Cisco Wireless :: WLC 5508 - Configure IPSec Between WLC And Server 2008 NPS?

Dec 13, 2011

I have been unable to get IPSec working between my WLC 5508 and a server 2008 NPS radius server. Any luck configuring this?  I have opened tickets with both Microsoft and Cisco, but so far have not been able to configure it properly. 

View 2 Replies


ADVERTISEMENT

Cisco VPN :: ASA5505 IPSec Authenticate With Windows 2008 Server

Jan 9, 2013

Recently, I set a ASA5505 with Ipsec VPN. And I try AAA authenticate with internal Windows 2008 server. As docuemnt I read, I configure from ASDM authentication with "NT Domain". And then point to internal DC, which is Windows 2008 server. While I test it, it shows error

"Authentication test to host 192.168.xxx.xxx failed. Following error occurred -- ERROR: Authentication server not responding. No Error"

View 3 Replies View Related

Cisco :: WLC 5508 - LDAP On Windows Server 2008?

Jul 14, 2011

I'm having a problem with a WLC 5508 and a LDAP on windows server 2008, I already config everything on the WLC, but when a user try to authenticate I have this debug result:
 
*aaaQueueReader: Jul 15 19:27:07.384: 00:1b:77:7b:19:aa Returning AAA Error 'No Server' (-7) for mobile 00:1b:77:7b:19:aa
*aaaQueueReader: Jul 15 19:27:07.385: AuthorizationResponse: 0x3c9ceac4
*aaaQueueReader: Jul 15 19:27:07.385:   structureSize................................32
*aaaQueueReader: Jul 15 19:27:07.385:   resultCode...................................-7

[code]....

View 8 Replies View Related

Cisco Wireless :: WLC 5508 Support IPSec To Radius Server?

Jan 23, 2013

I am trying to follow the Fips guide for the WLC5508 and it wants to encrypt the connection to the Radius, either with PSK key wrap or IPsec. I have the options for Ipsec only as the Windoes NPS does not support Key wrap from what a previous user confirmed for me here on the board.. But then found another post that states that the 5508 does not support IPsec?

View 5 Replies View Related

Configure DHCP And DNS On Windows Server 2008 R2?

Apr 16, 2013

I want to set up a domain for a file server and MS SQL 2005 server on my server machine and installed windows server 2008 in it.

Do I need to set up DHCP server and DNS on Windows server 2008R2 or leave them to the router to do the job?

View 1 Replies View Related

Static IP / Configure Server 2008 For Internet Access?

Oct 9, 2012

I have a static ip , So how co configure my server 2008 for the access from internet [URL]

View 1 Replies View Related

Configure In Windows Server 2008 Network NIC1 Is WAN / NIC2 Is LAN?

Mar 29, 2011

How to configure in windows server 2008 network NIC1 is WAN and NIC2 is LAN?

View 1 Replies View Related

How To Configure Linksys AG241 As IPSec Server

Apr 2, 2011

I have Linksys AG241 ADSL router. i have a IPSec vpn client installed on my laptop, so can i connect AG241 & access the hosts behind AG241?

View 1 Replies View Related

Cisco VPN :: Possible To Use RV042 To Connect To 2008 VPN Using IPsec

May 22, 2011

Can I use RV042 to connect to 2008 VPN useing IPsec

View 1 Replies View Related

Cisco :: How To Set Up 2008 (NPS And NASs) RADIUS Server For 802.1X Wireless Clients

Sep 25, 2012

how to set up 2008 (NPS and NASs) RADIUS Server for 802.1X Wireless clients.

View 1 Replies View Related

Cisco Wireless :: AP541N With Windows 2008 Radius Server?

Jan 24, 2011

I am trying to connect an AP541N to a radius server for Domain authentication but cannot figure out how to Configure the widows 2008 Radius server to authenticate users but cannot seem to get the AP541N to do this, how to configure both the 2008 radius server and also the AP541N?

View 2 Replies View Related

Server 2008 - Share Internet Through DHCP Server

May 6, 2012

[code]...

I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server

View 10 Replies View Related

Can't Connect To Server 2008 Via Server Manager On Windows 7

Feb 11, 2011

I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.

View 18 Replies View Related

Cisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2

May 15, 2011

I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.I got 2500 WLC with POE switch and 4 aironet AS 1142.

View 16 Replies View Related

Cisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2

Jun 27, 2012

I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.
 
I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.
 
In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.
 
I got 2500 WLC with POE switch and 4 aironet AS 1142.

View 4 Replies View Related

Wireless :: Software Drive Linksys Wmp54g For Windows 2008 Server

Oct 25, 2011

i need software drive linksys wmp54g for windows 2008 server

View 2 Replies View Related

Linksys Wireless Adapters :: WMP600N Compatibility With Windows Server 2008?

May 1, 2011

WMP600N is compatible with Windows 2008 Home Server?

View 1 Replies View Related

Server 2008 R2 Windows Server Backup

Dec 14, 2010

I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?

I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.

View 19 Replies View Related

Cisco :: Configure WAP 321 To NPS On Windows 2008?

Feb 3, 2013

We want to configure a Cisco WAP 321 to NPS on windows 2008.

On NPS system event viewer :
 
An Access-Request message was recived from RADIUS client XXXXXX with a Message-Authenticatior attribute that is not valid.
 
We have installed other RADIUS client on Windows 2003 Server and we have the same error.
 
On the Web interface of Cisco WAP only can configure the IP and password of the Radius server.

View 1 Replies View Related

Cisco :: Configure PEAP With ACS 5.0 Windows 2008?

Jun 11, 2012

configure PEAP for wireless with Windows 2008. The doc we have only mentions  Windows 2003. When we follw that document we get a faulure when we try to bind the certificate to we have generated to ACS 5.0 .

View 1 Replies View Related

Linksys Wireless Adapters :: WUSB300N Windows Server 2008 Doesn't Find Any Network?

Aug 9, 2008

I've just bought a WUSB300N Wireless USB Network Adapter and installed it with the  Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.

View 5 Replies View Related

Cisco Firewall :: Configure ASA5505 To Allow CTIW On SBS 2008

Apr 18, 2011

When using the connect to the internet wizard in SBS 2008 (CTIW) the server comes back with an error that it cannot communicate with the router.Are there any settings that need to be configured in the ASA 5505 to allow communications with SBS 2008 using Exchange Server 2007?  I am using ASDM 5.2 at this time.

View 3 Replies View Related

Cisco :: Does WCS 5.0 Run On Windows 2008 Server

Feb 8, 2009

Does WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized. 

View 6 Replies View Related

Windows Server 2008 With Reg Key?

Mar 7, 2013

I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.

View 1 Replies View Related

How To Install AV On Server 2008

Feb 26, 2013

So as far as I can tell our server is not running any AV whatsoever, so I'm buying Kaspersky Small Business with the 10 PC package:Kaspersky Small Office Security | Virus Protection | Kaspersky Lab to install on it and our other PCs, and I was wondering if there's anything I need to know about installing AV on a server.

View 19 Replies View Related

Windows Server 2008 R2 VPN

Aug 13, 2012

I have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.

View 5 Replies View Related

XP Pro Connection To Server 2008

Jul 22, 2012

Still trying to get this XP pro SP3 to connect to or log into the server, a Windows 2008 jobber. I get the pop up that says unable to access the server, may be a permissions issue. I am administrator on both though and it should not be an issue plus I can ping each machine from the other. The XP machine does not show up in the network on the server though. The server shows up on the XP but then will not allow me to log into it. I changed all user names and pass codes on all the machines to be the same and it cleared up a number of issues except this one. The network name on the server is Network 2 and on another machine the network is named Network 3. Don't know what this means. This XP machine used to connect to the server without issues. My server guy moved away and well, I am just not that savy on 2008 Server. All the other machines are Windows 7. Oh yes, this is a work group with DHCP from a VPN and a Comcast (bless their souls) gateway.

View 2 Replies View Related

Cisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2

Jul 5, 2012

I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?

View 2 Replies View Related

Cisco :: LMS 4.1 Installation On Windows Server 2008 R2

Feb 7, 2012

As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:DCRServer is down or may not be completely up. Check if the DCRServer process is running.And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases.
 
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.

2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.

View 17 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.0 Not Getting Authenticated With 2008 AD Server

Nov 8, 2011

I have a cisco ACS 4.0 build 27  on windows 2003 server . My site was working fine when i was having a AD on 2003 server . Recently i have migrated my AD servers is 2008 .
 
After the migration the ACS is not authenticating the users . Now i have made a server with 2003 and made the site working . I need a solution to make it work using 2008 server is there any compatiblity issue  between ACS 4.0 and  2008 server .

View 1 Replies View Related

Cisco :: LMS 3.2 And Window Server 2008 R2 Standard

Jun 23, 2011

We have bought lms 3.2 and window server 2008 r2 standard. Now we know, it cant be used together Could we upgrade to lms 4.0.1 ? If so, how can we do ?

View 2 Replies View Related

Servers :: Net Send Is Not Available In Server 2008?

Aug 24, 2011

net send command not available on server 2008

View 1 Replies View Related

Terminal Services On Server 2008

May 26, 2011

I have rolled out Terminal Services on Server 2008 R2 for a company I used to work for, it worked perfect the users could go home and browse to our web domain and login and use apps straight from the server.there'd be no Microsoft stuff to be accessed just pure Linux Servers but probarbly if users access the online terminal services on Linux they'd be using a Windows PC

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved