Cisco Wireless :: LAP1131AG - Change Firmware To Make Normal Access Point

Apr 1, 2012

I brought a LAP1131AG, only later found out that it can only be used with a controller.Is there any way I could change the firmware to make it a normall Access Point?

View 5 Replies


ADVERTISEMENT

How To Make Router Wireless Access Point

May 22, 2011

I am using a windows vista laptop with a wrt160n linksys router. I want to make it an access point without using wires.

View 3 Replies View Related

Make Wireless Access Point Broadcast New Secured N Network?

May 28, 2011

I had an old G router that had an unsecured network. It died and I replaced it with an N router and installed a secured network. I have a cable modem with wires that goes to the router. From the router, I have CAT 4 wires going to several access points around the house. Into one of these acess points, I have pluged in a wireless access point that broadcasts wirelessly---unfortunately, it is broadcasting the old unsecured network. How can I make the wireless access point broadcast the new secured N network?

View 6 Replies View Related

Linksys Wireless Router :: Make WRT54G An Access Point Only?

Nov 25, 2007

I need to make my WRT54G an access point only. I tried information contained on Linksys site, but I can't seem to get it to work.

View 9 Replies View Related

Linksys Access Point :: WAP54G Possible To Downgrade Firmware From Access Point

Jan 17, 2013

I have a WAP54g hardware version 1.0.I install de last firmware on this access-point but, this access-point reset automatic after a random time..It’s it possible to downgrade de firmware from this access-point?

View 1 Replies View Related

Linksys Wireless Router :: Make WRT160N Access Point With E3000?

Jul 24, 2011

I want to use my WRT160n in my room to connect all my devices (Xbox, playstation 3, and 3 laptops) I hardwired the E3000 from the room downstairs thats connected to everything else.

View 2 Replies View Related

Linksys Wireless Router :: Change E3200 To Access Point?

Feb 24, 2012

how can a change my E3200 to a access point ? i have a wired router for my home network , connect to 2 x PC , NAS , printer. that works good , now i what to start up my wirless access piont . i standard configuration it is also a router .  this wirless router is blokking my access to my NAS i think . i need to change it to a access point .

View 4 Replies View Related

Make Linux Machine As Access Point?

Jul 9, 2011

How to make linux machine as access point

View 1 Replies View Related

Make Router WRT54G As An Access Point?

Apr 22, 2011

step by step to make my router WRT54G as an access point?

View 1 Replies View Related

Remedy / Procedure To Make Deformed CAT-5 Cable Into Normal Condition?

Jun 27, 2011

What is the remedy/procedure to make a deformed CAT-5 cable into normal condition.

View 1 Replies View Related

Linksys Wireless Router :: Change WRT320N IP Address To Use It As An Access Point?

Oct 9, 2011

When I change my WRT320N routers IP address to use it as an access point only and bring it in the IP range of my ccombined modem/router I'm not able to view the setup page via the new IP address. I have tried to change the IP from the default 192.168.1.1 to 192.168.178.2. After changing and applying the changes I restarted the router and tried to access the router via the new address. This was not possible am I doing something wrong or did I forgot something?

View 8 Replies View Related

Cisco Wireless :: AIR-CAP3502I-N-K9 - Change Regulatory Domain On Lightweight Access Point?

Mar 22, 2012

I'm wondering if there is an easy way to change the regulatory domain on a lightweight access point.  The reason I'm asking is someone accidentally placed an order for AIR-CAP3502I-N-K9 access points instead of the AIR-CAP3502I-A-K9 flavored ones.  I can see how it happened, since undoubtedly someone asked for the "N" access points, thinking 802.11n, and the other person was thinking AIR-CAP3502I-"N"-K9.
 
do I have to RMA them, or is there a way to magically turn them into the ones flavored for the Americas?

View 12 Replies View Related

Cisco Wireless :: Change IP Address Of Aironet 1200 Series Access Point

Dec 30, 2012

we have 6 access points in production and we want to chnage the IP addresses of them. So what would be the procedure for that.

View 17 Replies View Related

Using Xp As Wifi Access Point To Make Bberry Internet Connection Available?

Apr 24, 2011

I have a Windows XP SP3 desktop with a NetGear WG111v2 USB wireless adapter and I get my internet connection from my Blackberry 8320 (I connect my BBerry device to my PC and start Blackberry Desktop Manager and choose to use internet access of my phone for my PC). I want to be able to make this internet connection available to other devices on the network wirelesly. I also have a nook ebook reader and a laptop which I would occassionaly like to connect to internet via the connection described above. How to go about making Blackberry internet connection shared accross the network? I tried Internet Connection Sharing Wizard, but I ended up with nothing to show up for.

View 3 Replies View Related

Linksys Cable / DSL :: Make A Bridge With WAG54G2 And Another Access Point?

Dec 26, 2012

Is it possile make a bridge with my WAG54G2 and another  Access Point ?

View 1 Replies View Related

Linksys Access Point :: BEFSR41 - How To Make Network Secure

Jul 20, 2008

I have been using a Dell desktop for many years now as my primary computer. Recently I received a brand new Sony VAIO laptop. So as to make the laptop connect to the internet wirelessly, I hooked up a Linksys router (Linksys model # BEFSR41) and a Linksys access point (Linksys model # WAP200). Everything is working flawlessly except for one big problem. My network is listed as "unsecure". What steps do I have to take to make my network "secure"? The operating software in the laptop is Windows Vista. How to make my network secure. Let me just mention that the laptop and desktop are home computers and are both primarily used for "fun and leisure". No business "stuff"

View 9 Replies View Related

Cisco Wireless :: AP1262N-E-K9 Access Point With Firmware Version 12.4(25d)JA1 Operating In Autonomous Mode

Jan 10, 2013

we have a couple of AP1262N-E-K9 access point with firmware version 12.4(25d)JA1 operating in autonmous mode.
 
I attempted to measure the signal quality between the APs by setting one device to repeater mode while all others are in root mode. Then, I execute the following command: dot11 Dot11Radio 0 antenna-alignment
 
1. The output of "show dot11 antenna-alignment" is incorrect, the % value represents the signal strength in dBm without the - (minus). E.g. "-25 dBm" is displayed as "Signal 25% 0 dBm".Now, I know that is only a display error but still this is not clean. Is this a known issue?
 
2. Why are the measured signal strength values not displayed on the SSH console during the antenna-alignment test? Is it obligatory to use the console to see these values? Or is it also a known bug which might be fixed in later firmware versions?

View 2 Replies View Related

Linksys Cable / DSL :: WAG54G How To Setup Access Point And Make It Work With DSL

Mar 15, 2009

i'm facing a big problem with my access point WAG54G ver 2.0 ,i just bought it from 2 days but i find alot of problems when i start using it ,i have read all the user guide and the quick install to see how to setup the access point and make it work with my adsl.i have configured all things right using PPPOE and putting my user name and password and then save settings then go to the status and press on connect , but it don't connect with me just i find connecting and adsl link : Down and still making connecting  and nothing after that and my adsl led is off haven't any colors ,and when i get again to basic setup i found the password that i put it in the ppoe login is too long , not my password i tried to see what is this password and recover the hidden i found it " d6nw5vlx2pc7st9m ".i don't know what is the problem i tried alot of times to change setting and also the same problem.i think that it's a frim ware problem and i tried install a new updated frimware but everytime trying to install it get installing and suddenly stoped and white page appeard and all the access point is stopping and when restart it the ac power.

View 3 Replies View Related

Linksys Access Point :: Cannot Change Channel On WAP45 - Unidentified / No Access?

Jul 5, 2012

How do I change the channel on my WAP45. I can't connect I get a message unidentied-no access

View 1 Replies View Related

Linksys Access Point :: Can't Access WAP54G After Firmware Upgrade

Apr 30, 2012

I just tried to upgrade the firmware of my WAP54G to the most recent version; however, I got a message on web browser with legend "Update fail" and then I lost the communication with device. Now, I just goty Power and Link LED's, but nothing on Act (green led, indicator of WiFi),I tried to reset using button, and to connect via LAN, but setup wizard is unable to locate the device.

View 1 Replies View Related

Cisco :: Change WPA2 Key On Aironet 1231g Access Point?

Mar 22, 2012

I am trying to change wpa2 key on an Aironet 1231g access point. Once I change they key, clients cannot authenticate to the access point unless they either change the password or forget and re add the network on the client device. Is there any way to make the client ask for a new key if the key doesn't match when authenticating?

View 4 Replies View Related

Linksys Access Point :: WAP610n Can't Change Wmm Settings

May 4, 2010

I try to change the wmm settings to video, but it's always going back to background settings after saving.I already re-uploaded the firmware, but with no result...I noticed that is a newer firmware available for the WET610n where they solved this issue, but they haven't changed it for the WAP610n....

View 9 Replies View Related

Linksys Access Point :: WAP610N Updating Firmware

Mar 26, 2012

I have a problem updating firmware for an WAP610N access point. The thing is i tryed to update from 1.0.01 to 1.0.03 and the update freezed at 49%. The next day it was restarted but of course it didn't worked again. The question is can i reset it some how so i can retry the firmware update ?

View 2 Replies View Related

Linksys Access Point :: WET200 Firmware Failed

Mar 10, 2008

I decided to upgrade the firmware in my WET200 so downloaded the latest firmware v1.0.10-ESTI filename WET200-ETSI_v1.0.10_200802_fw.img.Update seemed to go well, and the message came up rebooting please wait.Waited about 5 minutes whilst the message stayed the same, decided to try and close my explorer window and connect again, nothing happened.Tried to reset the unit by holding in the reset butting again nothing seemed to happen. The unit had been set up with the ip 192.168.113.4 before the upgrade but this is now unreachable, also tried the default of 192. 168.1 .226. Anything I can do/try to restore my unit, or did the update brick it?

View 3 Replies View Related

Linksys Access Point :: WAP54G - Change WPA Security Settings?

Jun 16, 2012

I have a new WAP54G Access point in our network. I would like to change WPA security settings, but am not able to do it.I have done everything as installation leaflet says, and I get to the 5th point Status sheet: Firmware version v.304, MAC address (numbers), IP address 192.168.1.245, SSID linksys, Channel channel 6 and WEB security Disable
 
What I would like to do, is change SSID and have WPA2 security. When I am clicking "Yes", it goes to the next sheet "Password",  I write admin and click "Enter". I will have Pop-up window "Setup Access violation at address 0049BDB6 in module 'Setup.exe'. Write of address C933016A."

View 2 Replies View Related

Linksys Access Point :: Update WAP54G V2.08 To The Latest Firmware?

Jul 31, 2009

I am not able to find a download so I can update my WAP54G v2.08 to the latest firmware. 

View 9 Replies View Related

Linksys Access Point :: Download WAP610N Firmware Version 01.0.00 Build 832?

Dec 21, 2011

Is there anywhere I can download  WAP610N Firmware Version 01.0.00 build 832?  I have two units with this firmware version that work OK.  I recently purchased another unit that has WAP610N Firmware Versions 1.0.01 and and can only access an IP address if I do not use any security. I also spent a lot of time on the phone with Linksys support to no avail.

View 6 Replies View Related

Cisco Wireless :: 3502p - Access Point Support MESH And Point-to-Point Bridging?

Apr 16, 2013

I need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging?

View 6 Replies View Related

Cisco :: AIR-LAP1131AG - Limited Access When Authenticated

Oct 8, 2011

At one of our locations we are experiencing some problems getting connected to our wireless networks.
 
It is possible to sit right next to an AP (AIR-LAP1131AG) and only have limited access to the network.
 
I have attached a snapshot from inSSID from the wireless networks in the area. All of them are broadcasted by our controller and I can´t figure out how it is possible to see SSIDs in other channels than the ones in the 2.4GHz band (11-14)?

View 1 Replies View Related

Linksys Access Point :: Can't Find WAG160N Firmware Upgrade Download Page

Dec 23, 2009

Can't find WAG160N firmware upgrade download page on this site  A few mounth ago it existed

View 3 Replies View Related

Cisco Wireless :: Point To Point Access Point 1262 Bridging

Feb 27, 2013

How would I bridge a wireless connection with a distance of 400 feet? Would twoAP1262N-A-K9 be able to make this happen? Or is there another wireless bridge that you all can think of?I would be connecting one AP1262 of off a 3750g switch and at the far end (400 ft aproximately) another AP1262N-A-K9.

View 12 Replies View Related

Cisco Wireless :: Upgrading 1042 Access Point To Lightweight Access Point

Apr 20, 2012

I had a new AIR-AP1042N-N-K9 access point and I tried to convert it into lightweight mode with the image c1140-rcvk9w8-tar.124-21a.JA2.tar . I used all the methods but the AP is getting hanged at one position after decompressing the new IOS. The capture of the process is below: [code] After this I am getting the junk characters and everytime AP hangs at this position.

View 4 Replies View Related

Cisco Switching/Routing :: 888w - Way To Change Usage Of ISDN Port To Normal RJ45 Port

Sep 25, 2012

I have Cisco 800 series (888w) with BRI-ISDN port. Is there any way to change the usage of ISDN port to normal RJ45 port?I want to use this SOHO router to sharing connection.

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved