I will be purchasing the AV200 powerline kit from Tp-link and want to know whether there will be any issues in connected them through either a power strip or double adapter?
View 8 RepliesI want to add a cisco or netgear powerline adapter to a building.I have read that for home it works really good, but i am going to add it to a building--A 5 floors building.So i would like to know if anyone has done this before and it works. This is a commercial building.And it is not easy to run cables, that would be the second option if the powerline do not work well.
View 3 Replies View Relatedif it would be possible to use a powerline adapter to connect a to second router? I'm currently hardwired like this, but I'm just wondering if powerline would work the same way, as I'd like to switch which room the wireless is running from.
View 3 Replies View RelatedI am trying to connect a sony blu-ray player to the internet using a powerline adapter but the BR player does not connect. I currently have two Satellite DVR receivers using the same powerlines and they work fine, but the Sony player does not connect to the network. I have to try a wired connection because my wireless signal to the player has trouble with netflix and other download services. Connection gets lost.
View 5 Replies View RelatedI have a NETGEAR XAVB101 Powerline AV Ethernet Adapter and an AMD Llano build HTPC which refuses to work with each other. The power plug works well with my Gateway NV79 laptop and even my Intel Core i5 -2500K desktop, without any problems! I have also used it to connect to my Roku, Yamaha Network Receiver and other networked stuff and all worked great, just the HTPC seems to have issues connecting to the network!The HTPC is AMD A6-3650 on a ECS FM1 A75 Mobo with Integrated Realtek RTL8111E Gigabit Ethernet Controller, which is what I am connecting the power plug to! Only the connection over the power line adapter does not work, it works great with both a connection directly from the router and with wireless!
The adapter has a 128 bit encryption push button security feature which I'm NOT using. When I connect it the HTPC tries to connect and fails and shows the network as connected to an unidentified network. My LAN drivers on the computer is all up-to-date.
I have a D-Link DIR-655 version B1 Just installed firmware 2.03 Use a cable modem (Comcast) Motorola SURFboard model SB6120 Am trying to use Netgear 85Mbps Wall-Plugged Ethernet Adapter XET1001 to carry signal from the room where the cable modem is to another part of the house where I hope to connect the D-Link.
View 14 Replies View RelatedI have a NETGEAR XAVB101 Powerline AV Ethernet Adapter and an AMD Llano build HTPC which refuses to work with each other.
The power plug works well with my Gateway NV79 laptop and even my Intel Core i5 -2500K desktop, without any problems! I have also used it to connect to my Roku, Yamaha Network Receiver and other networked stuff and all worked great, just the HTPC seems to have issues connecting to the network!
The HTPC is AMD A6-3650 on a ECS FM1 A75 Mobo with Integrated Realtek RTL8111E Gigabit Ethernet Controller, which is what I am connecting the power plug to! Only the connection over the power line adapter does not work, it works great with both a connection directly from the router and with wireless!
The adapter has a 128 bit encryption push button security feature which I'm NOT using. When I connect it the HTPC tries to connect and fails and shows the network as connected to an unidentified network. My LAN drivers on the computer is all up-to-date!
my goal is to share my cable modem signal over my two story house using two wireless routers. The delima is that the routers don't support wireless bridging and if they did, the signal is too weak to make it worth while.
The remedy I came up with... buy a pair of powerline network adapters and connect one router to the other so I could have a good signal upstairs and then a good signal downstairs.
Downstairs, I have the cable modem connected to the Linksys WRT54G router, which has a line out to my blu ray player, wirelessly feeds a PC downstairs and then has a cable run to the powerline adapter.
Upstairs, I have a cat5 connecting the powerline adapter (which was tested and works with laptop) to the data input port on my second wireless router, the netgear wndr3400.
I can't get the netgear upstairs to pull an IP address from the linksys router downstairs over the powerline network.
My company's spent the last few weeks struggling with an issue with their VPN backups where select packets were being lost.
View 7 Replies View RelatedWe are currently evaluating a ACS 1121 running 5.2, we are trying to configure this to Authenticate eap-peap requests.
Our users will be using credentials in a username@example.com format, if the server sees a request using username@anotherrealm.com then it would forward the request to a external proxy radius server, if the server saw a request for our domain it would strip off the @example.com part and authenticate against AD.
Im finding it hard locating documentation to tell the server if a request comes from a NAS using username@example.com then strip @example.com and authenticate username against AD.
I've lost the original power adapter that came with my wireless router (Netgear N150 Wireless Router WNR1000v2) and was wondering if it would be safe to use another power adapter with it instead. As long as the power adapter meets the the requirements of the router and fits, it should be okay to use, right? I'm just wanting to be safe before plugging it in. Don't want to damage anything.
View 1 Replies View RelatedI currently have a pair of NETGEAR XAVB2001-100NAS Up to 200Mbps Powerline AV 200 Adapters. Can I just add a third unit upstairs (like url...) and all three ports will have connectivity to each other?
View 2 Replies View RelatedI would like to ask the correct part number of the power adapter on WAP4410N?
View 4 Replies View RelatedWe are looking for a power adapter for a cisco switch Sf302-08p. We can't find the adapter anymore and we have to order a new one, but we can't figure out the order number of the adapter. The voltages is 48vdc and has an 4 pin connector . What is the type or ordernumber of this adapter?
View 1 Replies View RelatedIs there a power adaptor that you can purchase to use with the AP541N.
View 4 Replies View RelatedI'd like to ask which Power over ethernet adapter will work in 100% with WAP4410 AP??
View 2 Replies View RelatedWe are planning a wireless network using the 1602i APs. Some of our APs might or might not be within the 100m limit from the switches, so we'll be running them as repeaters instead. Right now, we are planning on buying power injectors for everything, but I can't seem to find an answer to this question:
If I'm running an AP as a repeater (no ethernet running back to a switch), can it still receive power from a power injector and a short ethernet run between the injector and the AP? Or will I need to use a power adapter?
I lost my power adapter for the WRT54G router. I have a 12V / 1000 mA brick adapter.
View 5 Replies View RelatedFrom what I understand, it requires a 5V 2.5A adapter ... alas, cannot find one.
View 2 Replies View RelatedWhat is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?
View 11 Replies View RelatedI have a NETGEAR XAVB101 Powerline AV Ethernet Adapter and an AMD Llano build HTPC which refuses to work with each other.
The power plug works well with my Gateway NV79 laptop and even my Intel Core i5 -2500K desktop, without any problems! I have also used it to connect to my Roku, Yamaha Network Receiver and other networked stuff and all worked great, just the HTPC seems to have issues connecting to the network!
The HTPC is AMD A6-3650 on a ECS FM1 A75 Mobo with Integrated Realtek RTL8111E Gigabit Ethernet Controller, which is what I am connecting the power plug to! Only the connection over the power line adapter does not work, it works great with both a connection directly from the router and with wireless!
The adapter has a 128 bit encryption push button security feature which I'm NOT using. When I connect it the HTPC tries to connect and fails and shows the network as connected to an unidentified network. My LAN drivers on the computer is all up-to-date!
What is the orderable part number of Cisco 892 series routers.
View 1 Replies View RelatedMy Dir-615 stopped working some weeks ago and I switched to another router until I had time to look at it. Tonight I checked the ps voltage and it read exactly +5v but just for a test I tried another 5v ps (which tested a little higher) and it worked. The ps that works reads about link +7vdc. Before this the power light came on with the occasional blink but I could't connect.
View 5 Replies View RelatedHow do I disable the power management feature that slows my NIC down when I am on battery power?
I have a dell e6500 with a Intel 82567LM Gigabit LAN card that always connects at 10Mbps when I plug in the ethernet cord when I am on battery power, I've tried using different routers (I have two gigabit routers and one 100 mbps router)... it still auto-negotiates at 10 mbps I've tried using different cat6 cables, it still auto-negotiates at 10 mbps.I've checked the drivers, I have 10.0.6.0, which is the latest from the support.dell.com website.
However, the minute I plug in the laptop, the NIC connects at the proper speed. Essentially, when the laptop is using battery power, the NIC decreases it's speed to 10 mbps. When I plug the laptop in, the speed jumps up to what it should be (either 100 mpbs or 1 Gbps, depending on which router I'm plugged in to).
So, how do I disable this feature? I want to connect at the maximum possible speed, regardless if I am plugged in or not.
its possible to connect to the internet via usb adapter to my laptop, then connect an access point to my laptop so my ps3 can connect wireless?.....the reason i ask is my connection is on the 3rd floor, which cannot be moved, while my ps3 is in the basement and barely has a signal and keeps logging out out of psn....
View 3 Replies View RelatedMy adapter is not connecting to DSL router.I am using Window 7 ultimate
View 1 Replies View RelatedBasically I bought two ethernet adapters from amazon and have connected them up properly to the router and my laptop through my homes plugs. For some reason my laptop cannot pick up any internet signal from them displaying 'no network access'. When I've run the troubleshoot it occasionally will say that the IP address is not valid. I've tried a variety of different settings but cannot seem to get it to work.
View 7 Replies View RelatedI have a Toshiba Equium A200,(from new some time back) however, i have had it updated with new 500mb drive etc! I also some time back installed Windows 7 home. At first all was well, then a few months ago i noticed (upon star-up) that the network adapter was not connecting to my Belkin router? The Network & sharing centre tells me that it is connected, although the icon on the bottom toolbar shows a yellow triangle & reads No Internet connection? I have to go through the same process evrytime to get connected, which usually takes approx. 5 mins That is to follow the Network/share centre's troublshooting? I have updated the adapter Driver, yet still the problem exists?
View 3 Replies View RelatedI got this wireless Linksys ae1000 adapter about 3 weeks ago on amazon and it worked fine for 2 weeks by connecting to the Internet and it had excellent connection then it stopped detecting my network. I tried updating it with the Cd and it said it was up to date. The computer is a Compaq presario and is about 14 years old. I looked in device manager and there were no? s or !s in adapters.
View 7 Replies View RelatedThis only started to happen recently. when I log into windows, it creates a big fuss about connecting to my router...It takes a good 5 minutes of plugging and unplugging my adapter and restarting my router.
View 10 Replies View RelatedI have an HP Pavilion desktop computer running Windows XP Home Edition. It used to never get internet wirelessly for some reason until one day i played around with it. I don't remember how but I got it to go online and it worked ever since. Just recently i have moved from my previous home and have finished setting up both of our computers. The Vista (the one i am using to write this) is an Ethernet connection and is having no problem connecting to the internet. Although, the XP for some reason will not connect to the internet. The adapter will find the network but when i type in the WPA2 it tries to connect but i think it times out or something. I have tried several solutions and none have worked. My father has a Toshiba laptop and he is currently having no issue with connectiong wirelessly to the internet. Our old verizon router stopped working when we attempted to set it up after the move, so verizon came and istalled a new one. It is secured with a WPA2 code whereas our older one was secured with a WEP code. I think it might be a problem with either the router or the wireless adapter itself (which is a Linksys Wireless-B Network Adapter). Also, when i logged into my router manager thing, I noticed that under the network, it said the XP was an inactive Ethernet Connection and not Wireless.
Here are some of the XP's specs:
Hewlett-Packard Pavilion
Intel[R] Pentium[R]
4 CPU
3.40 GHz
0.99 Gb of Ram
I have TPNW721N wireless network adapter on my Compaq Presario sr1520nx. I am using latest driver. I am using Windows XP. Using Windows Zero Wireless.When I connect I get a red X under the red and side of wireless connect icon on system tray.
[URL]
It would not connect to the internet even after I click repair.If did an ipconfig /all and this is what I got-
Windows IP Configuration
Host Name . . . . . . . . . . . . : Myname
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
I'm trying to connect to the internet on another PC (on my desktop, not this laptop I'm sending this request on). I know my network is working OK, because I'm on it now (on my laptop), but the Realtek adapter is not connecting on my destop PC.
View 14 Replies View Related