Connect To Wireless Router (Netgear WNR1000) It Says Identifying?
Aug 10, 2012
For a while now when I try to connect to my wireless router (Netgear WNR1000) It says "Identifying..." for a while, but then it will disconnect . My wireless only works sometimes if I reset the router every once and a while. Even then it will connect properly with my computer for two days tops. The wireless works on the other computers in the house, just not mine. I've checked all of the wireless settings to make sure they match correctly to the network .
View 14 Replies
ADVERTISEMENT
Aug 17, 2011
I am trying to extend the network within our church. The main router currently being used is a NetGear WNR1000. I have two spare lynksys routers (WRT150N and aWRT54G). Can I connect them wireless to extend the network throughout the Church? If so, do I have to hard wire the first two routers or can this be done through the wuireless connection?
View 1 Replies
View Related
Jul 12, 2011
I have a wireless router Netgear WNR1000 N150. I am wondering if I can use it as an access point/ repeater, and if I can, how to set it up. The modem provided by the ISP is in the room with the desktops; can I place the wireless router in a room
View 2 Replies
View Related
Feb 6, 2012
I have a NetGear WNR-1000 wireless G router. I currently only have 1 computer hooked up but I have had 3 computers hooked up to it before. It doesn't matter what internet it's connected to or how it's connected to the modem itself. I have had DSL and Cable hooked up to it and I am currently using it as a secondary router behind my roommates old Wireless B router. He currently has all of his things hooked up via ethernet and wirelessly to his router. So, im download the xirrus wifi inspector thing. It doesn't matter the OS either. I've had XP sp3, vista, and 7 all hooked to it and it's the same all the way around and it doesn't matter the kind of wireless card either!
View 1 Replies
View Related
Dec 18, 2011
I recently bought a Netgear WNR1000 to replace a POS belkin router that was acting up.
Pinging Google over wireless from 20 feet gives a response of around 500ms. A wired connection through the router gives the same result. A direct connection however gives a response of 50ms. I ruled out any file transfers or piggybackers on the network. ISP is Time Warner.
Here is my ipconfig Windows IP Configuration Wireless LAN adapter Wireless Network Connection:
View 5 Replies
View Related
May 25, 2011
I cannot get my computer to recognize my Netgear WNR1000. I have called Netgear to explain the issue and was on the phone with them for 45 minutes.They did get the laptop to work but my desktop still does not. They told me it was a browser error. If I disconnect the ethernet cable from the router to my computer everything works perfect.I tried to reinstall the CD that came with the router and as I try to get through step 2 it says no router detected.I think this is my hold up but I have no way to know how to fix this. I tried to go on the Netgear website and they tell me that I have to be able to connect to the internet to download through the router. Well I can't do that because obviously that is the hangup. If I click on my Network Connections. It shows my computer connected to a Network with limited capability and then a big red X going to the internet.
View 3 Replies
View Related
Dec 19, 2011
I have a Netgear wnr1000 v3 router. & At about 12:00pm central standard time. It kinda messed up.. This is the Problem.. I have seen this "Local Area Connection" Doesn't have a valid IP configuration. I've browsed and browsed and browsed.. Over and over trying every solution. It's gotten me so frustrated.. I don't want to return the router.. Nothing works for me.
View 2 Replies
View Related
Sep 2, 2012
A day ago, I was having trouble with my apartment modem, and due to a busy schedule, was only able to do a quick "Unplug and reset" which seemed to work at first, but eventually it stopped working all together. Today, I traveled from my apartment to my "home" home, where the wireless network is set at a "Home" security level. However, my wireless now will not connect at all. It continues to cycle through "Identifying" yet cannot make the connection. It works through a LAN connection however.So far, I've attempted the follow:
- run>ipconfig/all, ipconfig/reset, etc
- winsock reset
- system restore
My computer is a Samsung RC512, running windows 7. Here's the paste from my ipconfig/all:
Windows IP Configuration
Host Name . . . . . . . . . . . . : PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hsd1.pa.comcast.net.
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : DC-A9-71-93-16-52[code]....
View 1 Replies
View Related
Aug 22, 2010
I am currently using a Dell Inspiron with Windows 7 and I am having issues connecting with my wireless router. It is a Netgear WNR1000 v2. I live in an apartment with two other guys and both of them are able to connect to the router perfectly, and one of them has the exact same computer as I do. We have other wireless networks around our apartment that aren't secure and I can connect to them but I can't connect to the secure router.
View 2 Replies
View Related
Jan 21, 2012
i have tried many things i have tried to reset my router with the cmd prompt i have checked my drivers i have tried the simple things and at this point.
View 1 Replies
View Related
Feb 19, 2012
It all happened pretty suddenly, from 1 day to the other, suddenly i was unable to connect to my home network. I started to troubleshoot, search forums etc. But no luck. I triedand look for the problem myself and found that thenetwork was enabled but it stayed on "identifying network". By clicking buttons from here and there on thecontrol panel i found something like a network recognition or something like that and a yellow little prompt appeared on the top of the explorer saying something like the network idetification was disabled, so i clicked and selected enable but it prompted again, so i just entered to the advanced network recognition center and noticed that on the public and private tabs netowrk recognition was disabled, so i clicked enable on both and saved changes, but the changes dont save, its like if i wasn't on a administrator account (but i had no error messages, it just wont enable).
View 19 Replies
View Related
Mar 28, 2013
I'm thinking of purchasing a Cisco Linksys EA6500. I need a router that can one monitor bandwidth used by device. Keep exceeding our ISP's network bandwidth allocation, need to identify the devices that are causing this high usage and be able to do so from the router. Does the EA6500's standard software support this, is their router software one can obtain for the unit that does this or is there another home router option that can perform this function?
View 6 Replies
View Related
Feb 26, 2012
Child at college having significant connections issues with Sony VAIO VPECB trying to connect to Netgear N300 wireless router. Upped the bandwidth - no impact. Other MACs in the house have no issue.
View 1 Replies
View Related
Mar 27, 2011
i am trying to connect my netgear wgr614 v7 wireless router and i can't do it. i have the actiontec m1000 modem which is thru qwest i have read the setup manual available online on how to setup the modem with the router but it just doesnt do anything?
View 2 Replies
View Related
May 7, 2013
Region : Italy
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Vodafone IT
Basically, the 3g port is absolutely not working in both devices.I've tried with 4 usb 3g adapter (all huawei and listed under compatible), THEN i bought a MA180 (yes, the TP-LINK 3g usb stick) and even this is not working.The MR3040 if i connect the MA180 simply will blink the MR3040 3g led ONCE, after that it simply does nothing.if i go under the status page on 192.168.0.1 it basically says:"3g usb: Identifying.." and it still stops there for even an hour.Same on the MR3020.
View 1 Replies
View Related
Feb 26, 2011
I cannot connect through my wireless router (Netgear WNDR3700) WITH MY INSPIRION DUO. I can connect with a verizon MYFI wireless card, and alo through ethernet on Duo. I get "Problem with wireless adapter or access point" The software driver is newest. System ism W7 Home premium
View 1 Replies
View Related
Feb 27, 2012
aptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies
View Related
Oct 22, 2011
I have to reconfigure the wifi connection everytime a new laptop comes into my house -- and we can only use one computer at a time with this router...huge problem with a big family..
View 1 Replies
View Related
Jul 25, 2012
I've recently been on a kick of acquiring a small collection of the old school stackable Linksys equipment, and in one of my searches I came across a picture of one I'd never seen before.
View 4 Replies
View Related
Sep 29, 2011
I have a pretty basic NETGEAR router right now. I have a Zyxel modem that Centurylink sent when I signed up for my DSL service. The Zyxel modem connects to my NETGEAR router. When I play online either wireless or wired from the Netgear modem I have major connection issue.However, if I disconnect from the netgear modem and connect from the Zyxel directly to the ps3 I have zero problems.
View 19 Replies
View Related
Sep 16, 2011
I am trying to set my NETGEAR N150 DGN1000 .I can connect to the router via wireless but no Internet.Theh INTERNET PORT indicator on the router is goes to OFF mode.Before I try this I had Internet with the same line with a different router..
View 3 Replies
View Related
Oct 22, 2011
I am using a Netgear Rangemax Wpn824 with comcast cable internet. This problem happened also on an older router but less frequent with this one.
I don't know if this is a common problem but I cannot seem to find it on the web and thought I would ask here. The problem seems to only happen after someone restarts their computer.
What happens is 9/10 times on startup the internet will connect just fine but the 10% of the time it will say "Unable to connect to Shaun" (my wireless router) Sometimes if we restart the computer it will fix itself but usually we have to reset the router and it will fix itself and wont happen again for another couple of weeks.
I called comcast about it and their tech support said it was a router issue, that's when I put in my newer one (the rangemax) and its still happening. We even upgraded the comcast modem recently too, and since it fixes itself when I reset the router I don't doubt its the router.
I can't seem to update the firmware on it, not sure if that will work. (It says not enough memory to complete) Should I buy a new router?
View 9 Replies
View Related
Feb 27, 2012
i have Toshiba laptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties.
View 1 Replies
View Related
Oct 13, 2012
I'm trying to connect my cannon printer to my laptop. I have a Netgear Wireless Router. My wifi is passworded. I can't get past the access point. I'm stuck in set up mode. It wants me to hold down the access point on my router and I don't have an access point button on the router.
View 1 Replies
View Related
Jul 4, 2012
I just bought an E2500 router. I have until now been using a Netgear DG834G v5.
I have tried multiple times but my success has been limited. I turned off DHCP in the Netgear, set the isp login question to no, and set it into bridge mode. I managed to use Cisco Connect to connect the Netgear and the E2500, but there was no internet.
I logged into the E2500 and entered by ISP details in the PPPOE section. I went to status and clicked connect, but a message would eventually pop up saying that an IP address could not be found. In the Netgear I could set up VPI and VCI etc manually, but can't find those settings in the E2500. My ISP also requires a dynamic IP - does this mean that DHCP must be off in both the Netgear and the E2500?
I factory reset the E2500 and tried Cisco Connect again, but it said that it couldn't find the device.
View 1 Replies
View Related
Feb 24, 2012
I would like to connect a WRT54GS to a Netgear FVS318 router to proivde wireless access to my network. My current setup has my DSL modem connected to the FVS318 to provide my network computer with wired internet access. Can I simply connect the WRT54GS to the FVS318 using the LAN port? I've read other threads that mentioned changing the WRT ip address to 192.168.0.150 and disabling DHCP. i've don'e both, but I still don't get wireless access. My wireless devices can connect, but they don't have internet access. I have some questions below:
1. In the WRT setup, what do I use for the Internet connection type? Since my Netgear has that information already, do I need to put anything here?
2. In Setup -> Advanced Routing, do I neet to change the operating mode to Router?
3. Any other configuration changes that I need to do?
View 3 Replies
View Related
Feb 9, 2012
I had a Linksys WRT54G Router with a Netgear GS116 Switch and everything worked great. Upgraded to a new Linksys E4200 Router for faster wiress, default settings, and it won't connect to my switch, here is the breakdown...- No LED's light up when I plug the Switch into the E4200 LAN ports via patch cable (Switch has auto uplink so no crossover needed)- E4200 Ports work fine when I plug devices directly into them, LED's light up and everything.- Switch works fine when connected to the WRT54G, LED's on both devices light up when connected to eachother.- Tried different ports, different patch cables, even tried setting E4200 to bridge mode to just see if I could get the LED's to light up.
View 3 Replies
View Related
Mar 3, 2012
I recently puchased a new E4200v2 router and one of the devices that I have on my network is a Level1 WCS-2040 wireless network camera. My old router was a Netgear WPN-824. I was able to (and I'm still able to) connect the camera to the Netgear router with WPA-PSK but not to the new E4200v2. The only way for me to connect it to the new router is with WEP, which I obviously do not want.
I'm at a loss for what the problem is because the setup is easily done. I'm thinking it's an issue with the E4200v2 but I'm not sure what... hoping that the issue could be resolved in the next revision of the firmware. I've tried WPA2/WPA Mixed Mode, WPA Personal (which I understand is the same thing as WPA-PSK) and WEP. The camera supports WEP and WPA-PSK. When I have the camera configured with WPA-PSK it simply isn't connecting to the E4200v2, only the old netgear.
See screenshots below:
Netgear router wireless config:
Netgear router connected devices (shows laptop and wirelss camera):
IP Camera config while connected to old router:
IP Camera working on old network:
E4200v2 wireless status:
IP Camera config while connected to E4200v2 router (via wired connection, not wireless):
When the wired connection is removed from the camera and powercycled, the E4200v2 does not list the camera as a connected device. I've power cycled everything, multiple times and tried everything I know of. What could be the problem? Note that the MAC address for the camera is the same for both wired and wireless adapters. And no, Password1 is not my default password... just what I was testing with for the purpose of screenshots.
View 9 Replies
View Related
May 6, 2011
I have a desktop and laptop and im on my desktop which has internet...I have a wireless router that is working and its called:NETGEAR WIRELESS-N 150 ROUTER WNR1000V2. The router network comes up on my laptop when I look for avaliable networks but..I try to connect and type in the exact password for the router but says "windows cannot connect to network" On my laptop im running windows vista home premuim service pack 2. This all starte 2 days ago when i knocked the outlet out that ha the power to our computer and i tuned it on and my laptop wont connect
View 5 Replies
View Related
Feb 27, 2011
I have a Netgear N300 Wireless Router (WNR2000), and I am trying to connect the internet through it. The internet light stays amber, and though the router recognizes it, I can not connect to the internet. My computer also doesn't seem to recognize the router at all. Installation CD will not work either.
View 3 Replies
View Related
Mar 6, 2011
I have existing wireless system router "Netgear wireless G router WGR614v9" and connected to DELL PC and laptops (two) and both are having window XP system.I have old computer ( Toshiba Satellite 335CDT with window 98 and I want to connect this to my existing wireless system.
1. Can I do this wireless connections.
2. If yes than how to do it, step by step.
View 1 Replies
View Related
Jun 28, 2011
I've just installed a new wireless router (Netgear wgr614v9), but I'm having trouble getting an Acer Aspire 1 (with Linpus Linux) to connect. All other devices within the house can connect (iPod, mobile phone, other laptops), but this laptop wont.It was connected but it disconnected itself and now refuses to connect. Clicking "Connect" on the dialog does nothing. The OS is possibly the worse I've ever used, but there doesn't seem to be much you can upgrade it to.The router is protected with "WPA-PSK [TKIP] + WPA2-PSK [AES]" according to the router setup, it's name is unique and password 8 chars long.
View 4 Replies
View Related
Mar 22, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : V2
ISP : Reliance netconnect Vendor (ZTE Model AC2736) CDM
Region : India
Just now I bought this router. When I am trying to configure it with default firmware is not identifying the modem itself. So Afyter facing this problem, I updated my Router firmware(TL-MR3220_v_2_120822) and retry the process. But this time, It identified the modem for few seconds, then its changes its trying to connecting, after that its change it state to unplugged.
View 1 Replies
View Related
