeds I get are: DL: 11 MBs and UL: 9 MBs. (I know the difference between MB and Mbits). Although, when I'm connected through wireless, I get: DL: 3.4 MBs and UL: 4.7 MBs.how do I get my DL speed to be higher than the UL speed in wireless mode ? I read somewhere I have to disable QoS and WMM, but I simply can't find that option in the router's settings. even if I am in the same room as my router, when I check the status of the wireless connection, the maximum speed is 72 mbps. Should that be 130 mbps, as I run it in N mode, not G? How to improve that ? I have Win 7 and all the latest drivers and everything.
View 3 Replies
View Related
Jan 8, 2013
I have WLC 5508 in my office and i am asked to backup file configuration from WLC but when i remote WLC to get the upload configuration file via tftp it doesn't work.
But when I try to use direct connection ( point to point ) with WLC and my laptop i can get the upload configuration file. is there something wrong, actually i have connected with that WLC i can ping and telnet that device
View 8 Replies
View Related
Nov 13, 2012
I upgraded my old router to a Linksys E1200 about 2 months ago. Like others with Comcast, I now have a lot slower internet speeds. I've updated everything, disabled WMM. I'm still getting slow speeds. My download speed is 3.12, which is not that bad for me. However, my upload is just below 1.
View 7 Replies
View Related
Dec 9, 2011
About 2 months or so ago, my upload speed just pretty much stopped working. Nothing changed with my PC/modem/router, so I don't know what happened. My download speed is FINE, fast like it's always been(over 20 Mbps). I can upload a file maybe 500KB or lower, but it takes several minutes. If I try to upload anything bigger, it doesn't work(errors/gets stuck).
It's not my PC because I have the same problem on my tablet and ipod. It's not the router because I tested it by just hooking up the modem directly to my PC.
At speedtest.net, it just gets stuck on the upload test and never gives me results.
I rent my modem from Comcast. Should I just bring this modem in and get a new one?
View 7 Replies
View Related
Dec 1, 2011
How much faster is a T1 (1.5 Mbs) link vs. a 128Kbs link? Is it as simple as dividing one into the other which would equal roughly 11 times faster? What will this look like for the user who goes from 128K one day to a T!
View 1 Replies
View Related
Jul 11, 2012
I bought an E2000 router as a replacement for my WRT54G router, since my internet speeds had been upgraded. But this E2000 router has been giving me nothing but trouble.
Wired through both the router or modem, I get my topspeed of 110mbps. However, as soon as I switch over to the wireless N function, my speed drops to only 25mbps. As far as I know, wireless N should have a much faster speed than that. Even my old WRT54G had faster speeds than this new router has. Mind you, that the distance between my laptop and router is about 3 inches away. The further I go away from my router, the speed exponentialy drops (20 feet, and the speed even drops to below 10mbps). Even with different laptops that have completely different wireless cards. Now honestly, I have tried EVERYTHING to get the speed up. Both 2.4 and 5ghz, 20mhz only, 40 mhz only, different channels (currently the router is in channel 11, being the only router in that channel), setting the network to G-only. I tried changing the Beacon interval thing in numerous settings, I even tried changing the MUT. Firmware is completely up to date. I have also tried placing the router on a completely different place, to make sure there was absolutely no interference (tough that shouldn't be an issue if my laptop is only 3 inches away) I tried changing the security mode to something different than WPA2/AES.
Nothing worked, if anything, it made it worse in some cases. I have litteraly tried every option I could find online, except for trying a third party firmware like DDWRT, which worked excellently for my old WRT54G, though I read that speeds can't be improved on this E2000 with a third party firmware.
Is there anything else I can do, or should I assume that my router is defective?
When I'm in my bedroom, I get a very poor connection and my speed drops to about 0.25mbps. Abysmal, so I bought a WiFi range extender to get me a better signal. It works, and it allows me to get a speed of about 5-6 mbps, without dropped connections. Still slow, but at least it works. The weird thing is, wired through my router or modem, I get about 9mbps upload speed. With this extender, I get the same 9mbps upload speed in my bedroom, though only 5-6 mbps download speed. You'd think that the upload speed would drop simultaneously with the download speed. How can my upload speed be higher (maxing out) than my download speed? I wonder if my transmitting antenna of my router isn't defective.
View 9 Replies
View Related
Dec 3, 2012
Region : Romania
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version : Latest
ISP :
i just bought this router, all good until i had to upload wireless over ftp or samba. It is version 8.2
Firmware Version:
3.13.27 Build 120802 Rel.51024n
Hardware Version:
WR841N v8 00000000
I bought this router for the advertised 300 mbs, my last 150 router was giving me 6/7 mbs over wireless upload on ftp. Tp link router is giving me 800 k.
Download works on wi fi , i got 9,3 mbs from a 150 N adapter.
I tried all security options , even mac filtering . And i am trying to ftp over network , not the internet.
View 6 Replies
View Related
Apr 14, 2011
I have a synchronous 10 Mb connection to my isp which I have conneted to a CISCO asa 5510. I have done a lot of testing and there is a very noticable difference in my upload/dowload speeds.When I connect a laptop directly to the Cable from my ISP's equipment and have the NIC set to autosense, I get similair results for Download/Upload Speeds I have tested and get 9 plus down and 8 plus up.When I either connect the asa directly to this cable and set to either 100/Full or autosense OR I place a non-managed switch in between the asa and the ISP's equipment My upload speed drops dramataically. The Download speed stays about the same 8 Mb Plus but my upload falls off the face of the earth drops to about a 1Mb. I have noticed this many times when I am going from a cisco 800 series router to a Cisco ASA.This is severely limiting my ability to perform replication out from my locale.
View 7 Replies
View Related
Mar 1, 2013
I just acquire the RV042.We have a DSL [WAN1 :download good, bad uplaod] and an SDSL line 4MB OVH [WAN2].
Receive all downstream traffic to WAN1Send email upstream traffic to WAN1Send upstream traffic to OVH and guarantee good bandwidth to 10 TSE access and webex traffic
I built the following rules:
The problem ... nothing works ... the downstream traffic comes from WAN2 and upload on WAN1 or WAN2.
View 1 Replies
View Related
Sep 30, 2011
download is now 25.24 up is 3.97 should this be corrected?
View 1 Replies
View Related
May 29, 2012
am not a network expert but I understand that the download speed is always higher than the upload speed, right? I just bought a new internet package that comes with 5 mb/s download speed. The Upload speed should be around 1 mb/s right? Speedtest.net gives me 5 mb/s download speed and 53.62 mb/s upload speed. I called my internet provider and the girl told me it is normal. How can that be normal? I also have another weird issue. When I try to watch a video (youtube, netflix, etc...) the video starts loading correctly but stops loading after 10-15 seconds. I did a download test by downloading Itunes and the download starts correctly at 600 KB/s but after a 2-6 seconds, the downloaded megabytes stop increasing and download speed just drops until it reaches 0 and the download cancels itself.
View 6 Replies
View Related
Oct 8, 2012
I am facing with internet download speed reduced to 1/4th (500kbps) of promised speed (2Mbps).
ISP: Tikona India Type: Wireless unit at roof connected to PoE and ethernet cable
OS:Win7 and ASUS Express Gate I am using the ISP for over a year and was happy but for past 1 month got issues.
The first service engineer came and changed the poer adapter, clipped the ethernet LAN cable. The AI NET 2 utility in BIOS showed the pair 1-2 and 3-4 are short. So second service engineer changed the cable, power adapter and router.
I hoped that things will get resolved but still the speed was slower so the enginner unplugged the LAN cable from my desktop and checked the speed in his laptop. He was getting 2.5Mbps. Then I checked in safe mode with networking and asus express gate but still got reduced speed from 500 to 600kbps.
I had a NIC replacement so tested with that also and got same reduced speed.
View 2 Replies
View Related
