Cisco Nexus 4 - Ping Gateway IP / Getting Packet Loss
Nov 2, 2011
In my network i have Cisco nexus 4 switches those are running as redundancy and fault tolerance. I have mulitple VRF instances are running, when i tried to ping the gateway IP (hsrp Virtual IP) witch same VRF instance it is getting packet loss.
View 3 Replies
ADVERTISEMENT
Nov 21, 2011
I am pinging a host from Nexus 7K. I'm losing every 200th packet when I'm pinging the end host. I don't see any issue with network connection.
View 2 Replies
View Related
Nov 17, 2012
Pinging 98.137.149.56 and had 100% packet loss; this was suggested in another thread. LAN connected at 100 Mbps BUT cannot access Internet! Windows XP HP desktop; Belkin N Router; Optimum Cablevision - Modem Scientic Atlanta "Webstar"
I am using my iPhone to access Internet.
View 10 Replies
View Related
Feb 12, 2013
When I ping my video streaming host's IP address (the IP that they gave me where I can view my IP web camera's video stream), I get anywhere from 0% to 8% packet loss at various times of the day. They're claiming that there's no problem, that this is because this is a router and it's dropping ping packets due to "ping priority giving preference to more important network traffic."
View 7 Replies
View Related
Nov 3, 2012
I recently moved from an old apartment in Downtown Montreal, to a suburb area, but still close to where I was before (10 km). I am using the same ISP provider, Videotron. The same speed. I was playing games perfectly fine before, but now something is really wrong. Whenever I join a server, my ping skyrockets up to close to 200, sometimes drifting to 130 but never going below... and often rising back up again.Keep in mind that I filter servers by their pings. I only join servers that display a low ping (although often I won't see any, when I refresh.. there they are). I'll see a server with 30 ping, join it, and be at 200. I'm mainly trying to play Chivalry Medieval Warfare.It's entirely unplayable. Not only is it impossible to properly time parries anymore, but I also get a lot of rubberbanding. I've tested the internet here, and the speeds are accurate. 10 mbps down, 1 mbps up. I am connected to a Linksys E1200 router. I've tried everything I can possibly think of.I went into the router setup, disabled the firewall, added myself to a DMZ, tried to forward every port for steam (although it didn't seem to recognize it as a program)... rebooted the modem, my computer, the router, tried a different Ethernet cable.. nothing is working. It's very depressing. Nothing has changed on my own computer in the move.
View 13 Replies
View Related
Mar 25, 2011
I have RV082 in many locations and it is working fine.One location I just starting to have problem with packet lose (50 to 60 %)I ping between two location which i am having problem.Gateway to Gateway shows no lose on packet (reply with 20ms avg.)but router to router will lose packet 50 to 60 %.
View 1 Replies
View Related
Jan 24, 2013
about 4 weeks ago we started experiencing Packet Loss and High Pings while playing games. This affects our 2 PC's and our PlayStation 3 (Since we use them for gaming). We have contacted our ISP several times regarding the issue but each representative we have talked to has had different ideas of what the problem is. They replaced the modem twice which did nothing, so I then purchased 2 new Router's (DIR 601 N150 & DIR 835 N750+). Neither of them solved the issue. my ISP also says it isn't the Internet Cable that is causing the issue. My Download Speeds and Upload Speeds are right where they should be but the ping and the packet loss is the problem. I also contacted DLINK (Router Manufacturer) to see if they had and all we did was upgrade the firmware version and change the Wireless channels which also did nothing. I have plugged this PC into the modem with an Ethernet Cord and played games and all the issues were gone which leads me to believe that Modem and the ISP aren't the issue.
Things I've Tried:
-Resetting the Modem
-Testing each Wireless Channel on my Router
-Enabling and Disabling 802.11n and 802.11g on the router
-Changing the QoS settings
-Installing Software such as Gamebooster and Advanced System Care
-Disabling all Antivirus programs and Firewalls on the PC's
-Using a friends Modem instead of the Cogeco one
[code]...
OS: Windows 7 Home Premium 64-Bit
System Manufacturer: Acer
System Model" Aspire M5802
Processor: Intel Core 2 Quad CPU
RAM: 8GB
Graphics Card: AMD Radeon HD 7800 Series (7850 to be exact)
View 3 Replies
View Related
Feb 24, 2007
Can your wireless router do a ping test to 66.161.11.90 [URL] or any other [URL] for that matter?Mine can't, either with my wireless PB G4 running OS X 10.4 or wired Dell running Windows XP. I tried it with a wrt54g v5 & wrt54g v6 both tests got a 'request timed out' with 100% packet loss. v5 had the latest firmware, v6 is still at 1.00.9
View 3 Replies
View Related
Mar 4, 2013
I'm facing a problem regarding loss of ping packets when i do ping test from nexus3k to another nexus3k connected directly.however there is no error counters on the interfaces on both of devices.the ping failutre is occurring only whenever i do ping test with a large number of ping packets.I don't see the ping loss symptom with default ping test (default ping test is 5 packets).
H/W : N3K-C3548P-10G
S/W : 5.0(3)A1(1)
nexus3k# ping 1.1.1.2
PING 1.1.1.2 (1.1.1.2): 56 data bytes
64 bytes from 1.1.1.2: icmp_seq=0 ttl=254 time=2.732 ms
64 bytes from 1.1.1.2: icmp_seq=0 ttl=254 time=2.732 ms
[code].....
View 2 Replies
View Related
Feb 23, 2011
We are facing issue of continous packet discards On nexus4001L link (int po2) to Nexus5020 switch. Nexus4001L is installed in IBM blade center server and we have FCOE enabled in this setup. [code]
View 2 Replies
View Related
Dec 12, 2012
i am implementing tcp as per rfc 793, i have one doubt, while sending first packet, if that packet lost means, tcp will wait for RTO and retransmit the first packet, and after got the ack for first packet, then only it will send second packet or without getting the ack for the first packet it will send second packet.
View 7 Replies
View Related
Apr 18, 2012
My workplace has a UC-540 attached to a cable modem, attached to the world wide web.
When we make VOIP outbound calls through the standard ISP, there is no auditory packet loss sympton; however, when we make calls to out sister branch through our VPN, we experience auditory packet loss symptoms.
I would think the VPN should only be affecting the encapsulation of the data. To my understanding the VPN packets and non-vpn packets all hit the router at the same time, and transport over the web in the same manner. Why would there be packet loss over only the VPN??
--Regarding QoS, if a standard layer 3 device receives a VOIP packet encapsulated in a VPN, do the QoS bits in the VOIP packet get acknowledged, or are they hidden by the VPN encapsulation?
View 8 Replies
View Related
Mar 29, 2012
My ping is 35ms my DLS at 45.6 Mbps and my Upload is 4.51 Mbps. My Problem is that i am losing about 60 to 90 percent of the packets on a pingtest.net.
View 1 Replies
View Related
Aug 10, 2011
For about the past 2 or 3 months, I have been experiencing outbound packet loss at about the same time every evening. That timeframe is about 7 PM - 10 PM. This is most noticeable on Teamspeak 3 because of the voice disruption that other users report to me.
View 1 Replies
View Related
Feb 19, 2013
I have recently switch internet to Time Warner. Since the day I got it, i have experienced random packet losses of 100%. I have called time warner and they are going to send a tech out. But i would like to know more about this before he comes. I have replaced the modem with a brand new one. Surfboard SB5101N from the one i was leasing from them. They both do the same thing. I have made sure all my Drivers are up to date. I have replaced the coax cable and Ethernet cable and ran my Anti Virus and Spyware program. It does it more during online game, I have reinstalled the game and was having no problems with the ATT Dsl i had before this.
View 14 Replies
View Related
Dec 13, 2012
I'm having an issue with packet loss during the same time every day at 12:20PM. I checked scheduled tasks, ran wireshark, made a static ARP entry, and ran ping tests. The ping tests show packet loss only when pinging 1 DB server to 1 App server. When the packet loss happens everyone on the network connected to the DB gets kicked out of the DB. They are eventually able to reconnect but its annoying that everyday at 12:20pm they get kicked out. Ping tests from the DB to the Firewall stay constant. But when I ping from the App server to the DB it loses connection at 12:20pm and when i'm remoted into the DB server i get kicked out as well. It's like at 12:20pm the DB server stops incoming connections for some reason.
View 7 Replies
View Related
Oct 27, 2011
I had all kinds of packet loss and I was ofcourse suspecting my ISP. But then I tested pinging my internal interface and found that it has packet loss as well. I have about 10% packetloss to my interface with 192.168.0.254, I have the same thing from several different inside hosts. My inside rule is the implicit one, any, any. service IP.In the log I can see a teardown and build of the icmp whenever the packet loss accour.There is no packet loss pinging the outside interface from the internet.
View 3 Replies
View Related
Jun 28, 2011
I´m having a problem/issue with my CSM. I have a WS-X6066-SLB-APC - Version 4.2(1), installed on a 6500, and for a while now whenever I ping the VIPs (vservers) I detect some packet loss (In 10.000 ping packets, I loose around 1%), and higher response times; If I ping the reals I see no issues, only with the L3 behind the CSM.
View 11 Replies
View Related
Mar 3, 2011
3 days ago it worked just fine but not anymore I've run a packet loss test and the result is 100% loss. I don't know why. The internet is really slow, it is unusual. I'm using wireless network. Oh, I'm using windows XP SP3 (laptop) I am not really good at computer and I'm wondering if this problem is caused by virus, malware of something like that.
View 10 Replies
View Related
Apr 5, 2012
I have a Windows 7 desktop (so it's NOT wireless) that is having problems with packet loss. Now, the modem is fine, I've tested 'pingtest' on some laptops and the packet loss is very minimal. I've tried reinstalling the drivers for the LAN controller, using a different ethernet cable, using the 'winsock' reset command, and I have no luck. This does effect upload times on YouTube, to where a minute long video takes an hour.
View 14 Replies
View Related
Dec 15, 2011
I started using Windows 7, on two different computers. I get pretty bad lag spikes while using Skype and playing online games. They occur about once per minute and last maybe one second. There is a "Network Throttling" fix floating around the internet which I have tried, to no avail. I don't know much more about computers than a basic understanding, and am completely new to Win7.
View 14 Replies
View Related
Mar 2, 2011
We have a tandberg 6000mxp on a network without QoS. We see packet loss on the tandberg counters and NOT on the network anywhere. A network trace also showed no errors.
View 1 Replies
View Related
Jan 25, 2013
But I have finally diagnosed the problem. When I try to play games like Combat Arms, Arma II /OA, BF3 and run a ping test on pingtest.net my ping is steady, and my jitter is fine but the packet loss is ridiculous! I will have a packet loss of 90-100% causing the game to be unplayable. But when I run this test playing WoW I have 0% packet loss, steady ping, and good jitter. I am completely lost on what to do, other than contact my useless ISP that will not know what to do. I am really frustrated by this and am not sure what the cause of this is or what to do. I have been researching for over a week and have no where else to turn.
View 2 Replies
View Related
Sep 16, 2011
I am having issues where different laptops are dropping packets when communicating to the WAP on the RV220W. I have placed 3 laptops directly next to the router so there is no chance for walls to interfere. From each machine 1 at a time I perform a continuous ping. Here is a quick output from one of them:
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
[Code].....
View 14 Replies
View Related
May 7, 2013
I have two routers, Cisco 3825 and 2811 connected via a p2p ethernet link. The two sides of the links have Huawei muxes with 100/ full duplex set on their interface. I am facing almost 40% packet loss but the supplier is unable to identify any issues at their end. We have tried setting different combinations of duplex and speed settings but no improvement. When set to auto/auto the interfaces are negotiating to half duplex and I am sure this is the cause of the packet loss. Also I heard of auto-negotiation on MUX ports but supplier confirmed no such settings but only 100 Full duplex. If the router iterface is negotiating to half duplex so I suppose there is some thing with the negotition problem with MUX and router port ?
On C3825 I have a Gig interface whileas C2811 has fastEthernet. I guess Gig interface should not negotiate ? Is there a way to pin point the exact fault to supplier ? Also is there work around for this?
View 7 Replies
View Related
Jun 15, 2011
Internet usage is very slow when initially opening a site from LAN clients. Once established it is OK. If I ping a site from an LAN client by either host name or IP address it takes about 5 seconds, drops the first packet then is fine after that. if I ping it again immediately afterwards it is fine. But if i wait 2 minutes and try again the problem returns. So I would conclude that seeing it is the same whether I use Host name or IP address it is not a DNS issue. Pinging from the router produces no fault at all. [code] I can ping the router internal and external interface or any internal ip or hostname from the LAN with no delay or hesitation so it is not a switch interface or network card problem.Some sort of NAT issue maybe? [Code]
View 7 Replies
View Related
Apr 14, 2013
We have a customer running a Asterisk based Phone system, using Snom 320 phones and a ESW-520-24P as their switch.
Recently we have been confronted with an issue where every 35 seconds their is a very obvious drop of audio for both parties of a call. We know it is not the phone system as we have run tests directly over the BT copper lines that have no drops what so ever. Unfrotunately when we introduce the LAN in any way, we get the drops every 35 seconds.
We are running the whole solution on 1 vlan, yes I know probably better to use two, but the Cisco cannot automatically detect the Snom 320 phones to swap it to another VLAN, which complicates using a VLAN setup.
I really need to work out how to stop these packet drops, but I am new to the world of Cisco and dont really know where to look or what to try.
View 1 Replies
View Related
May 12, 2011
Scenario:
Central Router (WAN: 1.1.1.1) <--> Internet <--> (WAN: Dynamic IP) Branch RouterTunnel 172.31.254.1/26 Tunnel 172.31.254.9/26
Central router is a Cisco 1811 running IOS c181x-advipservicesk9-mz.151-4.M.bin.Branch router is a Cisco 1941 running IOS c1900-universalk9-mz.SPA.151-4.M.bin.
When I do a Ping test directly from the branch to central router over the Internet I have no packet loss:
branch#ping 1.1.1.1 source GigabitEthernet 0/0 repeat 1000Type escape sequence to abort.Sending 1000, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:Packet sent with a source address of 192.168.0.100!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!(...)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Success rate is 100 percent (1000/1000), round-trip min/avg/max = 40/41/60 msbranch#
When doing a Ping test over the DMVPN tunnel (which is using the WAN IP as source) I see packetloss.
branch#ping 172.31.254.1 source Tunnel 3 repeat 1000Type escape sequence to abort.Sending 1000, 100-byte ICMP Echos to 172.31.254.1, timeout is 2 seconds:Packet sent with a source address of 172.31.254.9!!!!!!!!!!.!!!!!!!!!!.!.!!!!!!.!!!!!..!!!!!!..!!!!!!!!.!!.!!!!!.!!!!!!!!!!!!.!!!!!.!!!.!!!!!!!!!!!..!!!!.!.!.!!!!!.!!!!!!!!!.!..!!!.!.!!!!!.(...)!!!!!!.!!!.!!!!.!!!!.!.!!.!!!!!!!!!!!!!!!.!!.!!!!!!!!!.!!!.!!.!.!!!!!...!!!!!!!!!!..!!!!!!Success rate is 79 percent (795/1000), round-trip min/avg/max = 40/43/568 msbranch#
Central:
interface Tunnel0 description Testing (DMVPN) bandwidth 10000 ip address 172.31.254.1 255.255.255.192 no ip redirects ip mtu 1400 ip nhrp authentication testing ip nhrp map multicast dynamic ip nhrp network-id 1 ip nhrp holdtime 600 ip nhrp redirect ip tcp adjust-mss 1360 no ip split-horizon eigrp 1 tunnel source FastEthernet1 tunnel mode gre multipoint tunnel key 100003 tunnel bandwidth transmit 10000 tunnel bandwidth receive 10000 tunnel protection ipsec profile secure_profile shared
Branch:
interface Tunnel3 description Testing (DMVPN) bandwidth 2000 ip address 172.31.254.9 255.255.255.192 no ip redirects ip mtu 1400 ip nhrp authentication testing ip nhrp map multicast 1.1.1.1 ip nhrp map 172.31.254.1 1.1.1.1 ip nhrp network-id 1 ip nhrp holdtime 300 ip nhrp nhs 172.31.254.1 ip nhrp shortcut ip nhrp redirect ip tcp adjust-mss 1360 no ip split-horizon eigrp 1 delay 1000 tunnel source GigabitEthernet0/0 tunnel mode gre multipoint tunnel key 100003 tunnel bandwidth transmit 2000 tunnel bandwidth receive 2000 tunnel protection ipsec profile secure_profile shared
Crypto parameters on both central and branch routers:
crypto isakmp policy 1 authentication pre-share
crypto ipsec transform-set secure_transform-set esp-3des esp-sha-hmac mode transport
crypto ipsec profile secure_profile set transform-set secure_transform-set
I disabled CEF on both the central and branch routers and no success. The EIGRP neighborship appears to be stable.
View 4 Replies
View Related
Mar 18, 2012
my local network another pc packet loss
View 1 Replies
View Related
Nov 28, 2012
I've been having an unusual networking issue lately, where everything runs smoothly apart from when one user's laptop is connected to the WLAN. All users on the network get something between 20% and 60% packet loss, only when this user's laptop is connected. I've made sure all the TCP/IP settings are reset to default, I've reset the router to factory settings, but the problem persists. This only came on recently, and I don't believe anything changed.
View 2 Replies
View Related
Apr 21, 2013
My problem is that i have a packet loss of like 2% to 6%, which is a lot considering that i play a lot of Online games, causing lag spikes and net frozes.I will say all the information i can about my pc.My PC hardware hasn't been modified, so the manufactor page ( ) tells what is installed in my pc.About software, i need to find if this problem is software-based, my AV is Microsoft Security Essentials and i use MalwareBytes too.About how im connected, im connected via Wireless to a router. (dunno model, i just know its a encore router)
View 3 Replies
View Related
Apr 2, 2011
For about 7/24th of the day it'll be fine. But the rest of the day it will be riddled with burst packet loss. For example when I'm pinging.It'll go "Done
Done
Done
Done
Done
Request timed out
Timed out
Timed out
[code]....
Due to how it's only certain times it happens and other times it's perfect leads me to believe it's my ISP.
View 9 Replies
View Related
Jan 24, 2011
How do I fix packet loss on VOIP? Teamspeak, Skype, MSN Voice all have inbound jittery clipped robotic voice. Teamspeaks shows "total" packet lost, climbing to at least 20% with Speech packet loss 50-65% then I lose connection altogether. All other network programs (Firefox, streaming music, videos, online gaming) work fine.I have ATT DSL, using a Netgear Wireless G Router w/ built in Modem (model DG834G). The network has 1 attached device, my Dell laptop (which is usually powered off).The packet loss problem is identical on my desktop pc and laptop (both using the same network). Problem exists when nothing else is running, only Teamspeak (or another VOIP) I have replaced all wires, cables, filters. Power cycled modem. Problem exits with or without Port Forward.*running Windows 7 {64 bit}, AMD Phenom 8450 Triple Core, 2.11ghz [3gb RAM] Asus M3A78 Pro Motherboard
View 3 Replies
View Related