Cisco Wireless :: 5508 WLC Redundancy - Regional / Centralized Model?

Feb 20, 2012

Our organization has multiple controllers at regional sites (one per region) & want to implement redundancy by placing one controller at headquarter's datacentre as a backup in case the site's failed.All our controllers are 5508 with 7.0.116.0 loaded I did a search around and found multiple documentations of how to do it but all related to creating a mobility group?Is it possbile to implement this scenario without creating mobility group ? (As in Cisco docs for software release 7.0 June 2010 - quoted "Centralized and regional controllers do not need to be in the same mobility group" ) 

View 1 Replies


ADVERTISEMENT

Cisco Wireless :: 5508 WLC Redundancy With Prime

Jan 20, 2013

We are going to implement high availabilty in 5508 WLC with version of 7.3.101 . We will be using Prime infrastructure 1.2 for monitoring purpose.With Prime, whether we can monitor and manage redundant WLC also or only active WLC?.

View 3 Replies View Related

Cisco Wireless :: 5508 - WLC Redundancy - Disaster Recovery?

Mar 14, 2013

My questions is in relation to disaster recovery, for wireless.  We have our main data center, in the US, with two 5508 controllers.  We have a DR location, in Europe, with two 5508 controller.  We're upgrading our 5508's to the 7.4 code, so that we can take advantage of the RP port for our controllers.  With that said, is there a way to make the US and Europe controllers redundant?

If there's a disaster, in the US, would the AP licensing, and AP's attach to the European controllers?  Our AP's are set up with HA.  I'm more concerned about the licensing flipping over to the DR controllers.  I've tried researching this topic, and can't really find anything on it.

View 4 Replies View Related

Cisco Wireless :: WLC 5508 Running Version 7.2 - Redundancy

May 1, 2012

I have 2x WLC 5508 running version 7.2. 1st one is setup and running.  My questions is: If I want to setup Active-Passive redundancy, do I need to manually setup the 2nd one exactly as the 1st one and put them in the same group? Or is it a way to copy all of the configs I made on the 1st one over to the 2nd one?

View 4 Replies View Related

Cisco :: Setting Up Primary And Secondary 5508 Using Redundancy Port

May 15, 2013

Management purchased a HA package from Cisco consisting of 2 5508's with pre installed 500 users license on the Primary WLC and none on the secondary WLC. We have 5508's already so I am familiar with setting them up and so forth. What I am not familiar with is setting them up using HA for failover and license sharing. I've looked and looked and can't find documentation online showing how to set this up. I have found some but nothing that is complete. I have spent 2 days spinning my wheels.

View 2 Replies View Related

Cisco Wireless :: Several Remote Sites And Centralized WLC5508

Nov 8, 2011

I have been asked to setup wireless and we have purchased WLC 5508 and 1142 APs.We have several remote sites and a  centralized WLC.  The requirement are to have a common SSID  (Corporate) advertised across all the remote sites and have that SSID locally switched, and have another two SSID Guest and Mobile tunneled back to the central site (WLC).I want all the wireless (Corporate) clients to use the same subnet as the wired clients at each remote site, the IP assigment will be done by a DHCP server at the central site. The Guest and Mobile users will use a common subnet each across all the site and this will also be handled by the DHCP server at the central site.
 
I have enabled H-REAP with Centralized  Authentication and Local switching but I'm not sure about the second  part which is to have a common SSID (Corporate) across the remote sites and localy switched whilst having the other two SSIDs tunneled back to the WLC. Cisco TAC told me to configure dynamic interfaces for each of the remote site but then he said I still wouldn't be able to switch the Corporate traffic localy if I use a different subnet to the wired subnet for the wireless clients.

View 12 Replies View Related

Cisco Wireless :: WS-SVC-WISM-1-K9-D Centralized Forwarding Card

Feb 10, 2013

What this card is and what is it used for?
 
from show module command, it appears that it is a sub-module of the wism blade.
 
what is it's primary function?

View 1 Replies View Related

Cisco Wireless :: Bonjour Not Working - Centralized WLC5508

Mar 24, 2013

I have the attached diagram and I followed the instructions from another posts / forum cases and the Apple TV is still not working.
 
My questions are:
 
1.-The WLC controller and AP must be in the same subnet?. This is not my case, the AP 3500 is operating in a remote location and I have a centralized WLC 5508.
2.- I already configured the Controller --- > General --- > Broadcast forwarding (enable) + AP Multicast Mode (Multicast / IP: 239.20.226.197).
3.-I already configured the Controller --- > Multicast ---- > Enable Global Multicast Mode (selected) + Enable IGMP Snooping (selected) + Enable MLD Snooping (selected). Please see the attachment.
4.-Do I have to configure something in the Mobility Management --- > Multicast Messaging --- > (Enable Multicast Messaging + Local Group Multicast IP Address) ?????
 
The  Apple TV Device and Ipad are authenticated in the ISE using certificates with no issues and both got IP's from the DHCP for the WLAN Vlan assigned to the SSID activated (see pictures attached).

View 11 Replies View Related

Cisco Wireless :: 4404 / Remote Mesh AP With Centralized Controller?

Jan 2, 2010

we are in the midst of designing a wireless Mesh AP solution for our customer.
 
Customer Requirement:-
 
1. Customer wants to deploy REmote MEsh APs (1500 Series) with a centralized 4404 Controller at HQ site.

2. The Remote and HQ site is linked thru a leased line with 2 routers in between
 
Based on cisco's document REAP and HREAP is not supported in LWAPP Mesh APs. So if the Mesh APs were to be deployed at Remote sites (3 total). How this be achieved?

View 4 Replies View Related

Cisco Wireless :: Associate Non-root Bridge Model 1310 To Root Bridge Model 1400?

Apr 24, 2012

Can I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of?

View 7 Replies View Related

Cisco Wireless :: 1142n What Model Of WLC Should Choose

Jul 10, 2012

I been using 1142n Autonomous several times.Now i have new requirement to setup 12 LAP 1142n, using a WLC.Can suggest what model of WLC should i choose?? About 30 users, in a cargo warehouse invironment.Now it is a good time for me to learn & play around with WLC.What else should i need in order for LAP & WLC to work??

View 7 Replies View Related

Cisco Wireless :: Management Model Of WAP121?

May 13, 2013

I'd like to know if WAP121 can be centrally managed by WLC, such as CT5508.

If WAP121 cannot be centrally managed by WLC, is there any way to minimize operation work to manage WAP121?

View 2 Replies View Related

How To Find Out Model Of Wireless Card

Mar 26, 2011

I have just reinstalled windows vista on my dell inspiron 1318 and now my wireless is not working. I think I might need to reinstall the driver for my wireless card but how do I know which driver to install.

View 2 Replies View Related

Cisco Wireless :: 1242AG - How To Find Out Model Of Antennas

Feb 25, 2013

I have an existing 1242AG AP in a remote location, I have full access to it.  I have a new 1242AG that was ordered but the client forgot to order antennas for it.  Is there a way I can find out the exact model of antennas that are connected to the in place AP at the remote location??

View 2 Replies View Related

Cisco Wireless :: 1130AG Series - AP In Autonomous Supported Model?

Feb 16, 2013

what are the series of access point that are supported without WLC. anteena should be in built and capability link 1130ag series.

View 9 Replies View Related

Linksys Wireless G Model WMP54GS Not Connects To The Internet

Feb 5, 2012

I just did a fresh Windows XP install on my desktop. I've been trying the past couple of days to get it to connect and it has randomly connected online sometimes but most of the time it won't connect. The times it has connected to the internet it has been fine, but then it will disconnect and won't reconnect.

View 13 Replies View Related

Linksys Wireless Router :: Change Old By Model E2500

Jan 4, 2013

I want to change my old router (wrt160N v3), by this model Linksys E2500.The question is, there will be a lot of changes improvements if i do this upgrade?

View 2 Replies View Related

Cisco Wireless :: What 113X AP Model Will Work In Autonomous And Lightweight Mode

Feb 4, 2013

What 113X AP model will work in Autonomous and LightWeight Mode? I want to buy some 113X AP's for my lab and want to make sure I don't get stuck with the ones that only run in one mode. I am looking at buying this one AIR-AP1131AG-N-K9 802.11a/b/g. Will this model work in both modes? 

View 1 Replies View Related

Cisco Wireless :: 1552 RAP-to-RAP And Maintain Redundancy With Connection To WLC

Feb 26, 2013

I need to know if i can connect RAP to RAP and maintain redundancy with connection to WLC.
 
I have one 1552 with the gigabit ethernet connected to the gigabit ethernet to another device that has a point-to-point link with another device where have a ethernet connection with a switch in the same broadcast domain where i have my WLC.
 
Next to this 1552 i have another 1552 that have the same situation, both with omnidirectional antenna.
 
I would like to have a Mesh connection with these two 1552 in 5Ghz, because if some point-to-point link is down i need redundancy to the WLC and my network, because i have some clients connected in the 2.4 Ghz in both Access Points.

View 4 Replies View Related

Cisco Wireless :: Redundancy - HA License For 2504 (AIR-CT2504-xx-K9)?

Jun 2, 2013

tell me when is available for order the High Availability  for AIR-CT2504, like:

     AIR-CT7510-HA-K9           Cisco 7500 Series High Availability Wireless Controller
     AIR-CT5508-HA-K9           Cisco 5508 Series Wireless Controller for High Availability

View 1 Replies View Related

Making A Wireless Connection From Broadband Router Model Td 8816?

Feb 27, 2012

making a wireless connection from my broadband router model td 8816?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: Model Firmware Compatibility For TL-WR1043?

Nov 9, 2012

Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 100820
ISP : UPC

I intend to upgrade my TL-WR1043N router in respect of firmware. Your available firmwares are targeted to TL-WR1043ND types only.Are they compatible or you have different firmware for TL-WR1043N ?

View 5 Replies View Related

Linksys Wireless Router :: WRT100 Model Is Compatible With Windows 8?

Feb 28, 2013

Does WRT100 model is compatible with Windows 8? Everytime I connect my laptop all the other devices drop their connection.

View 2 Replies View Related

Cisco Wireless :: Does 2500 Series Controllers Support Redundancy

Apr 12, 2012

Does 2500 series wireless controllers support redundancy?

View 1 Replies View Related

Cisco Wireless :: 44xx / 55xx - Anchor Controller Redundancy

Sep 23, 2012

I am in process of replacing our 44xx controllers with new 55xx controllers.  During the upgrade, I would like to add redundancy to our guest controllers that reside in the DMZ and had a question about regarding the setup.
 
If I remember correctly, I would place both guest controllers on the same mobilty group, and then add both of the controllers to the foreign controllers. The foreign controllers will form mobility with both anchors, but choose the one with the lowest MAC address as primary.  On the foreign controller, if the lowest MAC addressed anchor controller does not respond, it will connect to the second controller.  Is that still true? or is there a better way to go about it?
 
Also, I was wondering, do I need to put different guest network ranges on each of the Anchor controller? or can I use the same exact range on both anchor controller (since if a controller goes down, the clients would be reconnecting to the second controller anyways?)
 
Any best way to setup redundant Anchor (guest) controllers).

View 22 Replies View Related

Linxys Wireless-N Broadband Router - Model # WRT160NVZ Stop Working?

Feb 24, 2011

After an hour on the phone with the Linxys support people I'm feeling like I've been scammed.I have a 2 year old, almost to the day, Linxys Wireless-N Broadband Router, model # WRT160NVZ, which decided to stop working today. I contacted Linxys support and was told since it is 2 years old it's no longer under warranty, ok. If I choose I can pay for a service call and the tech may be able to fix the router, no guarantee. I had another option to purchase a service plan but again no guarantee repairing the router. My third option was to purchase a brand new wireless router for a discounted price, if I chose this option the tech would attempt to repair the router at no charge. I expressed my concern that it would take a few days to receive the new router and what would I do while waiting. I was then assured the router I have now could be repaired and would be able to hold me over until I received the new router.So I chose the 3rd option purchasing a M20 wireless router to be shipped to me within 3 days. After providing my credit card number and billing/shipping address the technician was now able to work with me in trying to repair the current router. He had me access the Linxys website, he instructed me in resetting the router and resetting the settings for it on the website and PRESTO, my 2 year old router now works again.but feel that this is a scam, programmed in the router to occur within 2 years of purchasing where the settings entered no longer work but once changed works perfectly well.

View 6 Replies View Related

Wireless Adapter Disappears Whenever Turn Off The Asus Model U56E Laptop

Mar 1, 2013

I have an Asus Model U56E. Recently the wireless has been disappearing whenever I turn off my laptop. What I mean is that when I turn on my laptop, the wireless doesnt seem to exist. I go under device manager and all I have is the eternet and my bluetooth device. About 85% of the time, when I go under "action" and click on "scan for hardware changes" the my Intel(R) Centrino(R) Wireless-N1030 will show up along with the Microsoft Virtual WiFi Miniport Adaptor and I'll get my wireless back. However, when my laptop turns off, the same thing happens.

In addition, my fn F2 button no longer seems to work. I'll press on it and majority of the time my light that signals that the wireless is working does not turn on. Most of the time it stays off whether or not I am connected to the wireless

This is what I already attempted to fix it, based on googling for answers:
1. Under the properties of my wireless and miniport adapter, I went under power management and unchecked the box that says "allow the computer to turn off this device to save power"

2. I went to my laptop's power plan and changed all my wireless adapter settings "power saving mode" to maximum performance for both battery and cord

3. I went to the intel website, had it look at my laptop wireless system and followed their recommendation of installing an updated wireless software thing. All that happened was that it told me to disable my old wireless and then install it. However, even though I followed their instructions, it continued to repeat the same message. I had to perform a system restore to get my old wireless back

4. I disabled wireless console 3 (by Asus) under programs and it seemed to work. My laptop was getting connected whenever I turned it on. However, the next day my laptop updated itself (b/c of my system restore) and I am back to the same situation except my wireless console is still disabled.

View 19 Replies View Related

Linksys Wireless Router :: Incoming Connection On 80 Port Model E1500?

Aug 26, 2012

My firewall outpost detected incoming connections on port 80 and blocked them.I think that the router must block incoming connections on port 80, right? But it does not.
 
[URL]

View 5 Replies View Related

Linksys Wireless Router :: Unable To Connect Visio TV Model E3D320 To It

Mar 9, 2013

I am unable to log in to my wireless network with my TV. It worked with my old router but the EA4500 recognizes the network but will not accept the password. Even if I open up my guest network which is not secured by a password it will not connect to my home network. I've chatted with Cisco and Visio on this problem and Visio says it's an encryption problem with the router. Cisco wants me to have someone call me who charges for tech repairs.

View 9 Replies View Related

Linksys Wireless Adapters :: Best Wifi Adapter For Cisco Model Dpc3925 Modem / Router

Apr 16, 2012

have received an Cisco Model DPC3925 modem/router from UPC (provider in the Netherlands) and they allow me to have 120Mbit connection, but with my own WIFI Adapter I only received between the 40Mbit/60Mbit speed. My question is the following; Wich WIFI adapter is the best adapter for my Cisco Model DPC3925 modem/router?The distance between the modem/router and my pc is not that much. And when I use an cable the connection is between the 90Mbit/110Mbit. The WIFI adapter that I now use is the: TP-Link TL-WN881ND. I was thinking to buy a Linksys AE1200, but I dont know if that adapter is much better then I already have.

View 6 Replies View Related

Linksys Wireless Router :: EA4500 Incorrect Manufacturer And Model For Connected Device

Sep 14, 2012

I have several devices connected to my Linksys EA4500. Two of them are my Apple Mac Pro and my Logitech Squeezebox Radio. For some reason, in 'Device List', my Apple Mac Pro has the manufacturer 'Logitech' and the model 'Squeezebox Radio'. As for my Logitech Squeezebox Radio, it doesn't have a manufacturer nor a model. It appears that there is a mix up with these two devices. I have cross checked the IP addresses and MAC addresses displayed in Cisco Connect Cloud with those displayed on the devices and they match - so it's not a case of mixed up names. Could this be an issue with Cisco Connect Cloud?

View 1 Replies View Related

Dell :: Inspiron 1545 Model PPHL / Wireless Capability Switch Is Turned Off

Apr 30, 2012

I have a Dell laptop Inspiron 1545 model PPHL that will not connect to my wireless route.  I know the wireless router is working because I call connect to the internet using my Gateway laptop.  I'm getting a message that the (Dell) wireless capability switch is turned off.  I've been unsuccessfull in my atttempts to turn it on.  how to turn the switch on? 

View 1 Replies View Related

Cisco Wireless :: 6500 Configure Mobility Groups For Guarantee A High Availability / Also Redundancy Of Controllers

Mar 24, 2012

What consequences could i have if i install a WiSM-2 module into a pair of 6500 configured in VSS and another WiSM-2 module into other pair of 6500 configured in VSS for serving a 300  APs??...in this case, do i need to configure mobility groups for guarantee a high availability and also redundancy of controllers?Under the best practices, is much better having the two WiSM-2 modules into a single pair of 6500 configured in VSS??

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved