Cisco Wireless :: BR350 - Way To Connect 5 Buildings?

Jun 4, 2003

1) I have 5 buildings

2) They can not see to each other

3) But they can see a mast in a mountain

4) Distance between buildings and the mountain is 3 km
 
Question is...
 
How many BR350 do I have to use?How many and what type of antennas do I have to use?

View 5 Replies


ADVERTISEMENT

Cisco Wireless :: Connect Two 2960 Switches In Two Separate Buildings?

Feb 22, 2013

I am having a problem in connecting two Cisco 2960 Switches between two different buildings using Cisco WLC 2504 & 3 Wireless 1552S APs.
 
- One AP is directly connected to Switch - 1 where WLC is connected and serving as a RAP

- Another one is working as Mesh in the field.

- Third one is a Mesh Access Point wired to another Switch - 2. (Bridging is enabled)
 
All the APs, WLC & switches are in the same network 10.3.x.x subnet mask : 255.255.240.0?WLC is working with default management interface whereas switches are having VLAN1 configured as default VLAN.All the port for the switches are Trunk ports?Once i am trying to ping the RAP or any MAP from Switch - 1 I am sucessful but once i am pinging Switch - 2, its not replying. Similar is that case from Switch - 2 side.

View 1 Replies View Related

Best Way To Connect To Buildings Free Wi-Fi Asus RT56N

Feb 27, 2013

I've been in a home office for the past 2 years with 30mb internet, but I will be getting an office soon downtown. The building I'm moving into has free wifi, what is my best option to connect to this with my desktop?

1. Using an ethernet cable from my desktop to my ASUS rt-56n router as a bridge to connect to the buildings wifi.

2. Buying a wireless adapter to connect to the buildings wifi.

My phone only gets 2 bars when connecting so I'd like to know which of the options above will give me a faster and more reliable connection.

View 7 Replies View Related

Cisco Wireless :: WAP4410N Stops Responding Between Two Buildings

Sep 21, 2010

I have 2 of these in a Bridge between 2 buildings.  Cisco support replaced them with 2 BRAND NEW units after 6 weeks of waiting, that do the same thing.  Spent so many hours on these turds it is insane. the thing goes down with the wind, tinker with it and maybe you will be up for a few hours or days then back to down again.  Thinking it has something to do with the firmware or a power saving thing.  Works great when it is up though.  I am still trying stuff to get it to work stable. To much money invested in them now to start from scratch but they wanted budget equipment in place and not Cisco Aironet.

View 3 Replies View Related

Cisco Wireless :: 1262 / 3500 For WLAN Between Buildings?

Jul 4, 2012

I currently have WLC 5508 and a few campuses with LAP 1142, each with 2-3 vlan. Now one of our campuses have a building thas is a bit far away and needs network (wired). We can't get fiber or TP-cable there in a good way. So the plan is to get two 1262 or 3500 with AIR-ANT5160NP-R antennas and get a wireless link working between the campus and the building. And then connect one of the AP's to a switch in the other building to provide it with wired network.
 
The problem is that I can't find information on how to do it. Should both APs be in autonomus mode? I probably only need to have 1 VLAN in the other building but I am not sure yet. Is there a problem with transfering several VLAN over the WLAN-link?

View 3 Replies View Related

Cisco Wireless :: BR1410A Bridge Throughput Between Two Buildings

Mar 15, 2012

I have 2 - 1410 bridges ( point to point) between two buildings approx 600' apart. They seem to be aligned well ( Signal -52dBm, SNR 41 ) and have been very reliable. However, I cannot seem to run more than 26Mbps thru them.is there any recommended tweaking that can increase my throughput ?

View 2 Replies View Related

Span LAN 660 Feet Between Buildings?

Oct 15, 2012

Two buildings on same farm property 660 feet apart. Cable internet to one building does not reach 660 feet to second building and the cable company will not put it in. Wireless between the buildings is not out of the question; but, I've never done anything this distance before and I am concerned that signal loss over 660 feet might degrade throughput.

So, what is a feasible way of getting the signal from the first building 660 feet to the second building?

View 6 Replies View Related

Networking Of Two Buildings And Assigning IP And Subnet?

Aug 14, 2012

i need to draw a picture of a network being divided into two buildings one with 100 connections and the other with 560 connections and also need to assign ip and subnets on them. how many routers do i need for this?what class of ip do i need to use?what are the subnets

View 13 Replies View Related

Long Range Wifi Through Buildings

Mar 16, 2012

I've recently lost my ability to access the internet at uni and as this is quite an inconvenience I am considering some alternatives, the most viable one I've managed to come up with hinges on the fact that I live in a building which is only a road and another building away from the main uni buildings (3 buildings on 2 city blocks), basically it looks like this: UNI BUILDING 1 | UNI BUILDING 2 |ROAD| UNI BUILDING 3 |ROAD| MY APARTMENT.So I'm thinking of building one of these: url.. or waiting for the r20000g (dual band) to come out and buying that.THEN the area I'm having a bit of trouble with: I need to get reception about 600-700m away through buildings, so I've been looking at Yagi antennas and such but can't seem to find any information on the following:

1. Will a high powered directional antenna go through a few buildings and still make it 1km (.6 miles)

2. How directional is a directional antenna? like if I point one in the general direction of the building how accurate do I have to be? (I have no problem buying 4-5 antennas if I need to)

3. Do I need a new Wi-Fi antenna for my laptops? it seems odd to me that a laptop would be able to transmit back 1km while I need a giant antenna to get to the laptop (I know its not this simple but it still seems odd)

View 3 Replies View Related

Design Network For Five Storey Buildings

Dec 26, 2011

How to design network with two buildings. each buildings five- storey buildings.buildings 1 has 200 computer and buildings 1 has 150 computer. which topology and cabling to use

View 2 Replies View Related

Best Network Cables For Networking Two Buildings

Mar 5, 2012

Plan a network to Connect 2 buildings 3 storey high with a distance of 500m between each building. Each floor is occupied by the Finance Department, Administration Department and Computing Department.the report should have the following items. Anything extra is encouraged.

a. Introduction
b. Network Diagrams
c. Devices that will be used.

View 1 Replies View Related

Running Ethernet Network Between 2 Buildings 1000 Feet Apart?

Jul 16, 2011

I need to a run an Ethernet network between 2 buildings 1000ft apart. The buildings are in a forest so I don't think wireless is possible. What kind of cable can I run between the two buildings and what type of adapters do I need on each side?

View 7 Replies View Related

HomePlug Devices Between Buildings / Data Speeds Are Limited To About 5 Mb?

Oct 27, 2011

I have two buildings on my property that I need to network together. One is my home about 3500 Sq. Ft. and the other is a garage about 3000 Sq. Ft. The two buildings are about 250 feet away from each other. Both are fed from the same utility pole that is half way between them. That means both are on the same transformer, but each has its own metered electrical service.Right now I am using 10 Mb. Home Phone Line network adapters. They work OK but data speeds are limited to about 5 Mb. of throughput and the adapters are no longer available. I also have WiFi at both locations but neither one will talk far enough to cover the other building.I also use X10 remote controls in my house. I have tested them from the house to the garage and they do not work at all over that distance

View 7 Replies View Related

Routers / Switches :: 500 Ft Enhanced Cat5E Cable Ethernet Between Two Buildings?

Jan 27, 2013

A 500 ft Ethernet run with a mid-point POE extender, what should I use on both ends for best results? Looking for a possible switch at the termination end. I'm using enhanced Cat5E cable.CGMAN

View 10 Replies View Related

Cisco WAN :: X2-10GB-LR Having 10GB Uplink Between Two Buildings

Oct 20, 2011

My manager ordered some Cisco X2-10GB-LR in hopes of having a 10GB uplink between two buildings. We put those modules on the switch and we are getting link flap errors, then the ports goes into err-disabled state.
 
I was later told there is a couple of "hops" between the buildings, it could be a patch panel or a fiber switch, I do not know at this point. My guess is, we are getting link flap because the "hops" are only running at 1GB. Would this be a typical sympton of the link flap error message? and is there any way to test if there is switches inbetween our routers?

View 2 Replies View Related

Linksys Wireless Router :: Cannot Connect Computer To Cisco Connect - EA3500

Jul 29, 2012

Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.

View 8 Replies View Related

Linksys Wireless Router :: E1500 - Can't Connect To Cisco Connect

Feb 24, 2013

I have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
 
I've tried changing the Ethernet cables

View 1 Replies View Related

Linksys Wireless Router :: Can't Connect To 192.168.1.1 Or Cisco Connect

Feb 25, 2011

I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.

View 7 Replies View Related

Laptop Cannot Connect To Wireless But Can Connect As Wired?

Nov 19, 2011

Recently I installed connectify because my uni flat only had one wired outlet, and I wanted to use my xbox at the same time. It worked perfectly, but when I returned home I found my laptop could no longer connect to the home network, it just says it cannot connect, but all the over devices in the house work. My laptop can still connect to the internet via an ethernet cable but this isnt practical at home. I've uninstalled the connectify program, and tried my best to make sure I got rid of all the stuff it's done, but still my problem persists

View 5 Replies View Related

Connect Wifi Usb To Wireless Router For Better Connect?

Aug 13, 2012

Any way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room

View 1 Replies View Related

Connect PC To Wireless AP Directly To Connect To LAN

Mar 12, 2012

I have just built a PC desktop and do not think it has the wireless built-in on the motherboard. I'd like to connect to the local network wirelessly. I know that the easiest answer to this is to get a wireless PCI card. But can I ask that in order to be able to access to the LAN wirelessly, I could plug my PC directly into the wireless access point TP-Link.

View 1 Replies View Related

Cannot Connect Via Ethernet But Can Connect Via Wireless

Jan 1, 2012

I have just moved in to a basement apartment and can connect to the internet with my wireless but not with the ethernet cord ran downstairs for me. The other computers upstairs work fine on ethernet through the same router. I do not understand what the problem could be. here are my configs:

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
Windows IP Configuration

[Code].....

View 2 Replies View Related

Can't Connect Via LAN But Can Connect Via Wireless On Modem

Feb 20, 2011

I can't seem to connect my laptop using my ethernet cable, but I'm able to connect it to the Internet using my wireless connection. Whenever I plug in the cable, my computer tells me that the LAN connection is connected, but I can't open a web page. I tried connecting the cable onto another laptop and it worked, so I don't know what's up with the LAN connection on mine.

Command Prompt Message after ipconfig /all:

Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller

[code].....

View 11 Replies View Related

Can't Connect To Wireless From XP But Can Connect From MAC?

Sep 19, 2011

I have a new broadband connection and I was kinda facing problems connecting wirelessly with my router.So I did go to my router page and then cloned my MAC book's mac id, and it worked fine. I'm able to connect to the internet wirelessly. However, I can't connect to internet from an Windows XP lappy. I have removed, re-added the network, the network is very much identified but the laptop doesn't wanna connect to the internet wirelessly.Both the laptops MAC Book pro and Dell(the one which has XP loaded) were able to connect without any problem in the previous ISP's case but XP doesn't wanna connect to with the new ISP.

View 3 Replies View Related

Cisco Wireless :: Can Access Point AP541N Connect To Wireless Clients

Aug 10, 2010

Can the access point AP541N connect to wireless clients with 802.11g/a simultaneously?

View 1 Replies View Related

Cisco Wireless :: 6509 - Android Phones Won't Connect Guest Wireless

Jun 10, 2012

Android users can connect to our hospital guest wireless but will not have connectivity. Our wireless infrastructure is WISM based with 2 controllers on 6509 platform. We have a mixed environment of 1231, 1252 & 3502 series APs.
 
Had issue connecting just Android devices? All other devices connect fine.

View 5 Replies View Related

Linksys Wireless Router :: WRT610N 5ghz Xbox 360 Wireless N Adapter Won't Connect

Aug 12, 2011

WRT610v2 running latest firmware.
xbox 360 sees both the 2.4 network (ssid = network1) and the 5.0 network (ssid network2) when it does its scan.
 
Initially, xbox showed network strength for 2.4 network at 3 out of 4 bars and 5.0 network at 1 out of 4 bars. Connects to 2.4 network just fine, Won't pull an ip address and reports "Not connected" when I select the 5.0 network.

I tweaked the wireless settings per some suggestions I found in this forum and now it shows the 5.0 network at 4 out of 4 bars signal strength. Also turned security on and off and xbox 360 reported the changes in security on the 5.0 network. So the xbox 360 is definitely seening the 5.0 network. and can tell if it is running WPA2 or not. If it can see the 5.0 network and recognizes what security and network type (infrastructure) is set, would would stop it from connecting to the WRT610n router and getting an IP address? No mac filters or firewalls are set and, again, connects just fine and gets an ip address if I select the 2.4 (network1 ssid) instead.

View 2 Replies View Related

Linksys Wireless Adapters :: WUSB11 Changed To WPA2 And Notice Wireless B Device Won't Connect

Nov 7, 2012

I have a WUSB11 Wireless B and wonder if it accepts WPA2 security, I originally had my router set to WPA, and the wireless B worked fine, I have since changed to WPA2 and notice the Wireless B device won't connect.

View 8 Replies View Related

Wireless Laptop Can Connect To Wireless Router But Internet Not Work

Jun 21, 2011

I have wonder that my laptop has wireless, and when i connect it to router to use internet it show wireless now is connect, but when i open the website it show not work..and this problem occur only my computer. and when the other computer laptop they can connect and use internet normal...

View 1 Replies View Related

Linksys Wireless Router :: E1200 - Connect Non-wireless Printer?

Feb 12, 2013

I have just installed the E1200 router to my cable internet and it works great, but my printer is not wireless and is not even being recognized as an device on my computer. How do I now connect my printer?

View 1 Replies View Related

Linksys Wireless Router :: E4200v2 Wireless Connection Won't Connect

Mar 18, 2012

I have a E4200v2 and im getting wireless connection issues. I have updated to the lastest firmware and have checked all my wireless settings. I dont use usb storeage. I have 1 laptop using 5G, my iphone using 2G and my wife mac using also 2G.. the problem is that, once we stop using the 2G connection (leave it overnight), it just dies the next day.. it wont connect, i double check the password and it wont connect. But the 5G connection is fine.. Do i have a break E4200v2? or anyway of fixing this?

View 2 Replies View Related

Wireless :: Unable To Connect Wireless Internet On Notebook?

Feb 11, 2011

I have a nintendo dsi and a 7" wireless netbook and 7" notebook. It says signal strength good, it even says connected. But when I goto internet unable to connect. We have a wireless laptop that works fine.

View 3 Replies View Related

Wireless :: Laptop Can't Connect To The Wireless Internet At Workplace

Jul 6, 2012

My laptop can't connect to the wireless internet at my workplace, but I can connect to the wireless internet at my house.I'm very sure that the wireless internet at my workplace works because all of my co-workers can connect their iPad, smartphones, laptops...etc to the internet.I just can't get my laptop connected. I entered the right password, and then the connecting status keeps changing back and forth between "Connected" and "Limited access". It also shows "Identifying... no network access" all the time.I really don't know what happened to my laptop's setting. I have tried to remove the wireless network from "Managing Wireless Network" and set it back up again, but it doesn't work at all.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved