Cisco Wireless :: Directional Antenna For WAP200e?

Jan 15, 2013

directional antenna for the WAP200e.
 
I've been googling but can't seem to find a product. I have found omni-directional but no directional antennae

View 2 Replies


ADVERTISEMENT

Cisco Wireless :: 3502e Directional Antenna Connection

Sep 5, 2012

The 3502e has 6 antenna connections, 3 for each band, 5GHz band is marked in blue. The antenna pigtails are only marked with the matching color - 3 blues or 3 blacks. No A,B or C. Does it matter which pigtail goes to which of the 3 terminals so long as the band is correct?

View 1 Replies View Related

Cisco Wireless :: WAP200E On Bridge Mode Without External Antenna?

Jun 7, 2011

Is it possible to connect two WAP200E on bridge mode without external antennas if they are 200 mts. (219 yard) apart?

View 2 Replies View Related

Cisco Wireless :: AP1552 Directional Antennas Outdoor

Jun 30, 2012

I am expanding coverage in a big outdoor area.Most of the area is covered with AP1552 with AIR-ANT2506 5,2 db antennas.At the border of the area i have some masts where i can place ap's.Would it make sense to use directional antenna's there? I have a big open area where it is not possible to place ap's.The only placement is a mast in the middle of the area.I have a AP1552 with 5,2 db antennas there.Can i get better coverage if i place 3 or 4 ap's with directional antennas ?Or should i try with a 12dBi AIR-ANT24120 ?

View 2 Replies View Related

Cisco Wireless :: AP3500e Need To Cover Distance Up To 300m In Directional Point

Nov 19, 2012

I have AP3500e serises and I need to cover distance up to 300m in directional point. I was trying to find any materials about distance which are covered by different types of antennas but I can't . I think I will prefer to use external antena , but can I get a converter from RP-TNC to N type connector.

View 6 Replies View Related

Cisco Wireless :: How To Power WAP200E

Jun 6, 2011

how to power a WAP200E. In the datasheet it mentions it supports POE, however the customer does not have a POE switch and for one WAP220E is not willing to purchase.
 
What other options do we have? Is there a power supply for this AP?

View 4 Replies View Related

Cisco Wireless :: What Is The Maximum Range Of WAP200E

Sep 9, 2012

I want to know what is the maximum range of WAP200E. I found in an overview of the family of access points "CISCO SMB" that could reach up 4kms. Is that true?

View 3 Replies View Related

Cisco Wireless :: Bridging VLANs With WAP200E?

Sep 17, 2010

I'm trying to bridge two buildings with two WAP200E. The connectivity is fine, but I'm only able to get one VLAN through the bridge. That is the default VLAN 1 wich is untagged. I have two additional VLANs wich is tagged. I can not get these two through the bridge. I have set up a single SSID, and enabled VLAN. I have also tried to set up more than one SSID, mapping each VLAN to separate SSID's, but bridging several SSID's between two AP's make the AP's loose connectivity periodically. What would be the propper way of bridging several VLANs between two WAP200E ?

View 1 Replies View Related

Cisco Wireless :: WAP200E Unstable Bridge

Mar 1, 2009

I am having trouble with an pair of WAP200E's. The bridge between them stalls, found that one of the AP wireless LED don't show any activity. After powercycle the stalled AP, the bridge works again for a day or two. Have tried to replace the AP's still the same issue
 
Firmware is 1.20a

View 15 Replies View Related

Directional SMA Antennas For RT-N16?

Nov 10, 2011

I've got two RT-N16's one is a bridge and the other is the AP.I don't need an omnidirectional antenna on the AP because it is literally in the highest, farthest corner of the structure and a quarter-sphere signal would be perfect... I'm looking for some antennas to replace the omnis on it. [URL]

View 1 Replies View Related

Cisco Wireless :: WAP200E Bridge Not Passing Data

Apr 19, 2012

Just setup two WAP200E's, the bridge is "Connected" as I look Status > System Performance in both WAP's. However, I cannot get to the LAN from one network to the next. Cannot even ping the WAP's from either side.
 
I already have two WAP200E's on this network, that have been working well for month (164 day uptime), and they are configured with a wireless bridge between them, both networks on the same LAN (same 192.168.2.x network on either side). The bridge names are different, different from the main WiFi in the building, too (if it makes a difference), and the static IPs the WAPs have don't appear to have any conflicts on the network.
 
This is actually three buildings, one is the main one with a Cisco SR520 for a router, and a Cisco SF 200-24P switch. So two WAP200E's go into this switch now, and I see them both fine when going into the management interface. Then each of the other buildings has one WAP200E, and a small Netgear 8 port PoE gigabit switch at each building to power the WAP.
 
The Netgear switches aren't managed, and I've made sure any features like STP, VLANs, etc. are turned off. And the Cisco SF 200 switch is set at auto and all the defaults mostly, particularly for the ports. I tried doing a SmartPort for this latest WAP200E and that didn't change anything, tried disabling STP for it too, and no change. The PoE port for the working WAP200E is identical in config to the PoE port for the new WAP200E, and both show forwarding, all VLANs admitted (none are enabled, no VLAN tagging, etc.).
 
So now I am wondering if I can have two WAP200E's into one switch? Or two bridges on the same LAN subnet? Or is there something else I am missing or should configure?

View 1 Replies View Related

Cisco Wireless :: WAP200E G Exterior Reboots After 15 / 25 Minutes

Apr 23, 2012

WAP200E access point that causes it to reboot after anything from 15 to 20 mins .I have run it off an injector and a POE switch, updated the f/w to WAP200E-ETSI-FW-2.0.3.0 and it still reboots itself .I have even been sent a new one from the supplier and it does the same thing.

View 5 Replies View Related

Cisco Wireless :: WAP200E Access Point Drops Connections

Aug 18, 2012

I purchased a Linksys WAP200E Wireless-G Exterior Access Point – PoE and a HGA9N (9dBi) High Gain Omni-Directional Antenna through CDW Canada about three (3) years ago in April/2009. The first year it worked great and gave complete coverage throughout the Campground. The second year it started to become increasing less coverage and now in the third year, it has very poor coverage. I have purchased and installed a new Microcom HG2415U-PRO (15dBi) HyperGain Outdoor Omni Directional Antenna. This has NOT made any improvement so I am now thinking that the WAP200E Access Point is the faulty equipment. I have changed the channel to number 11 and still no improvement. The Signal Strength is only Good and then dropping to Fair and sometimes no signal at all. This is from a line of sight location that is only 60 yards (180 feet or 54.9 metres) away. There are no objects between the Antenna and the computer.

View 3 Replies View Related

Cisco Wireless :: WAP200E No Good Signal Between Aps And Motorola 9000

Jan 7, 2013

I have 3 WAP200e APs in a client site and I am having a problem with the signal between the APs and Motorola 9000 barcode scanners.The first one went in about 6 months ago and it worked fine. The client then asked for two more to be installed in a couple of rooms adjacent to the room where the first AP was installed. They use barcode scanners with these APs and since the two new ones were installed, the first on is dropping the connection to the scanner. I have turned the new APs off and everything is back to normal. I have reduced the power output of the two new APs and the situation has improved, but they still get problems, especially on Monday morning, where it won't work at all for the first few hours, and then bursts into life and works fine for the rest of the week.

View 7 Replies View Related

Cisco Wireless :: WAP200E Bridge Mode 200m Apart With Trees Between?

Jun 9, 2011

i would like to know if wap200e will still have connection if there are trees in between. because we have 2 offices that is 200 meters apart and trees all over them. i just wanna know before we buy the unit.

View 1 Replies View Related

Establish Bi-directional Communication Between 2 Routers On 2 Subnets?

Sep 6, 2011

I have three routers and 2 ISPs but I'd like to focus for now on a configuration with only one ISP provider. Here is my environment:

Netgear Cable (CBVG834G) wireless routerON the cable router are connected multimedia type equipments (TV/ IP set top box/ IP amp ) located on the family room DHCP ON (because I can't get internet connectivity when I assigned Fix IP address I come to that later) IP Adress:192.168.1.2 DHCP range:192.168.1.10/ 19 Reserved IP : 1292.168.1.10 for the Dlink 4 DEV a connected D-LINK ( DIR-855) wireless router.mainly PCs, NAS (x2) located on the first floor. DHCP ON Lan IP Adress: 192.168.0.1 DHCP range:

192.168.0.100 / 120 WAN Ip address : 192.168.1.10 6 PCs are connected

Everything works fine from an internet connectivity standpoint:

DEVx can connect to internet fine
PCx can connect to internet
PCx can access DEVx

Now the issue DEVx can't access resources from PCx!

View 4 Replies View Related

Cisco Wireless :: WAP200E And Wireless Control System

Jun 26, 2011

I have a customer with a linux OS machine running Cisco Wireless Controll System.
 
He needs are to add a new wireless AP with the following features :
 
- compatible with most laptops
- exterior conditions "resistant" (sun, rain...)

- reasonnable performance (the AP would be a a roof with people on the roof itself, max distance : 15 meters, no walls)

I saw the WAP200E but I have no idea, if it is compatible with Cisco Wireless Control System

View 2 Replies View Related

Cisco Routers :: How To Connect WAP200E To SW2960

Oct 25, 2012

I have a problem  to connect my WAP200E to SW2960. What is my mistake?Both are POE. I connect only Wap200e to SW2960 and I check the 15.4watts, but I suposed that WAP 200E doesn't respond, because WAP 200e doesn't turn on.I need to put to grown, or put some device before on connect to SW2960 to WAP 2000E.

View 10 Replies View Related

Linksys Access Point :: Where I Can See Clients Associated To A WAP200E

Nov 7, 2011

Because of a connection problem, I would like to know where I can see the clients associated to a WAP200E AP and the signal level of each client.

View 1 Replies View Related

Linksys Access Point :: Wap200e Disabled STP On Switch And On AP

Jun 21, 2012

I'm using 4 wap200 cisco AP, 1 wap200e linksys AP and 1 cisco sf300-24p switch. Every AP has 2 SSIDs,one is for clients and one for mobile devices.I have updated the equipment to the latest firmware but I still encounter the same issue. The mobile devices go through APs and once every 2 days, my wap200e blocks its lan interface. I suspected a stp issue, because the switch was seeing MAC addresses coming from different ports.So I disabled STP on the switch and on the AP. The annoying thing thing is that none of my other antennas get cut off.I tried replacing it with a cisco wap200e,same issue.

View 1 Replies View Related

Cisco Wireless :: Air-cb21ag-a-k9 Without Antenna

Jul 29, 2010

I need to update from older Cisco 350 Aironet 802.11a/b Wireless CardBus Adapters to Cisco cb21ag Aironet 802.11a/b/g Wireless CardBus Adapters in rugged tablet pc's. I need these without the antenna cap present to utilize the tablets antenna sytem. They are pictured on the Cisco website but Cisco partners I've contacted have been unable to assist me in purchasing them.

View 1 Replies View Related

Cisco Wireless :: AIR-LAP1242G-A-K9 - Ap And Antenna

Dec 10, 2012

I have a AIR-LAP1242G-A-K9. I have several question:
 
1.       Does the antenna is a MUST for it to work.
2.       If I have a 1 unit of AIR-ANT2422DG-R (antenna) , does the wireless access still work? Do I need 2 antenna
3.       If I have a 1 unit of AIR-ANT2422DG-R, does 802.11 b supported.

View 2 Replies View Related

Cisco Wireless :: WAP 200 With External Antenna

Mar 2, 2012

I connected an external 12dBi omni-directional antenna for Networks 2.4 Ghz (TL-ANT2412D) with LMR-400 cable 5M but my antenna "emits" nothing, I have no signal. With the two supplied antennas with WAP200 I signal but does not cover any desired area.

View 5 Replies View Related

Cisco Wireless :: Antenna Separation For AP 1260?

Oct 24, 2012

We are installing 1260 Access Point (AIR-LAP1262N-E-K9) with 2 sets of external antenna:AIR-ANT2460NP-R (2.4Ghz, Patch Wall-mount, 6dBi Directional) & AIR-ANT5160NP-R (5Ghz, Patch Wall-mount, 6dBi Directional).What would be the recommended separation of the 2 antennas if they will be mounted beside each other?

View 1 Replies View Related

Cisco Wireless :: 881G With External Antenna?

Sep 12, 2010

an external Antenna for a 881G? We're using AT&T.

View 4 Replies View Related

Cisco Wireless :: Antenna Gain Of 3502AGN AP

May 21, 2013

I recently checked the output of one of my AP 3502AGN which are connected to a WiSM with the current 7.0.240.0 software. There I saw the following output:
 
show ap config 802.11b 3502AGN-1100c-1
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... INTERNAL_ANTENNA

[Code].....

View 3 Replies View Related

Cisco Wireless :: 1262 - Antenna Direction On AP?

Aug 19, 2012

I have to replace a 1230 with an 1262 AP.
 
All antennas have to be in the same direction on the AP and I guess when the old 1230 is working well the 1262 will be only better . Attached u see how I plan to mount the new AP versus the old one...

View 7 Replies View Related

Cisco Wireless :: 1142 AP Antenna Configuration?

Aug 13, 2012

When we take a look at the internal antennas on the 1142 AP, we notice the 5ghz pointed all the same way, but for the 2.4ghz we can see each offset by 45/120 degrees. It was my understanding that all antennas are omnidirectionals on the 1142, why are those 2.4ghz antennas not all pointed the same way? onfiguration advantage and that each antenna is indeed omnicadirectional? Example, if I shut just one antenna off, do I lose a sector (120degree)?

View 5 Replies View Related

Cisco Wireless :: How To Get 3500e Antenna Selection

Jan 24, 2012

i want to install a 3500e. I have a hole in my wireless network where this AP will be a perfect fit. I do have a wireless controller running code 6.x, so I think I will need to upgrade to 7 which is not a big deal.
 
The problem I have is the antenna selection. Since the AP has MIMO multiple-inputs multiple-inputs I’m perplexed on the type of antenna to choose. Since the environment is a warehouse the Omni directional would be preferred - should I also add the dipole antenna for close proximity to the AP. Also, I noticed in the getting started guide the 3500e has 6 external connection points 3 for 2.4 and 3 for 5 GHz. The antenna documentation says to use dual-band antennas, but this contradicts what is shown in the getting started guide. So what antennas should I get to make the 3500e work in a warehouse environment.

View 4 Replies View Related

Cisco Wireless :: Find SKU For HGA9N Antenna?

Feb 4, 2013

where can I find SKU for HGA9N antenna? Looking in CCW but I can't find it. Neither I can find EoS notice for it.

View 4 Replies View Related

Cisco Wireless :: 3502e APs - How To Mount Antenna

Mar 22, 2013

I am still new to wireless. I have been studing for my CCNA Wireless for about 6 months now so I still have a lot of questions.

Right now I have to deploy some new APs. We are using 3502e APs. I have a qustion on how to mount antennas for these access points. I have to make a mounting bracket the new installations. What was done with the previous APs was to mount a unistrut beam to an I beam in the building. There is 2 AIR-ANT-1728's and 2 AIR-ANT-5160V-R antennas mounted straight out on the unistrut. Then they put a T bracket on the unistrut and mounted a second bar 90 degrees from the main bar and connected the third 1728 and 5160 antennas on the second mounting bracket. So we have 4 antennas in a row, and two off to the side 90 degrees from the other 4 antennas.
 
My question, is this OK to have them this way, or would it be better to have all 6 antennas in a straight line when I fabricate my new AP brackets?
 
Here is a picture of what I am talking about. This would be looking at it from above.
Current                                                       New Proposal
__________o__o__o__o_                     _________o__o__o__o__o__o  
          |               AP                                                       AP
          |
          |o
          |
          |o   

View 7 Replies View Related

Cisco Wireless :: 3502e Antenna Connection?

Sep 5, 2012

The 3502e has 3 antenna terminals for each band. Is the order of connection to the antenna pigtails significant? The antenna pigtails are not marked ABC (just blue boots for 5GHz.)

View 2 Replies View Related

Networking :: Best Wireless Adapter Or Antenna For DWA-547

Mar 22, 2011

I have a DWA-547 wireless adapter in my PC and only get 1 to 2 bars....I was thinking about getting another wireless adapter or getting wireless antennas to boost the signal if it works?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved